My sansa e280 v2 does not recognize my 4 GB sdhc card

Similar Questions

• Tecra M5-103 does not recognize the 4 GB SD card

  Hi - my Tecra M5-103 does not recognize my 4 GB SD card, could someone tell me if this size chart is supported in this machine please?

  Thanks in advance

  Hello

  I didn't find any official information on SD compatible card sizes for this laptop but I think that card 1 GB and 2GB SD could run without any problem.

  The 4 GB SD card is definitely not supported.

  If you want to use these huge sizes of SD card, you could buy an external drive of All in.
  These devices are not expensive and you can connect and use via the USB interface.

• Premiere Pro CC 2015 does not recognize my 4 AJA Kona card

  Hello world

  Premiere Pro CC 2015 does not recognize my 4 AJA Kona card.  Here are the specs:

  Computer:

  Mac Pro 2013 (trash)

  OS: 10.10.5

  Map:

  AJA Kona 3 G + 4 e/s

  Installed in mercure Helios via Thunderbolt

  I can capture in the AJA control room, the computer recognizes the card and my Mac Pro towers plays very well with the first CC 2015 + combo 4 Kona.

  What I did to solve problems:

  -Replace the mercure Helios with mercure Helios 2

  -Replace cable Thunderbolt

  -Ports exchanged

  -J' tried CC 2014

  -Restarted

  -Standing on one foot...

  Any help would be appreciated!

  Hi Vinay,

  What has ended up having to happen was 12.3 UN-installing, installation of 10.6.1, can upgrade to 12.3.  Just solved!  Thank you

  jZ

• My PC does not recognize a 16 GB SD card when it is plugged into the interbnal reader.

  I have a Dell Dimension 9200 PC... It reads 1 GB and 2 GB SD cards fine... However when I plug my new 16 GB formatted card it does not detect it.

  Your 16 GB SD card is really a SDHC card.  Even if the card is the same size as the old SD cards, the internal structure is completely different.  To read an SDHC card, the drive must be SDHC compatible.  The reader needs internal 'material' to read SDHC cards.  Therefore, as you said you can read 1 to 2 GB cards, you have a single SD reader.  You will need to purchase a SDHC reader.

• My computer does not recognize my camera or media card more? __

  I use a Canon DSLR and can not get the computer to recognize the card media. It also won't recognize the camera directly? Any suggestions?

  Hello

  ·         The computer is able to recognize the device or media card earlier?

  ·         Was there any recent changes to the computer?

  ·         What happens when you connect the device to the computer (done the camera upward show in Windows Explorer)?

  Try connecting to a different computer and check if that is recognized.

  Check if there is information in Event Viewer which may help us to solve the problem:

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Also run the fix in the given article below.

  http://support.Microsoft.com/mats/hardware_device_problems/

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Sansa Clip - computer does not recognize the music file

  I have a Sansa Clip 8 GB. It works OK. It connects to my PC (Windows 7) and fees. But when I open the music from the PC folder there is nothing in it. There is the music of the clip and he is playing. But nothing in the folder on my PC. The clip has the firmware version: v02.01.35A. His car is up to date. Any ideas?

  Try changing the drive USB MSC mode by going to settings > system settings > USB. If you still don't see the files, try MTP mode. Files transferred in a mode are invisible to your PC when it is connected to the other mode (files transferred in both modes are still visible by the player himself, that's why they play even if the PC cannot find them). The third mode, "Automatic Detection", should be avoided because it can change between the MTP and MSC between sessions without warning, according to the whims of Windows.

• Windows 7 does not recognize Tablet 64 GB sd card

  I have a Nextbook7P12 and have been mounted a 64 GB micro-SD card and my laptop Windows 7 application always format the card. The only option I get is 32 GB.

  I can format the micro SD 64 GB card in the laptop using the converter to SD card, no problem.

  The Tablet confirms that this is a card 64 GB, but as soon as I connect the cable between the laptop and the Tablet, then I get the message 'format the memory card.

  Hello

  Thank you for your response.

  For that matter its best contact SD manufactures, so that they can help you better.

  Please let us know if you need help on Windows. We will be happy to help.

• Does not recognize devices more

  I have OS X El Capitan, 10.11.3 Version.

  Since a few days, my Mac does not recognize my printer more (even if it is properly connected, says 'offline'). I can print from my iPhone / iPad via the network, but not my Mac!

  And from today, even my Mac does not recognize my external, connected sound card USB.

  I wouldn't change a thing, but my Mac doesn' recognize my hardware.

  Help!

  Try this:

  Start the computer in Safe Mode, and then restart normally. It will be slower than a normal startup.

  MacIntel: Reset of the controller (SMC) system management

  Reset the PRAM and NVRAM on your Mac.

  Repair the hard drive and permissions - El Capitan

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

  Repair

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

  Now, download and reinstall OS X El Capitan 10.11.3 Combo Update.

• Satellite 220cds: Win98SE does not recognize ethernet cardbus cards

  Hello

  can someone tell me why Win98se does not recognize my toshiba cardbus ethernet card?

  also, where can I find drivers?

  I really hope that someone can give me the answer!

  Best regards

  computerfreak

  Hello
  First, you must install the driver. I guess that you don't have the installation disc. You need to download a folder of your choice or to where you can find it, it may come as an exe file or a zip file. Install the driver and restarts. Once the driver is installed, you can insert the adapter. Windows98SE automatically installs the driver from your hardware, if a version conflict is displayed, select 'Yes' to use the new file and continue. Resart your computer.
  To find the driver you need, go to driverguide.com and register here, it's free, all you need is a valid email address to activate your account. Once you register with driverguide, check your e-mail and click on the validation link, it'll take you back to the website and you should already be connected, jump offers so that access you the page "welcome to driverguide", scroll down to the driver search wizard, choose your product type of device, in this case , NIC, you should be able to navigate from there and find your driver.
  Good luck!

• Windows Xp P & P does not "see" Nvidia 6200 AGP graphics card

  Hello
  I recently installed windows xp on my win2k replacing desktop (enroute to win7), but win Xp does not recognize my graphics from nvidia 6200 agp.
  Under win2k, it installed perfectly to the original, with P P & grateful he and installing correctly.
  He worked happily for some time.

  However, on windows Xp, I had to go back to vga integrated to install xp and P & P does not recognize.

  Starting with card installed, Bios sees it, as you can see the screens of configuration and windows from the screen, but black screen then to the full operating system.
  No failure or vga mode allow also result to the black screen.

  Its a pcchips m810L mb, v71a with sis730s chipset.
  I tried to Flash the bios, cmos, but no change in compensation.

  I think the problem is that the xp (sp2) installation disk is oem and my office is a house build.
  Even if I put the sp3, its still the same.

  It is true that the oem versions will work on this PC manufacturers? It was initially provided with a laptop that is no longer used.

  Thank you

  Turns out to be a flakey bios; used a level between those listed above and it works now.
  P & P arises in life and my agp card has installed fine.
  I can now watch iplayer to my heart's content.

• Computer does not recognize sansa fuze

  I have my fuse sansa for over a year and no problems, but now I'm trying to plug it in (to add songs), but it shuts down and the computer does not recognize it. I formatted, but still once, nothing happened.

  What is going on?

  I am sure that is not the computer because it recognizes the other gadgets and souvenirs, memories, external drives, etc.

  Help, please! I'need to still have a few records in my rocket!

  Thank you.

  Have you tried another cable?

• Computer does not recognize my Sansa e260

  I run Windows 7 Home Premium. My MP3 player is a Sandisk Sansa e260.

  Normally, to charge the Sansa, I've just plug it into a USB port on the computer. It is immediately recognized and loading begins.

  Today, while I was out walking the dog, the Sansa ran out of juice. So when I got home I plugged the computer in the usual way. The computer does not know that it existed. It didn't start to load, it does not appear as a drive in Windows Explorer.

  I rebooted the computer with the trendy Sansa. No improvement. I ran "Find the hardware changes" on the USB entry in Device Manager. No change.

  I tried the Sansa in computer from Vista to my wife (who also accused there from time to time). Same result - the computer does not recognize the Sansa.

  Any ideas, please?

  Try performing a reset before you plug it into your computer to charge. There may be just enough juice left for this. You can usually squeeze a few more drops of a flat (any type) battery by heating slightly he. Maybe put it in your Pocket next to your body under a sweater for a while, or take it to bed with you. Your body heat to warm up gently.

  Now that old hat so to speak, press and hold the market/menu button while you count to 20. You can do it silently so the people around you do not think you have freaked out. OK, now, release the button and after a few seconds, press again to see if it boots up on its own. If so, place the cable of life support (Sansa) to quick before he dies again.

• Clip don't disconnect but Windows says that it does not recognize it?

  I loaded my Clip - when I pick up the computer, it shows that its connected and it will not power off - the screen which shows just its connected to the computer and fully charged, also when I plug it into the computer, I get a message that says: "one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it." and told me to try to reconnect the device.  I've updated the firmware.  I just bought this in September-Help!

  With the Sansa unplugged, press and hold power button for 20 seconds, then exit (Clip +), or slide the switch to the position and take it 20 seconds (Clip).

  Then try to turn on normally.

  If the video freezes, it is unable to properly communicate with the host computer in the USB bus.

  Bob

• WMP does not recognize the 3 different portable devices

  I have a new PC Win 7 with WMP. My PC DID recognize 3 different portable devices, when I connect (an iphone a plane mp3 iriver and Sandisk fuze mp3 player.) But WMP does not recognize everything, even if the PC is. I've tried different USB ports on the PC, makes no difference, other than that, all works fine USB ports. And I didn't look at using WMP, which does not seem to realize that this problem can exist, no info at all.

  How to make WMP to recognize so I can sync? And BTW, I'd like to go back to WMP in Vista, I'm bored of advanced tag editor.

  Thank you.

  When you write that the PC recognizes your devices, you got the popup that says that each device has its driver installed and it was ready for use or that you just want to say that you get another indication that the device is connected?

  What WMP version you have (click Help > about Windows Media Player; if you do not see the menu file/View/Play/tools/help, right-click at the top of WMP)?

  In general:

  • The iPhone requires iTunes to synchronize.
  • The mp3 player iRiver must have its firmware updated, which is perhaps not so easy to do (see the device in Device Manager or my computer?) --> http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/iriver-ifp890-mp3-cannot-find-driver/c28c30e1-3c9b-4446-b50a-cd884b3cd73e
  • The Sansa Fuze + player MP3 (if that's what you have) requires Windows Media Player 10 or newer.  See also http://kb.sandisk.com/app/answers/detail/a_id/42/session/L3NpZC8qc2g3eHFQag%3D%3D/sno/0 it is apparently quite sensitive to USB cables other than that which was supplied with the product.

• 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

  13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.