Satellite P100-219: overheating after memory upgrade

Similar Questions

• Satellite P100-188 starts after the upgrade of the wireless network card

  I recenty installed a new Intel 5100 Series 512AN_MWW Mini PCI NIC in my Satellite P100 - 188 PSPA3E database.
  However, when it is installed, he refused to view and start.

  I'm sure (read the technical info) that these cards use the same interface.
  So why it won't work?
  Is an update of the BIOS to enable a feature. If so, could someone kludge one together please?

  I have the latest version of the BIOS installed 4.70 and am running Windows Vista.
  I am desperate for this that I already have a project N AP 2.0 and want to use it to its full capabilities.

  Cheers, Rob

  Hello

  If I understand your message you have improved the Interior card WLan Intel (Golan) Intel 3945ABG 802. 11a / g to Intel 5100 with project support.

  Boyfriend although it seems that you can't use the WLan draft N card in this laptop model.
  Seems such card is not compatible and cause interference.

  As I know the Draft N need of 3-wire antenna the antenna Satellite P100-188 supports 2 wires only and can be used with the 802.11 A, B or G standard.

• Satellite P100 - 216 (PSPADE) - CPU / RAM upgrade options

  Hello guys,.

  I just got a laptop Satellite P100-216 (PSPADE-01400UEN). (card: T5500 - GeForce Go 7600 512 mb, 200GB)

  It has a Core 2 Duo T5500 inside and I intend to upgrade as well as the RAM to make a good laptop for my wife.

  The question if CPU is supported (assuming that the latest version of the BIOS). I am interested in the series with FSB800 or same T9000 T7000 series (1066fsb) shall if possible because I can get them pretty cheap - I know that the T5500 is just 667fsb by itself, so I wonder if the higher FSB is supported or I stay with 667 Mhz.

  Have searched through the net, but no information so far. Would not buy CPU only for it being not recognized by the laptop.

  Any advice would be much appreciated.

  Kind regards

  It is very nice for laptop and if you want to upgrade the RAM upgrade for your wife. In combination with the operating system pre-installed and optimized its own missus will be like to work on this machine.

  Upgrade of RAM is quite problematic and you can do it alone. what you need to do is get the compatible modules and high quality.
  I think now P100 has 2 GB of RAM, but you can upgrade to 4 GB.

  As compatible modules, you can use
  TOSHIBA
  PA3513U-1M2G (memory 2 GB DDR2-667 Kit) or

  Kingston
  KTT533D2 / 2G 2GB 533 MHz Module
  KTT667D2 / 2G 2GB 667 MHz Module

  On the CPU upgrade, I would just say that we forget. As a first step, it is not necessary to do so and secondaly - http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

  Bye and good luck.

• Satellite P100-238 hangs after a svchost.exe program error message:

  PC: Satellite P100-238 of December 2006.

  about a minute after the start, I get an error message:

  Danish:
  Svchost.exe - programfejl
  Speicherbausteinen ved '0x745f278o' refererede hukommelse ved "0x00000000." Hukommelsen kunne ikke 'read '.
  Klik OK p for afslutte program.
  Klik p Cancel in the fejlfinding udfe I prioriterede.

  English translation:
  Svchost.exe - program error
  Statement on memory refered "0x745f278o" on "0x00000000." Memory could not be "read".
  Click OK to terminate program
  Click Cansel to to search for error in the program.

  After the error message above the PC crashes completely and I can only turn off by the power button.

  What happened with my PC?
  What should I do?
  How can I access my data to make a backup?

  Hello

  I have goggled a bit on the net for more help and I was surprised that many Windows users have had the same problem
  So I thought that there must be something wrong with the windows operating system generally.
  I studied a bit in the MS knowledge base and found this:
  http://support.Microsoft.com/kb/916089/en-us

  According to the news of MS this problem may occur when you have Microsoft Office installed and trying to the Agent Windows Update find updates for Windows Installer.

• Satellite P100-120 overheating running Linux Ubuntu 9.10

  Hello world

  I use Ubuntu 9.10 running on a laptop Toshiba Satellite P100-120; I have a problem of overheating and the fan never put to cool my laptop.
  Looking around, I found that several models of Toshiba Satellite have the same problem and I found that the only solution work seems to update the DSDT file by exploiting this feature on Linux kernels (kernel argument acpi = off is not a solution).

  The problem is that the current Linux kernel of Ubuntu distributions can't take no more (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/395239).
  Given that this problem seems to affect many models of Toshiba/people, I don't know that Toshiba has corrected it to a patch of BIOS; is there a reliable to tell me how I can find this patch?
  I think that we need a BIOS patch because I tried to read the DSDT and indeed it includes bugs (if compile you it with the compiler Intel as described, you can find them).

  Commands to show bugs:
  sudo cat/proc/acpi/dsdt > dsdt.dat
  sudo iasl d dsdt.dat
  sudo iasl tcs - a.dsl

  In the case that Toshiba does not provide a patch, can someone suggest me the reasons (I know that Toshiba is not officially compatible with Linux, but today the Linux community should be accompanied by resellers of computers)?

  Thanks in advance
  Simone Campanoni

  Post edited by: SimoneCampanoni

  > In the case Toshiba does not provide a patch...
  That of the problem. Toshiba doesn't support Linux, especially not for this model of laptop, so you have to search solution elsewhere.
  Support Linux costs money, and why do we have if the books are not delivered with Linux.

  In my opinion the best place to find solution or pickup a few tips useful and info is specialized Linux forums and communities.
  What Toshiba about Linux, you will find under:
  http://Linux.Toshiba-DME.co.jp/Linux/

  Good bye

• Satellite P100-119 - software after the installation of recovery

  I use a Toshiba Satellite P100-119 since 2006. I want to run the original liveries Product Recovery CD after you back up all my data, so that with a vacuum system, the laptop gets even faster.

  But as there were pre-installed software (office, Toshiba programms) when I bought it, I don't know if they went after the recovery. I do not have CD for these programs, they were just pre-installed and what my Windows xp, should recover fully with the cd?

  Hey Buddy,

  After the installation of recovery, you have the same settings that bought the laptop. With other words recovery disk will restore the box settings.

  Firstly the recovery disk will wipe the entire HARD drive and remove all. After this Windows will be installed all the drivers and tools. In addition, will be also installed software preinstalled such as office, etc. and you can use it again. :)

  Backup all important data like the photo, music, etc. but everything will be removed for a clean install of Windows.

• Satellite P100 - no sound after sleep or hibernate on Windows 7 mode

  Hello everyone,

  I'm desperately looking for a solution for my sound problem on my PC after browsing many forums that were talking about the same question, but without effective solutions either.

  I write this message because I have a laptop Toshiba P100-488 running under Windows 7 64-bit (after having upgraded the processor) and that uses a Conexant CX20549 audio chip.

  Everything works correctly, and if the sound is chip with a 64-bit of Windows 7 installed driver but I noticed that after the return of fashion sleep or hibernation, then audio device is still recognized in the Device Manager and shown as active in the control panel and in the taskbar but unfortunately No sound out of speakers.

  I tried several drivers (including those from Dell and HP on some sites) but still the same problem.
  Also, I tried to update the driver from Windows Update that suggested the Conexant SmartAudio HD2 but the same behavior.

  Those of you who would have a solution for me or perhaps a driver concerned that could solve this annoying problem is question here?

  Thanks in advance.

  Best regards

  Fred

  Hello

  A similar problem with Vista OS has been resolved by the MS updates
  Please check this page from MS, perhaps it might help:
  http://support.Microsoft.com/kb/937077/en-us

  Good luck

• Satellite P100 (PSPAOC-O6XO2C) - can I upgrade RAM?

  Is this possible with my model?

  I want to load Dragon Naturally Speaking Preferred 10 and 1 GB of Ram needed. I only have 512.

  Noella salvation,

  Of course you can upgrade the RAM. As far as I know that Satellite P100 can be upgraded up to 4 GB of RAM. For example, you could buy two modules with 1 GB of capacity. Then you have a maximum of 2 GB of RAM.

  You can buy new RAM modules where you want, but I have good experiences with the Kingston modules. I always use them to improve my books because I never had a problem with them.

• Satellite P100 - no sound after installing Vista SP1

  The machine is a Satellite P100 just more than a year, came with Vista installed. No problem until today when Vista SP1 has been automatically downloaded and installed. Now I have no sound from speakers or headphones.

  I've uninstalled and reinstalled the driver Conexant Audio Hi-Def to the latest recommended on the Toshiba site.

  I tried to restore to before the time when SP1 was installed.
  I updated the BIOS to the last on the Toshiba site.

  I pulled my hair.

  Someone at - it any other suggestions?

  It s certainly a useful information. Thanks again!

• I found the solution for the problem of sound-acpi with Satellite P100-219

  Hello

  I found the solution for the problem of sound-acpi with Toshiba P100 (it works with P100-219 at least). I can provide the source modified and compiled table DSDT, but I would like to know if it is possible to get these changes in the next update of the BIOS?

  See you soon,.
  MIK

  Hi Mik

  As you know that it is not possible to find info on the next BIOS, especially if you want to have some information about the Linux operating system. Just wait and see if some forum users pointed out something on the subject.

• Satellite P100 - boot failure after BIOS update

  Hello

  I wanted to update BIOS on my Satellite P100 - (PSPADE) with the latest version, downloaded from the Toshiba site.
  Quit all applications.
  Run the zip file error file not found %path\phlahnt.sys.
  Keyboard not working unable to stop even by using the power button / stop.
  Laptop shutdown unplugged and battery removed.
  More boot Message No, no. Beep, nothing.

  I tried with the CD of restoration with power into the F12 key, but nothing.
  I also tried to power up with and without AC connected and with and without battery, but still nothing.
  Plug, battery, at the time led the power leds and speakers also on
  Any help? Any suggestion, any idea?

  Thank you very much
  Nour

  Hello

  Hmmm what to say. Sounds not good and in my opinion, looks like you have successfully updated the laptop computer with a bad BIOS or something went wrong during the BIOS update process
  Are you sure you used the right BIOS of 110%?

  It seems that you will not be able to fix this problem yourself, without any additional help from the laptop technician.
  In most cases, the BIOS has to be flashed again on the particular way

  For me it s clear, you will need to contact the ASP to get rid of this problem

  Best regards and good luck

• cannot start win8 after memory upgrade

  Hi I have a HP Pavilion P6813w

  It came with win 7 64 bit installed with 6 GB of ram
  I created a duel with victory 8 boot
  It was working fine until I got my 16 GB of ram today
  Well I got the 16 GB in and turn on the computer to get to this
  Recovery
  your pc needs to be repaired
  the application or the operating system could not
  be loaded because a required file is missing or
  contains errors.
  file:\Windows\system32\winload.exe
  error code 0 xC0000001
  but when I'm out of 8 GB it starts and displays the 8 gb of ram.
  I tried to do the repair installation dvd options since the win8 and even tried it recover usb option
  When I use the usb option I get error 22 grub 1.5
  so my question is why win8 will not load with additional memory
  and even win 7 does not load
  It gives me the same error
  my computer shows he takes supporting up to 16 GB
  4 GB ram sticks
  IM experience pc users and cela just stem me
  any idea what could be the problem

  Hi Wallace,

  There is a limit of memory for Windows 8. For version 512 GB for 64 - bit and 32-bit maximum 4 GB is allowed.

  For more information, see the links.

  Limits of memory for Windows versions 

  The memory upgrade (RAM): HP Pavilion p6813w Desktop PC support

  If you have any questions on Windows, feel free to let us know. We are happy to be of assistance.

• Re: Satellite L650/07C-boot-loop after memory upgrade

  I have a Toshiba Satellite L650 / 07C - PSK1JA-07C017.
  To get a little more life out of it, I've updated yesterday with a SSD and 8 GB memory.

  The SSDS works perfectly and I have installed OS and all the drivers and software.
  However, the memory causes a boot loops. I returned to the standard 2 x 2 GB memory at the moment.

  With the new memory installed, the computer startup-loops. When you try to start Windows, the computer will appear at the stage of loading Windows (the boot animation) and then restarts.
  I tried to start with the recovery discs, and it arrives at the stage of loading of Windows Setup, and then restarts.
  She will continue trying to start, then by restarting (then repeat), until I turn it off.

  The memory I installed is Corsair CMSO8GX3M2A1333C9 (2 x 4 GB):
  http://www.Corsair.com/cmso8gx3m2a1333c9.html

  For me, it looks like the same specifications that the modules of memory Kingston 4 GB listed on the Toshiba site as being compatible with my laptop:
  http://www.MyToshiba.com.au/products/Accessories/memory/KTT-S3B/4G/accessories

  I found the specs of memory recommended here:
  http://www.LASystems.be/PDF/Kingston/246787/KTT-S3B4G.PDF

  If I go into the BIOS, I see that the memory is detected as 8192KB. The Toshiba site says that this laptop is expandable to 8 GB.

  Is there something I'm missing?
  Is there another step I need to perform when upgrading their memory?
  I don't know why it won't boot with the new memory modules in that I put.

  Thanks for any help you can offer.

  I assume you have the Australian model is not easy to find info on the hardware upgrade. What I can say is that model European uses DDR3 1066 MHz memory modules and 4 GB of RAM compatible a part PA3677U-1M4G number.

  It must be exact model described by microcens.
  I recommend you use the tested and compatible memory modules.

• Satellite L100-109 starts a new after memory upgrade

  How can I get my Satellite L100-109 to take the 2 GB of memory is it supposed to be able handle.
  It keeps starting over and over again.

  Can you please provide some info on the RAM modules that you use?
  Usually if you use high quality compatible products, you will not have these problems.

• Satellite M45-S169 - overheating and the upgrade card RAM/graphics

  Hello

  I have need some answers and solace to the questions I have on my laptop. Here are the following questions:

  Laptop overheating fast enough, hereby, I mean in about 10 minutes, the laptop Burns upward. It is the model or is there something wrong with it? I can't keep the laptop without maintaining that it plugged into the wall at all times. That this has something to do with my battery like that I need a new?

  I am able to install the new RAM * (2 GB Max) and if yes, someone knows how it slots are for this model? (Not really opened to check because I'm bad to put things together after taking them apart)

  I am able to install a new graphics card for the laptop or I'm stuck with ATI RADEON XPRESS 200 M Series? (and if it is not too much to ask, is the graphics card, I have good, bad, or so - so)

  Sorry if there are too many questions, but it would be really nice if I get the answers to all these.

  Hi Honu_2,

  (1.) you should clean your laptop using a jet of compressed air. This could blow out the dust from the cooling fans and read this article please:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=40

  2.) Yes, it seems that you need a new battery if your laptop only works with AC/DC adapter connected.

  3.), you should check your owner's manual. As far as I know this model supports up to 2 GB of RAM. This means that you can install 1 GB into the two slots.

  (4.) the graphics card upgrade is not possible because it s/set soldered on the motherboard and your laptop is designed only for the preinstalled graphics card.

  By the way: these questions are already answered here. Check out the forum for similar topics, you will find many interesting things! ;)