display problem when start my Mac with Sierra

Similar Questions

• I get a message from DLL run when starting my laptop with Windows 7

  I get a message from DLL run when starting my laptop with Windows 7.  One of the messages is: c:\users\xxx\AppData\Local\fgpise.dll. How can I get rid of these messages? McAfee has detected two Trojan horses and withdrawn earlier today. He says that my system is clean now. Did that cause this problem?

  Hello

  Do not assume that any malware has been removed.

  This is probably the result of malware then do a very thorough check and when the system
  is clean see the following message to remove this error.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER THAT you are sure that the machine is clean of any malware.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Photoshop CS6 crashes when starting my Mac. Reset preferences does not help. Download CS6 again if I have my serial number? And what do I need to uninstall the version crashed everything first?

  Photoshop CS6 crashes when starting my Mac. Reset preferences does not help. Download CS6 again if I have my serial number? And what do I need to uninstall the version crashed everything first?

  Hi christophp,

  Yes, you can do this, please follow the steps.

  Uninstall the existing version for Photoshop

  Then use the Adobe CC cleaning tool to remove files left link: http://download.macromedia.com/SupportTools/Cleaner/mac/AdobeCreativeCloudCleanerTool.dmg

  Restart the system

  Follow the link and download Photoshop CS6: applications download Creative Suite 6

  Enter the serial number to activate it.

  Let us know if that helps.

  Kind regards

  ~ Mohit

• help with tabs, I've reset but does not solve problem when started

  When started the new tab is blank and does not show the previous 9 pages as before. I went to help troubleshooting and then reset Firefox. It works until I closed Firefox well when I start a new session new tabs are white again.
  Help, please.

  The icon of the grid 3 x 3 is on the page of the tab itself (screen attached). Simply, that shows and hides the thumbnails. In fact, I now empty placeholders. It erases the images?

  Anyway, if you have the about: newtab about: config, but you do not have the subject: newtab page when you press Ctrl + t, the problem is usually an extension. You can review what you have and configure or disable here:

  Firefox orange (or the Tools menu) button > addons > Extensions category

• Motion 5 crashing when adding text - Mac OS Sierra

  I just upgraded to Mac OS Sierra and started a new project to Motion 5.  Everything seems to work fine except when I try and add text.  I start typing Motion 5 breaks down.

  There an idea on how to solve this problem, assuming that I won't go back to El Capitan?

  Thank you.

  NEVER update apps video pro or OS X versions in the middle of a project.

  NEVER update the versions of OS X until all your vital applications and plugins have been updated to be compatible.

  FCPX, Motion, Compressor all have minor with Sierra problems until their Sierra updates are released.  Many third-party plugins is not yet compatible Sierra.

  Difficulty?  Yes, wait for the update of Sierra for applications video pro.  That's all you can do.  Or roll back to El Capitan.

• Display problems when Satellite A205-S4797 is connected to the AC adapter / CC

  Hey friends

  I have PC Toshiba laptop A205-S4797, win vista on it

  Here's the problem... (Question to display only when the AC adapter connected)

  When I connect power adapter the screen shows lines of different colors or turns black with a small box in the meantime or anywhere on the screen with colors in it and the system crashes, I have to stop using the power button and turn on again. It works fine without power adapter.

  you guys you will suggest the solution for this?

  Just a question:

  This happens when your laptop is running and you connect adapter more or when you start a laptop every tie with power running?

• A problem when using Flash files with a browser

  Hello

  I have this weird problem when it comes to the use of flash in dreamweaver, whenever I use a flash file & after I test it on Both Firefox & IE browser), I get this weird border whenever I click on it, and here's a photo shows u what I mean...

  If all goes well. I'll take a few answers:

  Thanks in advance.

  Try adding the following (in red) to the style of the web page and see if it helps...

• Display problems when you run applications JavaFX 2.0 with multiple monitors

  I noticed a number of issues when running JavaFX 2.X applications on a system with multiple monitors. My setup consists of 2 monitors (primary and secondary on a dual graphics card) and my third on a separate graphics card.
  
  The questions I have observed are,
  
  (1) the application is not too sensitive when running on the second or third monitor.
  
  (2) when the application runs on 2 monitors and re-tire it will only redraw correctly on one of the monitors. The application will be displayed as a black box on the another moniter
  
  (3) where the application does not run on the primary monitor and a ChoiceBox is selected choice appears as expected but it blackens the application in the background.
  
  Someone else encountered similar problems? I'm going to raise a JIRA with screenshots and details of my system if other people are able to confirm that they are also suffering from similar problems.

  Hi, I had similar problems. My application uses 2 monitors and now everything works just perfect. It turned out that the interface is causing these disorders. I changed mine, then he worked (actually more the new installed I also had to update the driver for the new interface)

• Rendering problem when setting ChoiceBox elements with a service

  I am preparing some examples to show the various features of FX when I came across this strange issue. I use a javafx.concurrent.Service to populate the items of a ChoiceBox. When I click the ChoiceBox to display a list of choices, I get only a blank rectangle with a triangle drawn on top. It's only when I click on the triangle the ChoiceBox gets correctly redrawn. From what I could see in the debugger is that the elements are there at the time when I click on the ChoiceBox.
  

  final ChoiceBox<String> choiceBox = new ChoiceBox<>();
  ExampleService service = new ExampleService();
  service.setOnSucceeded(new EventHandler<WorkerStateEvent>() {
       @Override
       public void handle(WorkerStateEvent aEvent) {
            ObservableList<String> tempValue = (ObservableList<String>) aEvent.getSource().getValue();
            choiceBox.setItems(tempValue);
       }
  });
  service.start();

  Screenshot: [url https://dl.dropbox.com/u/8978331/ChoiceBoxRenderingProblem.png] https://dl.dropbox.com/u/8978331/ChoiceBoxRenderingProblem.png
  Code example: [url https://dl.dropbox.com/u/8978331/Example2App.java] https://dl.dropbox.com/u/8978331/Example2App.java
  
  I'll write a Jira issue for this one, or is it my fault?
  
  I use 1.7.0_10 - ea - b13 on Windows 7 64 bit, but same problem occurs on Mac OS X.
  
  (PS: I could also use binding to accomplish this task, but unfortunately the RT-22449 prevents me to do).
  
  Published by: Thilo 13 November 2012 10:57 to repair broken links

  Looks like a bug to me. It is not related to the use of a service (or multithreading): the code below suffers from the same issue.

  import javafx.application.Application;
  import javafx.collections.FXCollections;
  import javafx.collections.ObservableList;
  import javafx.event.ActionEvent;
  import javafx.event.EventHandler;
  import javafx.scene.Scene;
  import javafx.scene.control.Button;
  import javafx.scene.control.ChoiceBox;
  import javafx.scene.layout.VBox;
  import javafx.stage.Stage;
  
  public class ChoiceBoxTest extends Application {
  
    @Override
    public void start(Stage primaryStage) throws Exception {
      primaryStage.setTitle("Example 3");
  
      final ChoiceBox choiceBox = new ChoiceBox<>();
      final Button populateButton = new Button("Populate");
      populateButton.setOnAction(new EventHandler() {
  
        @Override
        public void handle(ActionEvent event) {
          ObservableList tempValue = FXCollections.observableArrayList();
          for (int i = 0; i < 10; i++) {
            tempValue.add("Item " + i);
          }
          choiceBox.setItems(tempValue);
          // This will work:
          // choiceBox.getItems().setAll(tempValue);
        }
  
      });
  
      VBox root = new VBox();
      root.getChildren().addAll(populateButton, choiceBox);
      primaryStage.setScene(new Scene(root, 300, 250));
      primaryStage.show();
    }
  
    public static void main(String[] args) {
      launch(args);
    }
  
  }
  

  To work around this problem, replace

  choiceBox.setItems(tempValue);
  

  with

  choiceBox.getItems().setAll(tempValue);
  

• problem when starting the built-in Server applicatino

  I am newbie using jdeveloper 11.1.1.5 and ADF so I start the web application of fusion that exist in jdeveloper help, but when I received the stage run the app and when I tried to run start the integrated application server that he has failed with the following error:
  
  [Waiting for the field to complete the construction...]
  [11: 43:51] Creation of integrated Weblogic domain...
  [11: 44:39] integrated Weblogic domain Extension...
  [11:45:18] integrated Weblogic domain completed successfully.
  Using the 7101 port *.
  "C:\Documents and Settings\b.othman\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\bin\startWebLogic.cmd"
  [waiting for the server to complete its initialization...]
  The system does not have the specified path.
  .
  .
  Arguments of memory in JAVA:
  .
  Start mode of WLS = development
  .
  CLASSPATH =
  .
  PATH=C:\app\hiba\product\11.1.0\db_1\bin; C:\Windows\System32; C:\WINDOWS; C:\WINDOWS\System32\Wbem
  .
  ***************************************************
  * To start WebLogic Server, use a username and *.
  * password assigned to an administrator-level user. For *.
  * server administration, using the WebLogic Server *.
  * the http://hostname:port\console console *.
  ***************************************************
  from weblogic with the Java version:
  Java version "1.6.0_24".
  Java (TM) SE Runtime Environment (build 1.6.0_24 - b50)
  Java Client VM (build 19.1 - b02, mixed mode)
  WLS starting with line:
  C:\Oracle\Middleware\jdk160_24\bin\java-Dweblogic.Name=-Djava.security.policy=\server\lib\weblogic.policy-Djavax.net.ssl.trustStore=D:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks-Dweblogic.nodemanager.ServiceEnabled=true
  Use: java [-options] class [args...]
  (to execute a class)
  or java [-options]-jar c [args...]
  (to execute a jar file)
  
  where options include:
  -customer to select the 'client' VM
  -Server to select the 'server' VM
  -hotspot is a synonym for the 'customer' VM [obsolete]
  The default VM is a customer.
  
  -cp < search path for class directories and zip/jar files >
  -classpath < search path for class directories and zip/jar files >
  C are separate directories, JAR archives list.
  and ZIP archives to search for class files.
  D < name > = < value >
  set a system property
  -verbose [: class: gc: jni]
  turn on verbose mode
  -a print product and output
  -version: < value >
  requires the version specified to run
  showversion - product print version and continue
  JRE - restrict search | JRE - No.-restrict-search
  include/exclude user private JRES in the version search
  -? -allow to print this help message
  X - print help with non-standard options
  -ea [: < packagename >... |: < classname >]
  -enableassertions [: < packagename >... |: < classname >]
  enable assertions
  -da [: < packagename >... |: < classname >]
  -disableassertions [: < packagename >... |: < classname >]
  disable assertions
  ESA | -enablesystemassertions
  activate the system asserts
  DSA | -disablesystemassertions
  disable assertions of system
  -agentlib: < libname > [< options > =]
  load the library native agent < libname > example - agentlib: hprof
  See also, agentlib -: jdwp = help and agentlib -: hprof = help
  -agentpath: < path > [< options > =]
  load the library native officer of full path
  -javaagent: jarpath > [< options > =]
  agent of loading Java programming language, see java.lang.instrument
  -startup: < imagepath >
  display the home screen with the specified image
  Process is complete.
  
  I think that the problem in calling java cause there is no class name or jar to call
  
  I need some help with that
  
  Thank you

  Try to set the JDEV_USER_DIR environment variable to point to a directory of user JDeveloper without spaces inside. Make sure that you restart JDeveloper after him.

• HP G72: Hp G72 screen problem when starting computer

  Then when I booted my computer one day the screen was red everywhere where black pixels were supposed to be so I opened the laptop, because I thought it was a connection to the problem of the motherboard, so I disconnected all the wires and the flat wire on the motherboard and pluged all back in their original locations, then when I started the computer it lights , but there weren't any windows starting thing was only in black. I think it's maybe because when I pluged to hide in one of them couldn't have properly.

  If someone could tell me what is wrong with the computer?

  Hi @1megahaloman

  Welcome to the HP Forums!

  This is a fantastic place to find answers and information!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  How can I find my model number or product number?

  I understand that your screen is red everywhere where black pixels should be. You have opened the laptop to check the connections. You unplugged and replugged everything on the motherboard and reassembled.  Now, when you try to start Notepad, you see the computer turn on but the screen remains black or white.

  Here is a link to the HP - black screen troubleshooting laptops with no. Error Messages at startup or boot which should help to determine the cause.

  Here is a link to HP G72 Notebook PC Maintenance and Service of Guide. Please note Chapter 4 for removal and replacement procedures. This can help you determine if you have replaced all connections correctly.

  Good luck!

• get the problem when starting native/cascades beta sdk - "QML preview is not available.

  Hello friends,

  When I start native/cascades sdk beta (latest version). It shows an error message "QML previw is not available. I am also attaching the screenshot of it. And my PC has no external graphics card.

  Please tell me why I get this message?

  Thank you best regards &,.

  Dinesh

  Hello dinesh,

  Looks like you don't have a graphics device that supports the preview mode. You must have a fairly modern graphics chipset with sufficient support to use the live preview Momentics openGL. Details are provided in the section 'Manufacturer of Cascades' to https://developer.blackberry.com/cascades/download/releasenotes/. Unfortunately, unless you upgrade your graphics card, you should probably use the Simulator or device to display your user interface.

  Tim

• Problem when creating a report with a date of schduled

  When I tried to create a report with a schedule (any option except now) I get the error 'Date of the first report occur must be after or equal to the current date", unless I have use a date of 01-10-2012 or later in the first report occurs on the field.  Current date is 2012-08-23.

  Let me know if you can recreate it and if or when there is a fix.

  Hi Tim,.

  We have fixed the problem now. Could you please check that you are able to schedule a report now with start date of today?

  Thank you

  The OnPlus team

• Problem when starting

  While my system is starting, on the start screen it does not display the tiles? and what is to be pinned to the taskbar also disappeared. Now I start my system through assistance in the start menu.

  Hello

  We would like to know the following details from you to help you to come.

  (1) you have an another user account to which you signed?

  (2) did you uninstall all apps?

  I suggest you to check the problem under another user account if you have or you can create a different user account and check it out. Follow the steps below to create a user account.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-8

  Write us with the asked details and the status of the issue. We will help you to come.

• Problem when start WLS_REPORTS

  I use weblogic 10.3.6 and form & report 11.1.2 when I try to start WLS_REPORTS there is exception appears, any suggestions

  weblogic.management.DeploymentException:

  to weblogic.application.internal.flow.BaseLifecycleFlow$ CreateListenerAction.run (BaseLifecycleFlow.java:176)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  to weblogic.application.internal.flow.BaseLifecycleFlow$ BaseAction.invoke (BaseLifecycleFlow.java:104)

  at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:117)

  Truncated. check the log file full stacktrace

  Caused by: java.lang.ClassNotFoundException: oracle.reports.admin.runtime.lifecycle.ReportsVersionLifecycleListener

  at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)

  at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:425)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:358)

  at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:179)

  Truncated. check the log file full stacktrace

  Hello.

  My first guess would be that there is something wrong with the installation. The error says that the found the java class weblogic server that is part of the Oracle reports. There is a problem with the classpath. But that's just my guess.

  How do you start wls_reports? From the console of administration or the CLI?

  Best regards.