Problem of Vista security
Vista security blocks all downloads
You should see a yellow bar at the top of the screen. Click on it and select 'download file '.
Tags: Windows
Similar Questions
-
Whenever I have download and install the vista security updates I lose Mozilla Firefox. The program and the icon still exist but do not respond. By clicking on the icon or clicking on the program files does produce absolutely no response.
So any time I install updates, I have to run internet explore and firefox redownload. Most annoying. Help.
P.S. Yes, firefox is my default browser.Some problems occurs when your Internet security program has been implemented.
trust the previous version of Firefox, but not more acknowledges your
update as being approved. Now how do I solve the problem: to allow
Firefox to connect to the Internet- Make sure your Internet security software is up-to-date (for example, you are using the latest version).
- Delete Firefox to list your program of programs approved or recognized. For detailed instructions, see
Configure the firewall so that Firefox can access the Internet. {web link}
-
Failures of Windows Vista Security KB970710, KB982665 and KB9552709
If the updates of Windows Vista Security above could not install, should I worry about this, I need to find a way to correct the failures and then installed correctly, please advise. Thank you
Yes, you need to solve the problem and install them in particular because they are updated for security.
Try to download and install manually by download on your desktop and install them one by one. Insert the number of KB to get updates on the right and choose the one corresponding to your version of Vista: http://www.microsoft.com/downloads/en/default.aspx.
If this does not work, try a boot minimum http://support.microsoft.com/kb/929135. Disable your security software. Then try the updates again. Once this is done (if it worked) don't forget to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.
If this does not help, please transfer your question in Forum Windows Update:http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where updates experts will be happy to help you. Please post with the information requested here:what to post in the Windows Update forum
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Update of security (KB2378111, 12.0 MB, published 12/10/10) for Win Vista failed with the error 800b0100. Failure of several attempts, power, played external parser M.S., downloaded System Update Readiness Tool, saved the file on the desktop to install proxy server disabled by bike. Nothing has worked.
Start a help tickethttp://support.microsoft.com/common/international.aspx?rdpath=1&gprid=9860>
See the section "How to get help" of http://support.microsoft.com/kb/2378111
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
Or you can...
Start a free Windows Update support incident email request:https://support.microsoft.com/oas/default.aspx?gprid=6527
Buying to meet problems installing Microsoft security updates also can visit the following page for assistance:https://consumersecuritysupport.microsoft.com/
OPTION has:
1. open IE 32-bit (only) to https://consumersecuritysupport.microsoft.com/
2. click on security updates aren't installed properly
3. on the resulting page, click CONTINUE
4. Select an appropriate country and language, and then click CONTINUE
5. click on the option support by PHONE or email.
OPTION B:
Start an email from Windows Update support incident request for free
For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx
-
Updates to Vista security for the 13/04/2010 caused the crash
Vista security for 13/04/2010 updates crashed my computer. After days to isolate the problem, restore from before 04/13 and back out updates, I wonder what to do next. If I defragment to clean up after the mess, it installs the bad updates again. If I put it back to automatically download it install bad updates. I have my computer still works but for how long?
Hello. Sorry that it took me so long to get back but my PC crashed pretty hard and I had it slick and start over. For some reason I couldn't not also get logged back here and had to create a new code.
In any case, after you have installed correctly KB978601 he continues to black screen, then mode without failure. I tried a number of different things and finally it would not go voluntarily to Safe Mode and I had to encourage him a little with F8. Didn't know what to do after many, many hours of work, then I wiped with automatic and started data backup on the other.
It seems that everyone had updates 04/13, including Microsoft, Adobe and NVIDIA. There was a problem between the updates and my graphics driver, NVIDIA GeForce 7600 GS. Even when I supported on the graphics driver for several versions it would be me kick out to Safe Mode or restore the system. Each time windows said I needed to update my graphics driver.
I reinstalled everything and still had some problems, until I defragmented several times. It seems to work OK now.
-
Vista security updates cause IE does not connect to internet
x 2 last month, when I ran the Vista security updates, I have been unable to get to all the websites with IE8. I have a connection to the internet, but IE will not connect to all websites.
This is a laptop and I am currently wireless, however I had the first problem with updates when wired, then, happens to be it. I have to go and uninstall updates of security one at a time until I have found the culprit. This time it was KB974571, the last time it was KB972260. I disabled updates now because I'm tired of this.
I am completely disgusted with Vista. MS should provide XP for anyone wishing to revisit it, for free. I'd be at the front of the line
If somebody can tellme why security updates would cause this problem, I would appreciate it.
Thank you
Hello
Other methods should also resolve the problem if needed.
Your product code must be on the CD/DVD provided with the device or back/under the computer.
If this isn't the case, they will find it for you. These are not cracks - they find your product key on your machine.
Vista product key
http://www.Vistax64.com/tutorials/85023-product-key-number.htmlMagic Jellybean Product Key Finder see Web site for many products.
http://magicaljellybean.com/KeyFinder/Finder Windows product keys
http://www.rjlsoftware.com/software/utility/winproductkey/Window Vista and product keys Microsoft Office - WinGuggle
http://unlockforus.blogspot.com/2008/01/WinGuggle-get-your-Windows-Vista.htmlHow to see the Vista product key
http://www.Vistax64.com/tutorials/85023-product-key-number.htmlI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Computer is not download the 'important' for vista security updates
Hello!
I have problems with the download of the microsoft/windows updates current. My computer is set to automatically download, but there was a series of 10 "major updates" that I've been prompted to manually download. However, I get a notice that my computer could not download 5 of these 'important' for vista security updates. Important security downloads carry reference numbers: KB956744 KB971557 and KB971657, KB973507, KB973540. Are the other three updates that will not download "update for Windows Vista for x 64-based systems (KB968389)" and "update for the filter of junk mail from Windows Mail for x 64 systems (KB905866).»
Can someone help me understand how my computer download these updates?
Thank you
Hi Brian, confuse
A good step to start with the recommendation provided by Jos Raymond. In addition to this, you can try to clean boot.
We would like to get a better understanding of this issue, so we can better help not only you but other users with similar problems.
What version of the operating system you are using (Windows Vista or XP)?
Please let us know if you see errors or the Windows Update window error codes.
Has nothing changed on your system just before that this problem has occurred - all new hardware devices installed? New software or updates installed?
If you can give us these answers we can help diagnose this problem.
Meanwhile, I have a few basic steps that you can follow first, we can try to put the computer in a clean boot state and then try to install the updates:
To do a clean boot, follow the steps below:
- Log the computer by using an account with administrator rights.
2. click on Start, type msconfig.exe in the Start Search box and press ENTER to start the System Configuration Utility.If you are prompted for an administrator password or for confirmation, type your password or click continue.
3. on the general tab, click Selective startup, and then clear the Load Startup items check box. (The box use the Boot file is not available.)
4. on the Services tab, select the hide all Microsoft services check box, and then click disable all.
Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
5. click OKand then click restart.
Once the computer restarts, try to install the updates. If you are not able to install, please check for error messages or error codes.
To restart the computer to a normal startup, follow these steps:
- Click on start to reduce this includes this image, type msconfig.exe in the Start Search box and press ENTER. Reduce this includes this imaIf that you are prompted for an administrator password or for confirmation, type your password or click continue.
2. on the general tab, click the Normal startup option, and then click OK.
3. When you are prompted to restart the computer, click restart.
I hope this information is useful.
Please let us know if you need further assistance.
Concerning
Rehman - Microsoft Support
-
Windows Vista security update 979687 has failed since February 17, 2012 today is April 3, 2012. What can I do?
Hello
1. did you of recent changes to the system before the show?
2 is the issue limited to the specific update?
3. you try to install the update manually or through Windows updates?
4. do you get an error message when you try to install the update?
5. are you able to install some other updates?
Method 1:
Follow the link below, install the update in clean boot mode and check if it helps.
http://support.Microsoft.com/kb/929135
Note: Once you are done with the boot, follow step 7 in the link to your computer in normal mode.
Method 2:
Follow the link below, download and install the update, check to see if it helps.
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24159
Method 3:
Follow the link below, run the fix it tool and check if you can install the update.
The problem with Microsoft Windows Update is not working
http://support.Microsoft.com/mats/windows_update/
Also see the mentioned link below for more information.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
Let us know if it helps.
-
Error code 2-24 while installing the Windows Vista Security Update KB2494113
Original title: Windows Vista security KB2494113 update
Have tried several times to install Windows Vista Security Update KB2494113. I get an error code 2 24.
Hello
Please follow the steps below.
Method 1:
Step 1:
Put the computer to boot and then try to download and install the update manually from the Microsoft Download Center.
Click on the link below.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
NOTE: after installing the update successfully, please return the computer to start as usual (see step 7 link mentioned above)
Step 2: Manually install the update starting from Microsoft Download Center.
a. go to the Microsoft Download site, type the number of "KB" of the update in the search box and then click press ENTER.
b. in the list of search results, click on the (KB) Knowledge Base article link to go to the download page. If there is more than one list, look for a link that goes to the Microsoft Download Center.
c. If there are several versions on the download page, find the appropriate for your computer. Click on the download button, and then save the update to your desktop.
d. When you are prompted, click open to install the update.
Click on the link below.
Microsoft Download Center
http://www.Microsoft.com/download/en/default.aspx
Method 2:
Follow the steps from the link below.
Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Back up the registry
Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
-
Repeated failure to update Windows Vista Security KB2665364
Update for Windows Vista security for systems x 64 (KB2665364) failed repeatedly(while all my other automatic updates succeeded).The error code is 80070490 (Windows Update encountered an unknown error).I tried the two system update tool and recommended Microsoft Fixit such downloading.but neither resolve the situation.I couldn't follow the "clean boot" option (it went over my head very quickly).When I bought my laptop, it came with Windows Vista Home Premium (64 bit) preinstalled.I have a product identification number, but not DVD. Is there a way to repair Windows without the DVD?Or...?Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
-
virus/malware removal of Vista security 2012
Hello, sorry I upset you date January 31, not very good is not. It's the fake MS Vista security 2012 malware virus. In fact, they hitted me 6 months ago 3 months ago there are one and a half months. Last 3 times I was deleted with success in safemode with network mode, find my access to the internet, and then used a free software called malwarebytes AND went ahead for a restoration of the system. * This time I can't. Restoring the system returned a pop-up says: System Restore has failed. Computer system files and settings yr did not change. Details: the restore point was damaged or removed during the restoration. I tried 3 times, still getting the same answer. Mean I can not turn the defender of the window and firwall turn it back on. I tried the Microsoft safety scanner, showed 1 viruses, deleted, but no use. I tried Microsoft security essential, problem got worse! In addition, they * the shortcut on my desktop, some people work while others do not, takes me for a location or a different software. Help, please! Here is my laptop spec: Vista Ultimate, 32 bit. RAM 4 GB, Hard drive about 350 GB I / E browser 8.0 and firefox. Thank you
Hello
Have a pack of service higher than on the DVD is discussed in the links provided.
If you have a DVD of Vista without SP then you will need to uninstall SP1 to use that
disc and later re - install SP1. If you have installed SP1 SP2 disc, then you
you will need to uninstall SP2 to use the disc and later re - install SP2.Check with the support of Sony. You might be better off backing up the data of the
computer and then return the system back to factory specifications. Of course I
Deletes all programs and data. Also ask for suggestions on the Sony Forums.Sony - Contacts
http://eSupport.Sony.com/us/Perl/contact-land.plSony - drivers
http://eSupport.Sony.com/Perl/select-System.plSony - Support
http://eSupport.Sony.com/Sony - Forum
https://Forum.sel.Sony.com/?XID=M:Showcase:eSupportI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Somehow my daughter and me were watching you tube videos yesterday. today I went on my computer and was hacked by some viruses to windows vista security 2012. the virus is coming as a Trojan - BNK. Win32.key logger.gen. I tried to restart the system in safe mode and use system restore. The blocked virus, I tried to find the virus, no chance he hid. That I tried to download bigfix that worked before. all that I'm trying to work the horse of Trojan malware blocks and said infected with this Trojan BNK. Win32. under the window buy Vista security 2012. What can I do my Mc McAfee Security has expired? Curtis
Hello
If McAfee is expired then you must uninstall it and run the McAfee removal tool to avoid problems of
remains of the original. There are recommendations of the antivirus configurations for free below.McAfee - removal tool
http://service.McAfee.com/FAQDocument.aspx?ID=TS100507------------------------------
Here's what I use and recommend: (these are all free and very effective versions.)
Avast and Prevx proved extremely reliable and compatible with all I have
launched on them. Microsoft Security Essentials and Prevx have also proven to be very
reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.Avast Home free - stop any shields is not necessary except leave the file system, Web,.
Operational network (Script and behavior are also recommended in Ver 6 +).Prevx - Home - free
Windows Firewall
Windows Defender (is not necessary if you use MSE)
Protected IE - mode
IE 8 - SmartScreen filter WE (IE 7 phishing filter)
I also IE always start with asset if filter InPrivate IE 8.
(It may temporarily turn off with the little icon to the left of the + bottom
right of IE)Two versions of Avast are available 6.x and 4.8 x
Avast - home - free - 6.x stop shields you do not use (except files, Web, network, &)
Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
disabled - click OK
http://www.avast.com/free-antivirus-downloadAvast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
Finish those you don't use).
http://www.avast.com/free-antivirus-download#TAB4Or use Microsoft Security Essentials - free
http://www.Microsoft.com/Security_Essentials/Prevx works well alongside MSE or Avast
Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp?prevx=Y<-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspAlso get Malwarebytes - free - use as scanner only. If you ever think malware and that
would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
(not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
never find anything of note that I started to use this configuration.
http://www.Malwarebytes.org/products/malwarebytes_freeI hope this helps and happy holidays!
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Vista Security Center alert (red shield) errors indicating security software (firewall, malicious software) does not not to start?
This problem has resurfaced. July 2011.
2011 Microsoft Security Center alerts & errors?
What The Red Shield keeps popping up with two questions in the Windows Security Center;
(1) firewall does not run.
(2) anit-virus Malware software is not running.
Usually after a while it will reset and run, or I would go on the page of the security configuration to start a program.
However, recently, the settings will not be reset, and it became an ongoing problem. He seems to have understood
worse with Windows updates.
He had a command back to review and reset the settings of windows Security Center in a solution under Windows
but I wasn't able to find it again (the help has been restructured)
I ran sfc/scannow, Glary Utilities, CCleaner and Advanced System Care.
AntiVirus software are Microsoft Defender, F-Secure, Malawarebyes.
I run Microsoft WindowsVista.
Any help would be appreciated.
Sincerely the rich;
Hi rich,
You may need to install the hotfix that is described in the following article and see if it helps:
Hope this information is useful.
-
How to remove vista security 2011
I turn on my computer and he was going up to ok this vista security 2011 came then I tried to go in internet explore, but as I tried this vista stopped me he just kept popping up and would not let me do any what I got now lights up as a guest on my PC user, I was wondering if anyone else has had this problem and if there is something I could do to sort it?
Hello
which is malware that goes under a variety of names
Follow the exact steps in the link below to remove it
Windows XP rogue nameName of Rogue Windows VistaWindows 7 Rogue nameXP Antispyware Vista Antispyware Win 7 Antispyware XP Antispyware 2011 Vista Antispyware 2011 Win 7 Antispyware 2011 XP security Vista security Win 7 Security XP security 2011 Vista Security 2011 Win 7 Security 2011 XP Internet Security Vista Internet Security Win 7 Internet Security XP Internet Security 2011 Vista Internet Security 2011 Win 7 Internet Security 2011 XP Antimalware Vista Antimalware Win 7 Antimalware XP Antimalware 2011 Vista Antimalware 2011 Win 7 Antimalware 2011 Keep XP Vista guard Custody of Win 7 http://www.bleepingcomputer.com/virus-removal/remove-win-7-AntiSpyware-2011
-
I used a program to blow this stupid fake virus Vista Security that's happened here. Subsequently, I can't open any .exe files. If I open a file saved in this format (for example, a Microsoft Word file recorded) will be open, but not all of the original programs themselves. I can't do a system restore because it's a .exe. The DOS commands, including the .com-style those don't work either! Help please!
Hello
Method 1:
I suggest you follow the steps in the article below and check if it helps.
When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program
http://support.Microsoft.com/kb/950505/
Method 2:
If the problem persists, you can try the upgrade on the spot and check if it helps:
How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
http://support.Microsoft.com/kb/2255099
Note: Make sure that you back up all data before you perform the upgrade on the spot.
Maybe you are looking for
-
All my addon options disappeared from my Tools menu. Help menu item does more either.
Thus, at random, all the options of the addon under the menu bar tools just disappeared on me. I was not yet close FF, it was just instantaneous. A sec I clicked on tools to do something, everything was fine. Then 2 minutes later I clicked on tools a
-
HP J 6400 working with Windows 8
How can I get my HP J6400 to work with Windows 8?
-
BlackBerry Smartphone 8330 messaging problem
I have configured my 3 email (google, yahoo, msn) accounts when I bought my phone. Without thinking, I changed all 3 passwords for email accounts on my PC and I stopped getting emails completely. For a while, I was able to still send emails from my a
-
Cisco SG 300-20 switch connects to the router
Hello I try to install my new switch Cisco SG300-20 in my local network, but I'm not succeed. The SG 300-20 fails to connect to my router. When the router is directly connected to the SG 300-20 I fails to obtain the DHCP configuration. Any port I try
-
Remove frequent list in windows 8
Someone can help me. I love windows 8... but one thing I don't like is the frequent bar keeps coming back when you use internet explore. For the complete beginner, how can you get rid of the bar for good? Thanks M