problem with a copy of the mc

Similar Questions

• I bought a laptop with a copy of the chrages of win 7 and won't let me not updated (didn't know at the time) if I buy the 8 victory will this solve my problem

  I bought a laptop with a copy of the chrages of win 7 and won't let me not updated (didn't know at the time) if I buy the 8 victory will this solve my problem

  You don't want to buy win8 until you have verified first this portable machine provides win8 drivers, or you ran the tool to advise win8 update.

  PS You are sure that your version of win7 is bad, or are you just a «can be victum msg»

  Your laptop has a restore partition hidden, from where you can restore you to factory State?

• my computer will not install itunes 10.5, it tells me "Setup has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2330.

  original title: Itunes problem

  my computer will not install itunes 10.5, it tells me "Setup has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2330. "What should I do?

  Contact the manufacturer (Apple) of the application (iTunes) you are having problems with.

  Uninstall all previous versions, try to download (re-record not running) and then do a right click on it and RUN AS ADMINISTRATOR.

  (Vista 32-bit or 64-bit)?

• Problem with Windows Update after the new installation of Windows 7 Pro the Lenovo ThinkPad X 200

  I'm trying to do a fresh install of Windows 7 Pro on a Lenovo ThinkPad X 200. The product key is easy to find on the sticker of the ThinkPad. However, the version of Windows is hidden (for example, I can't check that my ThinkPad had originally installed Windows 7 Pro). I was able to install by using a Pro Win 7 SP1 CD ROM I bought for another installation. I used the ThinkPad I was trying to make the new facility on the product key. I was able to activate the Windows 7 Pro using the phone call and my cell phone. I checked the activation! However, I have problems with Windows update. The product key may be a different version of Windows 7. If so, why did it install and activate OK? Y at - it a fix for this problem or I have to buy a new version of Windows 7 Pro? Please note that I have not yet installed all drivers Lenovo ThinkPad as I can't seem to install correctly. Thank you!

  Since the issue is updated to Windows, it is not a product number key.

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

• Problem with silverlight download, download the error code 2104.

  Original title: problem with Sliverlight download
  get the error code 2104. tried to uninstall and reinstall

  Hello

  Thanks for the reply.

  We are pleased to know that the problem is solved. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows. Please contact the Windows community.

• I have problems with my application of the java language.

  I have problems with my application of the java language. It will be open only for about one second, and it won't let me write all programs, it looks like the command prompt when opening. what the * is underway and what can I do to solve this problem.

  Hey Kevin,

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it.

  I would really appreciate if you could answer the following questions:

  1. is the specific question of the application of the Java language?

  2. did you of recent changes made to your computer before the show?

  3. you receive an error code or message?

  Please provide us with more information on the specific question to help you to fix as soon as possible.

  If the problem is specific to the Java application, then I suggest you to contact Java support from the links below:

  http://www.Java.com/en/download/support.jsp

  Java Help Center:

  http://www.Java.com/en/download/help/

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• I have problem with value NULL when the use CASE statement please help this question

  I have problem with value NULL when the use CASE statement please help this question

  
  

  Table: digital_val

  SNO cl C2

  1 San1 11

  2 22 San2

  Actual result: expected to A         B

  A            B                                                                           11        22

  11 NULL

  22 NULL

  
  

  
  

  query:

  Select case when c1 = "san1" then c2,.

  case If c1 = "san2" then c2 B

  of digital_val

  I'm more curious why, when you select 2 rows, you expect a result of row?

  WITH digital_val

  AS (SELECT 1 AS 'Sno', 'San1"C1, c2 FROM DUAL 11)

  UNION ALL

  2 SELECT AS 'Sno', 'San2"C1, c2 FROM DUAL 22)

  SELECT CASE WHEN c1 is "San1" THEN END AS A c2.

  CASE WHEN c1 = "San2" THEN END AS B c2

  OF digital_val;

  With no other input, if you select 2 rows, you get 2 rows.  One of the other solutions use a max function, but is this really what you want, does not specify?

• Bridge does not open? Initially the 8.1 Win & problem had started. Have now earn 10 & still a problem with not to open the bridge?

  Bridge does not open? Initially the 8.1 Win & problem had started. Have now earn 10 & still a problem with not to open the bridge?

  Hi Matthew,

  If you use Bridge CC, update to the latest version 6.2. Adobe Bridge CC 6.2 version now available! Adobe content corner

  1. Please, do a right-click on the bridge on the desktop icon and select "Run as Administrator".
  2. If this does not help, reset the Bridge preferences and then try it.

  Steps: -.

  Start Adobe Bridge, and immediately press Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS down) until the dialogue box reset settings appears.

  Select all three options - reset preferences, reset Standard Workspaces and all miniature Purge Cache - and then click OK.

  Reference: troubleshooting errors, freezes | Adobe Bridge | Windows, Mac OS

  Let us know if it works.

  Kind regards

  Assani

• problem with bind variables in the SQL query view object

  Hi all

  I use JDev 11.1.2.4.0.

  I have a problem with bind variables in the SQL query view object.

  This is my original SQL

  SELECT sum(t.TIME) , t.legertype_id
  FROM LEDGER t
  WHERE t.nctuser_id = '20022' 
        AND to_char(t.insertdate,'YYYYMMDD') in ('20130930','20130929')
  group by t.legertype_id
  

  In my view .xml object query tab, I am writing this

  SELECT sum(t.TIME) , t.legertype_id
  FROM LEDGER t
  WHERE   t.nctuser_id = '20022'
      AND to_char(t.insertdate,'YYYYMMDD') in :dddd
  group by t.legertype_id
  

  Davis here is a variable of Type liaison: String, updatable and necessary.

  I try to deal with Davis as ('20130930 ', ' 20130929') hoping the view object, run as my original SQL.

  But failed. The view object retrieves 0 line after that I run.

  Why?

  Thank you! ('2original SQL0130930', '20130929') ('20130930 ', ' 20130929')

  A variable binding cannot be used as this is why you must use years table. Check decompilation binary ADF: using oracle.jbo.domain.Array with ViewCriteria to see a solution.

  Timo

• Problem with Mail storage on the iPhone 6.

  OK, I have a problem with my mail. That is, it uses 1.2 GB of data. I cleaned all my emails and deleted all the big files. Nothing has changed. So I deleted all e-mail accounts. Still no change. When I plug my phone in iTunes, it says there 2.49 GB free yet my phone says I only have 337 MB of free space. Yes, I tried to sync and see if that has nothing and he did not. No idea what continues?

  Try to reset your email account in this order.

  First close your Mail application completely from the window of the selector app by double clicking the Home button and drag the email preview pane up until it disappears from the display. Then go to settings > Mail, Contacts, calendar > find your e-mail provider and click on the account. On the next page, delete the account. Then perform a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. Then go to settings > mail... and to add the account.

  iTunes and iPhone storage almost never fit. The amount of iTunes is an estimate, the phone is the exact amount.

  Different amounts of 'Available' reported by iPhone and iTunes

  If the above is not enough, you may need to do a system restore. First save your device via iTunes. Also import your photos on your computer and copy all the important data. Reconstruction of the support first test and test. If this does not help, you may need to restore as a new and reconfigure from scratch as the backup may be damaged. It is important to have your photos and your saved data separately from the backup. Here are the steps for a restoration:

  https://support.Apple.com/en-us/HT201252

• Error Message - Windows Media Player cannot play this DVD because there is a problem with digital copy protection

  I received the following message when trying to play a DVD:Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card. I'm confused that nothing has been changed, added, or updated my system up-to-date. I am running Windows 7 Premium home 64-bit edition. DVD plays fine on my laptop with the same operating system.

  CORRECTION OF THE PROBLEM.

  I can confirm that it is a matter of the DVD CSS protection. MediaPlayer, being unable to decrypt the DVD protection.

  Googled around for "DVD43". The installation program will install a driver that will successfully decrypt DVD protection and will allow you to PLAY the DVD MOVIE ONCE AGAIN!

  Well, that's an alternative. All what I can say is that Microsoft Media Player is broken!

• Low use of networks with a copy of the Windows 7 TO Windows 2008 Server client

  Using Windows 7 ultimate and Windows Server 2008 R2

  Two machines, connected via LAN 1000base-T with CAT5e, with a full duplex 1 GB switch between... and Yes, I tried swapping the cables and ports. Server has two RAID5, a tray of 6 and a tray of 8. Resort of work has two RAID5, a 3 SSD and a tray of 4. Both sides with the help of Intel CPU iX and a 811xC chipset RealTek Gb LAN, same latest LAN drivers on both machines. Static, client IP address in a workgroup and server a domain controller for a domain (have not tried to join the client to the domain yet).

  I use Windows Explorer to COPY a set of files of 20 GB... I also tried xcopy and robocopy, with similar results. I tried all suggestions concerning the card settings network about unloading of duplex, big package, DRC, some changes to netsh (RSS and autotune) and a few others. Nothing has really affected the rate of final transfer significantly improve the use (and backup speed - the whole point of this exercise).

  Server to server disk 2 Disk1: > 250 MB/s (server disk IO is not a problem).

  Server to server disk 1 Disk2: > 250 MB/s (server disk IO is not a problem).

  Workstation Disk1 to Disk2: > 150 MB/s (workstation disk IO is not a problem).

  Workstation for Disk1 Disk2: > 150 MB/s (workstation disk IO is not a problem).

  Now for the IO: first a base line by using the server-side Windows Explorer to copy a Client mapped drive to a local drive on the server:

  -Disk1 (D :) Server Workstation Disk2(Z:): 91MB/s (près de 100 % d'utilisation de LAN).))

  Everything looks good so far, but we will retry the same operation, but use Windows Explorer of the customer to copy a disk server mapped to a client local drive:

  -Disk2 workstation to the server Disk2: 25 MB/s down to 17 MB/s; sometimes as low as 9 Mbps. average about 20% use.

  It seems that there is something in Windows 7 that prevents fast passes; or something in Windows Server 2008 that blocks quickly gets. I put the client and server-side receive the training for people with reduced mobility, normal, highlyrestricted and experimental, in different combinations. Once again, nothing concrete to report as an improvement.

  The MS Gurus, which suggests that I do with NetMonitor as well as capture something worth their time to diagnose?

  People - I think I finally found the culprit - and I feel pretty stupid not finding it earlier. No of MS technicians also shoot quite appalled could help.
  Disable Windows Search service (a service of indexation).
  It seems if you never 'change' which is sought (such as adding a new disk, the oath of research), the service will begin to read all the files that are deleted or added to the field of research. If you move, copy, even delete files will incur the wrath of Windows Search indexing delays.
  Once again:
  Turn off / disable - Windows Search - service to start.

• Problem with him copy / paste

  Hello

  I had problem with copy (or cut) and paste the object from one layer to another. I want to cut the object and paste it into another layer... but I can't. For some reason any after update I can paste items only on the layer where I copy from. Even if the layer is locked. I can't work with this. Does anyone have similar problem? Thank you.

  Sergey,

  Uncheck the paste remembers layers in the layers flyout/list drop-down palette.

• Problems with Windows 7RC in the Boot Camp Partition

  I have Windows 7 RC (32-bit) running on a Boot Camp partition on a 2nd generation of MacBook Air.  When I try to load it in VMWare Fusion 2.04, I get a BSOD just after the "Starting Windows" screen finishes loading.  It says that Windows has detected a problem, try to restart and executes the boot system diagnostic tool, nothing helps.  I tried implementing VMWare using Vista and Windows Server 2008, 1280 MB RAM and 3D on and outside.  Any ideas?

  akuska wrote:

  I have Windows 7 RC (32-bit) running on a Boot Camp partition on a 2nd generation of MacBook Air.  When I try to load it in VMWare Fusion 2.04, I get a BSOD just after the "Starting Windows" screen finishes loading.  It says that Windows has detected a problem, try to restart and executes the boot system diagnostic tool, nothing helps.

  At the time current Windows 7 in any version is not supported by Apple on the Boot Camp partition, nor is it supported in any way under Fusion.

  Although it is not supported, it will work however it depends what Guest select you when the virtual machine based on the creation of a regular file.  I don't got no problem using Windows Server 2008, when the virtual machine based on the creation of a regular file.

  On your Boot Camp partition was a clean build or you have an existing Boot Camp partition previously Virtual Machine.  If you had a Boot Camp existing partition previously Virtual Machine then try the following.

  ====================

  Note: These senses are different which have already been posted so read and follow through... Note: These steps assume that you have a single Apple to default installation of Windows on a single Boot Camp partition and Boot Camp of VMware Fusion single default partition Machine virtual (without a snapshot *) and if you have changed the partition Boot Camp Virtual Machine to add additional hard disks to be virtual or RAW disk then do not use these instructions unless you backup the Boot Camp partition the Machine package virtual first. * Also note that Fusion 2.0.0 may accidentally have a snapshot with the virtual partition Boot Camp Machine and it should not have, then you should check to ensure that the condition does not exist as well. (With merger closed if the partition Boot Camp Virtual Machine package is over 1 MB in size, then you might have a snapshot in place and do not continue with these instructions.)

  ===

  1. If the merger is open, close it.

  2. in a Terminal (/ Applications/Utilities/Terminal) copy and paste command, as the following and then press Enter and it will delete the partition Boot Camp Virtual Machine of the metadata and the Virtual Machine to help.

  Note: This does not affect the Boot Camp partition install windows in that it does not remove it.  Also be sure you copy all the command line below, as well as, "RM" at the beginning of the ' (quote) after the s in the Machines. "

  RM - dfr "/Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines/Helper/naos-1.0.vmwarevm/vmware.log ' ~/Desktop/Helper_vmware.log

  ====================

  I tried implementing VMWare using Vista and Windows Server 2008, 1280 MB RAM and 3D on and outside.  Any ideas?

  VMware is a company so I doubt that you have implemented the company however, your statement is a bit ambiguous because it is not clear if your always talk your partition Boot Camp Machine virtual matter in Fusion, you tried to select each of them as an OS on the entrance of Boot Camp partition on the Virtual Machine library and it didn't help the Boot Camp Virtual Machine partition number or to be issues with creating virtual machines with these operating systems.

• Problems with Mail running under the Sierra

  Mail does not display / download (PDFs, etc) attachments in emails that are sent to my e-mail hotmail.com account. The correct size of the email received is indicated, but the ether attachments are not visible or are not complete. This problem occurs only with the emails that are sent tony hotmail account, another account of e-mail (gmail, web.de, mail etc.) are not affected by this problem. I already deleted the account and reinstalled, resynchronized the account, check the correct IMAP - settings, nothing worked. Now, I demoted via Time machine to El Capitan. Now, everything is shown correctly without attachments are missed under El Capitan. Because the time machine really not added some attachments I ve some files lost unfortunately! Very good performance! I really disappointed m from Apple!   Is there a solution for this problem?

  Often, with large attachments; I could not find a systematic reason I don't have a hotmail account, but just a normal IMAP account.