Problem USB with Satellite P100-219

Similar Questions

• I found the solution for the problem of sound-acpi with Satellite P100-219

  Hello

  I found the solution for the problem of sound-acpi with Toshiba P100 (it works with P100-219 at least). I can provide the source modified and compiled table DSDT, but I would like to know if it is possible to get these changes in the next update of the BIOS?

  See you soon,.
  MIK

  Hi Mik

  As you know that it is not possible to find info on the next BIOS, especially if you want to have some information about the Linux operating system. Just wait and see if some forum users pointed out something on the subject.

• Cannot use Bluetooth USB Dongle with Satellite P100

  A few months ago, I bought a dongle Bluetooth USB of Marks & Spencers. He says it's a Bluetooth 2 product. When I put the dongle into the USB port I can see no problem with drivers & Bluetooth in my device manager but I am still not able to see Bluetooth anywhere else on the computer and my phone is unable to find t.

  I was not able to load the software which accompanies it as sound does not seem compatible with windows vista. My laptop is Satellite P100 - 160.

  Can someone please tell me what I am doing wrong & what do?

  Thank you.

  You must have at least version 5 of the Bluetooth stack in oder to use it with Vista. Please check your site to sellers of laptop computer for her.

• Sound and other issues with Satellite P100-277

  Hello dear...

  My English is not long but I hope you understand me...

  I have a laptop toshiba satellite P100-227 & Windows XP operating system.
  When I login to windows, the message on laptop display "cannot Access Volume Control!"
  I have no sound on my laptop. I reinstall my OS system, but I have the same problems.
  Please see this link, my screen of the device menager

  http://images29.fotosik.pl/163/6a31918c1b8998b1.jpg

  (kontroler sieci = network controller)

  I do not know how to install this 'network controller' and 'PCI device', and what is the problem with the sound?

  I was install all drivers for my laptop, the TOSHIBA Web page and when I install the audio drivers
  (sound-20071106151533) I get the message like "device setup error, no device found for this driver."

  Please tell me what is the problem? Help me

  Thank you

  Hello

  How long the problem exists? I mean, is that the sound worked before? And if so, what did he stop? Immediately or after you´ve installed software?
  Have you had Windows Vista installed first on your machine?

  A lot of questions for now: I need some answers. ;)

  Would appreciate to hear something from you, maybe we can solve your problem...

  Greetings

• Problem starting with Satellite A210-183

  Hi to you all.

  My name is Costis and I have a starting problem with my laptop. The laptop runs Vista and it was bought in November 2007.

  I have the following message:

  "Windows has encountered a problem communicating with a device attached to the computer.
  This error can be caused by unplugging a removable storage device, such as a hard drive or a cd-rom drive which is a failure.
  Make sure that all removable storage is properly connected, and then restart your computer.
  Status: 0x00000e9
  Info: An unexpected i/o error has occurred. "

  Can you help me how to do?

  Thanks in advance,
  COSTIS

  Hello

  What devices are connected to the machine? Some external HDD´s or DVD readers? Would be interesting to know because this error is caused mainly by external media/devices that are not properly connected to the laptop or a malfunction.

  I recommend to unplug everything from your machine and check if the error reappears. So I would suggest to backup all of your important data and retrieve the machine completely (maybe it s a related problem of the software).

  If that's not enough then come back and talk to us more this question.

  Welcome them

• Problem with graphic framerate with Satellite P100

  Hello

  I searched on several forums but I did not describe my problem as I have, well, I don't know that it is similar to the problems having the most with their Windows Vista and nvidia graphics cards. First heres my system

  Satellite p-100
  NVIDIA geforce go 7600
  2.0 ghz centrino duo
  blah blah blah

  in any case, I read that most of you have experienced whie playing games like Oblivion which it will play fine for a while then your framerate drops down and the graphics "stuttering".
  My experience has been that, I start to play a game, and what appears to be a random delay of my computer will crash and shut down.
  I then re - turn on the power and restart my computer.
  Sometimes, I feel a secondary accident during indexing turn it back on for the opening screen vista user, this will continue to happen until I have detach my power running and unplug/reonnect the battery. Then finally I can connect in Vista without crashing it.

  This problem has occurred on several games with games on high and low graphics settings, I tried these games so far: forgotten, Half life 2, Counter strike source and source of life even half 1.
  IT didn't happen while he was playing Microsoft Flight Simulator X and I have no idea why I can't turn the graphic way up on MSFSX, and I wouldn't be an accident.
  Someone has any ideas concerning this problem for other games.
  I've updated my graphic card drivers several times even tried rollign return and others, but nothing works.
  Any help greatly appreciated

  Hello

  I don't know if the post would be useful for you, but I guess that may be:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26256&MessageID=96185

  and in another thread, a similar problem was discussed:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=25094&MessageID=92107

  Just check it out and I hope that your problem should be solved.
  See you soon

• How to reset the BIOS to resolve a problem with Satellite P100 DVD burner

  Hello

  I'm trying to reset my cmos to solve a problem with my dvd writer.
  I tried to run an old game I own and which was protected by starforce and ran starforce nightmare with a made the device completely unusable.

  After much research, I heard to reset the cmos.
  I have treid through debugging and nothing happened. I really don't want to open the laptop and remove the cmos battery or leave it for a month until the battery runs.

  Y at - it advice on what I should do.

  Could you please put more details on the model of your laptop and you CD/DVD driver problem? This will be useful for other suggestions.

  To be honest I don t think any reset BIOS, the RCT battery remove, etc. is possible or could help you.
  Only the ASP would be able to remove the TCR battery (if necessary what I don t think), but would not reset the BIOS like on the desktop PC!

  I appreciate feedback

• Problem starting with Satellite C850-1FN

  Hi guys,.

  I have a portable Satellite C850-1FN which came with win 8. I want to install win 7 because I prefer to win 8. The problem is that I can not boot from the Cd/DVD drive or a usb bootable with win flash player 7. He always says no bootable media without any startup options, I choose from the menu of the bios. I even used an external cd/dvd drive, but still no boot disk and others not to mention that the internal hard drive.

  My Win 7 drive is ok, so is the USB bootable (tested on another machine).
  Any ideas?
  Thanks to the guys in advance.

  > My Win 7 drive is ok...
  You have the original installation disc of Microsoft or own creation?

• The BIOS 1.90 solves all problems USB on Satellite M30X?

  Hello

  A few months after buying my M30x, I bought an external USB HDD to 200 G. The drive kept just disappear during use, so I took over, but the repair shop said they found nothing wrong with it. How you introduced me what s, update the BIOS 1.90.

  In any case, after the upgrade everything seemed dandy for real,
  and the drive worked fine. Fast forward to where the 2006/2007
  I bought two more external drives, a 2.5 "160G and
  a 3.5 "500G. The 160G is back to the store because he kept
  display errors, but he did on other machines too, so I'm
  get a new one soon.

  Now, the 500G seems to work without problems and I did 200G of this already, but this week training started acting funny. First of all, I dual boot Win XP and openbsd. OpenBSD disk went all crazy and to attach and detach sometimes 48 times in a row... so I said okay, maybe a bug in their implementation of USB. I have run windows again (ugh) and start copying files autour just randomly and bam, the disk disappears, and I get a screen blue, followed by a quick restart...

  at this point, I looked around as if there is an another BIOS update because my sixth sense tells me, it is still not right with 1.90, cause 2 operating systems may not be bad so I'm very inclined to believe that he is not yet 100% correct.

  Someone has seen something similar?

  Hello

  As much I know Toshiba does not provide any information what has changed with the new versions of BIOS and as a result, you could try only update the BIOS version and hope

  The 500 GB HARD drive is great device HARD disk that needs a lot of power?
  USB ports for laptop contains 500mAh and if the device needs more power as 500mah that it of possible that external devices may not work properly.

  I m not an expert in openbsd, but you can disable the saving on the simple USB ports on Windows.
  You can also try to remove the USB ports in Device Manager and after new restart you windows should recognize the ports again.

• Problem webcam with satellite U300 - 151 Skype running

  Please can someone help. I just bought a satellite U300 151 and have found that the web cam is not working. I use Skype for my video over ip and all I see is a black screen.

  Someone at - it ideas.

  I'm not a grumpy, so please keep the simple answers.

  Thank you very much.
  Jean

  If you use the Vista operating system then a SP1 should fix this annoying problem.

  I also found this Toshiba document:

  [Integrated Webcam may not respond after wake computer from sleep state: 077 http://askiris.toshiba.com/ToshibaSupportSite/search.do;jsessionid=A42AE5A8B59DBDA1AB02F3FB5A11F? cmd = displayKC & docType = kc & externalId = 1924621xml & sliceId = & dialogid = 41219194 & stateId = 0% 200% 05 20412176]

  Maybe it helps if yes, let me know

• Satellite P100-219: LAN driver

  There is a problem with the "Network Driver" on the CD utilities & tools created from the HARD disk.
  Installation fails, probably due to an error of order, '' C:\Toshiba' is not recognized.

  In the folder Driver network, there are two subfolders:
  100LAN containing for WinXP: e100a325.inf (revision 1) and e100b325.inf (revision 3) 8255 x Intel drivers
  GLan: e1e5132. INF Intel (r) PRO/1000 Gigabit adapters,
  IAMT. INF 'Technology of Directors Active Intel (r) - KCS',
  iresol. INF "serial port driver" "Serenum filter driver.
  The records contain more files, but I see no installation instructions.

  The driver download page, the same files are available under LAN Driver from Intel and Toshiba, respectively.

  Recommendations on what to install and in what order?

  Hello

  First of all, you want to download and install the Chipset utility from the site. After that, you can install the rest and more any order. I recommend the installation of the graphic, audio, and lan-wifi-Bluetooth, then everything that is left. But don't forget, the Chipset utility is always the first to install.

• Problem HDMI with Satellite C850-175

  Hello

  My problem is that recently I bought projector Optoma GT750, unfortunately it doesen't work with my HDMI throught C850-175 (OS Win7 Home Premium 64) port. I have tryied all drivers Intel and Toshiba available for chart (Intel HD Graphics) but no luck there.

  The more anoing thing is that HDMI works with HDMI all equipped with TV I have tryied but will not work with projector Optoma GT750. It seams to be no communication at all when you use HDMI between the two. Not even a wink, I tryied many various HDMI cables including designated 1. 4 gold plated a HDCP-no luck there too.

  First of all ask, when using VGA port for conecting these two there is no problem at all for this to work, but I would like to use HDMI I don't need additional cables for sound.

  I hope that above is detailed enough for any tech minded to be able to determine what the problem is.

  I googled the problem and can not find a solution at all.

  Someone at - it had similar problems or maybe someone knows what it prevents these two see each other through HDMI?

  Thanks in advance

  I think it will be not easy to say why all this happens.
  Usually when you are using the TV and use the HDMI key combination FN will be there (the unit is detected).
  The same option is available when the projector is connected?

• Satellite P100-219: overheating after memory upgrade

  Hello guys,.

  I've recently upgraded to 4 GB RAM in my laptop, and he did it again.
  Computer laptop stops immediately after awhile. CPU or GPU gets really hot. Works fan CPU, GPU was not used intensely. Simple web browsing/cat/emailing.

  What becomes hot however is part to the left of the memory/wlan compartment. Is it possible that a chipset gets hot after just upgrade memory?
  I tested the memory with Memtest + for more than 3 hours. No errors.

  Moreover, the last time that my phone was in ASP it had returned with DMI saying it's Satellite L20! I dunno if that could be related...

  Thanks in advance for your suggestions,
  mentorek

  You have blown the dust anyway? As you say, maybe another component is overheating rather than the CPU or GPU. The CPU/GPU heatsink can be shared with other chips.

  Have you installed RAM high performance? His best choose RAM that has the same Timings CASE/RAS as the original factory of RAM.

  The name DMI does not cause something like this.

  PS. If you're running Vista, you must pass the BIOS and driver nVidia on the Toshiba site

• Port replicator does not work with Satellite P100-160 & Vista

  I just bought a Toshiba duplicator (part number: PX1173U-1PRP) but it does not work with the o/s Vista pre-installed on my P100-160. Can someone tell me where to find the Vista drivers for this device?

  It seems that the standard driver is not compatible with Vista and so you will need a new from the Toshiba page.
  You must remove the old driver and then install the new version.

  Good luck

• Problems starting with Satellite P300 - 19K

  I have a portable Satellite P300 - 19K 1 month.

  Several times since I got it when I booted my system and got the password to logon windows my screen became a series of coloured horizontal lines and the Hung system completely. The only solution was to close by holding power button for 5 seconds. Screen start then on reboot that I would get in the trunk, but that did not work. Then, I learned that if I use the F8 key just I hit the power button I can get into a lot of upgraders and I was able to recover using the restore system but every time I lose a few programs that I need to reinstall.

  What has now happened 4 times in a month and becomes boring. I downloaded the latest display driver for the display of my card ATI Mobility Radeon HD 3650, but when I went to install it I learned the version I have on board is the same and everything is beautiful.

  Someone had something similar or have a solution?

  Hello

  If this happens with own pre-installed Vista (factory settings), please contact the nearest service provider and ask for help.
  Please do not test with some additional drivers. It WILL work properly with the factory settings.
  Addresses and phone numbers for ASP you will find under http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

  Good luck!