Problem to read the details of the new widget news

Similar Questions

• Free extractor error - could not read the news SFX

  I hope I am in the right forum!

  I am downloading Gamblock on my laptop, but when I run the file and try to check out I get the error "FreeExtractor error - an error prevents this program to continue - could not read the news SFX - it is probably corrupted.

  GamBlock are several that this isn't a problem with the link, and to be honest I have not had problem with it in the past. I am at my wits end with it but now and wonder what it is that it blocks and think it must have something to do with the system in some way.

  The laptop is brand new

  Any help would be great!

  Hello les150,

  I suggest that you run the System File Checker to see if you have corrupted system files.

  First of all, we run System File Checker to see if you have a corrupt file system.

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any violation of the integrity and repair any damaged operating system files.

  Restart your system

  Now run the command chkdsk:
  1 disable any security software before you attempt to upgrade or do a clean install.
  2. make sure that your computer is updated (devices and applications)
  3. disconnect all external devices before installing.
  4. check your hard disk for errors:
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: chkdsk /f /r
  When you restart your system, your computer will be scanned for errors and will try to correct them.

  If please reply back and let us know if this helped with your question.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error code 101-752 dotnet framework error, problems to load the new software of the printer

  Error code 101-752 dotnet framework error, problems to load the new software of the printer

  Hello

  (1) have you made changes before the start of this issue?

  (2) when you get the error message?

  (3) is the specific question of the installation of the printer software?

  (4) what is the brand and model of the printer?

  It seems that you need to fix .net Framework installed on the computer. Follow this link and see if it helps.

  Fix the .net Framework installation

  http://support.Microsoft.com/kb/976982/en-us

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows

  See also:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Let us know if that helps.

• I've just updated my LR, but still can not read the new RAW files of my brand new Sony a6300. said 'impossible to read these files' is Adobe should update it program with new firmware to manage these new folders? Or something escapes me?

  I've just updated my LR, but still can not read the new RAW files of my brand new Sony a6300. said 'impossible to read these files' is Adobe should update it program with new firmware to manage these new folders? Or something escapes me?

  You updated Lightroom to version 6.5? This is the version you need. What is the exact wording of the message you receive?

• How to solve "here has been a problem to read the data in the layer. read the composite data instead? »

  Hello

  I'm working on the UI for a 2 month Word Press theme, and it has a ton of layers with file size of 900 MB.

  When designing, I get a message that says:

  "here was a problem to read the data in the layer. read the composite data instead? »

  Please solve this problem because I am so tired of working on this that I don't want this effort in vain.

  and sorry if my English is bad.

  

  Hi AymanAlrifai,

  Would you be able to share the file problem with me zipped upward? petgreen [at] adobe [dot] com

  I'll see if I have the same problem and check with the team to investigate the issue here and see if we can resolve it for you.

  Kind regards

  Pete

• Server version 308 cannot read the new 318 of the repository version

  Hello
  
  I installed OBIEE 11.1.1.5, the client gave me its SPR, but when I tried to open this message appears:
  "Server version 308 cannot read the new version 318 of the repository.
  
  What should I do to open the rdp Protocol?

  You must update the RPD to the latest version using ua.bat of \OFM\Oracle_BI1\bin\

  Pls mark as correct

• Problem connecting to the new router

  When we all first our WVC54GC Setup was quick and easy, and we used it without event for 1-2 years. Now, we have replaced our old router with a WRT610N. Everything else, wired and wireless, connected to the new network without event after I have updated their SSID settings and security. (A new uses WPA - WP2, the an old WEP) but for this camera I can not to do. I read the articles on this page and plugged all the correct settings, but it still won't talk of it in wireless mode. (With a cable that is no problem). What I'm missing here?

  You must be identical on both devices wireless settings to establish communication between your router and the camera... Ensure that your camera settings Wireless 2.4 GHz of your router... Try Basic WEP security and see if that works, if WEP works you can change security to WPA... Once you have set matching the wireless settings, unplug the cable ethernet and power cycle the two devices and see if you can see your wireless camera...

• Incredible problems to get the new workgroup C8180 All-in-one

  I bought a C8180 All-in-one printer to the end of September. When I plugged in and installed the software, everything seemed to function OK (I didn't test printing from the computer at the time), but after a short period of time to print Microsoft Word and Wordpad failed, started working and then failing again every time I reinstalled the software to try to solve the problem. Then began a long series of emails with HP technical support. In the next two weeks I have uninstalled and reinstalled the software 6 or 7 times in several different ways, under the instruction of HP. But he never could get Word and Wordpad works correctly. Finally, once again, under order of HP, he worked with a fake installation of HP Deskjet 990c printer. Then I noticed that it was more possible to digitize documents and slides to the computer, except by using a chip memory such as an intermediate storage. Then I went on vacation after spending about 30-40 hours two weeks previous emailing and calling the HP technical support.

  Back from vacation in the third week of October, I took the issue once again with HP support. Yet once, I spent hours and hours writing emails and reinstalling the software but to no avail. HP finally proclaimed this a problem difficult and said that it would increase the level of support. A gentleman named Sylvester who sent someone would phone a day pre-arranged to see more advanced techniques could be applied to the problem. Needless to say that the phone call came not despite my cancelling several meetings to wait in it (I should have better that they had promised to phone back me several times before and has never done).

  Finally, I called customer service to the local office of HP. (At least you can get to them without having to listen to the music for half an hour for the price of 5 p / minute.) They said that they would ensure someone would contact me and would monitor the call to ensure that happened. A week later I ' d has received no call, and I went to the local customer service. Has been raised to the top level of management, and finally, after a few reminders more than me, they managed to get a senior technician, called Natheem, in their technical service Cap to call me.

  He has been very helpful (and actually phoned me several times), and finally he forced me to go through the complicated process of getting Microsoft in India (via a conference telephone with Cape Town and myself - apparently it would have cost me a lot in telephone charges, but I have not had the Bill) to give advice on how to spend my Windows XP with service pack 2 and my internet explore to IE6. I reinstalled the C8180 software once again. No difference, still the same problems, except that now, Microsoft Word would work with the HP C8180 printer driver.

  At this point, Natheem said that it must be a hardware fault and arranged for the device must be replaced.

  The new unit arrived last Thursday. I again carefully uninstalled and reinstalled the software, connected to the machine and got the same problems, but once again with Microsoft Word cannot print with the C8180 printer drivers.

  I tried to contact Natheem again once in Cape Town this afternoon. After half an hour of expensive music additional I have with a person named Waleed who said that Natheem is on a call but he would get to call. No call came.

  So on the forum, I would like advice on what to do with a new HP C8180 All-in-One printer which:

  1. not print Word documents (except by using a printer deskjet 990c driver)
  2. used to scanning documents or transparent to the computer
  3. will not print photos from the computer using HP photosmart essential, or other photo editing software

  I'm also rather fed up of the assistance provided by HP. When you get through them they always try to help, but pass through, especially for someone who knows your case is more frustrating (and costs). In an attempt to get the thing, I also had to downgrade my computer Windows XP service pack 2 OS and my internet explore to IE6. I spent probably 50-60 + hours of the last two months, trying to get the thing work.

  Any advice on what to do next would be welcome.

  BobA

  Hi David,

  Well, my story has a happy ending. I stopped trying to untangle the printer after a whole month of working hours, including a lot of phone calls to the SA and responidng to dozens of emails. But then I bought my wife a laptop Toshiba for Christmas - and it worked perfectly first time. In any case, my computer was in a bit of a mess especially when the messing around I had done on this to HP support, so I decided to reload my operating system (after reformatting hard disk), I just finished. And guess what the C8180 works perfectly (at least until now anyway)! I just updated my OS to SP2 (according to HP support the C8180 has problems with SP3), and I kept my Internet Explorer version 6 (higher versions - 7 I think - again can cause problems according to HP support). I somehow use Firefox. But now its work, its quite an impressive machine.

  I want to say individual personnel in support of HP thin is always very friendly and helpful. It's just a phone, it costs and often listen to music for a long time, its very difficult to get hold of the same person again, if you spend hours to repeat the details of your problem, and despite vehement promises they call you rarely back - probably because they are too busy. His support system which is very poor, not the support staff.

  In any case you have a different problem. If your printer does not work on computers with different operating systems. I would say that you have good arguments to either get a new printer or your money under the guarantee.

  Good luck

  BobA

• Problem in reading the PWM signals in myRIO 1900

  Hi guys,.

  I work with myRIO to generate PWM pulses.

  Here is the block diagram of my circuit.

  

  I connected external to the analog input pin PWM pin. So I can watch the PWM pulse in the waveform table.

  But the waveform is not clear. This is as shown in the screenshot.

  

  

  See that the waveform is not correct. When I'm watching the same PWM pulses in the CRO (cathode ray Oscilloscope, oscilloscope real in the real world), I get exactly the waveform. that is, the PWM pulses are generated correctly. But the analog read is unable to read the PWM pulses.

  I faced the same problem with the pin of analog reading earlier when I read the input voltage. Is not give continuous reading of the voltage input.

  Please guide me how to read these impulses via analog read.

  Please tell me at what frequency range, I can use this myRIO to generate impulses?

  I am able to use 40 kHz?

  Hi rcs.
  The desired pulse frequency is 10 KHz. My sampling rate must therefore 100 kHz, which is not possible in data acquisition mode. There is another problem with the myRIO. Only AI0, BI0 and CI0 has n-sample mode. The analog input pins is still have no n-sample mode. But in my project, I need 4 pins of I in n-sample mode, which is not possible. In addition, the sampling rate should also be favourable, which does not happen in my case. We can say that this is a disadvantage of myRIO with data acquisition mode.
  The only alternative to solve this problem is to use FPGA in myRIO.
  He can taste a 25nS rate.
  But little complexity is there

• Problem using: read the spreadsheet file

  Hello

  I have 2 problems with reading spreadsheet file:

  (1) for the use of .txt file I can get the first column and not the other (even if I chose the correct output...)

  (2) this does not at all when you use my .xls file

  I must do something wrong but can't find what...

  Has anyone an idea?

  I have attached the .VI and my two files.

  Thank you

  User

  A native Excel file is NOT a text file.  It is a format of custom file created by Microsoft.  This is why you must use ActiveX to interact with him.

  The worksheet ' ' folder features found in the work of LabVIEW with text files (delimited by tabs, CSV, etc.).  The text files are a format more generic that can be read by programs such as Notepad.  Tried to use Notepad to open an .xls file?  It does not work.  Excel can open a text file, because it is a generic format.

  So even if everyone automatically thinks "Excel" when they see the word "Spreadsheet", the two are not synonymous.  In the case of LabVIEW, 'Spreadsheet' made reference to a delimited text file.

  Who is?

• Problems with reading the series bytes

  Hello

  I currently have a PIC18F microcontroller serial communication with LABview using the base read and write.vi series. The PEAK sends strings such as "V222! (V is the character of the header, and! being the end character). Then, I have a program to take each individual character read and concatenate them in a larger string for data extraction. The port has been configured to 38400 baud and be only a single byte of long.

  The captain sends this one byte at the time and the problem here is that LABview seems to be only reading V most of the time, and occasinally has 2. Since it doesn't seem to be never read the end character, the sequence of extracting data from my code is never executed.

  A few questions I have are:

  The captain may send one byte at a time, but also all other devices communicate through a serial port.  The definition of the serial port involves both a byte.  Actually it's really a LITTLE at a time.  But serial port parameters leads to the gathering of 7 or 8 bits to produce a byte.  The PEAK sends a follow-up byte to another byte, etc.  The time between shipments of the byte may be too small to read contiguously in your Labview program.

  At very slow speeds, it could really work.  At 300 baud (3mS / bit), there are 33 mS to send a byte (8-bit + stop bit, start bit).  So if your loop runs fast enough, you get every byte one at a time.  But there is the overhead of other code to store the bytes, etc..

  38000 baud to only 0.2 mS to send a byte.  LabVIEW is not fast enough to loop at this rate to capture all the bytes individually.

  But why bother?  Simply capture all the bytes and treat them as a complete message.

• problem to install the new language of the interface

  When I try to install the new language pack of interface on my win xp SP3 this message, it is displayed:

  "The windows XP MUI version seems to have been installed on this system. Persian interface pack for Windows cannot be installed on this computer.

  What should I do to install?

  Hi amirtourehei,

  Basic language and edition required to install the Persian windows interface pack is English

  1. to install and use the Interface Persian Language Pack (LIP), you must add the Persian language support to the operating system, and then install the fonts. The following section describes the steps necessary to accomplish these tasks:

  a. open regional and Language Options of the Control Panel, then go to the languages tab.

  Note: If you are using the category view, click on Date, time, language and Regional Options, and then click regional and Language Options and then go to the language tab.

  b. Select the option install files for complex scripts and languages from right to left (which includes the Thai), then press the OK button.

  Note: Please have your Windows CD ready, because you may have to copy some files in your system

  2. always make sure that the underside of update is installed on your computer:http://www.microsoft.com/downloads/en/details.aspx?FamilyId=D3F8F6AB-84F1-4095-8709-DF509B1BEE22&displaylang=en

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have problems to install the new version of messenger

  would like to download the new version of messenger, but when I try to install it goes to about 74% and then it restores and don't install, then he sends me to the page more or less remove windows live essential but I try but does not currently I have version 2009 (build 14.0.8064.2060) would like to have info thanks.

  Hello BYFIELD, welcome.

  I recommend trying a clean boot to see if maybe parts of the Live Essentials are running in the background. Try this:
  1. click on START

  2 type "msconfig" (without the quotes) and press enter

  3. go to the "Startup" tab and uncheck all the entries displayed

  4. click on 'Apply' at the bottom right

  5 restart your computer
  Then try to update of Live Messenger. If this does not resolve the problem, try to force - remove the application by Windows Installer Cleanup Utility (WICU)
  1. go to: http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe
  2. download the file to your computer, run the package and install the utility
  3. run the utility that should be in your menu START > programs section
  4. Select Live Essentials and run through the process to remove it
  5. next, restart your computer and try to reinstall Live Messenger
  Let us know what happens
  
  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot read the new MSN Backgammon.

  I can't play the new version of Backgammon on the MSN site. I don't care
  How to set the resolution of my screen, I do not see the bottom of the Board!

  Cannot play any of the new multiplayer games, either.

  Have NO problem with other sites, just MSN!

  Any ideas?

  I installed Google Chrome and this has solved the problem.

• Cannot read the new videos on my laptop which uses Windows Vista. Help?

  Hi, two days ago I did something to erase my ability to play videos on American sites and I think it has something to do with Adober Flash Player. If I try to play a video on CNN, MSNBC, etc. of the New York Times, I get a message to install Adobe. When I try to do, I'll get to 50% and the program stops and asks me to stop internet which I do not know how to do. Can someone out there please try to help me?

  Furthermore, I have no problem playing the videos on the German press sites.

  Thans,

  John

  Hi John,.

  Have you tried all of the steps provided for in article Uninstall Flash Player | Windows?

  You can try to reboot the system and see if you can uninstall Flash player.

  You can also try to disable all the associated Adobe add ons in Internet Explorer and check to see if you can uninstall it.

  a. open Internet Explorer, click Tools and then click Manage Add-ons.

  b. under Show, click all add-ons.

  c. click Adobe add ons and select Disable