Problem when start WLS_REPORTS

Similar Questions

• help with tabs, I've reset but does not solve problem when started

  When started the new tab is blank and does not show the previous 9 pages as before. I went to help troubleshooting and then reset Firefox. It works until I closed Firefox well when I start a new session new tabs are white again.
  Help, please.

  The icon of the grid 3 x 3 is on the page of the tab itself (screen attached). Simply, that shows and hides the thumbnails. In fact, I now empty placeholders. It erases the images?

  Anyway, if you have the about: newtab about: config, but you do not have the subject: newtab page when you press Ctrl + t, the problem is usually an extension. You can review what you have and configure or disable here:

  Firefox orange (or the Tools menu) button > addons > Extensions category

• HP G72: Hp G72 screen problem when starting computer

  Then when I booted my computer one day the screen was red everywhere where black pixels were supposed to be so I opened the laptop, because I thought it was a connection to the problem of the motherboard, so I disconnected all the wires and the flat wire on the motherboard and pluged all back in their original locations, then when I started the computer it lights , but there weren't any windows starting thing was only in black. I think it's maybe because when I pluged to hide in one of them couldn't have properly.

  If someone could tell me what is wrong with the computer?

  Hi @1megahaloman

  Welcome to the HP Forums!

  This is a fantastic place to find answers and information!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  How can I find my model number or product number?

  I understand that your screen is red everywhere where black pixels should be. You have opened the laptop to check the connections. You unplugged and replugged everything on the motherboard and reassembled.  Now, when you try to start Notepad, you see the computer turn on but the screen remains black or white.

  Here is a link to the HP - black screen troubleshooting laptops with no. Error Messages at startup or boot which should help to determine the cause.

  Here is a link to HP G72 Notebook PC Maintenance and Service of Guide. Please note Chapter 4 for removal and replacement procedures. This can help you determine if you have replaced all connections correctly.

  Good luck!

• msvcr100.dll problem when starting Photoshop CS6

  Windows 7 64 bit - Creative Cloud License-

  Hello

  I have the following problem:

  When I started (click on icon) my photoshop icon highlights a moment and then he disappeared.

  When I check my logs, it gives me the following message is displayed:

  Dutch translation

  Foutbucket 86825153, type 4

  Event name: APPCRASH

  Answer: No available

  ID of the CAB file: 0

  Signature of the problem:

  P1: Photoshop.exe

  P2: 13.1.0.0

  P3: 50b4058d

  P4: MSVCR100.dll

  P5: 10.0.40219.1

  P6: 4d5f034a

  P7: 40000015

  P8: 00000000000761c 9

  P9:

  P10:

  Attached files:

  C:\Users\Joogle\AppData\Local\Temp\WERFF19.tmp.WERInternalMetadata.XML

  These files are probably no longer available:

  C:\Users\Joogle\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Photoshop.exe_a e46505f703c2a262d971eb2a381f58683537d10_11633620

  Analysesymbol:

  Looking again fix: 0nRapport id: c89243bf-6332-11e2-ac22-ed6ea1309e4a

  ReportStatus: 0

  I have already installed Photoshop from the cloud (creative), also of another language (such as English American or just Dutch, English int.), but still the same.

  Maybe one of you knows how to solve? Or had the same problem?

  Greetings Marvin

  Thanks for your help. I uninstalled the last MSVC2010 as u said. x 86 and x 64, restarted the computer and install them again. But I still have the same question.

  So in fact the hardest part of it and my last option. Uninstall photoshop!

  When uninstalling, I discovered that you can leave the preferences. This is the hardest part, I was actually afraid of.

  When I reinstall my Photoshop, everything returns the same, inclusive preferences.

  Maybe it was the only way to fix it.

• problem when starting the built-in Server applicatino

  I am newbie using jdeveloper 11.1.1.5 and ADF so I start the web application of fusion that exist in jdeveloper help, but when I received the stage run the app and when I tried to run start the integrated application server that he has failed with the following error:
  
  [Waiting for the field to complete the construction...]
  [11: 43:51] Creation of integrated Weblogic domain...
  [11: 44:39] integrated Weblogic domain Extension...
  [11:45:18] integrated Weblogic domain completed successfully.
  Using the 7101 port *.
  "C:\Documents and Settings\b.othman\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\bin\startWebLogic.cmd"
  [waiting for the server to complete its initialization...]
  The system does not have the specified path.
  .
  .
  Arguments of memory in JAVA:
  .
  Start mode of WLS = development
  .
  CLASSPATH =
  .
  PATH=C:\app\hiba\product\11.1.0\db_1\bin; C:\Windows\System32; C:\WINDOWS; C:\WINDOWS\System32\Wbem
  .
  ***************************************************
  * To start WebLogic Server, use a username and *.
  * password assigned to an administrator-level user. For *.
  * server administration, using the WebLogic Server *.
  * the http://hostname:port\console console *.
  ***************************************************
  from weblogic with the Java version:
  Java version "1.6.0_24".
  Java (TM) SE Runtime Environment (build 1.6.0_24 - b50)
  Java Client VM (build 19.1 - b02, mixed mode)
  WLS starting with line:
  C:\Oracle\Middleware\jdk160_24\bin\java-Dweblogic.Name=-Djava.security.policy=\server\lib\weblogic.policy-Djavax.net.ssl.trustStore=D:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks-Dweblogic.nodemanager.ServiceEnabled=true
  Use: java [-options] class [args...]
  (to execute a class)
  or java [-options]-jar c [args...]
  (to execute a jar file)
  
  where options include:
  -customer to select the 'client' VM
  -Server to select the 'server' VM
  -hotspot is a synonym for the 'customer' VM [obsolete]
  The default VM is a customer.
  
  -cp < search path for class directories and zip/jar files >
  -classpath < search path for class directories and zip/jar files >
  C are separate directories, JAR archives list.
  and ZIP archives to search for class files.
  D < name > = < value >
  set a system property
  -verbose [: class: gc: jni]
  turn on verbose mode
  -a print product and output
  -version: < value >
  requires the version specified to run
  showversion - product print version and continue
  JRE - restrict search | JRE - No.-restrict-search
  include/exclude user private JRES in the version search
  -? -allow to print this help message
  X - print help with non-standard options
  -ea [: < packagename >... |: < classname >]
  -enableassertions [: < packagename >... |: < classname >]
  enable assertions
  -da [: < packagename >... |: < classname >]
  -disableassertions [: < packagename >... |: < classname >]
  disable assertions
  ESA | -enablesystemassertions
  activate the system asserts
  DSA | -disablesystemassertions
  disable assertions of system
  -agentlib: < libname > [< options > =]
  load the library native agent < libname > example - agentlib: hprof
  See also, agentlib -: jdwp = help and agentlib -: hprof = help
  -agentpath: < path > [< options > =]
  load the library native officer of full path
  -javaagent: jarpath > [< options > =]
  agent of loading Java programming language, see java.lang.instrument
  -startup: < imagepath >
  display the home screen with the specified image
  Process is complete.
  
  I think that the problem in calling java cause there is no class name or jar to call
  
  I need some help with that
  
  Thank you

  Try to set the JDEV_USER_DIR environment variable to point to a directory of user JDeveloper without spaces inside. Make sure that you restart JDeveloper after him.

• display problem when start my Mac with Sierra

  When my MacBook Pro 13 with the retina display changes to another other than 1280 x 720 resolution, when I boot my Mac, there will be a white strip above the logo apple with flash on the screen... Is there a solution?

  Hello fish6,

  After reviewing your post, it sounds like you have problems with the resolution of the screen changes and the screen flashes.
  I would recommend you read this article, reset the NVRAM can help with the screen problems you encounter.
  

  How to reset the NVRAM on your Mac - Apple Support

  Thank you for using communities of Apple Support. Good day.

• Receive error message "is not a boot disk" problem when starting Vista

  I need help!  I used Ubuntu for a class exercise.  When I have finished using the bootable cd and tried to go back to Vista I get the error message "is not a bootable floppy.  Please insert a bootable floppy disk and press a key to try again...? »

  starting the PC and if you see the splash screen, immediately press "esc". You should have an option to select your hard drive. Use the arrow keys to select and press ENTER to start Windows Vista.

• Simulator has problems when starting

  Hello

  I develop for BlackBerry already for some time, but last month I had to reinstall everything on the new laptop. Then I was busy with something else and now I have to restart with the development of BlackBerry. I installed the 5.0 Simulator and saw a problem. The Simulator starts completely, but the image of the window always remains the same. So I can see the original image of the Simulator and on the side of the screen of opinion about mouse cursor (if I'm above the menu button, I can see it, if I'm above the LCD screen I can see the details, but as the picture, I see only the first splash screen).

  The PC configuration is:

  Win Vista

  Eclipse 3.5.2

  BlackBerry 1.1.2.201004161203 - 16 plug-ins

  BlackBerry SDK 5.0.0.25, 4.6.0.23, 4.7.0.57

  Java JRE 6, jdk1.6.0_21

  I tried all the integrated simulators 5.0 and then some was isolated but I couldn't find a job.

  Thank you very much

  Eva Rezkova

  Problem solved.

  If I put off the graphics acceleration, everything works fine. Don't know why, but works.

• get the problem when starting native/cascades beta sdk - "QML preview is not available.

  Hello friends,

  When I start native/cascades sdk beta (latest version). It shows an error message "QML previw is not available. I am also attaching the screenshot of it. And my PC has no external graphics card.

  Please tell me why I get this message?

  Thank you best regards &,.

  Dinesh

  Hello dinesh,

  Looks like you don't have a graphics device that supports the preview mode. You must have a fairly modern graphics chipset with sufficient support to use the live preview Momentics openGL. Details are provided in the section 'Manufacturer of Cascades' to https://developer.blackberry.com/cascades/download/releasenotes/. Unfortunately, unless you upgrade your graphics card, you should probably use the Simulator or device to display your user interface.

  Tim

• BEX - problem when starting a software event

  I / m you try to run software that is for educational purposes, but after installation, then the software starts, a pop-up window appears saying "Learnnext has stopped working".

  In the details of the problem, it was written:
  Signature of the problem:

  Problem event name: BEX

  Name of the application: LearnNext - Airtel.exe

  Application version: 1.0.0.11

  Application timestamp: 4eca090c

  Fault Module name: MSVCR80.dll

  Fault Module Version: 8.0.50727.4927

  Timestamp of Module error: 4a2752ff

  Exception offset: 000489bc

  Exception code: c000000d

  Exception data: 00000000

  The system version: 6.1.7600.2.0.0.256.1

  Locale ID: 1033

  Additional information 1: e926

  More information 2: e9263950142051511ceadcb55c0aa80c

  Information additional 3:2057

  Additional information 4: 2057efc93869bca82b526c3a4de9bede

  Read our privacy statement online:

  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt
  ---------------------------------------------------------------------
  I am running windows 7 x 64 bit
  1 GB of RAM
  Intel processor Dual Core @ 1.60 Ghz
  GPU: Intel 82852/82855 GM/GME revision 2
  HARD DRIVE: 660 GB
  Please find a perfect solution to my problem... and as soon as possible. !!
  Thanks in advance!

  Thank you stephanie Podder,.

  LernNext people have provided a new version of the Application (EXE file)
  now the problem is solved.
  can be application has had a few errors in it.

  Thanks again

  concerning

• Problem when starting

  While my system is starting, on the start screen it does not display the tiles? and what is to be pinned to the taskbar also disappeared. Now I start my system through assistance in the start menu.

  Hello

  We would like to know the following details from you to help you to come.

  (1) you have an another user account to which you signed?

  (2) did you uninstall all apps?

  I suggest you to check the problem under another user account if you have or you can create a different user account and check it out. Follow the steps below to create a user account.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-8

  Write us with the asked details and the status of the issue. We will help you to come.

• Problem when running server SOA

  Hi, I'm looking for from the SOA server. I started successfully to Server Admin, but I'm having problems when starting Server SOA. When I'm doing that I get many errors, follow three last lines in the console:
  
  12 characters do not match "Expressions of folklore <>" expected "" "
  TForm is running and is accepting applications
  12 characters do not match "Expressions of folklore <>" expected "" "
  
  When I am trying to start SOA server administration console (settings soa_server1-> control-> check soa_server1-> Start/Stop, then click Start) I get: string received certificate of localhost127.0.0.1 - has no control of verification of hostname. Pawe certificate?-Komputer but check should localhost
  
  Could you help me? If I'm going to write more information.
  
  Thanks in advance
  
  Edited by: 948093 2012-07-23 06:07

  Hello

  It seems that when you call after a command.

  startManagedWebLogic soa_server1 'http://127.0.0.1:7001 '.

  try this way.

  soa_server1 startManagedWebLogic.sh T3: / / :

  Make sure you gave Admin Server port or not.

  Check your config file to check the port and IP address or correct.

  Kind regards
  Kal

• My USB to ethernet adapter works only if plugged into my MacBook Pro. I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports! Any suggestions?

  My USB to ethernet adapter works only if plugged into my MacBook Pro.

  I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports!

  Any suggestions?

  Juice what 'expander' did you use?

  What model of MacBook Pro?

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• I have install fallout 3 and the last update (1.7), but when starting a new game, he tell me that windows is having a problem reading it & then it locksup.

  original title: game Fallout 3 on Windows 7 problem

  I have install fallout 3 and the last update (1.7), but when starting a new game, he tell me that windows is having a problem reading it & then it locksup, I have a Toshiba Satellite, Fallout New Vegas works perfectly on my laptop, how can I play Fallout 3, is here to play Fallout 3 on windows 7.

  Hello

  You can see the link provided. It gives information that Fallout 3 is not compatible with Windows 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=fallout%203%20

  Windows 7 Compatibility Center: Fallout 3 http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=%20Fallout%203&OS=32-bit

  You may need to contact the manufacturer of game for support

• When starting my laptop, a warning poster says c:\program can affect the function of other applications, appointing him to c:\prgram1 will solve the problem

  Hello

  When starting my laptop (Windows vista), pop - up warning message indicating c:\program can affect the function of other applications, by naming to c:\prgram1 will solve the problem options: would you like it to remane, or ignore it.

  Can you help me

  Thank you

  Original title: Cprogram

  Hello

  Method 1:

   I recommend you put the computer to boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  You can also scan your computer the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  Hope this information is useful.