Problem updating iDRAC and LC on Poweredge R710

Hello

I am facing problems updating one of our Poweredge R710 (all others worked like a charm). Using OME I could install almost all day, but iDRAC (Firmware 1.10--> 1.95) updates and controller of lifecycle (application 0--> 1.6.0.73) will not be successfully completed.

OME to ESM_Firmware_CMDN0_WN32_1.95_A00 error message. EXE: "performance operation exceeded a specified time-out period. The update has not completed; You must restart your system and try again. "(even after several server restarts the message is always the same).

Error message in OME for lifecycle - Controller_Application_GFFFC_WN32_1.6.0.73_A00. EXE: "update failed: failed to secure copy - the secure copy function has failed.

When starting the server "Update Services system requirements" is shown in the upper right of the bootscreen. I've tried ressetting iDRAC (Ctrl + E at the start), turn off the server for 30 minutes (cable unplugged, replugged, waited 5 minutes, powered by the server) update system Build & Update Utility thorugh with SUU 7.3.1 and finally using the CentOS OM 7.3 Live DVD. None of this has worked successfully and I have no more ideas. Maybe someone has a?

Here are the necessary links. Fires within the OS.

DRAC - http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/poweredge-r710?driverId=63KCR&osCode=WS8R2&fileId=3287900761&languageCode=en&categoryId=ES#

Then run this, it is a set of lifecycle controller repair. http://www.Dell.com/support/drivers/us/en/19/DriverDetails/product/PowerEdge-R710?driverId=8F07J&osCode=WS8R2&FILEID=2731110409&LanguageCode=en&CategoryID=SV

Then update the LC with this - http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/poweredge-r710?driverId=F0D50&osCode=WS8R2&fileId=2984894513&languageCode=en&categoryId=SV#

Tags: Dell Servers

Similar Questions

  • Problem update illustrator and design U44M1I210

    Hi I have a problem I can't update the software CC illustrator and inDesign CC en always gives me this error code U44M1I210 here thanks

    http://helpx.Adobe.com/Creative-Suite/KB/error-u44m1i210-installing-updates-CCM.html

  • I'm having a lot of problems with firefox and cannot figure out how to get help. It all started when I updated to 13. I get all kinds of advertising popups, I can't play a

    I'm having a lot of problems with firefox and cannot figure out how to get help. It all started when I updated to 13. I get all kinds of advertising popups, I can't play a game on FaceBook called Farm Town at all, and I get a popup of AVG on the cookies that I can't get rid of. These issues are causing me to use Chrome quite often, although I like Fox better. I've searched and searched how to get help and find nothing. How can I get personalized technical help? These problems will not occur in Chrome at all. Thank you.

    Do a check with some malware malware, analysis of programs on the Windows computer.

    You need to scan with all programs, because each program detects a different malicious program.

    Make sure that you update each program to get the latest version of their databases before scanning.

    Alternatively, you can write a check for an infection rootkit TDSSKiller.

    See also:

  • Automatic update arrived and installed himself, but then told me that it was incompatible with my Mac version: 10.5.8. Firefox version 3.6.26 is now about it. It seems to work even. Y at - it's going to be a problem or should I ignore this message?

    Automatic update arrived and installed himself, but then told me that it was incompatible with my Mac version: 10.5.8. Firefox version 3.6.26 is now about it. It seems to work even. Y at - it's going to be a problem or should I ignore this message?
    If I need to can replace it where I get an older version?
    Thank you

    Firefox 4 versions and later, do not run on a PowerPC Mac and require at least OS X 10.5 and an Intel Mac.

    The latest support for your operating system version is 3.6.26 , you are fully updated.

    For more information, see:

    Firefox 3.6 system requirements

    Firefox 10 system requirements

    [For older Mac that are not supported in versions of Firefox 4 +, if you want, try TenFourFox for PowerPC currently running Mac 10.4.11 and 10.5.8]

    http://www.floodgap.com/software/tenfourfox/

    http://tenfourfox.blogspot.com/

    https://code.Google.com/p/tenfourfox/wiki/PluginsNoLongerSupported

    Thank you

    Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

  • How to install this update and resolve problems of USB and the touchpad?

    I Equium M50 (59th) and am bitten by an update that pulled my touchpad and keyboard. I did the new installation of XP Home and have all updated drivers and everything goes well. The last update, what I can't understand is for
    Ana _2005_10_24_V1.2 driver is for, Standard Open HCD USB Host Controller... X 2 .........

    The update addresses all kinds of questions like I'm having and is an update recommended driver detective, I use offten.

    The problem is that it says uninstall the drivers for the i have installed already and when I do it it hits off my USB mouse me leaving no able to install the new. When I reboot it installs those I don't want not reinstalled.

    This is the read me, off the coast of the new update and really I don't understand to underdstand what to do... .so here it is?
    Driver revision history:
    Twinhan VP704A Driver Release Notes
    -------------------------------------------------------------------------------
    Note:
    1. in the event that the system hangs when running with VP704A, please install ULI
    Host USB 2.0 in \ULiUSB20Driver driver

    2. for XP/SP1, please update with the patch in

    3. in XP/SP1, update driver will crash the system, while the new facility is ok.
    The trick to update driver XP/SP1 is illustrated in the following steps,
    a. uninstall the driver
    b. disconnect and reconnect the USB device
    c. install the driver
    4 to support the controller remotely, please launch Agent.exe in \Agent.
    Further details at \Agent\Readme.txt

    Known issues:
    1 multi-instance is not supported
    2 remote wakeup is not supported
    3. strong use of the processor from analog video/audio capture
    4. bad Signal using color YUY2 format IST
    5 AV sync if audio captured the wrong filter.
    (Difficulty: use the filter "USB Audio Device" in the flow WDM capture device)
    6. noise with analog TV and FM Radio
    (Difficulty: use the filter "USB Audio Device" in the flow WDM capture device)

    Driver revision history:
    -------------------------------------------------------------------------------
    2005-10-24, version: 1.0.2.8
    Bugs fixed and new features:
    1 is not correctly configured.
    -------------------------------------------------------------------------------
    2005-10-21, version: 1.0.2.7
    Bugs fixed and new features:
    1. the firmware version read FLASH OK!
    -------------------------------------------------------------------------------
    2005-10-14, version: 1.0.2.6
    Bugs fixed and new features:
    1.MUtil - access driver empty part lower part of screen when IST!
    2.MUtil - access HCT pilot check fix crash!
    -------------------------------------------------------------------------------
    2005-10-07, version: 1.0.2.5
    Bugs fixed and new features:
    1 tuner turns off when S-Video, Composite.
    -------------------------------------------------------------------------------
    30/09/2005, version: 1.0.2.4
    Bugs fixed and new features:
    1.agent.exe update for repeat bug!
    2.TI5150 sign up to fix video Format!
    -------------------------------------------------------------------------------
    2005-09-29, version: 1.0.2.3
    Bugs fixed and new features:
    1.A pilot of the trial build for multiple access medium. (in the folder "\Multi-Access")
    Note: The filter 'Audio device USB' provided by the system does not support mutil-access.
    2 reset TI5150 when a new frequency is defined
    -------------------------------------------------------------------------------
    2005-09-27, version: 1.0.2.2
    Bugs fixed and new features:
    1. difficulty I2C unstable access on some devices.
    -------------------------------------------------------------------------------
    2005-09-23, version: 1.0.2.1
    Bugs fixed and new features:
    1. analog TV becomes sometimes darker.
    -------------------------------------------------------------------------------
    15/09/2005, version: 1.0.2.0
    Bugs fixed and new features:
    1. difficulty of installation INF for Windows 2000.
    2 FM scan radio policy changed!
    -------------------------------------------------------------------------------
    13/09/2005, version: 1.0.1.9
    Bugs fixed and new features:
    1 USB string serial number not visible with USBView, updated firmware required.
    2. political analysis of FM radio, return of release if PLLOffset > = 9 x 12. 5 kHz
    -------------------------------------------------------------------------------
    13/09/2005, version: 1.0.1.8
    Bugs fixed and new features:
    1. after the passage between AV/D/A several times, video display becomes dark in THDTV 2.61
    -------------------------------------------------------------------------------
    12/09/2005, version: 1.0.1.7
    Bugs fixed and new features:
    1. improve the performance of check channel lock status
    2 pinnacle INF Fix.
    -------------------------------------------------------------------------------
    2005-09-09, version: 1.0.1.6
    Bugs fixed and new features:
    1. Add an audio initialization function.
    -------------------------------------------------------------------------------
    2005-08-31, version: 1.0.1.5
    Bugs fixed and new features:
    1 separation of PAL and NTSC resolution mode.
    -------------------------------------------------------------------------------
    2005-08-30, version: 1.0.1.4
    Bugs fixed and new features:
    1.AvgTimePerFrame.
    2 frame drop.
    3 pinnacle inf file HCT chkinf fail.
    -------------------------------------------------------------------------------
    2005-08-22, version: version 1.0.1.3
    Bugs fixed and new features:
    1. add remote control interface in digital source filter.
    2.A new remote test tool that contains of the source code in \Test_RC.
    -------------------------------------------------------------------------------
    2005-08-16, version: 1.0.1.2
    Bugs fixed and new features:
    1. Pinnacel & Twinhan driver & file reorg.
    2.VP704A_BDA_Test tool, add a test to the system code.
    3. set the standard infrared protocol of "IRSTANDARD", "IRSYSCODECHECK1" registry keys in the INF file.
    4 firmware update
    -------------------------------------------------------------------------------
    2005-08-15, version: 1.0.1.1
    Bugs fixed and new features:
    1 serial number feature is lost when the audio volume of the TV control
    2.RC6A support CIR
    (This firmware uses GPIO3 (M9207 pin 80) to decode the RC6 Protocol.
    The material must be reworked to connect the M9207 80 pin to the CIR module and the actual
    EEPROM must be flashed with \Firmware\M9207.bin)
    3 Serieal, MAC address and name of device OEM taken in charge.
    Please see for more details on the \Firmware\readme.txt.
    4 Ioclt example source code included.
    -------------------------------------------------------------------------------
    08/08/2005, version: 1.0.0.10
    Bugs fixed and new features:
    1. increase audio volume analog TV.
    -------------------------------------------------------------------------------
    04/08/2005, version: 1.0.0.9
    Bugs fixed and new features:
    1. analog TV Video mode failed.
    -------------------------------------------------------------------------------
    2005-08-03, version: 1.0.0.8
    Bugs fixed and new features:
    1.off - centerf frequency scan + / 125Khz
    2 difficulty program a copy scanned in MCE.
    -------------------------------------------------------------------------------
    02/08/2005, version: 1.0.0.7
    Bugs fixed and new features:
    1.THBDAConsole.exe 'ulFixedBW', 'ulDisableOffFreqScan', 'ulMCEFreqTranslate' bug
    -------------------------------------------------------------------------------
    2005-07-28, version: 1.0.0.6
    Bugs fixed and new features:
    1.THBDAConsole.exe 'ulFixedBW', 'ulDisableOffFreqScan', 'ulMCEFreqTranslate' support
    2. improve the stability of I2C communication.
    3 unify signaling resistance & quality as a THBda ioctl interface.
    4 capture filter lock state control.
    -------------------------------------------------------------------------------
    2005-07-28, version: 1.0.0.5
    Bugs fixed and new features:
    1. the same strength & quality signals as VP7046.
    2 debug build pilot
    -------------------------------------------------------------------------------
    2005-07-21, version: 1.0.0.4
    Bugs fixed and new features:
    1. put the INF update.
    -------------------------------------------------------------------------------
    2005-07-20, version: 1.0.0.3
    Bugs fixed and new features:
    1 improve performance in PCM4
    2 passage of the analog TV Mode to FM Mode failure
    -------------------------------------------------------------------------------
    2005-07-04, version: 1.0.0.2
    Bugs fixed and new features:
    1. production tool FM test OK!
    --------------------------------------------

    And here is the Readme file from the other file in the update?

    ************************************************** ************************************************
    ULi PCI to USB Enhanced Host Controller Driver V1.72 for Windows 98 SE, Windows ME, Windows 2000 and Windows XP
    ************************************************** ************************************************

    ----------------
    INTRODUCTION
    ----------------

    This driver supports the host EHCI ULi controller under Windows 98 SE, Windows ME, Windows 2000
    and Windows XP.

    -------------------------
    CONTENTS OF THIS DOCUMENT
    -------------------------

    1. installation instructions
    2. uninstall instructions

    ----------------------------
    1. installation instructions
    ----------------------------

    (Windows 98SE & Windows ME)
    ULi USB 2.0 Controller has strapped on the system
    1. install the driver USB 2.0 ULi
    -Run the Setup program.
    -This program will copy the driver files in your Windows system, and then restart your computer.
    2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
    Host Controller"and install the driver.

    B.If any ULi USB 2.0 on the system controller
    1. install the driver USB 2.0 ULi
    -Run the Setup program.
    -This program will copy the driver files to your Windows system, then turn off your computer.
    -Fix the ULi USB 2.0 computer controller card and restart your computer.
    2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
    Host Controller"and install the driver.

    (Windows 2000)
    ULi USB 2.0 Controller has strapped on the system
    1. install the driver USB 2.0 ULi
    -Run the Setup program.
    -This program will install and load the driver and you do not have to restart the
    computer.
    B.If any ULi USB 2.0 on the system controller
    1. install the driver USB 2.0 ULi
    -Run the Setup program.
    -This program will copy the driver in your Windows system files, before turning itself off
    your computer.
    -Fix the ULi USB 2.0 computer controller card and restart your computer.
    2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
    Host Controller"and install the driver.

    (Windows XP)
    ULi USB 2.0 Controller has strapped on the system
    1. install the driver USB 2.0 ULi
    -Run the Setup program.
    -Click "NEXT".
    -This program will install and load the driver and you do not have to restart the
    computer.
    -Once install the driver ULi USB 2.0 successfully. System will detect "USB 2.0 Root '.
    Hub. " Please select "Install the software automatically (recommended)" and then
    Click 'Next' to continue the installation.
    -This program will install and load the driver and you do not have to restart the
    computer.
    B.If any ULi USB 2.0 on the system controller
    1. install the driver USB 2.0 ULi
    -Run the Setup program.
    -This program will copy the driver in your Windows system files, before turning itself off
    your computer.
    -Fix the ULi USB 2.0 computer controller card and restart your computer.
    2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
    Host Controller', proceed with the installation.
    -Once install the driver ULi USB 2.0 successfully. System will detect "USB 2.0 Root '.
    Hub. " Please select "Install the software automatically (recommended)" and then
    Click 'Next' to continue the installation.

    Notice:
    If you can not configure driver successfully. Please restart your system, then follow
    steps to reinstall driver above.

    ------------------------------
    2. uninstall instructions
    ------------------------------

    1. open the "Control Panel" folder.
    2 call the "Add/Remove Programs" icon
    3 choose the "ULi USB2.0 Driver" section.
    4. click on the "add/delete" button to remove drivers.

    -----------------------------------
    Change list:
    -----------------------------------
    1.74
    1 fix this multi-interface keyboard may not be detected on the USB 2.0 hub.
    2. support all USB2.0 Host Controller.
    1.73
    1 problem on Win98SE, blue screen when you unplug a USB 2.0 Scanner after scanning image.
    2 solve problem on Win98SE, blue screen when you unplug a few Scanner USB 2.0 USB 2.0 Hub after scanning image.
    3 fix on Win98SE, blue screen when copying of files through the hub of UH-204 SUNBOX.
    4 solve problem as wirless lan will disconect when the plug in usb device.

    1.72
    1 fix that system crash when HD USB copy large files.

    1.71
    1. improve the management of power in Win98 / Me.

    1.70
    1. improve the devcie detection function.

    1.62
    1 solve the problem that can not operate a USB HUB USB 2.0 disk when the system resume inactive.

    1.61
    1 solve the problem that some device under USB 2.0 HUB is not found if resumes suspension system.

    1.60
    1. in support of functions power management when a HUB with the USB plug in device
    a root HUB.

    1.57
    1. Fix USB with USB 2.0 HUB floppy cannot detect problem.
    2. fix audio problem that can not display smooth when peripheral USB connect to the system.
    3. fix system cannot detect DVICE USB when the USB device attached to the system in
    suspend mode.
    4 fix when root USB HUB have a full load, USB HD sometimes
    failure of the transaction.

    1.56
    1 fix that device of DVD decoder cannot display correctly.

    1.55
    1. fix OTI USB 2.0 drive hand cannot detect question.
    2. attach the USB mouse cannot be used after the resumption of hanging.

    1.54
    1. to improve the safety of the driver.

    1.53
    1. transfer bulk fix may stop if the USB device is connected to the USB 2.0 hub
    2 difficulty USB 2.0 mass storage device cannot access after the release of the standby mode if there is an another USB 1.1 existing device

    1.52
    1 correct fault of system pages when accessing the storage of mass Win98SE or scandisk device failure when selecting
    automatically fix file system errors
    2. fix system may hang on in Win98SE / ME if USB 2.0 cardbus card is plugged

    v.1.51
    1. to improve the compatibility of USB 2.0 card reader.
    2. fix USB IDE devices are not accessible after the release of the standby/hibernation mode.

    v1.50
    1. improve the transfer block

    v1.48
    1. difficulty of installation of the USB 2.0 LAN driver hangs up
    2. attach a USB 1.1 card reader cannot be identified when plugged into the USB 2.0 hub
    3. fix some laptops starting hanging Win98SE

    v1.47
    1. improve the performance of bulk transfer.
    2. fix the failure of USB 2.0 Preview in bulk webcam.

    v1.46
    1. support USB 2.0 and 1.1 devices isochronous
    2. fix system hang up when restarting system if the USB 2.0 host controller is disabled in Win9X / ME
    3. fix system hang up when you uninstall the driver if there is USB 2.0 connected under Win2K/XP devices
    4. improve the capacity of the device detection in Win9X / ME

    v1.45
    1. fix system hang up when the mode standby ACPI.
    2. attach the mouse sometimes does not disappear when it is unplugged.
    3. fix the failure of detection of composite devices Win9X and improve device composite Win2K/XP

    v1.44
    1. composite crutch
    2 improve the detection of devices

    v1.43
    1 improve the failure rate of transfer IDE read/write with USB 2.0 to IDE bridge on the platform of PC card
    2 difficulty at high peripheral speed detected as full-speed device
    3. fix some problem of failure detection USB mouses
    4. fix some problem USB 2.0 Hub failure detection
    5 difficulty Win98SE crashing if ULi EHCI 1.42 is installed

    v1.42
    1. fix PC Card eject hang up in Win98 / ME
    2 difficulty of interruption/resumption hang up in Win98
    3 sometimes solve USB 1.1 device cannot be detected if OS starts with USB 2.0 and 1.1 devices plugged
    4. fix some failure detection of PC Card USB 1.1 devices

    v1.41
    1. Add new feature that system can install the driver ahead of the device is plugged in.
    2. fix PCMCIA OHCI controller resources affect problem on Windos ME.

    v1.40
    1. support Win9X/ME / 2 K/XP with ULi USB 2.0 driver.
    2 fix PCMCIA EHCI controller detection device USB 2.0 problem in Win9X / me.

    v1.32
    1. Fix problem that pilot cannot detect the Microsoft driver in Windows XP
    If the path of the OS is not c:\windows.
    2. Fix problem that pilot cannot detect the USB 2.0 controller device in a system.

    v1.31
    1. Fix problem that driver cannot install on Windows 2000.

    v1.30
    1 fix than Win9X / shows ME no USB 2.0 hub.
    2 solve the problem that hang up when the second entry in Win9X S1 with HID device connected.
    3 Fix problem that sometimes when you click on "search the hardware changes.
    for PNP ULi USB2.0, controller, the system will inform you the usbehci.sys
    file is not found.
    4. Fix problem that v1.20 can't find no EHCI controller to install the driver for after different
    verison of ULi EHCI controllers devices are connected and disconnected.
    5 install the driver support for several features of controller EHCI ULi existing on
    system at the same time.
    6. determine Win2K/XP shows hub USB root for USB 2.0 hub.

    v1.20
    1. support ULi USB 2.0 for Windows 98SE/ME/2000/XP host controller driver.

    ULi Coporation. (ULi) web sites:
    http://www.Uli.com.tw/ (Taiwan)

    CAN SOMEONE TREAT ME LIKE A CHILD OF TWO YEARS AND GIVE SOME ADVICE AS TO HOW TO OBTAIN THIS UPDATE.

    I'D VERY GRATEFULL AND KIND OF THINK IT would BE BENEFICIAL to a LOT MORE than PEOPLE LIKE I SEE a LOT OF XP AND PROBLEMS OF THE KIND THIS UPDATE IS SUPPOSE to FIX.

    It is said above 2 relevant and 1 right ANSWER available...

    I'm new here, so anyone could direct me to these answers?

  • Problems installing Office 2007 updates KB2289158 and KB2413381 for Windows 7 64-bit

    Original title: KB2289158, KB2413381 for Windows 7 64-bit updates

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    My automatic update for Windows 7 64 bit does not work for updates KB2289158 and 2413381 KB. It has already happened with some other updates, and then Windows seems to add an update to fix the problem?

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hi trojan.

    1. This only happens with the Office updates?

    2. you receive all of the error codes or error messages?

    3 have you tried to install the stand-alone packages updates?

    Step 1:

    You try to run the troubleshooter Windows 7 update and check.

    Open the Windows Update troubleshooting tool

    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

    Step 2:

    Also try to install the updates and check manually.

    To download updates, follow these steps:

    a. download updates from the Microsoft download Center:

    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=be0c5878-60c0-4700-8836-50d369b51d04

    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=df826b79-7398-45de-943C-6f6f0af1b4e3

    b. double-click on the downloaded file.

    d. you can either click Run to start the installation or you can click on save and save it on the desktop and run the installation once the update is completely downloaded.

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • I can't update anything and I am at a loss about how to solve this problem.

    I'm running on Windows vista SP1. (I know there is a SP2, but can't get it)

    If I try to update via windows update I get an error: Code 80240016. If I try manually when I get to the posting form, I can not get this page to load, I get another error. Also I can't get updates from Toshiba. I have a great internet connection, update is the only thing that does not work. I recently lost the ability to play music from itunes, but the player still works, so I know this isn't a sound problem. I've had the computer for a little over a year now and it started about a month ago and so far windows customer service isn't being helpful. I tried a number of patches online, but none work, can anyone help me? What could be to keep me update Windows and Toshiba? Also, I tried disabling all firewall that I know I have, and that doesn't always.

    0 x 80240016 is to "try to install so that another installation happens or reboot is pending"

    Windows Vista and Windows Server 2008 follow these steps:

    1. Close the browser Windows Update or Microsoft Update Windows.
    2. Click Start , type command prompt, in the list of results, right-click guest, and then click run as administrator.
      If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    3. Type the following commands. Press ENTER after each command:
      net stop wuauserv
      net start wuauserv
    4. Close the command prompt window.
    5. Try to install updates again.

    http://support.Microsoft.com/default.aspx/KB/957307

    TaurArian [MVP] 2005-2010 - Update Services

  • Update of Windows Vista Home Premium fails to install updates KB2533523 and KB2468871 which I think that the problem is solved, how should I try to reinstall these

    In windows update, again and again, updates KB2533523 and KB2468871 could not be updated.  I "think" I can have solved the problem, but how do I try to reinstall these, now that I think that the problem is resolved.

    Do you Google? -Online http://tinyurl.com/3onrw2c

  • Problem with KB28083821 and KB2855336 updates

    When Microsoft will challenge updates KB28083821 and KB2855336 so that they will not install on Windows 8. Have you tried many times to install and have failed since the first day on two different machines? In addition, Microsoft FIXIT is never available and works with Windows *?

    I have similar problem - Windows Update does not pass the 45% downloading KB2855336. For each batch of updates, there are 1-2 updates Windows Update can not download completely. I tried the steps above (method 1), but they did not solve the problem. I use Windows 2012. I had no such problem with Windows 2008 or Windows 2003.

    The troubleshooting link is a waste of time:
    Have you tried to install the update manually?
    No, because I want to know why I always need to do this for 1-2 updates each batch of updates.

    Is there enough free space on your PC?
    Yes it is.

    There are mistakes that are just a matter of bad timing, and they can be caused by busy websites or Internet connections or a number of other factors.
    The download of KB2855336, which is 83KO, always stops at 45%.

  • I have a Mac. My creative cloud will not update. Whenever I try to open photoshop its immediately blocked. Then the update appears and freezes.  I had the problem concerns the month

    I have a Mac. My creative cloud will not update. Whenever I try to open photoshop its immediately blocked. Then the update appears and freezes.  I had the problem concerns the month.

    Hello

    Please remove Creative Cloud app and Adobe Application manager using the-

    Install the cloud creative app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

  • VMware converter 5.5 Update 1 and target host is 5.0.0 - is a known problem observed during execution of this?

    I intend to use vmware converter 5.5 update 1 and target host is 5.0.0.

    someone can confirm if there is any known problem observed during execution, it is?

    Welcome to the community,

    According to the Matrices of the interoperability of products VMware Converter 5.5 supports ESXi 4.0 and versions later, you shouldn't have issues related to the ESXi version you are using.

    André

  • We have updated cc2015 and when we try to open the program we continue to get the message a problem cause the blocking of the work programme

    We have updated cc2015 and when we try to open the program we are still getting the following message is displayed: a problem cause the blocking of the work programme

    Windows will close and try to find a solution, I use windows 7.

    Thank you

    Tony

    reset your preferences-

    Acrobat: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html

    Adobe media encoder: https://forums.adobe.com/thread/1713540

    Legacy: http://helpx.adobe.com/after-effects/using/preferences.html

    Bridge: https://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html

    Dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html

    Flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html

    Illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html

    InDesign: https://forums.adobe.com/thread/526990

    Lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html

    Muse (mac): https://forums.adobe.com/thread/1246022?tstart=0

    Photoshop: https://forums.adobe.com/thread/375776

    Photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm

    elements of first: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html

    First pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html

  • new pc with windows 8.1, and no downloaded installed cs5, no problem open deck and cs5, but cannot read the raw file, try to update, cannot complete or update failed, please help

    new pc with windows 8.1, and no downloaded installed cs5, no problem open deck and cs5, but cannot read the raw file, try to update, cannot complete or update failed, please help

    Looks like you have somehow the mac version.

    Download the updated windows 6.7 camera raw from this link:

    Adobe - Photoshop: for Windows: Camera Raw 6.7 update

  • PowerEdge R710 and perc h700, disc not visible in OS

    Hey,.

    We have PowerEdge R710 with perc h700 raid 5 controller physical drives under raid6 running. We have recently added a sixth of the road which is much smaller (512 against 4 TBS) we want to just format and use it as a normal drive in the OS (Ubuntu 12.04.5).

    However, the drive is not visible in the operating system. When you enter the settings of the RAID controller that it says that the drive is READY but not configured and all the options to the title of operations are grayed out. How can we make this hard drive is visible in the operating system?

    See you soon

    The H700 does NOT support non RAID, so all records first must be configured on the controller, before its presentation to the BONE. You must configure (initialize) as a single drive RAID 0.

  • PowerEdge R710, the problem with RAM

    Hello!

    On our server, 'PowerEdge R710' fails to increase the amount of RAM. On the motherboard there are 18 slots for RAM, 6 black and white 12. We bought 18 modules of memory 16 gigabytes of each. However, the memory ran in the white slots. In the description of the server on your company's Russian website indicates that the server supports up to 192 GB of RAM. The English language description of the server page says that he accepts 288 gigabytes of RAM. We are always able to put only 96 gigabytes, which we do not like it absolutely. Maybe we are doing something wrong. Tell me, how much RAM you can place on this server and how to do it correctly?

    Hello

    What you need to do, it's actually install memory in A1, A2, A3, A4, A5, A6 and B1, B2, B3, B4, B5, B6 - 6 free slots you but this should allow you to install 192 GB.

Maybe you are looking for

  • 1 home 2 wifi networks

    I just added an ethernet cable from my modem and run the floor and attached to an airport express. I feel that I cannot expand my wifi network at the bottom and have created a new network on the floor. Now, these two areas have wifi under the 2 netwo

  • HP Envy m6: m6 HP Envy broken hinge

    Hello I'm having this problem as well of the right hinge cracked came out of nowhere, and now the left seems to be cracking. I have no idea on how to fix this and even impossible to close the laptop without the risk of damaging it. I'm not able to ta

  • Apple Store is not up-to-day - network connection lost

    Hello I have a MacBook Pro with OS X El Capitan installed and allows you to connect to the Bank of the United States, where I bought the laptop. I moved to the New Zealand a few months ago and changed the NZ store, and for the last two weeks that I'm

  • Misleading iOS keyboards Vertical/Horizontal (iPhone6/iOS9.2

    I recently spent an iPhone6 (from 5) and noticed (probably a change that I have not noticed before and may not check more) a light but extremely annoying difference in the configuration of the keyboard when you use the phone vertically or horizontall

  • Satellite 2450-101-ide #0 error appears

    Hello I've been everywhere looking for an answer to my perhaps problem you guys here can help me. Im getting an ide #0 error when I start my laptop, essentially the original hard drive has become defective, I had to keep reinstalling windows on it be