Problem to burn a DVD with Windows Live Movie Maker

Similar Questions

• Need help with Windows Live Movie Maker and DVD Maker

  I have worked with Windows Live Movie Maker to cut a continuous piece of video footage into separate clips (these are dance performances by dancers of different about 13)... then once they were divided into 13 clips separated, I then cut them at the beginning and at the end of each clip (performance) and then used legends at the beginning of each clip with name of the dancer.  I also added a title at the beginning of the film page, and I added at the end of the credits.  Then I clicked on save the movie and had to wait an hour or more... Finally, when this was done, I opened Windows DVD Maker and clicked on add items... went to my file and put my film recorded in the creation of DVD.  I used also changed the Menu template to that for shows (it is red and black and has lights and cameras as a staging.  I thought everything was going along fine until I played the disc engraved on my Smart TV DVD player.  For some reason when I click on the stages (or chapters) to see the performance under this button, it starts to play the dvd in a few seconds or a few minutes in some cases in the performance... I've lost countless blank DVDs not to mention hours and hours of time... and I'm so frustrated... I'm ready to SCREEEAAMMM!  Also some of the performances were not even under one of the buttons or frames... in other words you could not use the arrow keys to locate some of them to click it and find out.  Yet, when I went back and pressed the 'Play' button, I could fast forward through the entire movie and find performances that seem to be missing the scenes/buttons.  Any help or advice before I blow a bridge! ???

  Thank you.

  /PR

  I have worked with Windows Live Movie Maker to cut a continuous piece of video footage into separate clips (these are dance performances by dancers of different about 13)... then once they were divided into 13 clips separated, I then cut them at the beginning and at the end of each clip (performance) and then used legends at the beginning of each clip with name of the dancer.  I also added a title at the beginning of the film page, and I added at the end of the credits.  Then I clicked on save the movie and had to wait an hour or more... Finally, when this was done, I opened Windows DVD Maker and clicked on add items... went to my file and put my film recorded in the creation of DVD.  I used also changed the Menu template to that for shows (it is red and black and has lights and cameras as a staging.  I thought everything was going along fine until I played the disc engraved on my Smart TV DVD player.  For some reason when I click on the stages (or chapters) to see the performance under this button, it starts to play the dvd in a few seconds or a few minutes in some cases in the performance... I've lost countless blank DVDs not to mention hours and hours of time... and I'm so frustrated... I'm ready to SCREEEAAMMM!  Also some of the performances were not even under one of the buttons or frames... in other words you could not use the arrow keys to locate some of them to click it and find out.  Yet, when I went back and pressed the 'Play' button, I could fast forward through the entire movie and find performances that seem to be missing the scenes/buttons.  Any help or advice before I blow a bridge! ???

  Thank you.

  /PR

  ===============================================
  First of all a question... did you you save the project in a video such as format
  . WMV or. MP4? Or have you just of WLMP project folder?

  I suspect that DVD Maker is to see your movie in one file
  and he has no idea where are your scenes. More than likely it is
  creation of scenes on his own in arbitrary places.

  In order for DVD Maker correctly, identify individual scenes
  each stage must be registered as an individual video clip, then
  the collection of video clips can be imported and each of them must
  become an individual scene.  DVD Maker is supposed to accept
  up to 18 scenes.

  Just an experience you can import your new original
  video clips in DVD Maker and see if it works properly. If
  It does what you want... change and re-record your clips one video
  both will be the fix.

  Good luck...

• "Sorry, Move Maker cannot open this project file. The file is not compatible with Windows Live Movie Maker or damaged. Please select a different project file. »

  Hello!
  I installed Win Live Movie Maker, but when I tried to open my .mswmm file I only got this message: "sorry, Move Maker cannot open this project file. The file is not compatible with Windows Live Movie Maker or damaged. Please select a different project file. "The file will open correctly in Windows Live Movie Maker 7, so everything should be OK. What I am doing wrong?

  Hello

  This is supported in Windows Live movie maker file type.

  http://help.live.com/help.aspx?project=wl_movie_makerv1&market=en-IE&querytype=topic&query=wl_movie_maker_ref_supportedfiles.htm

  For any request or problems related to Windows Live Movie maker, please post to the Windows Live Help forum.

  Here is the link: http://www.windowslivehelp.com/product.aspx?productid=5

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can I get a video that could not save and was made with Windows Live Movie Maker?

  I kept a video I did with Windows Live Movie Maker I accidentally cancelled the action, and the program stopped.  Is it possible that I can get the video or at least the project file?

  Thanks a lot for your answer.  I tried your suggestions, nothing worked.  I myself have resigned to work on--she IS DO NOT recoverable.

• Problem with Windows Live Movie Maker

  I created a movie, 30 minutes in length, using Windows Live Movie Maker.  The film will be a gift to a member of the family for Christmas... in 3 days!  I can't, however, when in the final stage to choose the style of the menu, select specific points in the film that I would be the beginning of a new "chapter".  How can you do this?  At the present time, it selects just parts at random the film as a new chapter.  Help, please!

  I created a movie, 30 minutes in length, using Windows Live Movie Maker.  The film will be a gift to a member of the family for Christmas... in 3 days!  I can't, however, when in the final stage to choose the style of the menu, select specific points in the film that I would be the beginning of a new "chapter".  How can you do this?  At the present time, it selects just parts at random the film as a new chapter.  Help, please!

  ====================================
  Create several small projects and publish (save) each
  an in the. WMV format in a folder on your hard drive.

  Then import the collection. WMV to DVD Maker files and
  each video clip will be becoma a scene (chapter) on your DVD.

  You can have up to 18 scenes.

  See the section "How are scenes created for my DVD" of
  the following article:

  Windows Vista - DVD - video burning - frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/DVD-Video-burning-frequently-asked-questions

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Disorder by e-mail and/or play burned video VCR video with Windows Live Movie Maker

  Using Windows Live Movie Maker, I created a video from pictures and copied and he accompanied by music.  I tried to join my hotmail e-mail account, but it's a too large file.  I tried to compress them into a zip file.  Although I was able to record it in a zip file, I did not send as an attachment is.  He said that the zip file is 30 MB and I have 25 MB.  I then tried to burn it to a DVD-R.  It seemed to have burned, but when I tried to play the DVD on my VCR, nothing happens.  I used the wrong type of DVD?  I would like to send video by e-mail or regular mail on a DVD.  I wonder if you have solutions.  I'm not very tech saavy better so simple.  Thanks much for your thoughts beforehand. FB

  Using Windows Live Movie Maker, I created a video from pictures and copied and he accompanied by music.  I tried to join my hotmail e-mail account, but it's a too large file.  I tried to compress them into a zip file.  Although I was able to record it in a zip file, I did not send as an attachment is.  He said that the zip file is 30 MB and I have 25 MB.  I then tried to burn it to a DVD-R.  It seemed to have burned, but when I tried to play the DVD on my VCR, nothing happens.  I used the wrong type of DVD?  I would like to send video by e-mail or regular mail on a DVD.  I wonder if you have solutions.  I'm not very tech saavy better so simple.  Thanks much for your thoughts beforehand. FB

  =====================================
  First of all, I have to ask what is the Format (extension) of your
  saved file. If the extension WLMP... it's a project file
  and not a video file. If you have saved it as a video in the
  . Format WMV Movie... the following information may be useful:

  If the file size is too large for e-mail... you could download
  the file to a site as follows and then send it
  link to download to your recipients.

  "SendSpace.
  http://www.sendspace.com/

  It's very simple on SendSpace site the following...
  the steps are all you need to do.

  On the left, click on the Browse button and it will open a window
  allows you to access the files on your hard drive.

  Navigate to the folder that your video is and select it.

  On the left, click on the download button.

  When the download link appears... left click copy
  button, then click right and paste the link in an email
  message to your recipients.

  Recipients can download the video file as follows.

  On the left, click the link in the e-mail message.

  When the SendSpace site load.

  Scroll down a little and left, click on the blue text *.

  "Click here to start the download from sendspace".

  Save the file to your desktop and view in Windows Media Player.

• Possible with Windows Live Movie Maker 7 chapters?

  I am doing my first project. I would like to have a main menu with chapters like on a real DVD. Is this possible with a true WLMM? If so, how? Thank you!

  Hello

  You can follow the links below and check if they help you accomplish what you want.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Movie-Maker

  http://Windows.Microsoft.com/en-us/Windows7/use-custom-settings-to-save-a-movie-in-Windows-Live-Movie-Maker

  http://www.Microsoft.com/education/teachers/guides/Windows_Movie_Maker.aspx

  If the above given links don't work then you can publish your application in the Windows Live Solution Center.

  http://www.windowslivehelp.com/product.aspx?ProductID=5

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• film on windows Movie maker is not compatible with windows live movie maker

  My sister made me a video with Windows Movie Maker and I have Windows Live Movie Maker, and he says that is not fully compatible.  Please help, his computer crashed and there is a video of my twin nephews has done for me.  There are currently on a USB key.  I'll do something to make it work.  It was during the last two years of their lives with me and I live 16 hours away from them.  Any suggestions would be greatly appreciated.

  Thank you

  Mary

  Thank you for your response.  I have Windows 7 and I have windows live Director 2011. When I plug in the USB, it says that the file ext is MSWMM

  Any information you have would be so appreciated.  Thank you very much

  Mary

  =========================================
  . MSWMM is not a video file... it's a project file
  Movie Maker XP or Vista Movie Maker 6. It is more useful
  for a re-release in Movie Maker on the system, it was created
  sure if you have copies of all the original source files...
  (Photos, video Clips, Audio Clips)...

  Ask your sister to save the project in the. Film WMV
  format, then send the. WMV file to you. You could
  who discovered in Windows Media Player.

  Here is some info on the savings that can be useful to your sister:

  XP Windows Movie Maker 2.1...
  To save in a .wmv movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  Windows VIsta Movie Maker 6...
  The following article offers information on editing
  (save) in a film format that will play in
  Windows Media Player and can be shared.

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

• problems with windows live movie maker

  I made a video Windows live Director. He sent to myself, I am unable to watch it on any computer except the one on which I made the video. What should I do?

  This is a real video with the. Film WMV extension?
  Or is it just a movie maker project file .mswmm?

  A Movie Maker-.mswmm project file does not include the
  source files... (Picture files, video Clips, music)... it's just
  records the position that they are saved in your hard drive.
  Basically, it's just a recipe for a movie. And... is useful only
  for a re-release in Movie Maker.

  The savings in the form of movie info...

  XP Windows Movie Maker 2.1...
  To save in a .wmv movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

• Big problem with Windows Live Movie Maker on Windows 7 / WLXPhotoBase.dll

  Dear all, when I start windows live Director in windows 7, I get the following error:

  The procedure entry point is Win7... not found in dynamic link WLXPhotoBase.dll library.

  Do you know how to fix this?  I try to reinstall the program, but it doesn't matter!

  I also tried the following:

  Click Start, run and type the following command:

  regsvr32 \windows\system32\WLXPhotoBase.dll

  To replace the WLXPhotoBase.dll file:

  1. close all programs.

  2. click on start, point to find and then click files or folders.

  3. in the named box, type WLXPhotoBase.dll.

  4. in the box look in, click workstation, and then click Find now.

  5. in the list of research results, right click on WLXPhotoBase.dll and then click Rename.

  6. type WLXPhotoBase.dll.old and press ENTER. If there are multiple copies of the WLXPhotoBase.dll file in the list, rename each copy.

  But it does not at all help!

  I'm impotent, thanks for your response.

  Thanks for your help

  Hi PJ EN

   

  As you use Windows Live Moviemaker I would recommend checking resources specific to Microsoft Windows Live. Please visit the links below to find a community that will provide the support that ask you in the right direction for applications Windows Live-

  http://windowslivehelp.com/forums.aspx?ForumID=f5dad528-638d-4AD1-BE14-31751f8af98f

   

  I hope this helps.

• How to convert Quicktime .mov files to work with Windows Live Movie Maker

  I understand that Movie Maker is not compatible with QuickTime .mov files. I don't want to convert my files whenever I want to make a movie from video clips, I take because I'm not very computer savvy. I don't even know if I put this in the right forum because I don't have no idea what product we have 9 How do I know)
  How to stop Windows Live to import stuff on my camera card in this format and do it in the format of 'just '?

  I understand that Movie Maker is not compatible with QuickTime .mov files. I don't want to convert my files whenever I want to make a movie from video clips, I take because I'm not very computer savvy. I don't even know if I put this in the right forum because I don't have no idea what product we have 9 How do I know)
  How to stop Windows Live to import stuff on my camera card in this format and do it in the format of 'just '?

  =========================================
  I was wondering what version of Windows are you using? XP, Vista, 7

  Sorry... but with the .mov files, the conversion is the only solution.

  Here is a way to convert online so that you won't have to
  Download and install a software:

  Try the following free online Converter:

  Media-Convert
  http://media-convert.com/

  Apple Quicktime conversion instructions

  (1) in the field "File"... click on "Browse".
  button and navigate to the .mov file you
  you want to convert. When you select the
  file... the path will appear in the field "File".

  (2) the "Input format" field should automatically
  show... Let it 'Apple Quicktime (.mov)'
  as it is...

  (3) "output size" has two windows...
  does not display the field on the left, "no video".
  PRESET"... leave it as what...

  (4) in the next to move to the right window
  You can choose the format you want
  convert... try:

  Windows Media Video (.wmv)

  (5) on the left, click on the blue * OK button.
  (sometimes the site is busy... If the conversion fails... try again)

  Now... wait as the file to be converted.
  (be patient)

  Once the conversion is completed, you will see:
           
  File converted successfully!

  Your file will appear right of a little green
  ... left click on the file name... save it as
  ... appears on the left, click on the "Save" button.
  Choose a folder to save in (I always download)
  on my desk)... on the left, click on the "Save" button.

  When the file is downloaded, you should be able
  to play with Windows Media Player and it should
  be compatible with Movie maker.

  That's all! Good luck.

  More info...

  MOV is the format QuickTime from Apple and the
  Software «QuickTime 7 Pro» allows to convert MOV files...
  (this is the commercial version, not freeware)

  QuickTime 7 Pro
  http://store.Apple.com/us/product/D3381Z/A

  Instructions for the conversion of the .mov files are on
  page 42 of the .pdf document
  "Exporting files with QuickTime Pro".

  QuickTime 7.6 user guide
  http://images.Apple.com/QuickTime/PDF/QuickTime7_6_User_Guide.PDF

  Or... you can use the following to freeware
  convert .mov files to .avi format and
  import into Windows Movie Maker for
  combine them into a single video file .wmv or .avi.

  Pazera Free MOV to AVI Converter
  http://www.Pazera-software.com/products/mov-to-AVI-Converter/
  (click on the blue Download button not the Red)

  The name of the file that you download is:
  'Pazera_Free_MOV_to_AVI_Converter.zip '.

  After you download... Unzip and open the program...
  (no installation required)

  Drag and drop one or several .mov files...

  Choose an output directory...

  Select... WMV AVI - Video Codec - version 1 (WMP 7)...

  Convert... (the button is on the top tool bar)

  When the file is converted, you can change it in
  Windows Movie Maker. Simply open Movie Maker
  and go... File / import into Collections... and
  Access your converted file.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Creating a DVD of Windows Live Movie Maker

  Once you copied all your photos in movie maker and added music how to transfer this file windows DVD Maker the DVD maker does not accept the wlmp file

  Once you copied all your photos in movie maker and added music how to transfer this file windows DVD Maker the DVD maker does not accept the wlmp file

  How to convert and burn files WLMP on DVD

• Could not open windows live Director files/projects error: Windows Live Movie Maker has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program...

  Original title: Windows Live Movie Maker

  Hello! I have a problem with windows live movie maker. I had been using windows live movie maker before and was able to make several projects already.  But recently I could no longer open my files and the following messages keep appearing on: "Windows Live Movie Maker has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available.  I downloaded the Windows Live Movie Maker program several times, but it does not work.  Does this mean I can have deleted a file/program to do work and recover all the projects I've done?  I remembered that once, I was removing a "Windows Live" in the program folder files because I wasn't happy with the Windows Live Messenger, kept popping up, which was not able to use, so I removed it from the list. Help, please!

  Hello

  The question you have posted is related to windows live movie maker and would be better suited to the community of windows live. Please visit the link below to find a community that will provide the support you want.

  http://windowslivehelp.com/product.aspx?ProductID=5

• conversion of files wlmp files wmv on windows live movie maker

  I made a movie in windows live movie maker and can't convert wlmp to wmv file. I tried to register as recommended by e-mail and computer. but none of this has worked. My just fizz computer stops to load the file and exit at 58%. I don't have the original movie files that I made the film from, all the play all this. I also have enough space in the computer's memory to make it a problem. can someone help me please?

  Hello

  1. which version of the Windows operating system is installed on your computer?

  2. were you able to convert files successfully before?

  It seems to be a problem with Windows Live Movie maker. It would be better to post the same question in the Windows Live Movie Maker portal for assistance. We have a dedicated team to help you with such questions.

  Movie Maker Portal: http://windowslivehelp.com/product.aspx?ProductID=5

  Hope the information is useful.

• Modeling video in Windows Live Movie Maker

  I was using just Windows Live Movie Maker for editing training videos (add captions, etc.). It's all right, then I struggled to record a video and the next thing I knew that all my videos have been x'd on red. I tried to open the vids in the program (open with) so that first of all, open the program and add the vids. All I see are red Xs. HELP!

  Hello

  In dealing with the problem with Windows Live Movie Maker, I recommend you post your question in Windows Live Solution Center for assistance:

  http://www.windowslivehelp.com/

  Hope the helps of information.