Problem OS5.0/6.0 detect the State of coverage in 2G networks

Similar Questions

• Is it possible to detect the State of hide/show the region...

  Hello
  Is it possible to detect the State of hide / display area.
  
  I have three regions/hide RX, RY, RZ.
  When an EX event happens, then region RX should expand and the rest of the region collapses.
  
  When an event happens EY, then region RY should expand and collapse the rest of the region.
  ........
  ...
  
  We can use this JS on DA to change the status of a region:
  

  $("RX.uRegionControl").click ();
  $("RY.uRegionControl").click ();
  .....

  But, first of all, we need detect the State of where applies this da?
  
  
  I'm working on apex 4.2. Theme 25.
  
  Kind regards
  Fateh

  You can try this

  //example
  $('#RX .uRegionContent').is(":visible")
  // this will return boolean - true if it is expanded and false if collapsed
  

• I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center.

  Connection to the local network - properties dialog box

  Hi, I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center. But I can't access the Internet. My OS is Windows 7

  Hello Rajaneer,

  Is the computer that you are using a personal computer or a work computer?
  You will need to re - install your network card drivers like something was damaged and it prevents you to access the property:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• How to detect the State of a LabVIEW test success/failure

  Which variable TestStand should I read to determine the State of a test of TestStand set success/failure?

  I use the parallel model and LabVIEW can see index of my process with the variable "RunState.TestSockets.MyIndex", but now the LabVIEW needs to know if this process was successful or failed the entire test.

  Possible, recommended to capture those (so do not use the "built-in controls visible TS') is to capture the UIMsg_EndExecution (which is generaated automatically if the engine ends an execution).

  This message to user interface, you can access its data, one being the property of Execution.ResultStatus and execution.

  See using TS for the possible values of ResultStatus. This allows to control indicators on your UI.

  hope this helps,

  Norbert

• Detects the State of entire line

  Hi all

  I have a use case in which I editable table (Table has 4 columns) where the user can change lines. I want to detect all the rows that have been modified by the user and save the old baselines in another data table before you post the new values (modified).

  I have seen a few examples where we can detect a particular attribute has changed or not, but I don't know how to implement the change of the whole line. Please help me with this.

  I use components rich ADF, ADF BC, JDev 11.1.1.5 and Oracle database

  Thank you

  Rajesh.

  Hello

  actually simpler would be to replace doDML on the entity object (entity impl) and then perform the operation of database from there (using a prepared statement PLSQL)

  Frank

• Detect the status of calendar wireless sync...

  Hi all

  Is it possible to detect the State of wireless calendar synchronization, as active or disabled?

  Thank you

  No, there is no API that allows you to directly query this information.

• IntelliPoint 8.2 will not detect the 4000 Wireless Mobile mouse

  I'm running Windows 7 pro 64 bit on a mobile workstation Dell M4800.  I bought a mouse Wireless Mobile 4000 which is supposed to have programmable buttons.  I went to the web page of material/downloads and downloaded Intellipoint 8.2 who is supposed to be the software for this device.  The software installed with no problem, but it will not detect the mouse and I can't program the buttons.  On the devices tab, the program detects the touch pad mouse and Dell (listed as compatible mouse HID).  The mouse works with the basic functionality, but I need to program the buttons

  Hi John,.

  If you have installed the correct versions for the mouse, then, it could be a problem with the mouse settings associated with the soft keys.

  For confirmation, this is the link for the latest driver:
  http://www.Microsoft.com/hardware/en-us/d/wireless-mobile-mouse-4000

  If the driver is in place, I suggest you to contact the Microsoft Hardware support for additional help:
  http://www.Microsoft.com/hardware/en-us/support/contact-us

  Please let us know if you have more queries on Windows.

• detection of State animation

  
  I'm looking to find out how to detect the State of the animation. Specifically, it has stopped playing or reached the end of the animation. I do that in Actionscript code? or I can detect it with of html or javascript code on the page that incorporates the animation?
  
  For example. I use JDIC to open a browser window to play the animation. When the animation runs its course I want to window to close. I can detect the end of the animation on the imbedding page?

  Maybe try to create a new shell swf that loads other SWF files when running. You can add your Detection to this file to know when the animation ends and close the window if necessary.

• Configure the host and the VM on two separate wireless networks

  Hello community, I was a browser for a long time, but this will be my first post.

  I would like to begin by saying that I have always found the answer I was looking for by browsing these forums and that I browsed discussions thereon and consulted the chapters regarding virtual networks in the manual workstation 7.1, but at this stage were still unable to solve my problem.

  The scenario:

  I'm a small business working in a House (upstairs) / hookah lounge (bottom). We recently had a second internet connection (WORK), Internet home of my family (HOME), to provide our customers with a free wi - fi. I would use the connection of WORK (during our hours of downtime) in a Ubuntu VM for folding and seeding of torrents. I want to put this far on a network traffic will not affect the other.

  The network:

  SE host: Windows 7 Pro 64-bit

  (Host) NIC: Intel PRO/Wireless 3945ABG (Mini PCI)

  VM: Ubuntu 10.04 on VMWare Workstation 7.0.0 build-203739

  NIC (VM): Alfa awus036h (USB)

  
  

  The current configuration:

  Network connection is made, the State of replication physical physical network is unchecked.

  The Alfa is connected to the virtual machine and is no longer present on the list of the network adapters in Windows.

  It seems that I have to manually disable the "auto eth 1" interface or the virtual machine using the internet connection in host rather than the network of your choice that the Alfa connects to in VMWorkstation. The speed of the internet with eth auto 1 is connected is quick and consistent, but using it defeats the purpose. Strangely, when I go to network connections, under the "last use" for "eth 1 auto ' it is said 'never '.

  When "eth 1 car" is disconnected, it seems that the virtual machine uses the network wireless connected to the Alfa. But the internet speed is very slow and inconsistent. On downloads, the speed varies considerably; Also, it remains at 0 kb/s for a while before going to 80 KB/s, then works his way down to 0 kb/s again.

  Possible solutions:

  1. it's a driver problem for the Alfa inside the VM environment all this time?

  2 just misunderstood how to set up this kind of virtual network?

  3 is it possible to get the desired configuration by filling the WORK and VMnet0/1/8?

  * Note: Only VMnet1 and VMnet8 appear on the Windows network connections, however isn't VMnet0 bridged one responsible for networking?

  4. upgrade to the current version of the desktop would be useful?

  5. do this problem originally because of some settings on the router?

  * Note: The AP is close enough to provide a signal strength of 85-90%

  Sorry to be so talkative, I just wanted to be as clear as possible because I'm still a beginner to learn more about virtualization.

  Thank you in advance, as always, your help is greatly appreciated.

  First of all, I must say that when I did this last response, I've been on my Mac and I thought the configuration of a host of Windows XP however outside the nomenclature of the names of the host network settings dialog box the rest stands as it is on a host Windows 7 as described below, including a picture as an attachment.

  On a Windows 7 x 64 host with two network adapters, each on a different subnet and VMware Workstation 7.1.3 installed with the editor of virtual computer network configured for VMnet0 and VMnet2 jumpered separately to one of the host of NIC and I have not changed the settings for Windows 7 host NIC-1 and have network/Internet connectivity to the host of this NETWORK adapter as shown in the picture of Google in Internet Explorer on the host computer.  In VMware Workstation 7.1.3 I have a Linux Guest configured to use VMnet2, which is filled in the settings and the Windows 7 host NIC-2 have all with the exception of VMware Bridge Protocol unchecked and have network/Internet connectivity in the guest as indicated by Google in a browser.

  From the perspective of connectivity network between the host and the guest by NIC - 2 on the host computer when all with the exception of VMware Bridge Protocol unchecked there is no connectivity between the two on this subnet because there are no protocol at stake to allow the conversation to take place.

  So theoretically and in practice what I said previously, but didn't were not expressly with a Windows 7 host in mind, nevertheless what I said is true and accurate, as evidenced by world real test/use by what I said and with the image attached herein.

  FWIW Windows 7 has been configured with the default settings and the only changes to the host's network were those made during the installation of VMware Workstation 7.1.3 so with the configuration I discussed with the attached picture, there is no reason why the host and the guest cannot be on different physical networks and each network/Internet connectivity based on the information I have provided and they be isolated from each other by being on separate physical networks.

  That said, even if they can be isolated by being on separate physical networks can still can connectivity between the 2 through VMware shared folders it it turned on and of course & slide and other services so if absolute isolation is necessary to the point where it can be, and the guest still operating system run on a Virtual Machine in the host you would need to disable the Backdoor for VMware Tools cannot provide shared folders on VMware, & glide and other services.  So if you need this isolation level let me know and I will provide additional information to complete it.

• XP hangs at startup and the dialog box provides the following: a problem has prevented Windows to check exactly the State of this computer

  I am rebuilding a system that has been attacked by several viruses and had to rebuild XP using the Windows installation disc.  After completing the repair, I was greeted by the XP logon screen and I tried to log in as administrator. The standard screen grass-hill appears followed by a Windows dialog box to activate product indicating "a problem has prevented windows to check exactly the State of this computer.  To keep your copy of windows must be activated with Microsoft. You want to activate Windows now? "If I choose 'No', then Windows drives me back to the login screen.  If I choose "Yes" then Windows does nothing - activation does not occur and XP does not start... the system just hangs.   I also tried to open a session without failure, but he said that I could not activate safe mode and started back me to the login screen.  I am able to get to a command prompt, if I select Mode safe mode with prompt at startup.  FYI, I am able to view the structure of this version XP Directory when I configure the HARD disk as a slave on another system drive.  Any help to resolve this matter will be highly appreciated.

  I have exactly the same problem and after 2 days of searching and trying stuff found on the internet, I have solved this problem.

  At my computer configuration: Windows XP sp3 with IExplorer 8, but had to go back to the repair facility after that some system files have been corrupted, do not know why.
  My repair CD installation was: Windows XP sp2

  In my view, the main problem is that after the installation of repair, the system obtained in conflict of existing versions of IExplorer 7 and 8. IE 7 & 8A prevented the application of activation of MS (OOBE) of working after the installation of repair, the OOBE application silently chrashed and prevented the logon process.

  I couldn't connect even in safe mode, BUT with failure + command prompt, safe mode I managed to log on! So, choose the mode without failure + command promt in the trunk. Then open a session with success. Then close the command prompt and press CTRL + ALT + DEL to Task Manager. In task manager launches the new application "c:" and answer 'No' to the following question, and after an error message you c: drive open and you'll have office. You can close the System Restore Wizard who opened. Then go to c:\windows\ie7\spuninst and run spuninst.exe. Do the same to c:\windows\ie8\spuninst. After you have uninstalled both, restart windows, and after the first issue of activation, you should get the big activation dialog box.

  I have spent a lot more time, because I was told that uninstall IE7 and IE8 is possible to do this via the command prompt. I did, but it has not fixed my problem. Then I tried a thousand other tricks at the same time.

  Please let us now if this helped you.

• SPA3102 problem: State PSTN: still rings in the State

  We got a new router Linksys SPA3102 VOIP gateway, and we have some problems to operate.

  The SPA3102 is properly connected to the local network, but it seems to have problems with the incoming PSTN line.

  However, it does not sound when I call the number RTC. On the other hand, State PSTN always says 'Ringing '...

  When I restart the SPA3102, then the extension on the pbx sipx she must call rings (without anyone calling the PSTN number).

  The status page says something like:

  Voltage: 14 (V) loop current: 0.0 registration of (my) State: not recorded the last record to: next record in: last call VoIP number: [email protected] last call number RTC: last calling VoIP: last PSTN Caller:, last RTPC Disconnect reason: CPC Signal RTC activity Timer: 30000 (ms) mapped Port SIP: 5061 Type of call: VoIP Gateway call VoIP State: Idle PSTN State : ringer VoIP: tone RTC:

  (Note: the bridge didn't need to register for the sipx-pbx).

  While it fires after a reboot of the SPA3102, nothing happens when I dial my mobile PSTN - I hear only ringing on mobile (it says busy or more).

  Does anyone have advice?

  Andreas

  It did not break. The problem was with the cable to connect to the UK British Telecom. I haven't used the gray wire that came with it, but used a telephone cord UK I had to hang out - bad move.

  When we talk about Linuxemporium, there where I bought the SPA3102, I was made aware that the cable might be the problem. So I went on the road in a small phone shop to get a US - UK adapter (packaged with the SPA3102 is still an American cable), that didn't fix it. I had another well-known adapter from a retailer of Electronics UK, and that one has solved the problem. The SPA3102 fortunately now works as my PSTN gateway.

  I hope this can help others with similar problems.

• Cannot install network printer on Windows 7. Detects the printer then it says cannot locate the driver. All my vista and XP machines have no problem finding drivers. It is a 32-bit 64-bit vs questions? How can I fix it?

  Cannot install network printer on Windows 7.  Detects the printer then it says cannot locate the driver.  All my vista and XP machines have no problem finding drivers. It is a 32-bit 64-bit vs questions?  How can I fix it?
  Windows Server 2008 network.  Printers have ip addresses. Install the drivers from the Print Manager.  /Terminal Server Workgroup installation.

  It's the same situation with XP.  The print driver names must match.  If you notice the name of the printer driver that uses XP is a name different from the one that is installed when you plug in the device on the Windows 7 computer.  This is just my assumption, please correct me if this isn't the case.

  The real solution is to install a 32-bit driver on the XP machine that uses the same name that the 64-bit driver and share a printer using this driver or find a 64-bit driver that uses the same name as the 32-bit driver installed on XP and install the driver on XP.

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• My pc has detected the error: hardware changes would have no problem detected.

  Original title: my pc encountered chnges hardware could not be detected problem, when I visited my troubleshooting... im running windows7 family Basic... What am I going to do to solve this problem.

  my pc hardware met chnges could not be detected the problem when I visited my troubleshooting... im running windows7 basic family... what will I do to solve this problem, id already run microsoft fix in my pc but nothing is changed, I went to to see Device Manager if there is a problem, but I see no problem in Device Manager What does this problem mean? Please help me, your answer will be...

  Hi Javedpasha,

  1. when exactly you receive this message? Are you facing problems using USB devices?

  2. what Fixit did you run?

  3. What is the brand and model of your computer?

  4. What is the full error message that you receive?

  5. have you made a recent software or hardware changes to the system?

  This error occurs generally when the audio / sound does not work.

  Method 1:

  You can check the manufacturer's Web site and try to install the latest version of the drivers for the chipset, sound, network card and the display.

  For more information, see the article:

  Updated a hardware driver that is not working properly

  Method 2:

  You can also try to run the hardware and devices Troubleshooter and check if it helps:

  Open the hardware and devices Troubleshooter

  Disconnect external devices attached to the computer (except the keyboard and mouse) and check if it helps.

• I have the dell vostro 3450. I have problem with "ST Micro Screen detection sensor is not compatible with win 7.

  Hello

  I have the dell vostro 3450. I have problem with "ST Micro Screen detection sensor is not compatible with win 7.
  can someone help me please.

  THX,
  Sepahdar

  http://en.community.Dell.com/support-forums/laptop/f/3519/t/19390317.aspx

• When we install, we get massage: "we met the following problems. Setup could not initialize. This could be due to a missing file. Please download Adobe Support Advisor th detect the problem. "However, when we click on"Get Adobe Support Advisor.

  When we install, we get massage: "we met the following problems. Setup could not initialize. This could be due to a missing file. Please download Adobe Support Advisor detect the problem. "However, when we click on"Get Adobe Support Advisor. It is not to us to show how to solve the problem.

  Hello

  Please see failed to initialize the installation program

  "Installer initialization failed." I have tried everything what it but no dice.

  setup initialization failed

  I hope this helps!