Problem of Windows 7 mode and Virtual PC XP

Similar Questions

• Don't port look for a printer in windows xp mode and virtual PC

  Have an older Calcomp plotter.  Used with Win xp.  The drivers are not compatible with windows 7 (64).  Upgrade to Win 7 Professional, downloaded xp mode and virtual PC.  All right.  Installed my plotter in xp Mode, but can't seem to find the plotter to printer usb port is connected to.  Knowledge tracer works because as I tried different ports, the test print on my HP printer that is set up a home network.  Reading the different instructions, but they are above my head.   Have HP touchsmart w / three usb ports on the back.  One of these ports to connect printer.  I think I need to make a set to the top of USB devices in xp mode, but do not understand what I have to do.  Anyone using xp mode and windows virtual PC with windows 7 that can simply explain it would be appreciated greatly.

  In XP Mode, set the plotter to XP Mode in the USB menu in XP Mode header bar.

• Windows XP mode and Windows Virtual PC

  My old system crashed (looked like 15 years in any case lol) and a low-cost system now has the SATA card and readers, but my old HD is ok. My new system is installed with Windows 7 Ultimate, but my old HD has WinXP with all my music, games and other software. I'll get the IDE to SATA Adapter block, but in any case, here's my question... I want to reuse my old IDE hd with all my files from WinXP on it and I did a reading in this Windows XP Mode and Windows Virtual PC and I would like to know if someone is using this download mode of Windows XP to Windows 7 and what questions have known and if it is worth, but for me it would be worth cause I had some problems with my (x 86) software from the re - install it on my Windows more recent system 7 and Win7 is a big update for me and my new system only cost me about the same price it would just go out and buy Windows 7 Ultimate lol.  The experiences and knowledge of Windows XP mode on Windows 7 would be helpful thanks in advance...

  Hi RussBrad,

  Thanks for posting your question in the Microsoft Community.

  Based on the information, you want to know if you can run Windows XP mode without any problem in the Windows 7 system.

  Windows XP Mode lets you run business software Windows XP older right on your Windows 7 desktop.

  Windows XP Mode comes as a separate download and works only with Windows 7 Professional, full and business.

  Windows XP Mode performance depends on the configuration of the computer.

  Since you are using Windows 7 Ultimate edition, you will be able to install and use Windows XP mode without any problem.

  For more information, see the articles:

  Windows XP Mode

  Install and use Windows XP Mode in Windows 7

  Hope the information is useful.

  If you need further assistance, please answer and we will be happy to help you.

• Problem installing Windows XP Mode in 7 Winjdows

  I have a problem installing Windows XP Mode in Windows 7 Pro 64 running on a Dell Latitude E6510 laptop with an i5 processor and 8 GB of ram.  This machine supports hardware virtualization, and it is enabled in the BIOS.

  Before downloading software in XP Mode, the MS download required Windows validation Web site.  Downloaded and reported validation validation and a successful installation.  Then I downloaded Windows XP Mode (WindowsXPMode_en - us.exe, 481 052 KB) installation package and the package of Windows Virtual PC (Windows6 1 - KB958559 - x 64 - RefreshPkg.msu, 16 692-Ko).  Then, I installed Windows XP Mode; the installation ran without any problems apparent and reported success.
  According to the docs of download site, the next step is to: "... click on the Windows 7 start button , and then select all programs > Windows Virtual PC > Windows XP Mode to begin the installation."
  My problem is Windows Virtual PC does not appear anywhere in the selection of all programs list - believe me, I looked.  There is, however, a new directory called
  c:\ProgramFiles\Windows XP Mode\
  but it contains no exe file.  It contains a file of 1.2 GB called Windows XP Mode base.vhd - but it is not clear what to do with it.  There is also a tutorial subdirectory.
  I tried to reinstall Windows XP Mode (without uninstalling first) but I just get a warning message that the program is already installed.  Windows XP Mode appears on the list "Uninstall or change a program" in the module programs and features in Control Panel.
  I tried running (Windows6. 1-KB958559-x64-RefreshPkg.msu(Windows6.1-KB958559-x64-RefreshPkg.msu, goal that throws error 0x8007000d, "The data is invalid."
  If at this point, my question is simple, "what to try next?
  Thanks in advance.

  The right way to install Windows XP Mode, you must first install Windows Virtual PC, and then install Windows XP Mode.

  You must install both files:

  1 Windows6. 1 - KB958559 - x 64 or x 86 architecture that you run

  Restart the system, and then install:

  2 WindowsXPMode_en-we

  ------------

  Uninstall Windows XP Mode:

  Click Start, type: programs and features

  Press enter on your keyboard

  Scroll down

  Select Windows XP Mode

  Click Change/uninstall in the command bar

  Uninstall Windows XP Mode

  -----------------

  Restart your computer

  Proceed with the installation of Windows XP Mode in the right order.

  --------------

  If it does not always show upward:

  Click Start, type: enable or disable windows features

  Scroll down

  Make sure that Windows Virtual PC is checked

  Click OK

  Reboot if prompted

  -------------------

  http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/

• I want to install the Commander of the force star wars on my new PC, but says it is not compatible with windows 64-bit. I try the windows XP mode and it tells me that I need to connect a hardware device 3D

  I want to install the Commander of the force star wars on my new PC, but says it is not compatible with windows 64-bit. I have try on windows XP mode and it tells me that I need to connect a hardware 3D device. I really love the game and I want to use it again.

  Any old copy of Windows XP that could be installed in the host system? If you do not, it should be available at a modest price of an online seller. Perhaps (I'm not too), even an old Windows 98 TO work. The game (using a 3D engine) will not work under pure DOS, so you need a Windows environment so that it can work. Just FYI: If you get this old classic to run, new issues may arise. Known are the "mss32.dll" runtime error (you may need to replace this file with the newer version of SW:KOTOR 1) and the issue of video cutscenes (the games uses an obsolete video codec, Smacker - either you find an old *.) DLLS for it or have you convert movies in a modern format).

  In conclusion: get old games to run on software/hardware modern (it is not only a problem of BONE) is one of the most fascinating and rewarding challenges to a real fan. But do not expect it will not be easy "out of the box" (or simply insert a CD).

• Windows XP Mode and regular updates?

  Is there a reason to run windows update (update the operating system software) while running in windows xp mode. I hope I made that clear, let me explain more. I am running win 7 pro 64-bit. I've updated regularly. I run also some programs in win xp

  Yes.
   
  It is just Windows XP running as a virtual machine.  He has access to everything you want to give access to and must be treated as another computer.
  
  --
  Martin Stanley
  MS - MVP
  --
  How to ask Questions the Smart way
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

• Problem installing window xp mode

  I recently formatted my window 7 laptop ultimate. Try to reinstall the xp mode window according to the instruction. 1 I installed window xp mode. 2nd virtual pc which is an KB958559 update. It is just stuck in the installation have and would not complete.

  Everyone is able to advise me

  Thank you

  Hi, Khaled,

  Thanks for your advice.

  However, I managed to install xp mode after a few laps to try. Not really sure how but its done.

  Thank you

• Windows 7 Starter from Windows XP Mode and no connection to the Service of Event Notification

  Today, for the first time when I started Windows 7 Starter, it took some time to load and I was on the 'Please wait' and 'Welcome' screen for far longer than normal. It starts with Windows XP Mode on and an error message:

  Unable to connect to a windows service

  Windows could not connect to the System Event Notification Server service. This problem prevents standard users to log on to the system as an administrator, you can view the system event log to see why the server did not respond.

  By clicking on the notification, but has not sent me a newspaper.

  I force - stop it and it starts in safe mode, did not work. Then, normally two more times and nothing worked.

  I have a button Windows Aero in my control panel, I do not know why, because I'm under Windows 7 Starter, a version that does not include the Aero or Windows XP Mode. Please help and give you more information if necessary. Please help as much as you can.

  Hello

  It would help if you could post a screenshot of the error window.

  In addition, through the suggestion provided in http://answers.microsoft.com/en-us/windows/forum/windows_7-system/failed-to-connect-to-a-windows-service-message/731a2a0a-73bd-477f-ac6b-321f606e9774

  Let us know if the proposals mentioned in the link helps or if you have any questions.

• What is the difference between Windows XP Mode and Windows XP Mode "N".

  It's confusing. Why are there two downloads of Windows XP Mode? And what is the difference between XP normal Mode and XP Mode "N"?

  Thank you for your response.

  The "n" of Windows versions contain no Windows Media Player. It is the result of an agreement with the European Commission to settle the dispute of the competition.

• Acer Aspire V5 - 572G windows update, net and virtual disk problems.

  So I installed w7 x 64 ultimate on my laptop and notiiced windows update does not work. It shows that he can not connet to the server. After trying to fix it I discovered that I need to install net framework, which I tried, but he also failed because when I download the framework and before I press on install it shows me how much to download and it is 0. After I press on install it loads a little and it is said that he was not successful. Also tried to download some programs, such as driverpack, drivers search for and he found this lack gcdbusdevice and dcbusdevice im. When I tried downlaoding them, they seem not to exist. And when I try to install daemon tools or some simillar programs, it will fail to install, or fails to create a virtual disk, and after that the laptop can not stop lights. I have to use the restore point, and then he turns then on.

  So yes, some advice or help would be nice, thank you.

  Please see this link:
  Installation of a different operating system

  There are no drivers Windows 7 for the V5 - 572G on our page drivers.

  We don't support Windows 7 on this model.

• Problem between Windows XP Home and Windows 7 Starter of file sharing

  Hello, I have a problem with file sharing: my desktop computer running Windows XP Home Edition and my netbook runs Windows 7 Starter Edition.

  On Windows XP, I shared a folder: Win 7 is able to open the directory and the files in the list, but there is no way I can open any file in the folder XP, nor that I can transfer the any of these files to my netbook.
  All I get is an error "access denied."

  The XP Workgroup is the same as the 7 home network, and the users have all the privileges on both computers.

  Can you help me to sort out what is happening, please?
  Thank you.
  B.

  As a first step, you have XP Home, which means that the 'Simple file sharing' is applied on this machine.  In addition, this means that any network connection on your XP Home of any another machine machine is forced to authenticate you as a user 'Guest', regardless of what a privilege that may be the real user.  In from here, it would seem that the 'Guest' user doesn't have privilege for the files or folders that you share.  To resolve this problem, you must change the access permissions to these files.

  If you drag (move) files on your computer in your share folder, the origin on the file permissions will be maintained.  On the contrary, I would say that you copy the file to the shared folder by dragging with the right button of the mouse and select 'Copy' instead of 'move '.  A copied file will end with permissions for the destination folder that will be generally more suitable for sharing.

  To the files and folders that are already in this folder, to change permissions, you must Access the 'Security' tab under the Properties screen.  In XP Home, this is possible if you log in as administrator in "safe" mode  To start your computer in Safe Mode (repeatedly tap the F8 during the startup key key), connect you as an administrator user, navigate to the file or the folder with problems of access, right-click on it, select 'Properties', select the 'Security' tab and set security such as 'everyone' (or 'guest') has the privilege of access you want.

  HTH,
  JW

• problems with windows media pleyer and download adobe flash player

  I try to run the adobe flash player, but I can't show the computer a sign and said is a bit of problem the session of windows media...

  If any buddy can help me pls...
  Thank you

  This forum is for Microsoft Security Essentials.

  For Media Player support go here >

  http://answers.Microsoft.com/en-us/Windows

  and here >

  http://support.Microsoft.com/ph/7763

  For Adobe Flash support go here >

  www.Adobe.com

• When I versteckte UN of a page of the document, it parts of four is scanned en! Comment to solve the probleme.sur windows 7 pc and printer epson sx 105

  When I versteckte UN of a page of the document, it is scanned in 4 parties.comment solve this problem. PC windows 7 epson sx105 printer

  Hello

  You asked your question in the English version of the Microsoft Community. Please could you click on the globe icon to the world (change region) at the bottom left of the screen and then choose your preferred language. Now ask you question once again.

  

  If you can't find a suitable language, please go here:

  http://support.Microsoft.com/common/international.aspx

  for other international support options.

  Thank you.

• Problem with Windows Media Player and MTS to video clips

  When I load my video files MTS (AVCHD) of my Canon Vixia HFS100 camcorder to my PC and try to open and view them in Windows Media Player, I can hear the sound but I do not see the video. What can I do to fix it so I can not see the video?

  Something to try...

  Make a copy of one of your. MTS video clips.

  Click associarions / rename it to? MTS of?. MPG

  Try to play in Windows Media Player.

• File will not play on my office, continues to play on my laptop. Problems with Windows media player and codecs.

  Hello

  Recently, I noticed that the music that I transferred from my laptop on my desk wouldn't play. Yet the file can be opened and played in quicktime and itunes. I thought that maybe the files were corrupt, I got them again (it was the Street fighter x Megaman OST). I uninstalled windows MediaPlayer and re installed. that did not work also. I even downloaded a codec pack, but he seems to have no effect on wmp.

  Someone has signs? I don't know if it's okay post a link here, but. http://Bandcamp.com/download?ID=2420082343&TS=1405064405.1593839443&TSIG=6a0890ff114356e635fa45d80ac0377d&type=album bam, that's when I get my music for example.

  What special codec is this? I thought it was a normal MP3, but I guess I'm wrong.

  K - lite codec pack is free and safe, and it includes almost all the video codec and audio codec.