Problem scaling of the Windows user interface

Similar Questions

• "The logon user interface DLL failed to load athgina.dll. Contact your system administrator to replace the DLL or restore the original DLL. "was my initial problem.

  "The logon user interface DLL failed to load athgina.dll. Contact your system administrator to replace the DLL or restore the original DLL. "It's my original problem due to uninstallation of a Netgear usb internet device programthen a friend got their hands on it: now, put on it goes to safe mode selection screen. the result options of safe in many hyper scrolling mode that reads - multi (o) disc (o) partition (1) windowssystem32drivers\ ___sys... then stops & starts up etc when in last known good config that worked or start normally the icons of windows screen is displayed every thing seems as it should, then it turns a shade of blue just 1/2 a screen of white lettering & bam his judgment in a Flash. Cannot read this fast.      XP sp3 Toshiba Satellite P305

  Hi chygirl,

  You can follow the solution at the bottom of the link:-
  http://www.GeeksToGo.com/forum/topic/270656-cant-boot-up-after-unistall/

• Windows 8 going on the new user interface on the desktop.

  Windows 8 going on the new user interface on the desktop.  I don't want to do.  How can I prevent it from the new UI on the old desktop?

  I ran the install checker and it can and it works fine.

  I found the answer last night with the help of some very helpful tech support from Microsoft.  Find it, it was the touchpad driver.  It was an older version, and once that it has been updated the user interface seems to be 'don't call him underground mode.
  As I said, fine, but we'll see over time.
   

• How can I check my battery life in Windows 8 in the modern user interface?

  I recently bought a RT of Surface. While I check the battery via the icon (no numbers) displayed in the modern user interface (by lock screen or the menu of charm), I can't seem to find the life of battery exact (in numbers) in the modern user interface. Any help?

  OK, you want the straight hours? Go to your desktop (not your departure). If you do not know the difference at the beginning is with tiles. Stand on the right side which is your battery icon. If it does not show an icon, follow other users have said. When you scroll over it, it will tell you how many hours and minutes you still have a percentage. Right now, mine is at 1 h 16 min with 26% battery. You can click if you want as well and it will tell you the same thing but with options on how you can save battery

• Using ActiveX controls to the old user interface

  I tried to build a User Interface for TestStand 4.1.1 using LabView 8.6.1 (on Windows XP)

  However, ActiveX controls keep showing in the old non - 3d "block" style.

  

  This seems to be a problem when you build a new exe. If you use the included UI (Full Featured) in TestStand it appears correctly.

  

  I was able to replacte this problem on two other development systems (a new windows XP, LabVIEW 8.6.1 & TestStand 4.1.1 install).

  (1) take a copy of the full-functional UI of LabVIEW.

  (2) open the project file

  (3) rebuild the exe file

  It's only a problem when you use the exe file. When you run from the LabVIEW development system it looks good.

  Hi Simon,.

  For your UI to take on XP
  Theme controls, you will need to place a manifest file that specifies the activex control topics in the same
  directory as your executable file. TestStand comes with a manifest file for
  INTERFACE c# you can also use for the UI of LabVIEW. Just go to the \User Interfaces\Simple\CSharp and copy the file TestExec.exe.manifest in the directory of the LabVIEW User Interface executables.

  Note that the manifest file must have the same name as your executable file LabVIEW UI. For example, if you name your user interface, "MyCustomTSUI.exe", you will need to name the manifest file 'MyCustomTSUI.exe.manifest '.

  Please let me know if this solves your problem or if you have other questions. Thank you!

• The logon User Interface DLL Masgina.dll failed to load?

  Hello

  My name is Shelley, I really honestly do nothing about computers and my computer at home, which is a dell with windows xp pro.   was working fine, then 1 morning I rose and ithad a blue screen with the message about it.

  The logon User Interface DLL msgina.dll failed to load.  Contact your system administrator to replace the DLL or restore the original DLL.         then she had a reset button to push.  When I pressed the button, the display cover Dell and then he showed the sreen of coverage of Microsoft Windows XP, then he can go right the message telling me that. The User Interface DLL failed.

  Now, my computer has been sitting there for 2 weeks, and no one can use it.  Now, I'm on my cell phone the school for 17 years.

  What should I take my computer in a store or is - something simple, maybe, I can do myself?

  OH and if you know, the computer is at my daughters school, they have gave to her, because she had really great classes and she's in schools IB program, so they gave him a computer to have at home, it is set up for academic use, I know not whether that counts or not.  She got a new laptop for Christmas. Other people in the House are now using the computer to play games and watch videos from YouTube.

  Can someone help me?   Thank you, Shelley

  Hello

  ·        You're able to boot in safe mode?

  ·        Remember to make changes to the system?

  Method 1:

  If you are able to boot into safe mode then I suggest to do a system restore to a previous point when the system worked very well and check.

  Step 1:

  I suggest to start in safe mode and check if the problem persists.

  a. restart the system and keep tapping F8 until you reach the start menu.

  b. Select safe mode from the list and press ENTER.

  Step 2:

  I suggest you do a system restore and check. Follow the steps mentioned in the article below.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  I suggest you to consult the article below.

  "Logon user DLL Msgina.dll failed to load Interface" error after you have installed the MS04-003 security update

  http://support.Microsoft.com/kb/836683

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Disappears on the screen during the research on the modern user interface

  Original title: questions on screen keyboard

  I have a problem of access to keyboard on screen when using specific features of Windows 8. The problem only occurs with my desktop PC, I also have a Surface Pro 3 without any problems. The problem is that whenever I search for something, either in the charms on the right shortcut window drag the keyboard screen on just disappears and cannot be reopened until I have cancel the search. Same thing in fashion Metro/modern, while searching for an app. However the problem does not seem to influence the research done in desktop mode in the my PC popup.

  The Office I mainly use as a media center device for watching videos in different rooms when the office is physically. I can still use a physical keyboard to use searches, but sometimes my keyboard is not right next to me, while my mouse is always next to my hand. I found it faster to just short-circuit the keyboard input with the keyboard screen on when I browse the web. I know that the function should work because I do it all the time with my surface. Even with my keyboard attached to the surface, if I folded it with the kickstand on the back of the keyboard or just manually, click on the button of keyboard on screen with the keyboard typing normal position I can always get the screen keyboard works without any problem. I checked also with just my regular Asus laptop and who has the same problem as the office. This isn't really a problem with the laptop even if, as it is a standard design where the keyboard is not move or come off. Anyone has any ideas, it could be the cause? Thanks in advance to anyone who responds

  Hi Will,

  Welcome to the Microsoft community.

  • Using the screen keyboard or touch screen?

  There are two types of virtual keyboards on Windows 8, on-screen keyboard and touchpad. You may experience this problem if you are using a touchscreen keyboard on the task bar. We have checked this on our computer of Windows 8 and its default value of design.

  If you use the screen keyboard and the keyboard should not disappear if you use it in the modern user interface. Please confirm what virtual keyboard you use to help you also.

  You can read this article and check if it helps:

  How to use the touch keyboard

  http://Windows.Microsoft.com/en-us/Windows-8/using-touch-keyboard

   

  Use the keyboard to the screen (OSK) to type

  http://Windows.Microsoft.com/en-us/Windows-8/type-with-the-on-screen-keyboard

   

  Hope this information helps. If you need help with Windows, let us know and will be happy to help you.

• The August 2012 calendar items are not available in the calendar of the modern user interface application

  The August 2012 calendar items are not available in the calendar of the modern user interface application.  They are available through a web browser and the application MS Office Outlook.  Y at - it a setting or another way to access old calendar items in the modern user interface.  The phone application has the same problem.

  Original title: elements of August 2012 calendar

  Hello

  I suggest for the link and run the troubleshooting utility Apps and follow the other steps in the article:

  What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-in/Windows-8/what-troubleshoot-problems-app

  See also:

  Application of calendar for Windows: FAQ

  http://Windows.Microsoft.com/en-in/Windows-8/calendar-FAQ

  Stay in touch with email and calendar

  http://Windows.Microsoft.com/en-us/Windows-8/mail-calendar#1TC=T1

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• After update of firefox mobile, I found that the modified user interface, is there a way to push back on mobile?

  I decided to update my firefox for android fotvthe flash support, but when I did I found the interface changed, now I want to go back, but unlike in I can't find older program versions for the desktop version.
  also, I should mention the problem of text entry that showd this version where the cursor is at the beginning of the first line to the place where im typing.

  Hello

  It is not an option for the old user interface on the new version, but you can get older versions here:
  https://FTP.Mozilla.org/pub/mozilla.org/Mobile/releases/
  But, we don't recommend that you use the old version because they are insecure, so take that into account if you decide to restore.

  For the text of entry question, can you tell me the brand and model of your device and if you use a special keyboard on any?

  Thank you!
  Michelle

• I have the new apple TV, and he had the new user interface.  Friday he returned to the old version of apple TV user interface.  Anyone know why this could have happened

  This is a silly question, but I'm not too tech savvy.  I don't know I have changed something somewhere.  I have the new Apple TV, and he had the new user interface, which means that the appearance of the applications using the applications, example, scroll down to Netflix, Netflix, etc. to research.  This weekend he returned to the UI I've seen on my old Apple TV. Does anyone know why this could have happened and how I me the new interface to return?  I did a reset to the original values Apple TV and it did not work.  The tvOS is 9.1 (13U85).

  Try to understand the issue.

  Do you mean that you have an apple tv4, but he has a home screen display from the older ATV 2/3?  You can attach a screenshot?

  I have never heard of it and don't know how it is possible that they run entirely new software on the ATV4...

• How to run the Manager user interface programmatically

  I am looking for a method to run programmatically (from Labview), the Manager user interface, and then to connect it.

  Is there an API from .net to who?

  Thank you

  Note: I developed for earlier versions of VeriStand, a high-level application that manages projects of test benches and their versions. I want to update with the new manager of the user VeriStand interface.

  It is not a .NET API to control UI Manager, but there are some command line utilities, you can use to launch the user interface Manager, open a specific project, specify the IP address of the gateway to use and connect automatically.

  Try the following command line arguments:

  /nivsprj 'c:\project.nivsprj' Gateway localhost / connect

  They are documented in the online profile of Stimulus help editor.

• Problem connecting to the Windows error reporting service

  Whenever I try to check for solutions in the Windows 7 Action Center, I get the following error message: problem connecting to the Windows error reporting service. Some of the reports can not be uploaded to the Windows error reporting service. Please try again later.

  This problem began to appear a few days ago, even if I did not any changes to my computer. I do not have any firewall (with the exception of the default Windows Firewall) and all my other programs work very well on the Internet.

  Any ideas what could cause the problem?

  Problem solved.

  I actually had to purge all existing reports by using the disk cleanup utility.

• How to recover the active user interface objects on a screen?

  Hello

  Is it possible to recover all of the active user interface objects on a screen?

  I found ago api like net.rim.device.api.ui.Screen.getFieldWithFocus, but how to get sound type of subclass as ButtonField or BitmapField?

  another take:

  If you retrieve the field with focus, you can check what type of field you have recovered (using instanceof, for example)

• Getting error messgae"problem connecting to the Windows Error Reporting Service. Please try again later! "when you use the error report feature

  Original title: error report function

  When I use the error report feature a warning appears "problem connecting to the Windows Error Reporting Service. Please try again later! »

  It started some time ago and I have plenty of backup errors.

  Using W7

  Hi John,.

  I suggest running Disk Cleanup and selecting Remove all the Windows Error Reporting log files by selecting the checkbox and then click OK:
  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup
  Check if you are then able to start the Windows Error Reporting Service.

• Is it possible to several user interface screens to manage in the only user interface project in oracle BPM...

  Hi Experts,

  In my process I use multitask user regarding my needs. Now, I need to create screens of the user interface to the user of the task. Is it possible to several user interface screens to manage in the only user interface project in oracle BPM... Please let me know if you have an idea

  .

  Thanks and greetings

  Charm_Narra

  http://youtu.be/bpVVpDJLE1o   This video explains how to ensure that the UIS of multiple human tasks in a single project ADF.

  Dan