Problem reading music Sansa E280 v1

Similar Questions

• Sansa e280: problem bad track/formatting (screenshots included)

  Hello, I have had my Sansa e280 for a little less than a year now, and have not had any problems. recently, however, I met a block that prevented me from using my Sansa.

  first of all, I turned off my Sansa one afternoon while listening to a certain title. minutes later I turn it back on to finish listening to it, and it gives me a message "Bad Track" and refuses to play. This message appears for more than half of the music that was on my Sansa (no one who has ever had this problem). I tried a few things common sense, as the withdrawal and replacement of the music. that did not help, the message was the same on the same tracks. so I removed all my Sansa music and went to the internet to find the problem.

  most of the people with this problem are being told to format the Sansa. I followed the same steps several times to deal with the "this device cannot complete the format" or some nonsense. so currently, I had the original problem can only be fixed with something I can't do. In addition, my Sansa is on my desk in two pieces (I took the case off voltage and battery, nothing major).

  In addition, I can't delete the video files that I have on my Sansa when I tried to manually empty my Sansa, it gives me an error in the sense of "the device cannot complete the task because it has stopped responding / is not connected.

  Finally, I tried to do the other way of formatting, by starting it upward in the recovery and as a result a FAQ that I found on this site, but when I enter the removable disk in my computer, there is nothing there but a text of the document which essentially lists the details of the product.

  to drag more far, here some screenshots are accompanied by more questions.

  http://i91.Photobucket.com/albums/K298/Armageddon_04/sansaproblem1.jpg

  in the first note above, there are three songs, two from Rancid and one named ' AV74B8 ~ 1.MP3 '. I have no idea what is the last of them, or why he says that there is music on there - especially when I can restart it and go into the music folder and it says . Also note that they have a 0:00:00 duration.

  circled in red are a ton of the same file, that too, I don't know what they are or how they did it.

  Blue Square at the top, the "MUSIC" folder When I walk into this folder, it brings me to the next image

  http://i91.Photobucket.com/albums/K298/Armageddon_04/sansaproblem2.jpg

  who is concerned, the same as the record in the first photo, just to show that images and not in the details. If I get the 'MUSIC' folder into this folder, it keeps looping to several records 'MUSIC '. is this a problem? I just thought it was weird

  and here is a picture of my Sansa connected in recovery, there is no hidden files, I checked.

  http://i91.Photobucket.com/albums/K298/Armageddon_04/sansaproblem3.jpg

  I hope this is enough information to get a response, because that's all that I can provide - please help, all entries is appreciate

  You have corrupted files. You must run the command Chkdsk before attempting to format. The instructions are under #9 in the FAQsection. Also read # 12 everything in you'e it. ChkDsk will look for corrupted files and repair them (with a bit of luck). As much as you seem to have, you will need to format it after.

  The reason why you were not able to format up to now is 1.) your files are too corrupt. They need to be repaired to the point where they can be deleted by formatting and 2.) It seems that if your player is in MTP mode. You must switch to MSC mode to format.

  Don't worry, it's not as bad as it sounds. It's just that you'll have to re - load it all after formatting. If you have recently added a few songs just before this problem started, look in the ID3tags of songs with a program like MP3TAG before you put them on your player. If you have any strange characters or foreigners in here, especially in the COMMENTS section, delete them. The correct version of tag you want is ID3v2.3 ISO-8859-1. There are other versions, but this is one (the only) who will work on the Sansas.

  If you have corrupted ID3tags and not corrected before re - load these files on your drive, you're going to do this whole procedure all over again. Just take it step by step and you will be OK.

• Sansa e280: multiple paths to the devices during the synchronization and no MUSIC file

  Feature: Sandisk Sansa e280 8G

  version: 01.02.24A

  I had a problem with my e280. A month ago, I started getting an error message during playback of my music files. The error says "Syncronize to continue music subscription" I have synced to my computer, nothing helps. Soon ALL my music files were giving me this error message. I went on the Sansa website, where I was directed to download and run the device Sansa Recovery Console. I did as instructed, and now when I join my e280, I get TWO paths of devices (E: / and F: /). I am only able to access one of them (E: /). F: / is noted as removable drive and not going anywhere. When I enter in E: / I can not find my music files. When I remove my camera, he did a restart of automatic system, as soon as the restart was successful, it updates the database for about 10 minutes. I synced the device and my computer prompted me to format the device. I formatted and I still no MUSIC file. The device has been wiped and I thought it would be best to seek professional help until I made the situation worse.

  If there is any other information needed to tell me what it is and, in the worst case scenario, how to find and I'll post it as soon as POSSIBLE. I know it's a lot of problems for a single device, but any help at all would be greatly appreciated!

  Thank you for your time,

  Dibbz

  Unless you are dealing with the Rhapsody subscription service, the error message "sync" is probably due to problems, DRM , Windows Media Player created without your knowledge. It is turned on by default in WMP, & unless you know about it from the start, you can do it yourself untold headaches.

  If you are ripping from CD to the .wma format, uncheck the option 'Copy protect' in the rip settings tab. It's the guy causing the problem. If you do not rip your own CD and downloading these songs instead, they have a DRM encryption. Try a different and/or source format. MP3 files don't have any crippling DRM.

  You must delete the files on the drive and start over with new, best non - DRM. If RIP you to .mp3 format, it won't be a problem, more there are other benefits on the Microsoft/WMP .wma format.

  When connected in MSC mode, your computer will detect your drive as just another flash storage device; actually 2 separate devices. 1 will be your drive (internal memory). In your case, E:. F: received the external memory card slot, if there is a card in it or not. If you have no card in the slot, that's why he 'not going anywhere '. Perfectly natural and nothing bad here.

  The MUSIC folder (and others) are hidden by default. You have to display .

  Formatting will erase all content, so this is only necessary performed as a last resort. It's a PITA to re - load it all so that you do not want to unless it is absolutely necessary. But now that yours is formatted, you can start over w/o of the DRM BS and your problems should go away.

• Sansa e280

  Hey. When iv downloaded the music from my laptop to my sansa e280 I cant find the music on the mp3 player, but when it is connected to my laptop, its top show here... And it seems freez sometime. Anyone has an idea on what could be the problem?

  Thanks for giving my a recovery as soon as possible.

  Is one of the music show up in the "Unknown" category in the lists (artists, Albums, Genres) on your drive?

  Could bad or full-in information (or even total lack of) the ID3 tags of music files. This situation is also known to cause occasional freezes, too.

  If the Sansa can't read the ID3 tag (corrupt characters or foreign or wrong format) to fill lists during the updating of the database, he doesn't know what to do so he just stops or crashes.

  Remember, like any computer they are not too bright.

• My sansa e280 v2 does not recognize my 4 GB sdhc card

  My sansa e280 v2 does not recognize my card sdhc and i ' v ever read other posts, but it does not work. i ' v used in msc mode, but the music does not appear. It happens on the computer, but of course I need extra space.

  some posts say always use rockbox anyway, but I do not understand what to do.

  Help, please!

  RB firmware does not replace the, but rather sits next to him. You can start either at will. The Rocbox utility should install everything for you.

• Sansa e280 not recognized by the pc

  Hi all! I'm new here and I recently had a problem with my sansa 280. I know that for my sansa display in the pc I need to put it on the usb mtp mode. But when I put it on the pc, it does not recognize my computer and he says: "usb malfunctioned or not recognized by the pc. When my sandisk is out of the computer works perfectly. How can I get my computer to recognize the sandisk card? I want to put more music on this subject, and I can't! I use windows vista. Please help me, I would appreciate your help a lot!

  I had your exact the same problem. You can read in the thread I started. I pasted the answer that worked for me here.

  c1u31355

  Download Windows Media Player 10 or 11 from www.microsoft.com and reinstall it. This usually fixes things. Next step, but only if this does not work, is to get the "MTP Porting Kit" from Microsoft and install it.

  Let us know if those who help or not.

• D:\ is not a valid win32 application. CD/DVD drive reads music CDs, but no installation CD

  I recently reinstalled my Thinkpad T42.  After installing XP and install all updates, I tried to install Microsoft Office Pro 2003 by CD-ROM.  My CD/DVD is not able to read the CD and gives the following error D:\ is not a valid win32 application.  The drive can read music CDs and works correctly.  The Office 2003 installation cd is clean and works on other computers.

  Any suggestions?

  Thank you

  Yes, you are right logically.

  Now I see two sceenarios for the solution to analyze your clues:

  Number 1: Technically on the media (e.g - CD/DVD) in what place (at level nm) is the setup.exe, which might be a little corrupted or overburn.

  To read the corrupted or overburn data recording Media(e.g-CD/DVD), lens optical drive must be precisely align / optimized. But your workout goal isn't in this top performance more. So that it can read only where another player can read that.

  Actually lose everything in a music or movie playback by laser beam data a bit do not count a lot (maybe a drop of a sound level of a few nanoseconds which is missed by our ear) but to read a file .exe must be exact to change a little vital file execution make the whole file unreadable garbage before System. But such laser weakened to run well on music & movies.

  To resolve the installation of MS Office thet you just copy all the content of the disc to your HARD drive & then try to install. If the problem persists copy the .exe to install a USB key, the other car that can be read. Then replace the HARD disk by the corrupt.

  Number 2: (Associated virus infection) Your system might be infected severely by code viral insertion of viruses. While any execution of .exe file is impossible on the system, CD/DVD and HARD disk USB storage etc & they won't take their appropriate icons. Basically, he attacks the windows installer component & ban the user to install/play no matter what .exe file that require the help of Win Setup. So in this case change media with a new will not solve the problem. Except for the removal of the virus or system shape. So, you can use free Malwarebytes to scan.

  You can use eset online scanner , scan side by side with

  Microsoft® Windows® malicious software removal tool.

  On the last day of your Windows install 4.5 at the bottom of the link that might help too:

  Windows install 4.5 for 32-bit Windows XP

  Also will help restore registry associated with .exe.

  Conclusion: I'm going to, I said that the title of the thread is not quite right, as you cannot read data from a particular MS Office installation media. But this is not the case with any medium of data disc or installation. At least until your DVD drive so were unable to read all files on the disc, then it might be a pure hardware problem. But as you can see all the files except the .exe files, then there is an uncertain probability of hardware problem.

  Now, you do the analysis & tell me is happening with any media/.exe to install file. Who here has solved your problem

  Ask for additional assistance if necessary.

  S.Chatterjee

• Error when you try to play audio files: Windows Media Player has encountered a problem reading the file. for further assistance, click web help

  8007007E tips

  There is also another number which is C00D11B1, but both have to do with the lock of the music in windows media player, the message said:-"Windows media player has encountered a problem reading the file; for help click web help. ""- and that of all, but when ' web help ' click on the show numbers that are 8007007E and C00D11B1 and average music, not Windows media player, y at - it someone with the same problem that has been able to solve? Thank you, let me know, if you don't mind, thank you again.

  I suggest re-download you WMP 11 from the following link and install it on top of the current installation:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1d224714-e238-4E45-8668-5166114010ca

  Who help me?

  If this isn't the case, please report the file type (extension) of the file you are trying to play. For instructions on how to make Windows Explorer shows the file types, see this link:

  http://www.windowsreference.com/Windows-XP/how-to-view-all-file-extensions-in-Windows-XP

• SanDisk sansa e280 V1 keeps looping (stucks) on the spalsh screen

  Hello

  I had a serious problem with my Sandisk e280... The other day I was listening to just when all of a sudden my mp3 restarted without any warning... now it's keeps looping on the home screen (black screen and "Sandisk" in white letters). Normally after the splash screen, you will see the main screen (menu), but my screen goes white then leaves (splash screen).

  Someone at - it suggestions?

  Thankss!

  Try:

  1 - holding the power button for 20 seconds to "reset". (and then turn it on)

  2 - take the battery for 30-60 seconds, then put the file in

  3 - switch to recovery mode, create a folder called "Sansa.fmt" and drop it onto the Sansa. It reformats itself when you turn it off. (DO NOT NEVER FORMAT the disc "16 MB format"!)

  4-if those who do not work, sometimes the 'Chip RAM' wiggles loose. Please dissamble it, push it in firmly and try again. Photos and instructions are HERE.

• Sansa e280 is not usb mode in the menu settings and is not recognized by pc

  My sansa e280 is recognized by my pc where it was originally regestered, but is not recognized by another identical pc. It also has no usb mode in the settings menu, so I couldn't use the suggested by forum solution.

  Thank you very much! I understand it on my own through the main page of Sansa.com. Now, after the last firmware download it has 3 settings/USB modes: detect the DPW, msc and auto. Still no problem on my PC. The another, unfortunately, is 5000 miles away. Hope, it will work here, too. Thanks again.

• Sansa e280 - unknown files - mp3tag.m3u is not supported

  Hello

  I bought a sansa e280. First, almost all the files were unknown - I read the other reviews - downloaded mp3tag v2.42.a, modified to ID3v2.3 ISO-8859-1 as the replaced tags witl Ctrl + s. I copy, resulting in 'mptag.m3u is not supported. what I did wrong?

  Another thing is unclear: How can I remove database?

  Thank you

  Peter

  Just highlight all the tags and save them (as ID3v2.3 ISO-8859-1). You will see ID3v2.3 in parentheses.

  .m3u is a playlist file, then maybe make a playlist with CTRL +. If that's what you want to do, you must save the playlist in the folder with MP3.

  The data base in a v1 is the DATA folder in the SYSTEM folder. You must UN-hide the folders hidden in the Options of folders in Windows.

  The database in a v2 is mtable.sys.

• Problem reading Audio of WMP11 after you increase the playback speed.

  Original title: problem reading Audio of WMP11

  I'm using Windows Vista 32-bit with Windows Media Player 11. After awhile, my music sounds like it is blurred. Specifically, sometimes while I increase the playback speed. This happens on 2 different computers, so I excluded a possible card problem.

  EDIT: I forgot to mention, all the parameters are normal, and all the improvements to my device are disabled.

  Make sure that disable all improvements is checked, as suggested at http://windows.microsoft.com/en-US/windows-vista/How-do-I-stop-my-music-from-skipping-or-breaking-up-when-I-play-it . Tim Baets
  http://www.BM-productions.TK

• Error message - problem reading disc on Satellite

  I wonder if anyone can help. Was a virus on my laptop satellite scan to home (don't remember the model) 2 days ago, when the screen is blue and it was a mistake long message means the laptop has encountered a problem and stops.

  After that 2 hours, that the cell had not yet arrested so disconnected from the electrical network and removed the battery. To try to restart the computer, an error message pops up saying - CTRL + ALT + DELETE to restart problem reading disk. When I made the order it seemed be restart but then returned to the original statement of CTRL + ALT + DELETE. Tried again and amel and can't stand up boot.

  Someone had this problem before?

  Hello

  It seems that it's not possible access to the HARD drive or it is not possible to read the data on the HARD drive.
  I don't know why it happens, but first of all, you should check the boot sequence in the BIOS. If everything shows ok, so you should try to start form the OS cd and check if it is possible to install the new OS.
  If this is not possible if the HARD drive has a fault and you need to replace.

• Problem reading text file

  CVI programmer for several years, but it has been awhile. Trying to read in a text file that displays fine in say Notepad. The first line of text in the file is:

  All temperatures in ° F.

  If I use the scan function, say:

  public static char cdum [2048];

  ScanFile (DataFile, "%s > %s", cdum); I get these results:

  cdum [0] is - 2

  cdum [1] is 65 (which is the ASCII character 'A')

  The rest of the cdum is all zeros.

  In a hex editor in decimal display grouped by bytes, the line is:

  0 255 254 65 0 108 0 108 0 32 0 116 0 101 0 109 0 112... as the display looks like

  ybA.l.l.. t.e.m.p.e.r.a.t.u.r.e.s.. i.n.. °. F....

  So I get the scan function is to see the start character, then by pulling the 65 and placing in the location cdum [1], then strikes the character 0 and leaves the function of scan as she found an end of line. Trying to read in the entire line and the subsequent data float line, but is not serious, I can understand that our after I get over the initial problem above.

  Can someone help me with this? I have no problem reading in ordinary text files, but this one is as it is grouped in words rather than in bytes. Have you tried a bunch of different Scan function modifiers source and target [xt0, w #, etc.], but nothing seems to work.

  Data file attached.

  Thank you-

  Scott

  Hello

  I downloaded your file, it is opened in Excel because of its extension and the settings on my computer. I then wanted to save it as a text file normal to see in Notepad and read with a simple C program. In doing so, Excel told me: some features in your workbook may be lost if you save it in Unicode text.

  This is consistent with your observation of 16-bit data.

  LabWindows/CVI, unfortunately, does not support the Unicode character set and functions of the library operated at only 8-bit characters.

  So I would say to convert your file to 8-bit characters; You can also support the pursuit of the Unicode support in CVI here

• Problem reading the worksheet after you use a DLL to write on the worksheet

  Hello

  I have a few problems reading a sheet DLL created in LabVIEW. The DLL is written in C++.

  I'll dexcribe what do the VI in the screenshots:

  For DLL_INIT = the first false steps the VI (LabVIEW) values and exports in a DLL initialization.
  DLL takes these values and not some und calculation, then wrote the measured values and the new calculated values in a csv file called 'filtered_values' and a file 'filtered_values_complete '.
  so, I have two files like this after initialization:

  1.0000000000; 1.0000000000; 18.8991610737; -3.2940000000; 0.0060000000; 0.9000000000; 6.5806287097; -3.2940000000; 1.0000000000; 0.0000000000; 1.0000000000; 0.0000000000;

  So now on DLL_INIT = true.
  For the calculation, the next step i read the "filtered_values" - file (LabVIEW), calculate the new values and write in filtered_values (DLL)
  And in the "filtered_values_complete" - file I will allways read the DLL entry first, so that I can check later, if the DLL has obtained the values to the right of the front step and then add the calculated values.

  For i > 0 initialization has been made:
  -the VI bed sheet "filtered_values" calculation and rotted the table 1 d in its unique values
  -The last seven values in the worksheet have been exported in the dll as well as five new measured values.
  -This DLL is still a few calculation
  - then it replaces the "filtered_values" - file and adds a new line to the 'filtered_values_complete '.

  This migth be a bit of confusion, so a small example, afer five steps it loooks like this:

  filtered_values:
  5.0625000000; 1.0000000000; 18.9300200447; -3.2870000000; 9.7320000000; 0.8997597592; 5.9159054233; -2.6533532901; 1.0000000400; 0.0000000000; 0.8078703403; 0.0000000000;

  filtered_values_complete:
  1.0000000000; 1.0000000000; 18.8991610737; -3.2940000000; 0.0060000000; 0.9000000000; 6.5806287097; -3.2940000000; 1.0000000000; 0.0000000000; 1.0000000000; 0.0000000000;
   
  2.0625000000; 1.0000000000; 18.8330081064; -3.2940000000; 9.7270000000; 0.9000000000; 6.5806287097; -3.2940000000; 1.0000000000; 0.0000000000; 1.0000000000; 0.0000000000;
  2.0625000000; 1.0000000000; 18.8330081064; -3.2940000000; 9.7270000000; 0.8999399568; 6.4077416273; -3.1451829134; 1.0000000100; 0.0000000000; 0.9480589053; 0.0000000000;
   
  3.0625000000; 1.0000000000; 18.7932988441; -3.2870000000; 9.7280000000; 0.8999399568; 6.4077416273; -3.1451829134; 1.0000000100; 0.0000000000; 0.9480589053; 0.0000000000;
  3.0625000000; 1.0000000000; 18.7932988441; -3.2870000000; 9.7280000000; 0.8998799074; 6.2394046705; -2.9768465052; 1.0000000200; 0.0000000000; 0.8988158138; 0.0000000000;
   
  4.0625000000; 1.0000000000; 19.0445703499; -3.2870000000; 9.7320000000; 0.8998799074; 6.2394046705; -2.9768465052; 1.0000000200; 0.0000000000; 0.8988158138; 0.0000000000;
  4.0625000000; 1.0000000000; 19.0445703499; -3.2870000000; 9.7320000000; 0.8998198333; 6.0754981785; -2.8129479844; 1.0000000300; 0.0000000000; 0.8521305805; 0.0000000000;

  5.0625000000; 1.0000000000; 18.9300200447; -3.2870000000; 9.7320000000; 0.8998198333; 6.0754981785; -2.8129479844; 1.0000000300; 0.0000000000; 0.8521305805; 0.0000000000;
  5.0625000000; 1.0000000000; 18.9300200447; -3.2870000000; 9.7320000000; 0.8997597592; 5.9159054233; -2.6533532901; 1.0000000400; 0.0000000000; 0.8078703403; 0.0000000000;

  So it's good enough that the VI and it works fine until some point when the just VI reads more calculation and x = sheet! There? becomes true.

  Most of the time it happens when the csv file is about 1200 lines

  Someone knows why this happens?

  Best regards

  Stefan

  Hello

  understood, that the error occurs somewhere completely else. the thread may be closed

  BR

  Stefan