Electrify: Ext SD Card
I have looked in other air but don't see how to get programs to use the ext sd card. Most great on for me is the tape recorder. I need to be able to record my recordings on the ext sd card, as some of my recordings will almost 2 hours in wav format so that they are easy to play anyware.
On a different note, this phone is awesome. The signal for data and wifi reception is unreal it beats any phone I have ever owned.
The developer can fix the problem by using the following document.
Mark
Support Forums Manager
Tags: Motorola Phones
Similar Questions
-
Problems with video files on 8 gb microSDHC
to understand my problem, you should first read the following problem.
[thread quote: http://forums.sandisk.com/sansa/board/message?board.id=sansafuse&thread.id=5849]
Incompatibility issue with technology Kingston 8 GB microSDHC memory card and playing video files. ASIN: B001CQT0X4 SDC4 / 8GB
I recently bought a Kingston 8 GB microSDHC card on Amazon.com technology for my 8gig Sansa Fuze (the 1.01.15 firmware version). I formatted the card while it was plugged into my rocket through Windows XP. Charge of some songs and a video file to the ext memory card.
During playback the video has been dried then blocking at least one minute, causing the fuse to be reset. The music seemed however read (even if I don't concentrate on the test of music files). I worked with Amazon to replace the card with another card of 8 GB of Kingston, and had exactly the same problem.
[/ quote]
I have the same problems with a platinum 8 GB class 4 microSDHC card. Now I formatted the card in fat32 and the problem seems to be resolved.
It will be easier to mention what memory cards can be used in the rocket.
Hi all,
I want only to inform you:
Now, I found a memory of 1 GB SanDisk microSD Card in my collection of memory card. I copied the two films on this subject, put it in my works fine fuze and als. Now I'm looking for a microSD SanDisk 8 GB SDHC memory Card, which is not so large.
After that I changed the card memory, I will report.
Good day
-
Converting WTV files...
Folks, Win7 recorded television shows in this WTV format and has a built-in tool to convert them to format dvr - ms I use PS3 Media Server and it does not yet recognize WTV so I have to convert. The problem is, WTV Converter that comes with Win7 starts the conversion process and dies off the coast after you convert like 5-6 minutes of the show. How can I diagnose this problem? This would cause a codec pack? Better yet, is there an AC converter for WTV in what?
Thanks in advance... SEMPER VIPER / army strong!
I use Roxio... Easy Media Creator 10 (more)... of 2007.there a newer version called Roxio 2010.
Go online and watch this product for your type of file - conversion of the requirements...
I also use a card to external acquisition... called the::PYRO A / V Link... API-558-EFS reference...
I usually... Use this for my VCR.tapes/and to convert it to AVI via a Firewire cable... ANALOG-IN/firewire-OUT.
Or... It's the connection to my camcorder... FireWire-/ Firewire OUTPUT.
===
What your PS3 uses for output connections... ??
PYRO A / V Link allows you to use connector RCA... R & L (audio)... more than the yellow connector (vid)...
It accepts an S-video input...
.. and a Firewire input...
===
Next... its Roxio CAPTURE TOOL... and a choice of MPEG-2 or AVI... the call of the ext Capture card... an AVI-in line-device...<--same a="">--same>
===
I think it would answer several questions on a uplink - in the video... capture card costs about 130-dollars...
===
I might add... a camcorder creates a DV file... and is fully compatible with the AVI file...
The VCR-tape... However is not a big file... you get a quality VCR (VHS) project...
You must understand the video files... size, 480.720 x 640 x 480 frame... otherwise you might get poor results...
I use a camcorder so its never a problem... whereas a VHS (VCR)... Well it's just not a big project...
Details on this file to the PS3... before you buy. -
Copy paste on card SD Ext in 4.4.2?
Hello:
I have a laptop 14 Slatebook Android...
And just tonight, I downloaded and installed the 4.4.2 Update Kit Kat.
Everything works GREAT and I was very surprised to receive this update so quickly because it is a new piece of hardware for HP.
But my question is this.
Google has made it impossible to save, copy or paste anything to my external SD card.
It is said currently 4.4.2 does not allow these actions by applications "THIRD PARTY", but I can do these things to an external Usb key.
That's really not that Big a deal by using a Usb key, I'm not moving that much of my laptop, "BUT" he does a lot of try if I could use my card instead of a Usb Stick all the time...
My question is the following is there any Application on Store that will allow me to do this using my external SD card?
Or in any case around her period?
I think it's a sort of 'STUPID' for Google to take this big step backward is the ability of users to use their Android devices.
I know that's not HP fault but only Google and Google...
HP has done a "GREAT job once more...".
Any help, I am most grateful. Ricky
Hello
In my view, that there is an application on your machine calld HP File Manager. It works very similar to Windows Explorer or file Explorer.
Kind regards.
-
EliteBook 8760W: possibilities to upgrade graphics card
I currently have 8 gig RAM and graphics AMD over-pants M5950. About to upgrade to 16 gig which is max for this (Intel Core i7-2630QM @ 2.00 GHz) processor. "While I'm here why not upgrade the graphics card?" he asked. The notewbook is 4.5 years. So, here's my question. What might work for a new graphics card? Thanks in advance.
We usually say to people flat out "no upgrade is possible". In your case, not true. You already have a good map. However, the other candidate is the nVidia Quadro 5010 M which is a beast with 4 GB of memory video memory DDR5.
http://www.notebookcheck.NET/NVIDIA-Quadro-5010M.47195.0.html
Here is the Service Manual:
http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c02847569-1.PDF
See p. 68 to see how the video card comes out.
If you switch to nVidia, you also get a different fan/radiator for the video card:
Intended only for computers models NVIDIA graphics subsystems 652544-001
Your video card can be bought on eBay for under $ 60, while the Quadro 5010 M costs more than $600 in order to see how much more desirable is the Quadro. You can also search other AMD/ATI cards that are not specified in the maintenance manual, but it's very hit or miss. On the some portable (removable) MXM cards with, they are not universally interchangeable. There are Web sites for only MXM card information and you can see one of them:
http://forums.laptopvideo2go.com/Forum/67-official-MXM-upgradecom-Forum/
As you can see this isn't really a trivial question and must consider and plan carefully. Not just a "Hey while we're here we might as well" kind of thing.
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
-
Anyone used this card Sandisk U3 Ext.Pro UHS - 1 512 with the AX100 or the AX53?
I would like to use this card since the AX53 has no internal storage, and 2 hours on 4K (64 MB card) limit is fairly restrictive.
Thank you
m
Hi mikewinburn,
We cannot guarantee the functionality of this capacity of the card with the camera. But you can be sure that Sony has tested the cards of third parties such as SanDisk and proven that they work with our cameras. You can use cards with capacities larger than 64 GB, 128 GB and 256Go such as.
If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch
-
HP Elitebook 8540p: sim card
Hello
I want to activate the SIM on my elitebook 8540p, I puted the SIM on this place behinde the battery, but I do not know what kinde Nide program must be installed on my compioter.
On my HP 6540p, I have both Windows 7 (64-bit) and Ubuntu 16.04. that cane give me a solution for both systems?
Thenks very much.
Have you installed the software to mobile broadband of W7 and pilot for the WWAN card model you have?
http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=4095873&swLangOid=8&swEnvOid=4059
Found in the section network driver - you must either the Ericsson or the desert of Gobi of Qualcomm.
See also Chapter 2, page 21 benutzerhandbuch below for some general indications.
http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c02441315-1.PDF
As for the use of the large map Strip on the other operating system, unfortunately, I would not be able to offer suggestions for this.
-
I was wondering I can install any old wifi card in this?
As I want to upgrade to a Wireless N card
Hello:
Your mobile phone according to the specifications already has a Wireless N card any.
Here is the link to the service manual for your laptop.
http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c02030223-1.PDF
Network cards wireless supported with matching numbers of HP are in Chapter 3 on pp 25-27.
Because your model has an AMD processor and chipset, dual band N Wireless only card that works in your laptop is WIFI 802.11a/b/g/n Broadcom 4322 module.
You must select the reference number applicable to the part of the world you live.
You can usually find one of these cards very low cost on eBay by questioning by the HP part only number.
If you try to install all the other wireless cards, but those listed in the manual of the laptop does not start upward.
You also get one with the part number HP on it or it won't work.
-
HP Probook 6550 b: Hp 6550 b graphics card
Hello, I have a Hp Probook 6550 b , and I want to update my graphics so I can to upgrade this laptop graphic card and made this laptop support external graphics card? And if yes well want their name too.
Concerning
Rizwan Jamil
RizwanJamill wrote:
Hello, I have a Hp Probook 6550 b , and I want to update my graphics so I can to upgrade this laptop graphic card and made this laptop support external graphics card? And if yes well want their name too.
Concerning
Rizwan Jamil
Looks like as just as it is the onboard video and if you want more graphics, you will need to change the Board of Directors to do so. And video ext won't do better. Also, that only comes in two video AMD and nothing more.
ATI Mobility Radeon™ HD 4250 is highest, this Council is going to based on the service manual...
http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c03471180-1.PDF
-
To access the/sdcard-ext applications that allow only access /sdcard or/mnt/sdcard
Hello...
I use a few applications that are their resources in the SD card, but I like to store my files in the external SD card. I am a user coming from the Samsung Captivate, so he has never been a problem for me, because the Samsung phones access the external sdcard using a symbolic link from the inside of the internal sdcard, do something like
/ sdcard/external_sd
But with the Atrix is completely different since the mount points are
/ mnt/sdcard and it is a symbolic link to /sdcard
And the external SD card is
/ mnt/sdcard-ext with a symbolic link to/sdcard-ext
Is there a workaround to achieve what I have to do? In my view, it is not possible to create a symbolic link because of the file system used in the SD card, but I could be wrong.
Am I missing something here?
Thank you very much
-
HP ProBook 6460 b: HP ProBook 6460 b WiFi card
Hi guys,.
I bought a double router broadband and just when I thought that I had everything figured on how to use all the features of my new router Asus AC56U I came to realize I forgot the essential - I have not 5 GHz receiving the Wi - fi card in my HP ProBook 6460 b.
Next thing I discovered, it is who is locked with whitelist do not use what you like and replace stuff if you need to.
My question is - what dualband WiFi card buy to put in my laptop because I can not find the whitelist and it is updated (there should be an update).
I upgraded my possible the most recent BIOS version on the site of HP (it was something like April 2014) so I should have the last update in the white list.
Any information would be much appreciated.
Thanks in advance!
Best regards
CasualUser
Hello
Please see the following document:
http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c03253774-1.PDF
Another option: allow your router to strip double diffusion. I have to use this way of as many of my machines (and little wireless printers) may see as 2.4 GHz.
Kind regards.
-
HP Pavilion 15-e084c: multiformat card reader
Hello:
I have a laptop HP Pavilion 15.6 inch screen (15-e084ca), AMD Quad Core A10 - 5750M and 8650 Radeon graphics card, 1 TB hard drive, 8 MB of SDRAM DDR3, Windows 64 - bit 8.1.
I would like to know if the card reader accepts the Sony Memory Stick Pro Duo card.
Thank you.
laptop_user wrote:
Hello:
I have a laptop HP Pavilion 15.6 inch screen (15-e084ca), AMD Quad Core A10 - 5750M and 8650 Radeon graphics card, 1 TB hard drive, 8 MB of SDRAM DDR3, Windows 64 - bit 8.1.
I would like to know if the card reader accepts the Sony Memory Stick Pro Duo card.
Thank you.
Most are stand SD card format not Sony that will require you to use an ext USB memory card port adapter to read the Sony card.
-
Hello
Configuration of a new C240 and I noticed there is another option in the config MMIC page called "Shared LOM Ext. Reading guides, this seems to suggest that I can share access to the administration of the CICM with one of the LOM standard and also the Cisco co..
I am so installed VMware on the server and configured LOM 1 x and 1 x interface VIC for the management of VMware using Active / Passive. This works very well for VMware management, but when I disconnect the LOM I lose connection to the MMIC.
So it seems that I have wrong MMIC can be configured like that or I'm missing something. Any ideas?
Thank you
Russell
Hello Russell,
I think that "Shared extended LOM' feature is available when we Cisco VIC that NCSI map interface.
Extended shared LOM
Any LOM port or adapter card can be used to access the MMIC. The Cisco card must be installed in a housing with the support of NCSI.
Padma
-
mutual authentication failed in the emv card.
I try to send the STORE_Data command on my EMV card to store values of the IMB. Here, I got a document that describes the APDU command to install and customize the application EMV on JCOP 2.4.1 revision 3.
Here, in the document, command sequence is similar-
SELECT INITIALIZE UPDATE EXTERNAL AUTHENTICATION STORE DATA FOR DGI ... ... STORE DATA FOR DGI.
Line written in this Document is - "securitythe key value of the issuer field (encryption, MAC and key encryption key): 404142434445464748494a4b4c4d4e4f." and the value of the sequence counter 0
I just downloaded GPSHELL 1.4.4 and try to run the following script:-
mode_211 enable_trace establish_context card_connect select -AID A000000003000000 open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4f -enc_key 404142434445464748494a4b4c4d4e4f // Open secure channel card_disconnect release_context
and I got the output as:
D:\users\Amitp\My Documents\Downloads\GPShell-1.4.4\GPShell-1.4.4>GPShell.exe he lloInstalll.txt mode_211 enable_trace establish_context card_connect select -AID A000000003000000 Command --> 00A4040008A000000003000000 Wrapped command --> 00A4040008A000000003000000 Response <-- 6F658408A000000003000000A5599F6501FF9F6E06479100783300734A06072A864 886FC6B01600C060A2A864886FC6B02020101630906072A864886FC6B03640B06092A864886FC6B0 40215650B06092B8510864864020103660C060A2B060104012A026E01029000 open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4 f -enc_key 404142434445464748494a4b4c4d4e4f // Open secure channel Command --> 80CA006600 Wrapped command --> 80CA006600 Response <-- 664C734A06072A864886FC6B01600C060A2A864886FC6B02020101630906072A864 886FC6B03640B06092A864886FC6B040215650B06092B8510864864020103660C060A2B060104012 A026E01029000 Command --> 8050000008FB3EE9FE0812ABFF00 Wrapped command --> 8050000008FB3EE9FE0812ABFF00 Response <-- 0000322000186396921901020000CEBCF3A2D47130C736B6480E4DD59000 mutual_authentication() returns 0x80302000 (The verification of the card cryptog ram failed.)
Why is this authentication failed here? To send the command to store I must past this control. any suggestion / idea help me out of this error.
Thanks in advance...
I can reproduce the cryptogram of the map with my tool
KeyDiv : 00 00 32 20 00 18 63 96 92 19 KeyInfo : 01 02 SequenceCounter: 00 03
CardChallenge: 70 73 2 c F3 B5 DB
CardCryptogram: 77 3B 2D 91 35 F6 ED B4
Last 6 bytes of KEYDATA: 00 18 63 96 92 19
Entrance to the triple of the 18 ECB:00 63 96 92 19 02 00 18 63 96 92 19 0F 02 F0
generated kmac: 63 59 D2 9 63 B8 6 b 1 91 68 F4 3 C 4 b 27 F6 AD to
Last 6 bytes of KEYDATA: 00 18 63 96 92 19
Entrance to the triple of the 18 ECB:00 63 96 92 19 F0 01 00 18 63 96 92 19 0F 01
generated kenc: 11 CB 6 b 70 AB E0 5F B1 23 D6 22 88 38 EB 3A E1
Last 6 bytes of KEYDATA: 00 18 63 96 92 19
Entrance to the triple of the 18 ECB:00 63 96 92 19 03 00 18 63 96 92 19 03 0F F0
generated ENCs: 21 DC A5 B4 b 21 17 47 72 02 77 4, 58 F3 EB 6 b 8,
Session CNTC: 6a B9 66 F2 B2 8F 11 49 31 FE 5F 77 04 0E B4 A5
Session of the CCMC: C4 F0 42 64 F4 BD 2 8 BEING 52 06 1st FF 1 has 00 4F
Session RMAC: F7 2 b 72 74 and 74 82 15 6 73 67 05 E6 52 17 B6 E5
Session ENCS: E3 90 86 E6 F8 8F 58 BB D0 77 A2 0E 0E CF 9 d B2
Calculated Card Crypto: 77 3B 2D 91 35 F6 ED B4
Now ext authenticate.
Cryptogram of the calculated host: FD 89 A6 AB 1 b 6 06 E1
APDU to wrap: 80 82 01 00 08 FD 89 A6 AB 1 b 6 06 E1
Your cryptogram of the host is very GOOD, but the MAC is not!
The cryptogram is done with Kenc
the MAC is made with Kmac
Here's how: this method can be used for any APDU after ext authenticate
block length: 3
Apdu using updated MAC calculation
entrance to the SCP02 C - mac calculation: 84 82 01 00 10 FD 89 A6 AB 1 b 6 06 80 00 00 E1
Ext-AUTH: 84 82 01 00 10 FD 89 A6 AB 1 b 6 06 AC 32 6 a 86 3 a DC C8 DF E1
I read your message:
- -------------------------------
- mac session key generation
- ------------------------------
- KENC: = DES3 (KMC) [00 18 63 96 92 19 02 F0] | DES3 (KMC) [00 18 63 96 92 19 0F 02]
- = 6359D29C63B86B1A 9168F43C4B27F6AD
I agree, the KMAC is correct, even if you named KENC
At this point, the ICV is zero
The mac algorithm is MAC final retail (single with final MAC of triples)
Make sure that you do not mix the key pieces to use for the only part OF THE, here, it should be C4 42 F0 64 F4 BD 2 8.
Also make sure that you calculated the MAC with the CCMC, not the MAC KEY DERIVED SESSION KEY because I think that you did!
-
How to load .cap on a smart card
Hello world!
I am very confused with java cards. I have written an applet for java card. Tried in Eclipse + JCWDE. Send a few APDU units with apdutool.bat. Works great!
However, I would like to go further and try on a real card chip. The only problem is that I don't know how to load on my card .cap file. I tried to find forums, references or something like that, but all I found was "trying to load, but get the error" or something like that.
I use the JCOP for Eclipse tool (if only for any help)
Can someone find works me of loading in princip? Is their any classes that can be used to simplify the task?
Any help is appreciated
/ LYes of course. Normal .zip file.
I can print the contents of the file load.jcsh here:# /set-var path d:/Wi-Fi/javacard/download/eappsk32k #Switch trace mode on and connect to a PC/SC smart card reader # /mode trace=on /terminal # #Reset the card (request ATR) and select the CardManager /card #Set the keys in key set 255 of the JCShell for authentication later on # set-key 255/1/DES-ECB/404142434445464748494A4B4C4D4E4F set-key 255/2/DES-ECB/404142434445464748494A4B4C4D4E4F set-key 255/3/DES-ECB/404142434445464748494A4B4C4D4E4F # #Begin authentication using the appropriate key set init-update 255 # #Complete authentication ext-auth # #Display the card registry to check if the applet is loaded and installed card-info # #delete 11223344556601 #delete 112233445566 card-info # #Upload the package holding the applet upload ${path}openeapsmartcard.cap # # #Install the applet in the package install 112233445566 11223344556601 # #Display the card registry to check if the applet is loaded and installed card-info
You should do a few substitutes for your project.
Maybe you are looking for
-
bought TV shows stall after the start, then get message will take hours to downloadload
New Apple TV, TV series (Sherlock Holmes) bought can not read episodes Episodes begin, after that 5-10 minute install time, start, play for a few minutes. Then playback will stop When I click on the episode and decided to restart / resume or start fr
-
New screen for HP Slate 7 Extreme
Hi all Anyone know where I can get a replacement screen or to fix my screen on my HP Slate 7 Extreme as it is cracked. Thanx
-
How to add a laptop LCD CRT monitor?
Original title: I have a laptop dell with a burned back screen so I adderd a monitor for my my veiwing but 1 laptop's lcd and 2 crt monitor how their compatiable How yo adds a crt monitor and the laptop's lcd?
-
cant text more, red x appears and formulation of general problems... no idea how to fix this?
-
How to prevent any user to install the software?
Hello In our environment, we have the field. We are in the domain user. I need to restrict the user to install software that have the admin privilege?