problem with add or reduce the photos

Similar Questions

• my computer will not install itunes 10.5, it tells me "Setup has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2330.

  original title: Itunes problem

  my computer will not install itunes 10.5, it tells me "Setup has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2330. "What should I do?

  Contact the manufacturer (Apple) of the application (iTunes) you are having problems with.

  Uninstall all previous versions, try to download (re-record not running) and then do a right click on it and RUN AS ADMINISTRATOR.

  (Vista 32-bit or 64-bit)?

• Problem with Windows Update after the new installation of Windows 7 Pro the Lenovo ThinkPad X 200

  I'm trying to do a fresh install of Windows 7 Pro on a Lenovo ThinkPad X 200. The product key is easy to find on the sticker of the ThinkPad. However, the version of Windows is hidden (for example, I can't check that my ThinkPad had originally installed Windows 7 Pro). I was able to install by using a Pro Win 7 SP1 CD ROM I bought for another installation. I used the ThinkPad I was trying to make the new facility on the product key. I was able to activate the Windows 7 Pro using the phone call and my cell phone. I checked the activation! However, I have problems with Windows update. The product key may be a different version of Windows 7. If so, why did it install and activate OK? Y at - it a fix for this problem or I have to buy a new version of Windows 7 Pro? Please note that I have not yet installed all drivers Lenovo ThinkPad as I can't seem to install correctly. Thank you!

  Since the issue is updated to Windows, it is not a product number key.

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

• Problem with silverlight download, download the error code 2104.

  Original title: problem with Sliverlight download
  get the error code 2104. tried to uninstall and reinstall

  Hello

  Thanks for the reply.

  We are pleased to know that the problem is solved. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows. Please contact the Windows community.

• I have problems with my application of the java language.

  I have problems with my application of the java language. It will be open only for about one second, and it won't let me write all programs, it looks like the command prompt when opening. what the * is underway and what can I do to solve this problem.

  Hey Kevin,

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it.

  I would really appreciate if you could answer the following questions:

  1. is the specific question of the application of the Java language?

  2. did you of recent changes made to your computer before the show?

  3. you receive an error code or message?

  Please provide us with more information on the specific question to help you to fix as soon as possible.

  If the problem is specific to the Java application, then I suggest you to contact Java support from the links below:

  http://www.Java.com/en/download/support.jsp

  Java Help Center:

  http://www.Java.com/en/download/help/

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• I have problem with value NULL when the use CASE statement please help this question

  I have problem with value NULL when the use CASE statement please help this question

  
  

  Table: digital_val

  SNO cl C2

  1 San1 11

  2 22 San2

  Actual result: expected to A         B

  A            B                                                                           11        22

  11 NULL

  22 NULL

  
  

  
  

  query:

  Select case when c1 = "san1" then c2,.

  case If c1 = "san2" then c2 B

  of digital_val

  I'm more curious why, when you select 2 rows, you expect a result of row?

  WITH digital_val

  AS (SELECT 1 AS 'Sno', 'San1"C1, c2 FROM DUAL 11)

  UNION ALL

  2 SELECT AS 'Sno', 'San2"C1, c2 FROM DUAL 22)

  SELECT CASE WHEN c1 is "San1" THEN END AS A c2.

  CASE WHEN c1 = "San2" THEN END AS B c2

  OF digital_val;

  With no other input, if you select 2 rows, you get 2 rows.  One of the other solutions use a max function, but is this really what you want, does not specify?

• Bridge does not open? Initially the 8.1 Win & problem had started. Have now earn 10 & still a problem with not to open the bridge?

  Bridge does not open? Initially the 8.1 Win & problem had started. Have now earn 10 & still a problem with not to open the bridge?

  Hi Matthew,

  If you use Bridge CC, update to the latest version 6.2. Adobe Bridge CC 6.2 version now available! Adobe content corner

  1. Please, do a right-click on the bridge on the desktop icon and select "Run as Administrator".
  2. If this does not help, reset the Bridge preferences and then try it.

  Steps: -.

  Start Adobe Bridge, and immediately press Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS down) until the dialogue box reset settings appears.

  Select all three options - reset preferences, reset Standard Workspaces and all miniature Purge Cache - and then click OK.

  Reference: troubleshooting errors, freezes | Adobe Bridge | Windows, Mac OS

  Let us know if it works.

  Kind regards

  Assani

• problem with bind variables in the SQL query view object

  Hi all

  I use JDev 11.1.2.4.0.

  I have a problem with bind variables in the SQL query view object.

  This is my original SQL

  SELECT sum(t.TIME) , t.legertype_id
  FROM LEDGER t
  WHERE t.nctuser_id = '20022' 
        AND to_char(t.insertdate,'YYYYMMDD') in ('20130930','20130929')
  group by t.legertype_id
  

  In my view .xml object query tab, I am writing this

  SELECT sum(t.TIME) , t.legertype_id
  FROM LEDGER t
  WHERE   t.nctuser_id = '20022'
      AND to_char(t.insertdate,'YYYYMMDD') in :dddd
  group by t.legertype_id
  

  Davis here is a variable of Type liaison: String, updatable and necessary.

  I try to deal with Davis as ('20130930 ', ' 20130929') hoping the view object, run as my original SQL.

  But failed. The view object retrieves 0 line after that I run.

  Why?

  Thank you! ('2original SQL0130930', '20130929') ('20130930 ', ' 20130929')

  A variable binding cannot be used as this is why you must use years table. Check decompilation binary ADF: using oracle.jbo.domain.Array with ViewCriteria to see a solution.

  Timo

• Problem with Mail storage on the iPhone 6.

  OK, I have a problem with my mail. That is, it uses 1.2 GB of data. I cleaned all my emails and deleted all the big files. Nothing has changed. So I deleted all e-mail accounts. Still no change. When I plug my phone in iTunes, it says there 2.49 GB free yet my phone says I only have 337 MB of free space. Yes, I tried to sync and see if that has nothing and he did not. No idea what continues?

  Try to reset your email account in this order.

  First close your Mail application completely from the window of the selector app by double clicking the Home button and drag the email preview pane up until it disappears from the display. Then go to settings > Mail, Contacts, calendar > find your e-mail provider and click on the account. On the next page, delete the account. Then perform a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. Then go to settings > mail... and to add the account.

  iTunes and iPhone storage almost never fit. The amount of iTunes is an estimate, the phone is the exact amount.

  Different amounts of 'Available' reported by iPhone and iTunes

  If the above is not enough, you may need to do a system restore. First save your device via iTunes. Also import your photos on your computer and copy all the important data. Reconstruction of the support first test and test. If this does not help, you may need to restore as a new and reconfigure from scratch as the backup may be damaged. It is important to have your photos and your saved data separately from the backup. Here are the steps for a restoration:

  https://support.Apple.com/en-us/HT201252

• How can I add faces in the Photos for my pet

  I just bought a new IMac with Photos and have not analyzed for all faces again because I have lots of photos. I want to add a face to my pet. I have a right-click and do "Get Info" and I have a selection to only add a Description, add a location, add a keyword and add a title. Can not understand how 'Add a face'... your help is very appreciated. I actually have this problem with other photos too when I want to add a face that has not been recognized...

  You will need to enlarge the photo, then you will see a button "+" in the Info Panel to add a face.

  

  And you can activate "Show names of faces" on the view menu.

• Problems with (films) coating of the lens on the surface of the canon lenses.

  I read many comments here about how to clean the surfaces of the lens... I wonder if canon films that they promote as do wonderful things for development are not so great for cleaning? I bought an expensive lens not for long and cleaned with either lens clothing tending my opthomologist after my appointment to look for my glasses... I collect these sweet little squares, whenever I have an appointment to the eye because they are made for the purpose of cleaning of lenses... Houston is a very humid climate and after doing some night shots the lens seems sticky and so I polished with the soft cloth... I have not added any sort of cleaning liquid... but I noticed when I had finished there was a blue smear on the entire surface of the lens... Really? I have not used any more pressure than the kind of pressure that you can use to clean your glasses.  This bluish smears can be removed or is permanent damage to a dear surfface...? Now I must say that I didn't notice that this smear has affectd of my photos... I found one in post processing which presents a particular lighting problem which could be linked to the surface of the lens... Other people have had problems with the 'coatings', which are added to the surface of the lens? I would like to add at least two lens more... but I'm afraid to invest again if I rish damage the surface of the lens even Polish with a soft cloth?

  Well, I think because I became so addicted to photography... I can't stand that a week shoud go I'm not shooting and post processing... then the most important investment I did in a lens so far is 800 dollars... so as you say the investment of 50 million dollars for the protective lens cover is my best insurance...

• Problem with redirect after save the wav file

  I have a photo booth / audio that we created with flash that take a photo and record then it records audio testimony and records it.  My problem is that, once the wav file is saved, I want to redirect them to a thank you page but can't seem to find a way to do it.  Here is the code that I use to manage the registration of the wav file.

  private void recordComplete(e:Event):void

  {

  var request: URLRequest = new URLRequest ("save - file.php '");

  var loader: URLLoader = new URLLoader();

  request.contentType = ' application/octet-stream ";

  Request.Method = URLRequestMethod.POST;

  Request.Data = recorder.output;

  Loader.Load (request);

  navigateToURL (new URLRequest (redirectPath), "_self")

  }

  I tried to add the navigateToURL at the end and it sends to this page correctly, but the wav file is not saved.  I was wondering if there was a way to determine that the file is saved and then redirect to a thank you page?

  Thanks in advance!

  -justin

  replace

  public var redirectPath:String = "http://localhost/thankyou.html";

  with

  not sure that this should be public but it won't matter for testing.

  public var redirectPath:String = "http://www.adobe.com";

• print photos in color with white lines on the photo

  When I print photos from my computer, the pictures have white lines running through. The color is good, but the white lines surf photography.

  Hello MaryHickey,

  If this problem is fixed after you have cleaned the print heads I think it's a problem with cartridges or heads.

  To resolve this, you will need to contact HP.

  Best regards

  Matthew_Ha

• I have a problem with a missing on the computer user account.

  Original title: problem getting back to the original account admin user

  Since the computer was new, I didn't have that one user account and didn't need a user to logon screen, when it opened to that and the only active user account. Fast forward 6 months that I had a problem with a windows installation file deleted and in order to get a program running I had to add a user account for the new installation of the user files. That part worked, but when I disconnected and tried to return to my original owner account there was only the new account on the logon screen my original account wasn't there. My files for this user account are still there in C: User but I can't find a way to get there.

  Googleing this problem I saw things about problems with the accounts being listed as AccueilCompte, or administrator, but it did get me anywhere, the only difference I've seen after going through all that I saw in Win7 Home Premium, which had to do with user accounts, it is that my original account was registered in a field as 'owner '. I don't know if it's part of the problem or not. How can I return to my original account and why isn't she appear on the opening screen of session or user accounts?

  Hello

  Welcome to the Microsoft Community and thanks for posting the question. I see that you have a problem with a user account.  Let me help you with the issue.

  1. What is the brand and model of the computer?

  2. what security software is installed?

  3. have you logged as administrator?

  To resolve this issue, let us try these methods:

  Method 1.

  You can transfer the files from the user account of old or damaged to the new user account by using the article "difficulty a user profile is corrupted.

  Difficulty a user profile is corrupted: http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Method 2.

  You can also check out this link for more information: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/how-do-i-transfer-files-from-the-original-user-to/20c78000-f1e2-4060-b02c-6f23fbbf270e

  I hope this helps. If you need further assistance on this particular issue or any other related issue Windows let us know and we will be happy to help you.

  Thank you.

• problem with tabs and filter the lines of memory cache

  Dear all I have a problem with the oaf page has two tabs under two of them consists of a table and add the button to the row. Second tab, it's a detail of the first tab, which means that each line in the first tab may refer to one or more lines in the second tab, my problem is when I add the line in the first tab and go to the second tab to add lines to this line of the display of the page added all lines not only the matching lines.

  my code:

  1 - controller

  When press Tab of Lot lines (partial action)
  If (goLotsTab".equals (pageContext.getParameter (OAWebBeanConstants.EVENT_PARAM))) {" "}

  String trxLineId = "38";//row.getAttribute("TrxLineId").toString(); "
  AddLotParam serializable [] = {trxLineId};
  am.invokeMethod ("getTrxLot", addLotParam);
  }
  What press Add button lines of lots (partial action)
  If (addLot".equals (pageContext.getParameter (OAWebBeanConstants.EVENT_PARAM))) {" "}
  String trxLineId = "38"; row.getAttribute("TrxLineId").toString ();
  AddLotParam serializable [] = {trxLineId};
  am.invokeMethod ("addTrxLot", addLotParam);
  }

  When press Add a tab line (partial action)
  If (addLine".equals (pageContext.getParameter (OAWebBeanConstants.EVENT_PARAM))) {" "}
  am.invokeMethod ("addLine", params);
  }

  Methods 2 - am

  public void getTrxLot (String pTrxLineId)
  {
  OAViewObject vo = (OAViewObject) getXXSiteLotsVO1 ();
  LinVo OAViewObject = (OAViewObject) getXXSiteLineVO2 ();

  Line linRow = linVo.getFirstFilteredRow ("SelectLineFlag", "Y");
  pTrxLineId = linRow.getAttribute("TrxLineId").toString ();

  If (!) VO.isPreparedForExecution ())
  //{
  try {}
  String existringWhereClause = vo.getWhereClause ();
  vo.setWhereClauseParams (null);
  vo.setWhereClause("trx_line_id=:1");
  vo.setWhereClauseParam (0, (pTrxLineId) Number);
  vo.executeQuery ();
  vo.setWhereClauseParams (null);
  vo.setWhereClause (existringWhereClause);
  }
  catch (Exception exceptionl)
  {
  throw OAException.wrapperException (exceptionl);
  }

  // }
  following line is commented, but I think that it will contribute to the memory of the filter
  cached data to be mapped.

  Rank [] lotRows = vo.getFilteredRows ("TrxLineId1", pTrxLineId);
  }

  /////////////////////////////////////////////////////////////////
  public void addTrxLot (String pTrxLineId)
  {
  OAViewObject vo = (OAViewObject) getXXSiteLotsVO1 ();
  LinVo OAViewObject = (OAViewObject) getXXSiteLineVO2 ();

  Line linRow = linVo.getFirstFilteredRow ("SelectLineFlag", "Y");
  pTrxLineId = linRow.getAttribute("TrxLineId").toString ();

  If (vo.getFetchedRowCount () == 0) {}
  vo.setMaxFetchSize (0);
  // }

  VO. Last();
  VO. Next();
  Line = vo.createRow ();
  row.setAttribute ("TrxLineId", pTrxLineId);
  vo.insertRow (row);
  row.setNewRowState (Row.STATUS_INITIALIZED);
  }

  

  OK, I'll share my latest code using other

  public void createTransaction() {}

  OAViewObjectImpl vo = getXXSiteHeaderVO1();

  If (! vo.isPreparedForExecution ()) {}

  vo.executeQuery ();

  }

  If (vo.getFetchedRowCount () == 0)

  {

  vo.setMaxFetchSize (0);

  }

  String status = "incomplete."

  OADBTransaction txn = (OADBTransaction) getOADBTransaction ();

  • oracle.jbo.domain.Date currentDate = txn.getCurrentUserDate ();

  Line = vo.createRow ();

  row.setAttribute ("TrxStatus", status);

  1. row.setAttribute ("TrxDate", currentDate);

  vo.insertRow (row);

  row.setNewRowState (Row.STATUS_INITIALIZED);

  }

  {} public void addLine (String pTrxHeeaderId)

  OAViewObject vo = (OAViewObject) this.getXXSiteTrxVL1 () .getDestination ();

  VO. Last();

  VO. Next();

  Line = vo.createRow ();

  int linNum = vo.getFetchedRowCount () + 1;

  row.setAttribute ("TrxHeaderId", pTrxHeeaderId);

  row.setAttribute ("LineNum", String.valueOf (linNum));

  row.setAttribute ("SelectLineFlag", "Y");

  vo.insertRow (row);

  row.setNewRowState (Row.STATUS_INITIALIZED);

  }

  Public Sub getTrxLot()

  {

  LinVo OAViewObject = (OAViewObject) this.getXXSiteTrxVL1 () .getDestination ();

  Line linRow = linVo.getFirstFilteredRow ("SelectLineFlag", "Y");

  String pTrxLineId = linRow.getAttribute("TrxLineId").toString ();

  linVo.setCurrentRow (linRow);

  OAViewObject vo = (OAViewObject) this.getXXSiteLineLotsVL1 () .getDestination ();

  }

  Public Sub addTrxLot()

  {

  LinVo OAViewObject = (OAViewObject) this.getXXSiteTrxVL1 () .getDestination ();

  Line linRow = linVo.getFirstFilteredRow ("SelectLineFlag", "Y");

  String pTrxLineId = linRow.getAttribute("TrxLineId").toString ();

  linVo.setCurrentRow (linRow);

  OAViewObject vo = (OAViewObject) this.getXXSiteLineLotsVL1 () .getDestination ();

  VO. Last();

  VO. Next();

  Line = vo.createRow ();

  row.setAttribute ("TrxLineId", pTrxLineId);

  row.setAttribute ("RowKey", new oracle.jbo.domain.Number (1));

  vo.insertRow (row);

  row.setNewRowState (Row.STATUS_INITIALIZED);

  }