Problem with actions corrective oem 12 c

Similar Questions

• Problem with Action Ball cc

  I have a little problem with my 3D scene. I do a screen similar to the tutorial video Copilot pixel

  This one:

  Pixel screen Experiment - YouTube

  My problem is the dirt on the screen. It's just a picture on top of my demo with mix of fashion on the screen game. But the problem is that its looks like images with dust is floating in 3D I mean its the same Z value as my demo (0.0 °) that I'm trying to fix the images above but it looks like there ore value (5 °) something like that. It looks fake like that so I ask is there is a solution to this?

  I use Adobe CC

  What the others said. CC Ball Action, unfortunately does not meet in the same way as the native 3D layers 3D cameras. Depending on what you're actually trying to do, you can get by with the help of effects not 3D, for example by using a corner pin effect and warping manually the dirt in place. Also try to keep the dirt in a separate with its own camera model and bind it with selector expressions to your another comp, then mix everything in another comp. This way you can be able to work around the problem by playing with focal length or even apply remedial effects on the demo.

  Mylenium

• Problem with action links

  I have a relatively simple DVD project with 10 film sequences, each placed on a separate timeline. DVD has one menu with a button: "Watch the movie" which basically sequences all the clips of 10, then back to the menu.

  Then I also 10 sequence of keys in the menu that should show only the respective sequence, then back to the menu.

  1. I set up the sequence of actions to "Watch the film in full' m1-m2-m3-m4-m5-m6-m7-m8-m9-m10-menu. No problem with that.

  2. when I began work on the first button of the 'STAGE 1' sequence, the problem starts. I want it's just Scene1-return to the menu. I tried without and with the end action override , but then I have troubled the m1-m2-m3-m4-m5-m6-m7-m8-m9-m10-menu order.

  I couldn't really understand this simple task. Maybe someone can give me a hint.

  1. I set up the sequence of actions to "Watch the film in full' m1-m2-m3-m4-m5-m6-m7-m8-m9-m10-menu. No problem with that.

  In fact, it is the problem. Instead of doing the action of the end of each scenario the following timeline, create a Playlist and sequence timelines in there. Your game all button links to the reading list. End action of the playlist is to return to the last menu.

  Without the end actions that go for the next film, your scene buttons will work fine. (The end on each script action will be 'Back to the last Menu.'

• Problem with action in IE button styles

  Apex Version: 4.1.1.00.23

  Theme: 24 cloudy (with customizations to the wrapper around the body section.)

  Hello

  I used a number of interactive reports in an application that I use.

  For some reason any when I clock on Actions > select columns option, the 'Cancel' and 'Apply' that are buttons do not appear in the same gray style which is the "Actions" button

  This problem does not occure in Chrome of Firefox, but it happens in IE8 and IE9.

  I understand that it is more likely that IE does not properly return a css style.

  Does anyone have a css patch or solution for this?

  The client I use the App for using Internet Explorer.

  See Image example here: https://plus.google.com/u/0/photos/search/%23All?pid=5946337915648389938 & oid = 104459804528712563956

  Sincerely, Amanda.

  Amanda

  This has come up before. See: weird IRR button colors in Internet Explorer (only!) for an explanation and correction.

• Problem with actions undo/redo in CC2014 (Mac)

  I meet incredibly strange behavior in Dreamweaver CC2014 with shares of cancellation/recovery Mac OS: so that editing html and css to multiple files in a single site all my changes through all files are saved as a single list of changes. I mean if I change one file, then others and then return to the first file and try to undo the changes it, I can't do that by pressing on that cmd + Z begins to undo all my actions in other files.

  It's incredibly strange, illogical and painful problem that makes it easy to edit several documents at the same time almost impossible.

  Or is this an intentional behavior? He breaks all the rules of multi-documents applications!

  Believe that I found the answer to my question: http://helpx.adobe.com/dreamweaver/using/whats-new-2014.html#Undo/Redo improvements

  Undo/Redo improvements

  Undo/redo all actions are recorded at the level of the HTML files. In other words, any manual changes to a CSS file can be cancelled related files.

  Someone called Undo/Redo improvements! It's the stupidest thing one can imagine all undo/redo! How the hell edition file a source affects the other. Do what you want using the designer, but I am changing the SOURCE CODE and must be able to undo/redo my actions at the file level.

  With this change, TextEdit or Notepad becomes a more appropriate tool for editing HTML/CSS in Dreamweaver.

• Problem with action dynamics and button

  Hello
  
  I have a form of muti-region I have operational by using the region view selector. On one of the areas I wanted to create a reset button, where some elements within this region may be reset by the user if they wish. I tried to create a button associated with a dynamic action (DA), but the app has complained to telling me that I had to have a button template that refers to #BUTTON_ID #. So I created a custom button template even though I don't know if I'm referencing the #BUTTON_ID # correctly. In addition, even if the button is onclick variety, when I click on it nothing doesn't seem occurs. Because I copied this model to another model of button, I noticed that there is an onclick reference in the template itself and I'm not clear whether still there or not. This onclick event references #LINK # which would theoretically take me somewhere else, so I don't think how it's Setup is correct. I have included the template button below.
  
  "< button value =" "#LABEL #" onclick = "#LINK # ' #BUTTON_ID # class ="grey button"type ="button">
  < span > #LABEL # </span >
  < / button >
  
  The OnClick event should be included in this model, or is DA already knows it's an onclick event so it's not necessary? The #BUTTON_ID parameter # referenced is correct in this model? Since I PLSQL code running via this button which told him to actually run this code? I looked at a few examples of custom button models used with DA, but they are few and far between. Any help on this would be greatly appreciated.
  
  Published by: apexguy on September 28, 2011 09:20

  Hello

  Try to add id button in the model of button as below:

  
  #LABEL #.
  

  Concerning
  Jean Claude

• Problem with auto correction

  Hello.. I'm trying to use AutoCorrect in InDesign CC 2014. But it does not work. I go to the menu-> Edit-> Preferences-> AutoCorrect-> enable Automatic Correction and still does not work.

  And the second problem is the police 'Chartwell '. I can't find it in Typekit. I think that there is more.

  You have not provided sufficient information:

  1. OPERATING SYSTEM
  2. Version
  3. Language of the style of paragraph that you use or the character style that can substitute the language properties.
  4. What measures did you activate the automatic correction (for the correct language?)
  5. What is going on.
  6. What do you expect.

• problems with actions - why can´t I save my changes on adjustment layers

  I use Photoshop CC 2014 on OSX 10.7.5.

  Today I started to record an action. I added a few adjustment layers and made some adjustments. But the action has recorded only the addition of adjustment layers, but not the setting or change I did on those layers.

  That's happened? The last time I saved it all worked stocks...

  Help, please

  You have photoshop cc 2014.2.0?

  In photoshop under help > System Info, the version should be the top line.

  I could reset the 2014 cc photoshop preferences and see if it makes a difference.

  Hold down the Command + Option + shift keys to start photoshop

  Keep possession of the keys down until you get a dialog box asking if you want to delete the adobe photoshop settings file

  Press Yes because you don't

• PROBLEMS WITH ACTIONS IN CS5.5

  I JUST UPGRADED TO CS3 CS5.5.  I HAVE STOCK THAT I CREATED IN CS3 WHICH DON'T WORK IN CS5.5 AND I WAS WONDERING IF ANYONE KNOWS WHY.

  THE ACTION I HAVE IN CS3...

  STEP 1: SELECT ALL

  STEP 2: CHANGE X VALUE TO 1,4375 (IN THE TRANSFORMATION PANEL)

  STEP 3: CHANGE THE VALUE Y A.762 (IN THE TRANSFORMATION PANEL)

  IT IS EVERYTHING! IT IS A SIMPLE CENTERED ALL ART ON MY MODEL.  WHEN I USE THE SAME ACTION IN CS5.5 IT DOES NOT WORK. IT JUST MOVES IT TO RANDOM PLACES. ANYONE KNOW WHY?

  I'M ON A PC, WINDOWS XP

  AICS5.5 the origin of the page is now at the top left instead of down to the left, then all values of y must be negative to get the same result.

• problem with access point or wireless adapter, a network cable is not plugged in correctly or may be broken

  I recently purchased the 8 Envy Touchsmart PC Notbook HP windows. Immediately I put in place, and everything worked well - even on the Internet, unfortunately has an hour or so I started to have problems with Internet... I go through the process of diagnosis to do repair, but that did not help much, so I updated my laptop. For a few minutes, it worked, and then the problem once more. Frustrated, I checked my other laptop (which I use to write this), and the network was very good. In fact, all my other WIFI device did not appear to have problems. Anyway, thinking it would help, I connected to my router, changed my mac address, it did not work so I had to go back to the default Mac setting. I ran troubleshooting 300 times or more, but who has not fixed my problem at all.

  I checked my network card, it is updated... I see no problems with it at all. I checked every setting in there, but there seems to be no problem. sometimes windows network diagnostics say found problems, he's talking about wireless /wifi ip is not configured or something, I don't remember the exact words. He would say that it is connected, but I see the yellow sign that appears on the wireless icon. He would also say «identifying...» "A minute im connected and then the next day it does not.
  I do of course when it comes to setting basic stuff, but it's just beyond my comprehension. I can't point the question of the pint. I just did a complete reset, in the hope that he would go back to its default setting if I have deleted or destroyed something by accident, but I still have questions. Can someone help me please. I am frustrated and fed up frankly at this stage.
  Please get back to me as soon as possible, because I have important files on this laptop that I need to download on my drive of google.
  Thank you.

  Hi Fergiey,

  When you run the network troubleshooting tool and which indicates that the wireless IP address is not configured correctly, I suggest that you reset the stack TCP/IP and check if that helps.

  One of the components of the Internet connection on your computer is a package of instructions called TCP/IP. TCP/IP can sometimes become damaged or altered. If you can't connect to the Internet and you have tried all other methods to solve the problem, TCP/IP can be causing it.

  TCP/IP is a main component of Windows, you cannot delete it. However, you can reset TCP/IP to its original state by using the NetShell (netsh) utility.

  The reset command is available in the context of the NetShell utility IP. Follow these steps to use the reset command to reset TCP/IP manually:

  Steps: what please refer:

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  a. open an command prompt, press the Windows key + X select prompt as an administrator.

  b. When the user account control box pops up, click on Yes.
  c. at the command prompt, copy and paste (or type) that follows the command, and then press ENTER:

  netsh int ip reset c:\resetlog.txt

  
  d. Note: If you do not specify a path of the directory for the log file, use the following command:

  netsh int ip reset resetlog.txt

  c. restart the computer.

  d. When you run the reset command, it rewrites two registry keys that are used by TCP/IP. This has the same result as the removal and the reinstallation of the Protocol. The reset command rewrites the following two registry keys:

  SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\
  SYSTEM\CurrentControlSet\Services\DHCP\Parameters.

  e. to run the manual command, you must specify a file name for the log, in which the action takes netsh is recorded. When you run the manual command, TCP/IP is reset and the actions that have been taken are recorded in the log file, called resetlog.txt

  Please post with the State of the question.

• problems with some Web pages won't load does not correctly

  I have had problems with pages loading correctly but have not been able to solve the problems. I also tried to create a screen shot without success apparently. It is with all Web sites are not only some here and there. Sometimes if I navigate to the power and return to this page, he can solve the problems but more often than not, it does not solve the problem. I also use another browser such as google chrome or firefox and not met the same problem. The same page loads correctly and as expected. I appreciate your help in this matter and I did some of the steps in the frequently asked questions and what you all have suggested to solve the problem as clear the cache, etc. in case of problems, but it does not permanently fix

  my Firefox isn't properly loading page please solve... example

• Problem with sync error: synchronization has encountered an error during synchronization: unknown error. Sync automatically retrying this action.

  Hi, I started recently a problem with the sync on my desk. My partner Android and Mac laptop no problems when you attempt to synchronize, but office always gives the same error. I tried to disconnect from the desktop computer, erase all files, restart and then adding the Office to synchronize once more, but the error persists.

  All bookmarks on the desktop disappeared, but are still in my sync data and have no problem being viewed on other connected devices. It also tells me that the issue is not the sync server and that there is something unique to the desktop machine.

  I hope that this will not require a reinstall, but if all else fails, it's an option. I'll try to attach a log file once I put the question.

  I think the error message is in the title of the thread:
  
  Sync has encountered an error during synchronization: unknown error. Sync automatically retrying this action.

  Try creating a new profile as a test to check whether your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• I just bought an IPhone 6 Plus. When I get a text Message I get no advice or vibrations. I have all the settings correct. I know many others with the same problem with this phone. Any suggestions?

  I have just purchased IPhone 6 Plus. When I get a text Message I get no notification - no vibration and no noise. I put everything correctly. I know several others who have the same problems with this phone. Any suggestions?

  I have the same problem. You own an iPhone 6 Plus 2/9. Problems began the next day. Phone took over and got another new. Problems with another brand new! Volume is also impoverished - even when up until the end. Extremely frustrated! Any advice would be appreciated.

• Problem with table of waveform: time scale do not see the time correctly

  Hello

  I have some problems with a graphic.

  I want to display data, and the duration between two unique data can vary. It's something between 50ms and 500 ms.

  The problems I have:

  1. the time is not correctly displayed in the graph (allways 02:00:10 instead of the current time)
  2. the data points in the table have a distance of 1 s (x-scale). This is not correct.

  I've tried several things, but I thinkt that I am on the wrong track.
  Could you please help me?

  Johannes

  LabVIEW 7.1 (!)

  

  I'm sorry. The property on the left node was not necessary...

  

• Web proxy settings are not configured correctly. Have problems with games and other applications.

  original title: apps do not correctly configured

  The default Outlook Express mail, The default Outlook in the Express News with the Internet Explorer Web Proxy are not configured correctly. Because I had problems with the game apps and stuff in my email address.

  Hello

  · You receive an error message or error code?

  You can access the links below:

  How Set Up Outlook Express - and http://support.microsoft.com/kb/2409264

  To configure the web proxy:

  HOW to: Configure Internet Explorer 6.0 as a Web Proxy Client in Windows 2000

  http://support.Microsoft.com/kb/310296