Problem upgraiding new iOs Version

Similar Questions

• New Ios version 9.3 isn´t shown after decommissioning

  Well, after I upgraded to ios 9.3, I decieded to downgrade to 9.2.1 back again. I did a backup before. But after the downgrade 9.2.1 apple told me that this version of backup is not compatible. I tried to rewrite the text doc in the apple backup file as described on the internet, but it did not work. So I tried to upgrade to ios 9.3 to make a completed backup. But now my iphone and itunes show me that ios 9.2.1 is already the latest version of ios. So I downloaded the ipsw ios 9.3. But when I try to do with ipsw ios 9.3, there is always an error with the code 3194. I searched the Internet and found something. He told me to do something with the hosts. After that I did something from nothing happened and the error is still there. So, what should I do? I Don t want to lose all my files backed up apps and so. Would really appreciate if someone could help me.  I'm sorry for the bad English German.

  OK, it's fixed now.

• Problem with GRE over IPsec with IOS Version 15.1 (2) T4

  Hello

  We have several sites that use of GRE Tunnels with card crypto for encryption.  To upgrade to the latest version of a UC-520 (15.1 (2) T4 or any version of this train) I get the following error: -.

  SIN-UC520(config-if) #crypto map aberdeen

  % NOTE: crypto card is configured on the tunnel interface.

  Currently, only one card encryption GDOI is supported on the tunnel interface.

  The original Tunnel config is below:-

  interface Tunnel0

  Description Tunnel to Aberdeen AC

  bandwidth of 512

  IP unnumbered Vlan1

  IP mtu 1420

  QoS before filing

  tunnel source a.b.c.d

  destination e.f.g.h tunnel

  Crypto map aberdeen

  Decommissioning of the IOS version solves the problem.   What gives?  Have Cisco dropped support for this configuration?

  I use this setup so I can choose exactly which traffic is encrypted (I do not encrypt voice for example).

  Thank you
  Peter.

  Hi Peter,.

  It looks like from the 15.1 this configuration is no longer supported. Here's what the release notes:

  Error message appears when you try to apply the tunnel interface to a card encryption.

  Old behavior: Error Message is not displayed when you try to apply tunnel interface card encryption using the command card crypto (interface IPSec).

  New behavior: an error message appears when you try to apply the tunnel interface to a crypto map using the

  crypto map command (interface IPSec).

  http://www.Cisco.com/en/us/docs/iOS/15_1/release/notes/151TNEWF.html

  The order reference has the following information about the error message:

  

  A card encryption cannot be applied to a tunnel interface. If you try to apply the tunnel interface to a card encryption, an error message is displayed as follows: crypto card is configured on the tunnel interface. Currently, only card crypto Group domain of interpretation (GDOI) is supported on the tunnel interface.

  http://www.Cisco.com/en/us/docs/iOS/Security/command/reference/sec_c4.html#wp1078283

  So it seems that on the new version, you can only use one (new to me) maps crypto GDOI on your tunnel interfaces.

  Here's a doc that explains the GDOI implementation, I wish that I could help with the Setup, but as I said, I had not heard of him until today.

  http://www.Cisco.com/en/us/prod/collateral/iosswrel/ps6537/ps6586/ps6660/ps6811/prod_white_paper0900aecd804c363f.html

  I hope this clarifies your questions.

  Raga

• Update Verizon iPhone 5 new IOS 10 problem: cannot receive/send calls. Shop Verizon says it's an update causing Apple to popular phones to crash all day. Any input or advice, please?

  Update Verizon iPhone 5 new IOS 10 problem: I can't receive/send calls. The store Verizon says it's phones a popular causing update Apple crash all day. Any input or advice, please?

  Don't you say no service at the top?

• buy the new iphone and IOS version questions

  Hello

  am about to buy a new iphone and you're wondering how to find which exact version of IOS a. sellers say its IOS is 9, well no, I want to know the version of it as if its 9.0.2 or 9.1 something like that. is it far from finding in his series on the box? I don't want to buy the iphone and do not know how to check. Help, please.

  Hello

  don't worry abt the IOS version, after having bought the phone, you can update to the latest IOS 9.3 by yourself... See you soon.

• How to get the new iOS Go makes a loop in your Mac

  I was wondering why the new Go for iOS great new loops were not available after you import for mac via iCloud. You would think that these sounds would be also available on the Mac side, but they were not. So, when you import your song, you get a message like this...

  

  Then, when you press on continue you get this message...

  

  Then you download directly? But after waiting for the download, you realize that these sounds get on your Mac. At least for me they do not have. So if you want the solution bypass and a few new large loops, here's what you do...

  Download iOS GarageBand to iTunes. Once downloaded, search for garageband.ipa the .ipa's version of iOS... Locate and then right-click on it. Outdoors with a menu, you should see a green "archive utility". Click here. It will pull a garageband file. In the folder are all missing originals. Files of the CAF for your songs. You must then place them in the logical folder on your mac. Do another search for. COLLEGE. You will be directed to the area where you will include you news. Files of the CAF. There should be a few records in this area called House, Hip Hop, etc. Rather than attempt to index the myself, I just created a new folder called iOS and put all the files of the CAF that I extracted from the iOS version. Then I placed in the same directory where the others are located in logic on my Mac. I started to GB and low and behold, it worked! I got all the sounds that was missing. The only message I got that FX extension was missing. I found the FX extension also in iOS extracted folder. The problem is that I don't know where to put it again. I will figure out however.

  Good luck to all who wish to participate in it. Read my instructions...

  I really do not understand why Apple would come on such great point, give us the possibility of import to Mac, but not give us new sound files on State end sort of weird. Apple is really cool, but someone left dropped the ball on this one...

  Oh! I forgot to mention, once you check out this iOS GB file, you must go to > Payload > MobileGarageband > right click > view the contents of the package. There's all the goodies! Enjoy!

  It works like a charm. Thanks for this posting.

  I have download all purchases of the app store on my mac anyway, so GarageBand 2.1 was already in my iTunes with the mobile applications folder:

  ~/Music//iTunes/iTunes music/Mobile Applications / GarageBand 2.1.

  I had to search for GarageBand 2.1.ipa, not GarageBand.ipa.

  Inside the GarageBand application bundle is the path to the loop:

  GarageBand 2.1/Payload/MobileGarageBand.app/Library.bundle/Audio/Apple loops /, for example

  GarageBand loops/Abstract atmosphere 015 2.1/Payload/MobileGarageBand.app/Library.bundle/Audio/Apple. College

  While you are about it, you can also try to extract some sampler instruments, the Instrument library is here.

  I looked here sooner, because GarageBand 10.1 has not found instruments of the new Memo.app of music:

  The files of the sampler and sampler instruments are here:

  / GarageBand support at the libraries/Sampler 2.1/Payload/MobileGarageBand.app/Library.bundle/Application/Instrument.

  I found the lack of /GarageBand 2.1/Payload/MobileGarageBand.app/Library.bundle/Application support, library, Sampler, sampler Instrument Instruments / P - Bass iOS small.exs

• MacBook running Yosemite iOS version 10.10

  Hi, my new Macbook Air is the latest Yosemite iOS version 10.10 operating system. The system requirements for Lightroom 5 only go up to version 10.9. Can someone tell me if it will work OK?

  Thank you.

  Yes it works perfectly.

  Only two issues. Shadow is rendered to develop (already erred in OS X 10.9) (Lightroom 5: ICC cut profiles shadows under OSX) and if your network connection is slow, cards may not work properly (Lightroom: problem with the card in OS X 10.10 module (Yosemite)). So apart from the maps thing everything works as in 10.9

• Have just been told by BT that I need a new/different version of Thunderbird to work with the new system BTMail (previously BTYahooMail) - I do?

  I have btinternet email for years and Thunderbird for too long and have been happy with both. Unfortunately, I'm not technical enough to understand the majority of assistance or instructions on the information pages of support technique/Thunderbird, but haven't managed to get TB put in place in the first place (long time) and it seems to have worked well since. However, on Friday both of my accounts to BT (sets of two numbers), so two BT email addresses have been moved new old BT Yahoo mail BT mail. I was unable to connect to one of them, but the other was very good - I have had help 'screen sharing' a technical chap BT to sort. However, he was able to Conect Thunderbird with email servers. I said to BT and the chap tech tried to sort on screen sharing, but could not (and I have been unable to follow what he was doing). A few months ago, I made a few changes, as requested by BT, to allow for the transfer to go smoothly (!), but the man has changed some things Friday, I think, as well. He could not solve the problem of TB and I can't figure it out at all, and the Lady of BT Tech help to whom I spoke this morning (and who had managed to fix my problem of connection BTID, fortunately) had a look and suggested that maybe I needed an update/new/different version TB or 'another email address. Well, I really want to stay with Thunderbird and was hoping that someone here could explain it in simple English for me, please? I was wondering what will happen, assuming that I need to download an updated version / different, if I did this and then sort of re-installed my existing BT email addresses (as if I started again with Thunderbird)? I hope that there is someone here who can help you - thank you - I'm rather fond of this little blue bird. Thank you.

  Hi, Zenos, thank you so much for your help - I have now (touch wood) have my email back after following your instructions. If all goes well, it will remain in operation during my upgrade to infinity next week.
  Thank you for taking the time to answer my question a little disjointed.
  Had never heard of before critical path, I thought that BTMail was BT Oh, well, as long as it works I guess (I hope it's better than the Yahoo system).
  Thanks again.

• Stuttering bleutooth audio stream spotify on new IOS 9.3.1

  Since a few days I experienced some very annoying problems with streaming audio of Spotify on my bluetooth radio.

  The music guard stuttering and it's even worse when I use my iPhone at the same time, for example, when I'm listening to music and unlock my iPhone the music stutters. also when I do nothing at some point the music begins to stutter.

  before I had no problem at all and that I could do whatever I wanted with my iPhone and always listening to music without stuttering!

  I checked if the problem is on the other music applications like youtube and apple music streaming, but it seems to stutter only on Spotify...

  normally, I'd say it's just the fault of Spotify and I'll wait for a bug fix, but the strange thing is that the problems started when I got the new IOS.

  I tried with my old iphone 4 with IOS 8 and which works very well...

  Help, please

  Edit: I have already searched the forum of spotify and discovered that more users (ios 9) have the same problem...

  Have you ever force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again?

  You won't lose data, but force the reboot can cure some problems after installing new software or applications.

• I have an iphone 6 times and after the installation of new iOS 9.3 when I receive or make a call the person on the other end cannot hear me but I can hear them.  If I change speaker and then they are able to hear me.  Any help?

  I have an iPhone 6 plus and have upgraded to the new iOS 9.3 but now when you receive or calls the other person on the other end can't hear me. The only way to make this work is to allow the speaker.

  I power off, the hard reset, and this problem still exists.

  Can anyone help?

  Test your low microphone by going on record and taking a test recording.

  (When you put it on the loudspeaker, he uses the microphone before located next to the cylinder head box.)

• How is it with the new iOS 9.3 I can't send a video via iMessage?

  I have an iPhone 6 more with the new iOS 9.3 installed a few hours before. I have problems with sending video via iMessage. I have tried both directly through iMessage by tapping the (camera icon) to the left of the body of the text, this in turn, I select what video to send and somehow, it is not visible in the body of the conversation in iMessage.

  Then I tried to send a video through the iPhotos on my iPhone app 6 Plus. I then type the "selection" function in the upper right, I then select my video and the entrance after the contact data in the address bar, there is no button 'Send' on tap.

  Then I tried to send a video through the iPhotos on my iPhone app 6 Plus.

  iPhoto or Photos?   iPhoto is not compatible with the iOS 8 or newer. Have you tried to share the Photos.app?

  There are complications with the iOS 9.3 update. Apple is aware of them and be released hopefully soon a bug fix.

• IPhone 3g ios version: 4.2.1 Skype incompatible 4.0.1325.

  Skype is currently not available for the iphone 3g which is on ios version: 4.2.1 even Skype set at least ios 4.3 for the last update of Skype verion: 4.0.1325.

  Why Skype is no longer for an older iPhone or iphone 3 g on ios 4.2.1.

  It's really disgusting and disturbing my voice chat. Please, I ask Skype makes it also compatible with ios 4.2.1. because many users are on ios 4.2.1 they work through this problem. I hope so that you can understand our feelings on the issue. I'd appreciate your decision on this matter. I'm waiting for the positive and appreciated of the Skype team line. Thank you

  Hello comrades! I am happy to hear from you. Please download Skype below link for your compatible device. Please share your comments. Thank you

  Download link:

  http :/ / www. 4shared.com/zip/Ma9ANlmK/skype_for_older_ios_by_kami_ro.html

• iTunes says new ios was available, I was updated

  When I connected my iPhone to iTunes 6, he said that a new version of iOS is available (9.2.1). It's the iPhone

  was already on the latest version. I was wondering if this has happened to someone else. I "updated" iOS and

  everything seems fine.

  It's a new iOS 9.2.1 update.

  Taking care of a few issues including error 53.

• Why isn't R7000 Beta FW 1.0.5.60 (new beta version) on the NG servers?

  The new beta version of R700 is on Google Drive. Why?

  Who put it there and it is SAFE? The display, I guess ElaineM, the facilitator did but then again, why not on the 'normal NG site '?

  @IrvSp It is safe to download. In any case, it's now been changed.

  I would like to know if there is a problem in downloading.

• iOS version stuck in pending

  Hi guys,.

  Got a generation currently running and for some reason any iOS version has got stuck in the waiting state, I have no options that I can see for this stop or restart etc so im now stuck with a seemingly infinite waiting for build. Android etc. everything has worked for me and I did a successful build yesterday so not what is of course the question.

  Any suggestions on what I can do?

  
  Thank you

  Not much you can do. It's a server problem:

  Build PhoneGap Service State