Problem Timeout of the weird HTTP connection on the BES!

Similar Questions

• Problem in the http connection. (simulators 5.0 os blackberry 9000 smartphone)

  Hello friends,

  I am doing my project in Eclipse Platform Version: 3.4.1 4.5 os and I'm using the 8300 Simulator. I use the http connection. When I debug my project, I work correctly. I'm download 8300 same Simulator to test the object. It worked correctly in Simulator 8300.

  but when I try 4.7 and 5.0 for Simulator that I download this Simulator my project does not work correctly the problem of http connection. Someone tell where I'm wrong?

  Thank you

  Ajay.

  also to install BlackBerry JDE 5.0.

• Internet a serious - unable to connect to any site problems, timeout problem

  Hello

  I am facing a problem when I am trying to connect to the internet, the problem is that I am getting timeout error.
  When I see the State it shows me

  Envoy: 193448 received: 123

  The problem is that I can see the bytes sent fom my computer at the rate so high that it is not allowing me to receive whatever it is... It seems to me is perhaps a kind of Virus that blocks the incoming packets and also stifles internet sending of junk (not sure what). I checked the Task Manager and I see 99% the system idle process.

  Help me what shd I do?

  Hi Abhishek,

  ·         Do you use Internet Explorer to browse the web?

  ·         What is the exact message that you receive?

  Method 1: I see you have another thread posted about the infection by the virus. I suggest that you run the scan as suggested and see if it helps.

  Method 2: Run the Fixit tool in the following article to check the issue.

  Internet Explorer error "connection timed out" when server does not

• I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection.

  I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection. It connects to other networks wifi very well with Internet access, is that the wireless in my house what it connects to. When I diagnose the problem, it says "Cannot communicate with DNS server (208.67.222.222)", and then under that it says: "languished network diagnostics remote hosts, but had not received a response." It connects to the Internet through an ethernet cable, but it is rather annoying pulling the cable autour. I currently have Windows Vista Home Premium. Thank you!

  original title: Internet connectivity problem

  Hello

  Now, you may need to contact the support of Panda Internet Security centre to change the settings so that wireless is enabled through it.

  Support link: http://www.pandasecurity.com/homeusers/support/

• "Do you want to view only the webpage content that was delivered safely. "the Web page content that willl be sent using a secure HTTPS connection, which could jeopardize the securityof the entire Web page.

  Original title: SECURITY WARNING

  When I try to open a program I have getthis message:

  "Do you want to view only the webpage content that was delivered safely.

  "the Web page content that willl be sent using a secure HTTPS connection, which could jeopardize the securityof the entire Web page.

  Is this something that needs to be corrected?  If yes how.

  Hi billkabay,

  (1) program which you are referring?

  (2) is the problem confined to this specific programme?

  (3) since when are you facing this problem?

  This problem normally occurs when you open Web pages in internet explore. Please specify if this happens when you open a program or opening a Web page or link in internet explore.

  You can see the steps in the link below

  https://community.dynamics.com/product/crm/crmtechnical/b/crminogic/archive/2009/07/09/how-to-disable-the-34-do-you-want-to-view-only-the-webpages-content-that-was-delivered-securely-63-popup-for-custom-pages-added-to-crm.aspx

  Also see the steps by Vincenzo Di Russo (check the post Saturday, May 30, 2009 11:36) in the link below.

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/e7526a5f-F953-4235-90c3-004f9b973585

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 message pop-up cigarette... "local area connection adapter does not work correctly. Problems related to the pilot experience or material"what the devil does that average and that the devil can do?

  When I logged on this morning, Windows 7 gave me the following message... "The connection to the local network problems hardware or driver. For connection to the local network adapter does not work correctly. "My Windows offered solution was go using Windows.  Help

  Hello

  Try to uninstall and reinstall the network adapter drivers.

  Download the latest drivers from the card manufacturer support page.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.
  ---------------------------

  Computer network health.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  On the State of intellectual property.

  TCP/IP and its variables usually look like this.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  Typical TCP/IP status looks like this.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.
  
  Physical address is the MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.
  
  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ------------------------

  Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Hangs on the creation of HTTP connection

  Sometimes to create a connection HTTP crashes (using HTTPConnectionFactory or ConnectionFactory).  This occurs after a number of HTTP connections have been created, used and closed.

  Once again, I have a blockage, if I wait a bit, while I am able to create connections again successfully.

  If I hold down the button end call to suspend the phone in low power mode, it will also address the issue.  When I turn it back on and restart the app, it works.  But if I just restart the application, it won't work.

  I found the problem.  You must call close on the connection, not only the input and output stream.

• Problem: Error 633: the modem (or other connecting device) is already in use or is not configured correctly.

  While I am connected to internet using Reliance Netconnect Huawei 1260, the connection disconnects after 10 to 15 minutes. Shows as connected Netconnect but does not work. I try to disconnect the connection, but it gives an error.

  Reconnect to always remove the modem and then re - login again.

  Please provede me a permanent solution to this. I use Windows 7 Enterprise

  Hello

  1. If it works well before?

  2. what version of Modem drivers do you use? Do you have any other device connected to the computer?

  First of all, I suggest you to check if the modem is compatible with Windows 7.

  Check out the link:

  Windows 7 Compatibility Center:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  I would also recommend to connect the modem to a different computer and check if it detects there. If it does not work on another computer also, then the problem is with the modem and I would ask you to contact the manufacturer of the modem for any further assistance.

  Error 633 indicates that the port is already in use or is not configured for remote access dial out. You may need to check if the VPN and the connection connection try to use the same port that is causing the problem. You may need to check the settings of the modem and change the port for your needs.

  To work around this problem, use one of the following methods:

  Method 1:

  Reserves explicitly the TCP port that is used for the VPN connection. To do this, follow these steps:

  a. click Start, click run, type regedit.exe in the Open box and then click OK.

  b. in the registry editor, find and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Tcpip\Parameters

  (c) in the Edit menu, point tonewand then click multi-string value.

  d. rename the multi-string value as 'ReservedPorts' and then double-clickReservedPorts.

  e. in the value data box, type1723-1723, and then click OK.

  f. exit the registry editor.

  Registry warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756/

  .

  Method 2:

  Use the netstat command to find the program that is using port 1723. Then, end the process for this program. To do this, follow these steps:

  a. click Start, click run, type cmd.exe in the Open box and then click OK.

  b. at the command prompt, type the following command and press ENTER:

  NETSTAT - aon

  c. in the result which appears, identify the process ID for the program, if any, who is using the TCP port 1723.

  d. at the command prompt, type the following command and press ENTER:taskkill/pid PID/f

  Note: The taskkill command terminates the process that corresponds to the ID of the process. The/F option is used forcefully to complete the process.

  e. at the command prompt, typeexitand press ENTER to quit the command prompt.

  Restart your computer. This may cause the program that uses the TCP 1723 port to use a different port.

  I hope that helps!

• cannot reduce the application on end key click on the http connection.

  Hi all

  I use version eclipse3.4 for Blackberry development. In my application, I need to extract data from a Web service via a servlet created by me. I've implemented it using a wire and it works fine.

  But the problem is, after the http connection, when control passes to servlet I can't minimize my application using events end key as a normal application. This fine event key only works when the control back on the side of the unit... My entire application got stuck when he tries to retrieve the data from webservice... Please help me on this.

  Please guide me how to implement the reduction feature in my application when it attempts to retrieve data from the server using the http connection.

  I used this package for connecting

   

  javax.microedition.io.Connector; javax.microedition.io.HttpConnection;

  Please help me on this...

  Advanced thanks and greetings,

  Michel Philippe.

  You will need to run the web service code in a separate thread...

• HTTP connection problem. What is going on?

  I am trying to write a simple program to test the validity of the URL via a http connection.

  For the good URL, the program works very well.

  Bad URL however found two ways:

  1: no answer at all (program runs as if nothing happened, waiting for user input.) The text in the EditField is the same incorrect url intentionally being tested)

  2: IllegalArgumentException in RIMConnector.open (int, int, String, boolean, FirewallContext) line: 76.

  What is going on?

  Here is the code:

  import java.io.IOException;
  import javax.microedition.io.Connector;
  import javax.microedition.io.HttpConnection;
  import net.rim.device.api.ui.*;
  import net.rim.device.api.ui.component.*;
  import net.rim.device.api.ui.container.*;
  import net.rim.device.api.ui.UiApplication;
  
  final class UrlCheck extends UiApplication {
      private EditField urlField;
      public static void main(String[] args) {
          UrlCheck theApp = new UrlCheck();
          theApp.enterEventDispatcher();
      }
  
      public UrlCheck() {
          MainScreen theScreen = new MainScreen();
          LabelField title = new LabelField("URL Check");
          theScreen.setTitle(title);
  
          urlField = new EditField("URL: ", "", Integer.MAX_VALUE, BasicEditField.FILTER_DEFAULT);
          theScreen.add(urlField);
  
          FieldChangeListener listenerCancel = new FieldChangeListener() {
              public void fieldChanged(Field field, int context) {
                  String URL = urlField.getText();
                  HttpConnection conn = null;
                  int response = 0;
                  try {
                      conn = (HttpConnection)Connector.open(URL);
                      conn.setRequestMethod(HttpConnection.GET);
                      response = conn.getResponseCode();
                      if (response == 200){
                          Dialog.inform("URL OK");
                          return;
                      }
                      if(response == 401){
                          Dialog.inform("URL Requires Authorization");
                      }
                  } catch (IOException e) {
                      e.printStackTrace();
                      Dialog.inform("Bad URL");
                  }
              }
          };
          ButtonField checkUrl = new ButtonField("Check");
          checkUrl.setChangeListener(listenerCancel);
          theScreen.add(checkUrl);
          pushScreen(theScreen);
      }
  }
  

  Okay, that was stupid.

  I caught the IllegalArgumentException as well and it fixed the problem.

• How to get the gif file hosted by using the Http connection?

  Hello

  I have an application that downloads animation gif from a server by using the http connection. Here is the code I use to download the image.

  try {
  
              httpConnection = (HttpConnection) Connector.open(url, Connector.READ_WRITE);            httpConnection.setRequestMethod(HttpConnection.GET);
  
              if (httpConnection.getResponseCode() == HttpConnection.HTTP_OK) {                DataInputStream dS = httpConnection.openDataInputStream();
  
                  byte[] data = new byte[dS.available()];                dS.read(data);
  
                  gifImage = (GIFEncodedImage) EncodedImage.createEncodedImage(data, 0,data.length);
  
              } else {                throw new Exception("ResponseCode:" + httpConnection.getResponseCode());            }        } catch (Exception e) {                        gifImage = null;            e.printStackTrace();        }
  

  the problem with this code is, when the gif file is 1175 bytes above, it does not load the gif.

  example:-If the gif on the server is 1500 bytes, this code retrieves only 1175 bytes.

  I think that the rest of the bytes are sent in a different package. But how to get them.

  can someone please provide a code for buffering the inputstream?

  any help is appreciated.

  Dieye

  Hmm, nobody seems to know how to do, it seems. Here's how I did it.

              httpConnection = (HttpConnection) Connector.open(url, Connector.READ_WRITE);
              httpConnection.setRequestMethod(HttpConnection.GET);
  
              int responseCode = httpConnection.getResponseCode();
              if (responseCode == HttpConnection.HTTP_OK) {
                  inputStream = httpConnection.openInputStream();
                  ByteArrayOutputStream byteArrayOutputStream = new ByteArrayOutputStream();
  
                  byte[] buffer = new byte[256];
                  int len = 0, imageSize = 0;
  
                  while (-1 != (len = inputStream.read(buffer))) {
                      byteArrayOutputStream.write(buffer);
                      imageSize += len;
                  }
  
                  byteArrayOutputStream.flush();
                  byte[] imageData = byteArrayOutputStream.toByteArray();
                  byteArrayOutputStream.close();
  
                  gifImage = (GIFEncodedImage) EncodedImage.createEncodedImage(imageData, 0, imageSize);
  

• I use Photoshop CC and I have problems to use the scanning feature PLC culture and the strraigten.  Other printing features work within the progrram, but no connection when I use don't automate.

  Am I missing a configuration of PLC to allow me to crop and scan several photos?

  With the help of 8.1 with canon MX340 wireless and final version of Photoshop CC.

  Help.

  [email protected]

  VIC

  I plugged a usb cable and I was able to use the WIA import feature and

  the menu of the controller,

  He gave me the opportunity to select the printer and scan using the automaton

  function.

  When I removed the cable, it would not recognize the printer scanner in the

  Wireless mode.

  I tried to restart the system, no luck.

  In fact, when the cable is removed, the function to automate is

  "grayed out" which would explain why it cannot find the scanner.

  Any ideas?

  VIC Ouellette

  K1CGI... QRZ?

  In a message dated 12/09/2015 11:41:18 eastern standard time,

  [email protected] wrote:

  You talked

  by [email protected]

  (https://forums.adobe.com/people/[email protected]?et=notification.mention//forums.adobe.com/people/ [email protected]? and = notification.mention) in Re: I use Photoshop CC and I

  problems to use the scanning feature strraigten and the cultures of the automaton. Another impression

  features work within the progrram, but no connection when I use don't automate.

  in Adobe Community - view [email protected]of reference for you

  (https://forums.adobe.com/message/8274458?et=notification.mention#8274458)

• I intalled Creative Suite 6 on my iMac and the serial number has been validated, but when I connect activate the software, it is suspended until I have the strength of smoke activation. No error message; I have no problem signing in the case.

  I installed Creative Suite 6 on my iMac (Yosemite) and the serial number has been validated, but when I try to connect to activate the software, it is suspended until I have force the activation of quit smoking. No error message; I have no problem signing in the case. Help?

  Hi Jdburton,

  Please check: https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  Concerning

  Megha Rawat

• Speed problems according to the channel in which I connect - Possible hardware problem:

  Hello

  I bought a R8000 about 1 month, and it worked pretty well. Last week, I read a review on the router suggested what a turn on the Smart Connect. That's when the problems started.

  -Panda USB wireless that worked perfectly started to have speeds of 1.5 Mbps when my service is Comcast 150MBps explosion. Before turning on the S.C., it reaches that speed easily.

  -After the filming of Smart Connect, did not improve the performance of the USB dongle. It is remained at 1.5 Mbps to 3MBPs. I tried to fix it for a week now.

  -J' I reset the modem (button reset button for 10 seconds), configured my router again and added to my dongle is malfunctioning, the router started having trouble to detect my external WD "My passport".

  Today, troubleshooting the wireless dongle with Panda, I changed the channel 5 GHz at the elementary school and the speed is back to 170 Mbps. The router is kept at approximately 3 M from the computer without any obstacles between them.

  Finally, the streaming of my router (with cable) to my TV using DLNA sometimes stutters. yesterday, she even caused the TV to not recognize the transmitted file.

  Can you help me troubleshoot the router more far to find if it is defective?

  Thank you

  As I started the topic, I would give it a closure. My problem was that I had a USB Wireless Dongle of Panda, who performed in the secondary channel (high way) but ridiculously low in the primary (Channel Low). As I had Smart Connect lit, I couldn't control my connected computer channel and appeared the problem was with the router.

  That said, I noticed a better balance between devices when I disabled the dynamic QoS option. I don't know if the algorithm for dynamic QoS is simply wrong or its implementation by the current firmware (V1.0.3.4_1.1.2) is buggy.

  In any case, currently, everything works with me. Explosion of Comcast 150Mbps and rapid tests is between 157 to 153Mbps in tests using a channel 5 G.

• http connections fail after removing an application via the BES

  This is consistent - happened on three different phones.

  Measures taken since the BES

  1 deploy an application that uses an HTTP (definition of a custom policy of IT) through the BES connection. Everything works fine

  2 remove the app (by its configuration was rejected.)

  3. assign the policy to the default device

  4 configuration of the software place the device no

  5 deploy

  5. wait and check that app has been removed from the default value of advertising device it in place policy

  Now, the unit measures

  1. install the app even through Javaloader - now http connections fails

  On the curve (Rogers)

  java.io.IOException: Tunnel failed

  on Tour (Verizon)

  javax.microedition.io.ConnectionNotFoundException: Protocol not found: net.rim.device.cldc.io. "http. Protocol

  Any ideas?

  Turns out I had put extra quotes in my url string. It works fine now.

  This diagnostic network (DB-00684) tool was very useful.

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800563/What_Is...