Problem of storage.

Similar Questions

• Hello. I so want to know if there is a way to keep the photos on icloud and get them deleted on your iphone, so that there is no problem of storage of the device

  Hello. I so want to know if there is a way to keep the photos on icloud and get them deleted on your iphone, so that there is no problem of storage of the device.

  iCloud is a synchronization system, not an external 'hard drive '. If you remove them on your device, they will remove icloud. To increase the available space, go settings/iCloud/Photos and select optimize iPhone/iPad storage. That will reduce the space required by 90% when it is fully effective.

• problem with storage space - iPhone 4 - 32 GB

  Hello, I have an iphone 4 32 gb. I'm having a problem with storage space. A few days ago, that even though I was taking 5 GB of empty space, a notification appeared that storage is almost full. I deleted about 2 GB of photos and videos. He showed me 2 GB of free space, but after 1 hour again the same notification appeared. As soon as I have emptied my space with about 1 to 2 GB by deleting photos or videos, it is completed with other data.

  How should I solve this problem?

  Thank you.

  What is the exact wording of the message? Could he be referring to iCloud storage?

  Also have you withdrawn your recently delete pictures and videos? Deleted ones is 'saved' for 30 days or more unless you intentionally delete/remove

  Why my iOS device I have more pictures that I can find?

• There is a problem of storage with the data path [path to hard] store

  I have two sites connected by using a VPN connection over a WAN link. In each site, I have an esxi with several VMS host and operation of replication device of vSphere (v 5.1.1.0 Build 1079383) in each site. In each site, these is also a vCenter server with the device of RVS registered and logged with the other site. All the virtual machines are configured to replicate to the other site.

  In my initial configuration of the RV (first install) site remote had 2 vNIC used for the management and I figured it was my problem with replication (see kb2040302). So I have changed since my host configuration from the remote site to have that single vnic management (does not solve the problem). I then registered, removed and reinstalled the VR device without change to the problem.

  What is going on:

  1. I am able to configure replication between sites without a problem.

  2. first replication occurs between sites and reports a success.

  3. the remote VM replication to the main site continue to work properly and all is well for the days and continue to work.

  4. the main site of VM replication to the remote site fails on the second and all attempts to reproduce the error. There is a problem of storage with datastore path '[datastorename] '.

  

  I followed the advice of kb2040302 better as I can. But I must confess that I could use some of the more detailed instructions on how and what site should I check the logs. and how to check my configuration management vnic.

  I'm looking for someone provide additional troubleshooting steps with good detail.

  Thank you

  
  

  Resolution:

  The problem was caused by a security setting on the NFS Server data store. VRA could not delete the (hard).

  Specifically, my problem was with authorizations on the Synology NAS under the application of the "file Station.

• External partition problem 'shared storage' AT105

  I'm not entirely sure what the problem is exactly, but I can only download and install programs videos on the partition of storage shared my tablet. I have about 2 GB of free space on my internal storage, 3 GB free on my SD card and yet I am limited to the 200 MB of free space f 'shared storage' in settings/applications.
  I already tried to switch to Tablet option on all applications, but it shows only 200 MB of total free space of 2.5 GB of shared storage.

  My question is, how can I get rid of this partition or how can I download on my memory internal or SD card. No matter what I do, everything I download or install is sent to the shared storage. I have a ton of free space that I can not access.

  Help, please.
  Running OS 4

  Hello

  Android apps would be installed on internal flash of my knowledge.
  You can use some applications like app2SD to move the only app to SD card.
  But not all the apps that support.

  In addition, the SD card must be formatted in exFAT to write to the SD card

• Problem of storage space

  Hello

  I have a problem in my mac storage space... In 'about this mac' box it says I have 70 GB of movies, which is totally false!

  I checked many times and searched using formats, such as '.mp4, etc "for any film that might be on the system... There is NO.

  There are no movies on my mac because I keep all switch to an external hard drive.

  I do not understand whence this 70 GB, any help please?

  PS: I have something suspicious... I dropped over 70 GB of movies via iTunes 'OPlayer HD' App on my iPad

  Maybe this related question? The problem is that my iPad backup ' size is just 400 MB :/

  Thank you all!

  When you delete things in iTunes it moves to the basket, then you will need to empty the Recycle Bin to reclaim your space.

  In Spotlight search results preferences are selected as a criterion of movie search

  Or

  Try re-indexing of Spotlight.

  Go to System Preferences > Projectors > privacy

  Click on the button Add your HD quit System preferences.

  Restart System preferences, remove HD from the list of privacy.

  Spotlight should start indexing, give it time.

  You can download Omnisweeper here, https://www.omnigroup.com/more

  It gives you a breakdown of what's on your mac and the space it occupies.

• Major problem of storage

  I'm having a lot of problems with my Motorola Devour of automatic storage choice. My 8 GB SD storage card is in the appropriate, mounted housing. I can take it apart very well and I got on the phone and SD card two formatted after 1.5 months in the 3 months I've owned it. The image below is not my phone, my information, it's just to help me explain my problem, as I'm obviously not an expert of that sort of thing. A.) my Total of SD card space is 7.42 GB (must be eight, so I don't know why it's not eight). (B) my available space in my SD card is 6.33 GB. (C.) * in my internal memory of the phone, my space is 3,30 MB. All the information is saved in the phone memory and I don't know how I can move it to the contrary store on SD of my.

  My Devour constantly has a "Low on space" warning at the top of the screen, and I try to send a text message, the caveat will blip on the screen and send back to the main page of messages. (The main page of messages shows my email, facebook, text and universal mailbox.) Please help, as the local Verizon stores can do no such thing. (Beats Me as to why)

  Thank you

  I realized that the Apps can be stored on the SD card. My photos and music automatically saves to the SD card. Currently, I reduce my amount of applications. Are there more space internal memory in phones better than mine?

• Problems of storage controller AMD with a 3 TB HARD drive

  I recently bought a 3to HDD Seagate to use as remote storage / secondary. It seems that AMD has not updated its storage controller to recognize > 2 TB yet. I can't find drivers for my chipset anywhere at least. And it seems that nobody running them an AMD chipset is upgrading the HARD drive past 2 TB? I know that Intel has released an update for their controller that corrects this problem. Everything is available for the AMD controller like that?

  HP Pavilion HPE H8-1214

  MS Windows 7 Home Premium 64 - bit SP1

  Processor core AMD FX-6100 6

  10 gig Ram

  Gigabyte 2AC8 Mothermoard

  AMD Radeon HD series 7700 Gfx

  1465 GB Seagate ST1500DL003 - 9VT1 SCSI Disk Device (RAID) primary (installed HP)
  2930 GB Seagate ST3000DM001 - 1CH1 SCSI Disk Device (RAID) secondary (the problem drive)

  Gigabyte has no mention of this existing motherboard on their support site.

  AMD has nothing about their storage on them controllers.

  I can see all 3 TB in disk management, but I can't partition beyond 2.2 to. The last 746,52 Go will be unusable.

  AMD AHCI compatible RAID Controller driver version 3.3.1545.14 and Microsoft says it's the most up-to-date

  Any help with this would be great. Thank you!

  Hello:

  Here is the link to the latest AMD SATA RAID drivers.  Second file on the list.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  That's all the help I can offer because I do not know why all the 3 TB of the drive is not visible in a big partiton unless you don't format it to GPT.

  So that all 3 TB be seen in a single partition, the drive must be in the GPT format.

  Here is a white paper from HP on TPG from a PC business...

  http://h20565.www2.hp.com/portal/site/hpsc/template.BINARYPORTLET/public/kb/docDisplay/resource.process/?spf_p.tpst=kbDocDisplay_ws_BI&spf_p.rid_kbDocDisplay=docDisplayResURL&javax.portlet.begCacheTok=com.vignette.cachetoken&spf_p.rst_kbDocDisplay=wsrp-resourceState%3DdocId%253Demr_na-c02826744-1%257CdocLocale%253Den_US&javax.portlet.endCacheTok=com.vignette.cachetoken

• Acer Liquid E2 Duo: Problem of storage. How?

  Hello

  I have a storage problem on my Acer Liquid E2 Duo. Because of my previous phone experience that I thought 4 GB internal memory was enough, but it's not good I moved all the applications that I could to the SD card.

  Here's what I see in 'Settings'-> 'storage '.

  1. Storage internal-> size-> free 50 MB 2.35 GB
  2. -> Card SD size 32 GB-> GB of free 22
  3. Storage-> phone size 1.6 GB-> GB 1.6 free

  If "Internal storage" + 'Phone storage' are by default 4 GB to come with the phone.
  But obviously NO application go to the "storage of phone" so I run out of space in "internal memory". Why?

  In addition many to come with the OS ' default ' apps (and that I do NOT like Facebook, etc...) are not INSTALLABLE (I tried it only turn them off) and no MOBILE SD card (option is grayed out).

  So in summary: I have run out of space in "Internal memory" with many not removable applications and while the 'storage phone' is not used, I have plenty of space on the SD card but I can not move the default applications default on that...

  If anyone has the answers...
  THX
  T.

  Hi all, for some time now, I've provided workaround for this "storage solution" issued by PM and Acer have been generous enough to allow me to do.

  However, things got a lot better now and I am extremely grateful to Acer that will allow me to send a link to workaround and make it a sticky so that nobody has to PM me longer for it.

  Acer will add their own words at this, but let me say that although the 'process/script"is very well written (ahem!), it is not for novices and you will need to understand some parts of your phone, along the TSF, some may be new terminology and jargon.

  And of course, it is at your own risk. You decide for yourself the positive feedback in this thread about whether it is worth to continue. That being said, here is the link to my instructions as to how you can repartition the storage:

  Link to instructions contained in a zip file with two files

  Once again, thanks to Acer to enable this.

• Problems of storage USb Wireless WRT610N

  
  

  I found a solution, but not as you have advised.

  It became clear that external hard drives with installed on them to backup utilities do not work with your router - something you don't have to stress not only when I bought it, but in all the documents that I read.

  Re-formatting my hard drive in FAT32, thus eliminating the backup software has solved my problem. Even if you specify the System NTFS is supported it seemed FAT32 is the most reasonable route for compatibility. Disk utility tools can enable users to create FAT32 partitions more than 32 GB, but people should be aware that you cannot store files larger than 4 GB on FAT32 (for example a blu - ray movie).

  I hope you guys at Linksys take the right steps and expose very clearly to future customers as your USB storage solution does not work with readers who have backup software and save this software you must remove everything first. I think it would be a good idea just to generally include in your documentation that this is the best people use a car clean and empty.

  Thank you. Also, I hope that someone else who has this problem will be able to find it.

• Problem of storage Application Smartphones blackBerry (Curve 9380)

  Guys am very frustrated about this problem...

  all applications that I download are downloaded into the memory of the phone due to which my laptop starts slowing down due to lack of memory.

  Please guys tell me how I can move my apps on memory (8 GB) card rather than saving on the phone memory.

  thnk you

  Hello and welcome to the community!

  The quick answer is that you can not... apps can reside in the AppMemory space, and the amount of AppMemory in each device is attached during the manufacturing process and can never set.

  The long answer is...

  There are three types of potential memory on a BB: 1) application memory, the device memory) 2 and 3) Media/SD Card Memory.

  Application memory - it is the most important; It is protected (not available to the user), dedicated and (fixed size) space as the destination for the installation of applications (more a few storage applications, overhead and other costs). You can't touch AppMemory. You cannot improve the maximum AppMemory that your BB has. It is what it is. Applications can install only here... There is no other choice.

  The device memory - it is space on your BB you can touch these files, images, media, etc. In general, it is not very big, but it is available.

  Memory card SD/Media- is what it says... your SD card to store files, media, photos, etc.. It can be as large as your BB OS can support... see this KB:

  • KB05461 Sizes of card MicroSD taken in charge by the BlackBerry device software

  On some devices/OS levels, you can see 'Free file' (Options > status), I think this is equivalent to AppMemory. You can see on other devices, all the memory usage levels three (Options > memory). Here are some tips to use:

  • KB02843 What is the function of low memory manager on the BlackBerry smartphone
  • KB14320 How to maximize space and power battery life on the BlackBerry smartphone
  • KB14213 Call logs, SMS text and email messages are deleted from the BlackBerry smartphone

  Finally, it is always important to correctly close applications when you are finished with them. Using the back or on the red button won't do that - those leave the app to decide what to do... and some let themselves memory-resident, consumes resources on your BB, slowing down the overall performance. On the contrary, to close an application, tap on and select 'Close' or 'Quit'... which force the application to be closed, freeing resources for your new use it consumed. Some applications will always be running (in general - BBMessenger, browser, homescreen, phone and Messages)... but, you should always close them properly - especially the browser... If we leave on a web page, it will not consume only additional resources, but the power of the battery as well.

  In addition, each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy. Some have taken to do this on a regular basis as a preventive measure... some as often as once a day. Others got the app QuickPull to automate a simulated Batt Pull.

  Good luck!

• Can someone help with the problems of storage for photoshop cc

  Hello

  Ive recently bought a new mac and have downloaded photoshop top. When I open the program and work on A2 size pages for my portfolio my storage used on my mac goes 92 GB free for only 12-8 GB free, what I read photoshop uses temporary when editing files (I don't know if that's okay) and so use temporary RAM.

  Is there anyway to stop that I sometimes get a message saying my storage scratch is full and I can do is no longer any work, please could someone with more experience let me know if there is a way to solve this problem, or if I simply have to share my new laptop for one that allows me to have more storage RAM.

  Thank you!

  In the screenshot below I've implemented an A2 document for printing.

  The size of the file is 99.6 MB, and the pixel dimensions are 4961 x 7016, which should work without problem.

  If you have several layers the file size, but it must always be easy to manage.

  

• VMware Vsphere HA (problem of storage in common) and problem of band network bandwidth

  Hi all

  I am setting up VMware VSphere HA on ESXI 6.0

  I have 5 hosts running, each host has 2 management networks main network 1 vMotion and 1 network card for balancing with the management network. (each NIC 1Gbit uplink)

  I also attached to each card a FC (Fiber Channel) connected to HP 3PAR storage.

  each host have 1 TB or 2 TB Fiber Channel-attached storage.

  When I was setting up the AP he stated that he did not have any shared how storage can I allow other hosts to see each store data as a shared storage. NB: when I go vsphere client to web I see all the storage of each host.

  I also want to allow FT on a virtual machine, I have also a problem of bandwidth insuffisent or something. .

  also, I enabled fault tolerance on each NIC attached to the host.

  also another question: should I export volumes (LUNS) to all hosts in the AP? (in fact I exported each volume to each host separately) for example:

  Volume 1: HP3PAR_ESX1 exported to HOST ESX1

  Volume 2: HP3PAR_ESX2 exported to the ESX2 HOST

  Volume 3: HP3PAR_ESX3 exported to ESX3 HOST

  .. .etc

  can you me clear on this issue or guide me to where I can solve these problems please.

  When I try to activate the FT on the VM I the following warning attached

  This message was edited by: coolirc attached image FT problem

  There are memory FT requirements compatible VM is through two virtual, primary and secondary computers. so it will consume the same amount of resources of both ESXi hosts.

  VM with 10 GB of RAM allocation, turn on FT booking VM is now 10 GB RAM, so 10 GB + VMkernel consumption General host running primary VM and same amount of the host that is running with secondary VM. on top of this admission control in support of the failures of host we are going to tolerate so say primary VM host fails, then secondary VM becomes the new primary and triggers a new high school to be created and powered in one of the other host survivor in your HA cluster but which will be successful only when you have sufficient resources available to satisfy a reservation.

  your source host has 16 GB of RAM and one of the destination host also got 16 GB of RAM, so if you try to activate pi after disabling admission control on your cluster policy, I think that it should allow you to activate FT without errors. [if it still does not work so if possible, turn off all other virtual machines for free resources or to try to reduce their reservation manually if they are running with a reservation and try again.]

  with admission control, the necessary resources would be even higher.

  screenshot of Cluster summary reports that you have 4 guests in it and the memory resources available about 30 GB to 60 GB total memory. But isn't always the right figure, if you go to the monitor-> book resources, is where you will find actual "ready reserve", it's the right amount of reserve memory that you will be able to use across several virtual machines, you run in your cluster.

  I tried 2 vCPU vm FT in vSphere 6, works very well, but never tried with Hardware version 8, in your case, your virtual machine is hardware version 8, although I'm not sure if it is mandatory to have the hardware version 11 VM for FT so ideally it should work, but virtual hardware version if possible vm upgraded to 11.

• problem of storage capacity reports

  Hello, in our environment we leave intentionally a free space of 20% on all data stores to avoid any problems.

  All virtual machines are thick and provided, but these 20% intentional overhead is causing our storage reports "remaining time" be inaccurate and swollen compared to our company policy of data store.  What can I do to exclude 20% storage shared all the reports and see what is our real time remaining?

  Have you tried setting up a strategy (as your default strategy).

  Click on "Configuration" in the top right, click on 'Default policy' (or the policy you are using right now). Go to 3A - check "remaining capacity is based on:" to the 'useful capacity' and then go to 3B, activate '% of disk space for reserve as buffer capacity' and set it to 20%. This should affect your remaining time... Check the provided screenshots. Let us know how it goes.

  

  

• Problema special-storage server

  Buongiorno a tutti,

  probabilmente sono 'off-topic'... my lo stesso chiedo is qualcuno ha di idea may come lo storage HP p2000 G3 SAS per ogni cavo SAS is al Server HP Proliant DL380 G6 mid show due host uno instead?

  The e the following tracks:

  -dual storage controller 1 HP p 2000

  HP Proliant DL380 G6 Server-2

  It tutto e cavi SAS mediante is: each server ogni ho due cavi SAS che vanno a finire su both I have storage dello controller. He problema che lo storage invece di vedere 2 host don't vede 4.

  No e prima volta che faccio questo tipo di colegamento, my e prima volta che lo storage mi vede a doppio I nodi!

  COSA may sara successo?

  Grazie thousand by the collaborazione

  Andrea

  Ciao,.

  Ho misconfigured anch'io some P2000 e SAS it Liveleak.com che denoti e corretto.

  Più che dovresti vedere 4 host 4 HBA.

  A level is di lun masking, which assegnare lun alle VMware Server HBA dei 4 2.

  The host of lato, visto che hai 2 HBA dovresti vedere doppie, in this case lun, MPIO di VMware, ti mascherera lun, facendotene vedere una sola.

  Spero di stato chiaro esser.

  Ciao

• Problem of storage on my Macbook

  Storage indicates I have 77 GB of applications on my macbook, but I don't actually have that many applications. How to remove some storage?

  If your source for this information is the 'about this Mac' view, be aware that there is a bug in the program that the product and the information contained in this display cannot be relied upon for accuracy.  A few times a reindex spotlight will correct:

  https://support.Apple.com/en-us/HT201716

  Have accurate information, download OmniDiskSweeper and Grand Perspective (both free) Internet and open them. They will show all your files and respective sizes.

  https://www.OmniGroup.com/more

  http://grandperspectiv.sourceforge.NET/

  Ciao.