Problem setting time in DateTimePicker

Similar Questions

• Problem setting time composition in a few minutes

  So I went in my composition settings, and I want to change the duration in minutes, but when I try to enter 1... (minutes) or 1... (Time) and tab through it changes to 00001. It doesn't seem to matter how much I get AE automatically back it to executives, why I can not enter 10 minutes or 20 minutes?

  I had a quick glance in the preferences but can't seem to find something that can solve this problem.

  Tried to send print but get an error message "error Code: object does not support property or method"createContextualFragment '"

  So frustrating... Please help!

  you see the images. CTRL-click on the counter and it will change time code.

• AirPort Extreme - set time zone

  Greetings:

  I have seen a lot of traffic on the change of the parameter of time zone in an AirPort Extreme, but I can't find an answer.  It seems that it may be impossible.  There is debate if even a hard reset of the device clears the set time zone and allow it to be reset.  It also seems to be no access to the device to terminal implemented a manual correction.

  I left US mountain for the Eastern US time zone time zone.  I have an AirPort Extreme running firmware version 7.6.7 and use version 6.3.6 AirPort Utility.  My AirPort Extreme needs to operate in bridge, because of the way the Internet is provided by our service.  I use the 'access control Timed"to limit the time that my young children are able to access the Internet.

  It should be a simple matter to define the time zone of my AirPort Extreme to my current location (or so it should automatically and reliably).  I don't know if the bridge mode interferes with the ability of the device to find its time zone.

  Can anyone offer advice (other than to apply an offset from my control access timed two hours time difference)?  Can the Genius Bar at my local store to fix?

  Thank you in advance,

  WILX

  Unfortunately, Apple has removed a number of parameters that they feel that the users do not need. Setting the time is one of them.

  Finally, your airport will have the exact time, but it usually takes about 6 weeks for that to happen.  Until then, you will need to manually adjust the access delay settings to compensate for.  When the time of the correction is made, then you have to adjust again timed access.

  We have seen some reports from users who claim that resetting the airport to return to the default settings and then setting them up again will fix the issue of the time, but it has not always worked when I tried it.

  If the 'genius' can solve this problem quickly, then he won the title.

• Problem of time zone: time zone is not consistent

  Problem of time zone: time zone is not consistent
  From sqlplus, the time is displayed:

  SQL> SELECT SYSDATE FROM DUAL;
  
  SYSDATE
  --------
  09-11-11

  from the Windows command line tool:

  D:\coherence\lib>DATE
  The current date is: 11/11/2009
  Enter the new date: (dd-mm-yy)

  But from the Control Panel, it shows at the present time is 10:40.
  For this reason, a database of programs don normally work.

  There are two ways that you could do.
  Track 1:
  Search for a file by the name "glogin.sql" on your client workstation and add the following statement

  alter session set nls_date_format = 'YYYY-MM-DD HH24:MI:SS';
  

  Make sure that you save the file. This change will apply to all users who will connect to the database using SQL * PLUS to your machine.

  Track 2:
  Create a shortcut and place it somewhere (for example on the "DESKTOP").
  Right-click on the shortcut and choose Properties.
  The text corresponding to the box 'Start' to reflect the current location of the shortcut.
  Create a file by the name "login.sql" and place it in the same folder that the shortcut.
  Edit the file and add the following line.

  alter session set nls_date_format = 'YYYY-MM-DD HH24:MI:SS';
  

  Make sure that you save the file.
  When you double-click the shortcut to launch SQL * more and opening of the session, the "login.sql" script is executed.

• Cannot set time

  I live in California, but was recently in the United Kingdom. When I was there, my time adjusted automatically based on my location. When I got home, he did not but remained at the time of the United Kingdom. So I'm going to date and time and select my current location and time to set automatically. But it keeps things 8 hrs in advance. So, I change manually. And I see that anything that I set the time for, it shifts the time of the device of 8 hours. So in order to get the local time in Cali, I put 8 hours behind.

  Amy idea what is happening?

  Hello. Check your setting time zone under settings > general > Date & time.

• Problem of time synchronization in the HP b2600 workstation.

  We have three Hp b2600 named rop11, rop12, rop13.

  rop11 is active and rop12 is passive and rop13 is autonomous.

  ROP's time synchronized with the GPS clock. But we face a problem of time synchronization.

  As we sychnisied a day after we saw a drift of about 10 seconds in rop11 and 1-2 second in rop12 & rop13.

  ntpq shows according to the attached file.

  TW file attached, one is Parallet1 where the existence of the problem and another is PArrallel2 where its not working OK.

  PL. suggest the cause and cure.

  Thank you

  Rajiv Garg

  Mr President.

  All the vause zero in Parallel1.doc comapring and PAralle2.doc, which indicates how to initialize the same.

  Rajiv gelin

• How to set time on windows XP users

  Hello

  I'm friends with a school of ICT club and they allow then to use the computer and the teacher asked me to set time limits and block cookies or classified sites, how can I do?
  Thank you
  If you like to talk to me e-mail * address email is removed from the privacy *.
  and I will answer to as soon as I can.

  No response email within these forums.  Communication is through the forum only... so everyone can benefit.

  If all the student accounts are limited user accounts, you can use the command net use from a command prompt in a password "administrator account on the computer.

  See
  http://en.kioskea.NET/FAQ/2228-set-a-time-limit-when-using-a-PC
  http://www.exnol.com/parental-control-user-login-time-Windows-XP
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/net_user.mspx?mfr=true

  If students have a level of sophistication of the computer, however, it is likely they know - or quickly - learn how to get around this restriction.

  So, too, is "Access Manager" built into Internet Explorer.  See, for example,
  http://www.Windows-Help-Central.com/parental-controls-in-Windows-XP.html

  I suggest rather than relying on these tools, you must use your favorite search engine to search for "parental control software".  If you can find the reviews of real people (rather than a site "software top ten '), who would be the best.

• Problem Set - up blackBerry Smartphones Email

  Hey guys,.

  I'm having a problem setting up my accounts e-mail and access to internet on my 8830 Verizon Wireless.  Sorry I'm kinda a n00b this is my first blackberry.  Thus, everytime I try to put something it says I have to create a blackberry account which is fine and dandy, but it won't let me because it says that my PIN is already activated, now I buy this phone.  How can I do accept my new account and letme registry?

  I will also upgrade the operating system on it (even if my thinkpad comes to die what numbers) which version of desktop software works best?

  Good so I called Verizon and they were confused at first but after being on the phone for a while with a very useful technology, they understood him out and set up my email for me.  It turns out that I have to use the user name that is already registered on the phone, so the guy that I bought username.  They wiped out its old email (I hope, you just don't lose all your emails wherever you are) accounts and set mine to and let me change the password.  Everything works now, just waiting to get my thinkpad broke stupid of the STI in order to update and sync with my outlook calendar.

• I have a problem with time limits in Parental control.

  Original title: Parental controls: time/blocks. How it works once defined?

  I just put a few times on our computer that I DON'T want my child to be on the computer.  If my child is connected when the window of blocked time arrives, what happens?  It hits them?  Only apply it is able to connect at this time?  Will get a warning that they're about to be disconnected?

  Hi trossk,

  You can set time limits to control when children are allowed to log on to the computer. Time limits prevent children to connect during the specified hours. You can set the hours of different logon for each day of the week. If they are connected end their time, they will be automatically disconnected. For more information, see control when children can use the computer.

  Reference:

  What can I control with Parental controls?

  http://Windows.Microsoft.com/en-us/Windows7/what-can-i-control-with-parental-controls

  Choose which games children can play

  http://Windows.Microsoft.com/en-us/Windows7/choose-which-games-children-can-play

  Video: Use Parental controls

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/using-parental-controls

  Hope this information helps. Get back to us if you have more queries about Windows.

• How to set time? HP Officejet Pro 8600 more.

  How to set time? HP Officejet Pro 8600 more.

  Hello Marie Therese.

  In the Tools section of the Control Panel, you can edit the fields in time at your convenience.

  I hope this helps!

• Issue of globalization - Set time zone

  Hello

  Depending on the condition, I put globalization attribute value from the Local time zone to Yes. But now, every time a user connects it gets 'Set Time Zone' on the screen. When he clicks on it. the time zone is set to 0.00.

  If the user does not click, the local time zone browser is correctly retrieved.

  Question: Can I hide this hyperlink that comes after the connection?

  Thank you

  You must to_char date. For example, in a SELECT statement, I use:

  my_date to_char (FROM_TZ (CAST (date_column AS TIMESTAMP), "America/New_York") to the LOCAL, ' Dy month ddth aaaa hh24:mi:ss ")

  New York being the database time zone I tested it on. A list of other time zones that you can use, depending on where your database, can be found here:

  http://docs.Oracle.com/CD/B28359_01/server.111/b28298/applocaledata.htm#NLSPG0141

• Lance Muse problems, every time I launch Muse, it crashes, I have re-installed twice with without success.

  Lance Muse problems, every time I launch Muse, it crashes, I have re-installed twice with without success.

  Hello

  It might be because of permissions. If you are on a MAC, you can give permissions ' read & write ' to everyone on the following folders: -.

  (1) ~/Library/Application support/Adobe

  (2) / Library/Application Support/Adobe

  ~/Library/preferences/Adobe 3)

  On a windows machine, please give all permissions for all on: -.

  (1) C:/Program Files(x86) /Adobe

  Files(x86) /Common 2) C:/Program Files/Adobe

  Kind regards

  Neha

• 11g AW set time

  Hi all
  
  I tried to find what effects AW set time. We are currently on 10g and we have three analytic workspaces each around 9 dimensions and 6 cubes. Main data cubes are sized in 6 sizes and this is the maximum size of any cube in AW. When I ask the first time after I opened the connection to the database, response times are of the order of 20 to 25 seconds for two AWS and 45-60 seconds for an AW. After my initial query response times are less than 1 sec.
  
  We are currently in the process of upgrading to 11 g. Our first tests on aw set time almost resemble 10g. I tried to find my session with the following code to see where he spent most of the time.
  
  Start
  DBMS_AW. EXECUTE ('AW JOIN RO < AW_NAME >');
  end;
  
  Response time
  Start time: 2011-02-02 09:14:39.443
  End time: 2011-02-02 09:15:00.127 (it took nearly 21 seconds to fix even without querying any data)
  
  The trace file shows during reach it crosses my model (dimensions and cubes) display objects and also views that AWM creates automatically for each dimension and cube. So that means if I most objects in the view of my model then my set time will be higher?
  
  
  Another question I have is in 10g that fix all my AWs times are not uniform. Is the number of partitions in the cube has any effect to attach some time?
  
  
  Is there anything I can do to minimize tie them time in 11g we report through the web and the first query time, response time seems unacceptable?
  
  OLAP Version: 11.2.0.1
  AWM version: 11.2.0.1
  
  Thank you
  
  Published by: user3953230 on February 2, 2011 13:27

  The consensus among developers is that any number of partitions, not their content. Let us know if you find it is the case.

• Problem setting transition duration first pro cs4. Is this a bug?

  Hello world

  I have made a project of first pro cs4 and I'm having problems setting the duration of transitions between clips. I have my default transion set to cross dissolve them and 15 frames in length. When I try to lengthen, it seems that first makes two transitions in instead of a longer one. So, if for example I got a clip with a dip to black when I extend more than 15 default images to say 30 images I get two separate transitions one after the other instead of a long. I know it's difficult to understand so I downloaded the video on youtube. If fast forward you to the minute 01:20, you will see the latest bland given away with a dip to black transition and the you'll be right flash a bit after the last light disappears. I hope someone can help me solve this problem, as I'm completaly lost. Thank you :-)

  Work waaay too hard at this, dude.  Just use the default chained.  It gives you good fade to the top using all 24 images, no adjustment necessary.

• Problem of time setting Date DateField

  Hello.  I know I posted simillar in the past but now encounter the problem with what I think is linked to time zone.

  When I use the following code to set the time and date in a DateField leave a string I get the inconsitent results...

  DateFormat df = new SimpleDateFormat ("YYYY/MM/dd HH: mm");
  java.util.Calendar d2 = java.util.Calendar.getInstance (TimeZone.getDefault ());
  String date = ' 11/11/2011-14:11.
  yy int = 0, mm = 0, SD = 0, h = 0, e = 0;
  mm = Integer.parseInt (date.substring (0, 2)) - 1; January = 0
  DD = Integer.parseInt (date.substring (3, 5));
  YY = Integer.parseInt (date.substring (6, 10));
  HR = Integer.parseInt (date.substring (11,13));
  MI = Integer.parseInt (date.substring (14.16));
  D2. Set (Calendar.YEAR, AA);
  D2. Set (Calendar.MONTH, mm);
  D2. Set (Calendar.DATE, dd);
  D2. Set (Calendar.HOUR, human resources);
  D2. Set (Calendar.MINUTE, mi);
  D2. Set (Calendar.SECOND, 00);
  D2. Set (Calendar.MILLISECOND, 00);
  D2.setTimeZone (TimeZone.GetDefault ());
  long t2 = d2.getTime () .getTime ();
  _dateField = new DateField ("", t2, df);
  Add (_dateField);

  So will string ' 11/11/2011-14:11 ' to the datefield causes the time spend at 2010-11-12 02:11.  I've set the default calendar time zone doe.  Not sure why this is now occurring.

  Ah my bad, given the first bit and skips the rest! It is possible that you are using the TIME instead of HOUR_OF_DAY