Problem using CmdLnLauncher.bat for BRs

Similar Questions

• Problems using Messages app for you sign in to messenger FB

  Hi all!

  I used to use the messages app on my mac to chat on messenger FB. As you may know, we can do this by creating a jabber account in the messages application. However, for these past months, it has just stopped working and I'm basically impossible to connect to my jabber account (e-mail FB). Whenever I try to connect, he asks me to enter my password then it says that my username/password is incorrect.

  Well, they are not bad I can use the same passage to connect to my FB and I checked my username on FB just to be safe.

  I did everything possible to try to resolve this problem. Called apple care, went to the genius bar etc... None of them know what to do. 90% of them did not even know he xas actually gets set up an account jabber and cat by FB messaging directly from the messages app.

  In any case, I hope that someone who is a greater genius than the geniuses at the apple store can help me to sort.

  I have:

  MacBook Air 11 '' - end of 2014

  OS X El Capitan

  Any help to make it work will be greatly appreciated!

  Thank you

  Hello

  https://developers.Facebook.com/docs/chat

  While this Doc says April it was July before most people noticed and it seems that some are stayed connected or were able to reconnect since then as well.

  Basically, Facebook has closed their Jabber server (those with @facebook.chat.com IDs)

  They were launched from a separate application for Macs and have a different game in place in login pages in a browser for the cat.

  

  20:33 on Tuesday. March 1, 2016

   iMac 2.5 Ghz i5 2011 (Mavericks) 10.9
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   a few iPhones and an iPad

• Problems using dbms_transfer_file - Solaris for Linux

  We are moving several TB of Solaris to Linux.

  Downtime should be minimal - so we explored Doc-ID 1389592.1 .  It seemed to be just to the top of our road.  Copy of ASM ASM auto-convertis Endian... solves a lot of problems.

  We are able to transfer files at least 4096 MB (4 GB to be exact) with no problems.  4097 MB the work is suspended or said a file already exists (and the file does not exist in the destination - we confirmed that in the ASM destination).

  So we tested will Solaris Solaris and things work fine, but if it's an option we would use Data Guard.  So it was just a confirmation that 8GB is OK.

  We have opened a file, but I was wondering if someone sees this problem as well.  If so, what has been a solution.

  user12020481, according to the following remark dbms_file_transfer corrupts the data when they are used for transport through the endian settings.  You can check with the support

  - -

  Dbms_file_transfer corrupt Dbf when copying files between endians (Doc ID 1262965.1)

  - -

  HTH - Mark D Powell.

• Is there a problem using Flash Player for Mac?

  I have been a user of Flashplayer for some time using an iMac (using 10.7.5 Osx version) and have experienced many problems recently when you try to visit different sites for example, BBC News, Tom Tom for upgrades. Web site status, I need to download the latest version of Flash Player, what I can do once I downloaded the latest version and click on the prompt to revist the site I've been on one) it only takes back me and b) when I return to the same place it always say I need to get the latest version of Flash Player! Boring or what!

  Solved!

  I download the Setup offline to another post from here!

  Thank you!!!

• Microsoft uses independent companies for phone users to tell them that they have problems with their MS mild wear and offer to sort by phone?

  Microsoft uses independent companies for phone users to offer sort the problems that we are not informed by phone, or is - this another scam?

  Scam.

  See here: -.

  http://www.ComputerActive.co.UK/CA/PC-help/2134917/genuine-Microsoft

• My problem is that when I try to save an image from Adobe Photoshop by using the 'save for Web' half of the dialog box does not appear.

  I use a Vista Home Premiuim Windows in an Acer Aspire One 10.1 "." My problem is that when I try to save an image from Adobe Photoshop by using the 'save for Web' half of the dialog box does not appear. Can someone help me please?

  Here is a screenshot of my problem...
  [IMG] http://i55.tinypic.com/of5w01.png [line]
  Help me please.

  Hello

  1. were you able to see the front dialog box?

  2. did you of recent changes to the computer?

  This happens because your screen resolution is less than the required minimum of 1024 x 768.

  You can try to change the resolution of the monitor and check.

  For more information, see the link:

  Change settings display on multiple monitors

  Change the screen resolution

  You can also refer to Adobe support links and also post your request in the Forum from Adobe for assistance:

  http://forums.Adobe.com/thread/433020?TSTART=0

  http://kb2.Adobe.com/CPS/403/kb403268.html

  http://forums.Adobe.com/community/Photoshop/photoshop_windows

  Hope this information is useful.

• Critical failure DirectX - DXDiag shows no problem, used for end-user TIME, nothing works.

  Without apparent reason, Direct X has suddenly stopped working. I can't play Solitaire or the Sims 2. I followed the previous advice on this issue, and with the help of dxdiag shows no problem, reinstall he didn't help not, using the runtime for the end-user to install thing older DX 9 stuff told me that everything is up to date, I am at a total loss.

  I am running Win 7 Home Premium and everything I have running is Firefox, GIMP, and Skype. I searched for nothing 'media center' as I've heard it's a question and nothing like running. I don't know what to do.

  There are two DirectX install 'things'.

  It looks like you were using the Installer Web of DirectX, which is an update of DirectX.

  The update only installs the DirectX 'missing' files and does not overwrite the existing DirectX files.

  which is what is needed if a DirectX file or files is damaged.

  -It may be that your error is the result of corrupted files. It happens from time to time. Sometimes because

  a game or other software borks DX format when it insists on the installation of DX again for you.

  The DirectX Redist (June 2010) below to replace all DirectX files.

  When you run the installer it will ask you where you want to save the downloaded installation program then

  "unpacks" the installation of DirectX in the selected folder.

  After unpacking, open that folder and locate the DXSETUP.exe. This will reinstall DirectX, and

  should at least eliminate corrupt files DX as the source of the error.

  (You can delete the installation folder after installation).

  Download details - Microsoft Download Center - DirectX Redist (June 2010)

  -Have you installed anything new? Updated graphics drivers, game, Skype, Firefox Add - o

• performance problem, when I use the lappy for long periods... he get odious

  I installed windows 7 in my lappy... When I use the lappy for long... he get odious... I'm irritating with that... and when I restart it started working as usual.please help me form this problem

  Hello

  1. have there been recent changes to the computer before the show?

  2. this happens to you when you work on any specific application?

  I suggest you follow the given steps and later a update on the State of the question.

  Method 1: Try to run the troubleshooter of Performance:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Method 2: Optimize Windows 7 for better performance:

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Ways to improve your computer's performance:

  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• I used Paperport 9SE for several years without any problems with XP. Now, because of a forced computer upgrade, I have Windows & OS. Now I find that I can't "save under" or "send to" Word.

  I used Paperport 9SE for several years without any problems with XP.  Now, because of a forced computer upgrade, I have Windows & OS.  Now I find that I can't "save under" or "Send scanned documents to ' MSWord' as suggestions?

  Hello

  Is Microsoft Office (Word) installed on the new Windows 7 operating system?

  If this isn't the case, install Microsoft Office must fix.

  If Microsoft Office is installed, try Microsoft Office. Follow these steps.

  a. click Start.

  b. click on Control Panel, programs and features.

  c. find Microsoft Office.

  d. right-click on Microsoft Office and select Repair.

  Now, check the question.

• There seems to be a problem with the soft ware.  We use the CS6 for Records services and when we try to save the record, part of the record is stored. The record to be saved as an mp3 file is 70 to 100 KB but recently only 3 KB are generally

  There seems to be a problem with the software.  We use the CS6 for Records services and when we try to save the record, part of the record is stored.  Usually the recording to be saved as an mp3 file is 70 to 100 KB but recently only 3 KB are recorded.  What should I do to fix this?

  You may need to reset your preferences of hearing files stored in C:\Users\"username"\AppData\Roaming\Adobe\Audition\5.0. If you rename this folder in 5.0.bak that hearing won't find it when you open the next time if it will recreate a new settings with the default settings folder. See if hearing then works as expected.

• Hello!, my name is jan and I use lightroom 2 for many years. I have an original installation disk with a 24-digit serial number. I have never installed lightroom problems wih. suddenly lightroom won't start when I try an image I tak

  Hello!, my name is jan and I use lightroom 2 for many years. I have an original installation disk with a 24-digit serial number. I have never installed lightroom problems wih. Suddenly, lightroom will not start when I try an image that I have taken with my nikon D500 and transferred to WINDOWS 8.1.  I tried to re - install lightroom: the application procedure serieal number, but refused to accept the number that has always worked. Help, please!  Jan

  If you are certain that you have the correct number of series, there are really not much that we can help you here. You can try to download and install the latest version of Lightroom 2. This will be the trial version, but when the trial screen there is an option to indicate that you have a serial number. Either way, Lightroom serial numbers start with the four first digits being 1160.

  Adobe - Lightroom: for Windows: Adobe Photoshop Lightroom 2.7 - English, French, German

• OutOfMemoryError: Limit superior GC exceeded when loading directly the source using IKM sql for sql. Growing ODI_MAX_HEAP do not solve the problem.

  OutOfMemoryError: GC overhead limit at execution a loading interface directly sql for sql with no work table.

  I get the error message: error: exception OutOfMemoryError: higher GC limit exceeded when executing an interface making a direct using IKM SQL for SQL command load Append, source a 150millions lines table.

  I have increased the ODI_MAX_HEAP and the interface run longer and failed. I'm already at: ODI_MAX_HEAP = 12560 m I tested with ODI_MAX_HEAP = 52560 m and still error.

  I am following up to the memory of the server and I still have available memory...

  Apart from the problem of memory I know that this type of load should be possible because the step of data load on LKM SQL to Oracle is able to load the work table $ CAN. Ideally, I want to emulate this behavior by using SQL for SQL IKM.

  1 - What is the right path to follow here? (change the parameters of memory or modify the IKM?)

  
  

  2 - ideas on how to solve the OutOfMemoryError: GC overhead limit exceeded error? (GC means Garbage Collector)

  Execution of the IKM interface in the Simulator generates this code:

  Load (Source) command:

  Select

  source - tbl.col1 COL1,

  source - tbl.col2 COL2,

  source-tbl. "' COL3 ' COL3

  of public.source - tbl AS source-tbl

  where

  (1 = 1)

  Default command (Destination):

  insert into the source-tbl

  (

  col1,

  col2,

  COL3

  )

  values

  (

  : COL1,.

  : COL2.

  : COL3

  )

  My experience is very limited with ODI so I don't know about changing the code to the KMs

  Thanks in advance.

  Find a work around the error of generals limit exceeded GC:

  -in my case I was running without the IDE so that changes made to the odiparams.sh were not useful.

  -This means that I need to change the JVM settings to:

  $ODI_HOME/oracledi/client/odi/bin/odi.conf

  AddVMOption - XX: MaxPermSize = NNNNM

  $$ODI_HOME/oracledi/client/ide/bin/ide.conf

  AddVMOption - XmxNNNNM

  AddVMOption - XmsNNNNM

  Where NNNN is a higher value.

• I'm trying to upload my site using ftp, but for some strange reason, the ftp server box becomes red, even if the name is correct. everyone knows about this problem?

  I'm trying to upload my site using ftp, but for some strange reason, the ftp server box becomes red, even if the name is correct. everyone knows about this problem?

  Hello

  I would ask to share with you the screenshot of the box which becomes red.

  Concerning

  Vivek

• I installed Adobe elements 12 update to 6 items.  I need to use the save for Web function, but it is grayed.  I tried re-installing 12 items three times in case there was something missing, but this has not solved the problem and save the enemy

  I installed Adobe elements 12 update to 6 items.  I need to use the save for Web function, but it is grayed.  I tried to reinstall 12 items three times where it was missing something, but this has not solved the problem and enemy Save Web feature is always gray on. How can I get this feature too much work. I contacted the home and they have happened to you. I have 20 minutes to make a customers web work and if I don't work (about £500). Please advise/help.

  You are on the Expert tab in the editor?

• Problem using the View object for validation

  Hello
  I defined a form of simple to practice swing. It has an entity object and two objects in view. One of these objects in view is an editable VO based on area of occurrence, and the other has a simple 'select count (*)' table. I defined a validation of the method on one of the EO attributes to see how to use the VO for validation. However, I set the Module of the Application to use both from my point of view. As much as I undrestood, when I define a VO for AM, AM will instantiate it the first time it starts to run. Here is the code inside the method for the FirstName attribute validation:
  
  / * Validation for first name method
  */
  public boolean validateFirstName (String data) {}
  ViewObject vo is getDBTransaction () .getRootApplicationModule () .findViewObject ("CountEmployeeInstance");.
  If (vo == null) {}
  System.out.println ("vo is null");
  }
  else {}
  vo.executeQuery ();
  If (vo.hasNext ()) {}
  System.out.println ("count =" + ((CountEmployeeRowImpl) vo.next ()) .getCount ());
  }
  else {}
  System.out.println ("vo has no other");
  }
  }
  Returns true;
  }
  
  The problem is that vo.executeQuery () does not return a any folder. In fact the vo.hasNext () returns false and I get the message "vo has had no news" on the console. Please be careful that the sql statement in the VO is always SELECT COUNT (*) and it returns a record. I found that if I use vo.closeRowSet () vo.executeQuery () before everything is working properly.
  Please tell me what is my problem and why it works that way?
  Best regards
  Alireza Vali

  Sorry Alizera, on transit to the officer of the WATCH.

  This can be the 'compulsory' classic of the substitution of issue position iterator. Take a look at the post following Sascha Herrman who addresses the issue and as solution suggests the creation of a new RowSetIterator to avoid the problem:
  Re: viewObject.executeQuery does not work the second time

  There are a number of positions where Sascha has solved this problem so a search can be useful to the effort on your part.

  Next post gives an interpretation of long-term by myself if accidentally you use getRowSetIterator that you might find useful, but essentially Sascha answer is correct, "to create a new RSI", I was talking a slightly different point:
  Re: [SOLVED] Re: how to browse all lines

  Let us know how you go.

  See you soon,.

  CM.