Problem of shift of Samsung series 7 pen

Similar Questions

• Samsung Series 9 - connectivity Wi - fi Limited 8 Windows

  I have a problem with my mobile Samsung Series 9, Windows 8 running and use a Netgear Sky router. Only, it connects via Wi - Fi for 5 minutes before returning to limited connectivity. "Intel Centrino Advanced - N 6235' is adapter

  I searched on the internet and it seems that dozens of people have the same problem with Windows 8.

  Please can help you, I am without internet & urgently need a solution please.

  Thank you very much

  KdS01

  The problem has probably been reached.

  Since your laptop, search for "cmd", and then select the desired result 'cmd.exe '.

  A DOS window opens, in the DOS window type this

  netsh wlan show all

  All WiFi around your laptop will now be listed individually with its channel number and the strength of the signal.

  Review the list and choose a channel which is less used (or not) and the lower signal strength.

  Don't forget, you only have channels 1 to 11 to the choice. They are to each other as much interference.

  Now go to your router and change the channel to one that you just took. DON'T worry that your router said on the selected channel.

  That sees your router is not serious, what is important is what sees your laptop.

  You may need to move with your laptop computer in your House to find a 'good' receiver spot. Another location in your House can give different results. In addition, you may need to repeat this according to how your neighbor of WiFi to behave.

  Charles.

• Problem Bluetooth samsung series 7 700Z3A-S06 seeing is no longer compatible bluetooth

  I have a samsung series 7 700Z3A-S06, and I have a problem with bluetooth, simple software Manager there is an option to download the driver and he has set up a mistake I tried to download from the Samsung Page too and did not work. When the laptop came the bluetooth worked and easy settings it shows one option to activate bluetooth. Now he has disappeared and does not show that the laptop have integrated bluetooth.

  If you press Fn + F12, you have an option to turn on Bluetooth power, or simply wireless?

  There is a driver here, dated January 29, 2012:
  http://www.Samsung.com/us/support/owners/product/NP700Z3A-S06US
  (There is also an update for the easy settings program on the software tab).

  Go to control panel > programs and features and see if there is a list of Bluetooth (it may be something like Atheros Bluetooth or Intel Bluetooth). If there is, then uninstall it. Restart, and then install the one you downloaded. Reboot again and it should work now.

  SC Tom

• How do I share media between a100 tab (Clear.fi), Windows Vista Acer and Samsung series 6 tv?

  I have a Samsung series 6 tv DLNA, an Acer a100 (Android Honeycomb 3.2) with Clear.fi Tablet and a Dell WIndows Vista laptop.  I am not technically savvy... How can I set something to the top, so I can use my laptop or tablet to show movies, pictures, etc on my tv, just like all those great commercials?  Help, please!  Thank you.

  Hi PatGrantis,

  I suggest you to follow the steps in the link and check if it helps.

  http://Ars.Samsung.com/customer/USA/JSP/FAQs/faqs_view_us.jsp?AT_ID=145742&PROD_ID=41&PG_ID=-1&PROD_SUB_ID=0

  You can also check out the links below.
  http://www.Samsung.com/us/PDF/dlna_guide.PDF
  http://www.Samsung.com/ca/Consumer/learningresources/TV/beyondtv/dlna_faqs.html#.

• I have a problem with SHIFT + F5: "fill."

  I have a problem with SHIFT + F5 by default assigned to the 'fill' and using 'select all' instead... I have not done anything with the keyboard shortcuts...
  So I tried to reapply to SHIFT + F5 via keyboard shortcuts, but it still applies "select all"...

  Am I the only one having this problem? What can I do?

  What version of language is your photoshop and what version is it?

  You can check your actions (window > Actions) and see if there is a Select action > select all with shortcut SHIFT + F5 (SHIFT + F5) are attributed to him.

  Added:

  After checking the actions, I think that you might have the game responsible for orders and the SHIFT + F5 shortcut is assigned to growth (selection)

  Post edited by: R_Kelly

• Compatible with Samsung series 5 Ultrabook?

  Can I use Lightroom 4 on Samsung series 5 Ultrabook?

  Yes.

  the hard drive is a bit slow but otherwise it does not work.

• Samsung series 5 ultra touch screen tactile intermittent problems

  Hello

  Windows 8 is already installed when I bought the computer. Now sometimes when I boot it the touch screen does not work. The computer seems to think that this isn't a touchscreen, even in the PC info it says that there is no button or a pen. When I restart is always seems to fix the problem and then to the PC info, it says full touch support. I have to restart it almost every time I turn on the touch screen to get.
  Any ideas?
  Thank you

  The problem is probably Fast Startsup, faster PC boots, but all drivers do not always load but they will when you restart.

  Disable Quick start, your system will take more time to start, but it should solve your problem of dual-boot.

  Go to control panel > hardware and sound > Power Options, click on choose what the power buttons do, under stop settings, uncheck quick start if there is a check mark in it.  When you perform a cold start it will slow down the startup and touchscreen should take effect, but as I said, the start-up will take a little longer.

• Problem initializing shift register

  Hello

  I'm using labview 7.1 to control a spectrometer. In my program, I have a certain function that runs 32 times and adds up, and all works again n times. I use two 'loop' for s in the other. In the inner loop, I have a shift register to send information from one iteration to another, so that it adds. But I guess there is a problem with the shift register because I get just a blank chart after the loop runs. I used an indicator to check the output of the function, and it certainly works. I guess that the problem happens when I add up the results of two iterations. Sometimes when I would forget initialize the shift register that I use to have this problem, but this time I can't initialize the shift register because the option create a constant is disabled for some reason any. can someone help me please! Thank you!

  labview_dummy wrote:

  I'll try using a case structure and see if it helps.

  Seems to work very well here:

  

  labview_dummy wrote:

  I used the flat sequence structure because I donot want the spectrometer close vi to run before the loop that are parallel and not in series (they are all two cables to the first envelope and not to each other. Thank you!

  Can do "in series" by plugging the entrance in the loop FOR, for example.

• How to download smarthru 4 for samsung series scx4x21 online

  Dear people! I'm not aducated with computers and English. But I learned slowlly by myself. I'm not very good in this still. Can someone tell me. How to download Smarthru 4 program machine series-scanner, printer, fax & printer Samsung SCX4x21. Online. I got it on my PC before, but I erase accedently by mistake from the Panel, then programs and features and then uninstall! I have a CD, in a set with the printing press from the shop. Exactly for Smarthru program I need. But inside CD are too many files that I get lost by myself in the files and I can't do the job ever. Now, I can't use my miltydevice. I more then live a bad life almost in the foriste in a very poor country with mass unemployment and use it to find a job. Can I get help please? I'll really apreciate that. Thank you.

  Hi Greg,.

  Welcome to the Microsoft Community and thanks for posting the question.

  Answering this question that helps us provide a better solution:

  What is the complete model number of the printer that you are using?

  You want the Smarthru software model scx, here is the link where you can download the software.

  http://www.Samsung.com/us/support/owners/product/scx-4500W

  Steps to install Smartthru.

  1. click on the above link.

  2 click the tab notices and download link.

  3. click the software downloads and manual.

  4. at the bottom of this page, you will get the download link to download Smartthru.

  5. click next to Smartthru exe file and install the application and check if that helps.

  In addition, visit this link to install the printer:

  This tutorial is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

   
  Solve printer problems
  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

   

  Hope this information helps. If you have questions about Windows, post the question in the case to the Microsoft Community.

  .

• Buffer problem and cases of ring series

  Hi all

  I had an interesting problem and have a moment that is difficult to find a solution and thought a pair of fresh eyes can help!  I read data during the series using VISA.  That's going well.  I do this continuously and then adding in a string.  This string, I look for new lines and pull them out of the buffer series chain.  I have then look at the lines to see if they have the appropriate orders and, if so, analyze these commands to control a box structure.

  Now, here's the interesting part.  When I started, I wrote a vi to take in an arbitrary multiline string in and analyze data and sentences, and it works as expected, but when I do it with serial data direct and the ring, the case statement buffer does not.  Also, when I probe the parsed string that will control the case statement, it LOOKS right, but the case statement will not accept it.

  Any thoughts would be greatly appreciated, I'm quite confused as to what is happening here.  I have attached the 2 vi.

  Gurus?  Masters?

  Thank you!

  Jim S,.

  I see a few problems.  As previously validated you should use greater or equal? instead of superior?.  The biggest problem is that you have a string constant value '\n', but the constant itself is not configured for '-' code display mode.

• Problem of AMD RADEON hd series 7

  Hi all

  I have problem with my vga card

  first my laptop is "4540 probook s.

  my graphics card is the AMD RADEON HD 7500 m series / 7600 m

  My operating system is windows 7 ultimate 32 bit

  the problem is simply trying to downloal and install the driver of hp here of the site and the site of amd and the same problem

  whenever I got erroe code 43 and the card is not installed as appering in the following photos

  

  

  can someone help to find out where is the problem?

  Hello:

  You should only install this driver that is supposed to install the graphics drivers for the AMD and Intel.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229457&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_105419_1%257CswEnvOID%253D4053%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  The unknown device is probably in need of this driver...

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229457&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_124200_1%257CswEnvOID%253D4053%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  If it's the graphics driver you have used, try to install manually by clicking on the Radeon cards both VGA Standard (one at a time).  Click the driver tab.  Click on set to update driver.  Select travel it my computer for software driver and find the folder of the driver that was created when you ran the file.  This file will be located in C:\SWsetup\sp57199.  Make sure that the include subfolders is selected and see if the pilot goes like this.

  The issue that you are experiencing depending on the capture screen, is the Intel HD graphics driver is not installing.

• Touchpad gestures works do not on Samsung series 5 Ultra

  A few months, I bought my laptop and gestures multitouch touchpad worked just fine (scroll, zoom, etc.), but after one of the windows updates, they no longer work. Someone knows why?

  PS. I am running Windows 7

  Hi Zheel,

  First of all that I would say to go to Windows update history and check the obtained updates recently installed. Read the following article to know how to check it and let us know the number of KB updates.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  I suggest you to update the touchpad drivers and check. Check out the following link to update the drivers.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  I suggest you to download and install the software updates available for the computer. It will install all the drivers updated on the computer. Here is the link for your reference. You'll find it under more downloads in the following link.

  http://www.Samsung.com/UK/support/model/NP540U3C-A01UK-downloads

  You can refer to the section [448891] Smart PC: my touch screen is abnormal behaviour and locks up for a few seconds, what can I do? of the following article for more information on the update of the driver.

  http://www.Samsung.com/UK/support/model/NP540U3C-A02UK-troubleshooting

  Reference:

  The problems with the removal of updates

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-removing-updates

  Let us know the State of the question, so that we can help you.

• No auto restart and error messages on the NVRAM on my laptop Samsung series 7, 1 TB SSD HARD drive hybrid.

  I have a 1 TB SSD disk HARD hybrid in my laptop Samsung 7 series.  From lately the computer stopped automatically restart, I put in each time, and also in my system configurations it I cannot set it to normal startup.  It says something about the NVRAM. During a diagnostic test I got the error message said that if I recently connected a device to the computer unplug it and try again... With all that is that someone knows what could happen?  I have 100 MB EFI partition on my drive, unallocated 7.6 and approximately 931 NTFS... it's just for my hybrid?

  Help, please! :(
  Michelline

  Michelline salvation,

  Because you are unable to access BIOS I suggest you to contact Samsung for help.

• wireless lan driver installation update always fail and the update corrupted my wireless driver I use Samsung series 5

  Updates were recently fired the SW update. I have installed all the other updates the BIOS etc successfully, with the exception of the wireless Lan driver. Instead of doing an update, it has disabled my wireless totally when he said that the installation has failed.

  During my first attempt, I downloaded the driver 100%. Then a pop up message appeared saying that "the installation may take several minutes", and then another Intel logo appears and disappears, but said later that he could not install. After that, I get disconnected from my internet connection. No sign of wireless activity were found. I tried to watch the wireless icon and it was gone. I tried to solve the problem and it says that the only device for my wireless connection is Bluetooth.

  I thought it was just the problem of internet connectivity, so I tried to download the next day, but this time while being connected to a local network. The same thing happened to downloaded 100% and does not once again during installation. I just want you to know that I closed all applications and my laptop plugged in during installation if it helps your troubleshooting. I asked SAMSUNG support and they told me that the problem is with Microsoft, so I should ask them.

  I tried to update for like 5 or more times, but it's the same thing. I use my laptop for work and it's like I can't live without my wireless LAN are not always available. Download of the update becomes tedious because I have to wait like half an hour to finish the download only to find out that the installation will fail. I searched his driver I can install it manually but its nowhere to be found, looks like I'm stuck with SW update

  Hi Saloni,

  Thanks for posting your query on the Microsoft Community.

  Here in this scenario, I suggest you try to re - install the latest driver for network/wireless connection on your computer and check if it helps.

  Step 1:

  Download the driver for the network adapter / wireless computer/hardware. Visit the Web site below.

  http://www.Samsung.com/AE/support/model/NP500P4C-S08AE

  Step 2:

  Uninstall the driver for Wireless LAN / network card.

  Follow the steps to uninstall the network adapter driver:

  a. press Windows + X keys, and then click Device Manager.

  b. search for network card.

  c. right-click the WLAN network adapter , and then click Uninstall.

  d. follow the command prompt, and then restart the computer.

  Step 3:

  Install the network card driver / wireless that you downloaded from the website of the manufacturer of the computer/hardware.

  Please reply with the status of the issue so that we can better help you.

• problem with the variation of size control: pen pressure

  Hello. I have a problem when I put my brush to put on line art form, size and dynamic variation of the pen pressure. but nothing need help.

  Sometimes not much, when I have to be more specific. but you will pass one that I get really brush pressure control and the line remains the same