Problem with ATG OOTB reports using OBIEE 11 g

Similar Questions

• Problem with Top SQLs report

  Hello

  I have a big problem with Top SQLs reports, when I generate a report of high SQLs, SQL, the value text is not end, I know that there is a "The SQL text size" setting on the properties of the agent (this configuration is also on the collections setting ' Ta maximum size in characters of the short collects text of the SQL statement is ") on the two options , I've incremented the value of 256 (default) 1500, but when I generate the Top SQLs postpones continue it problem, once the changes I restarted the agent but the problem persists, I generate the report on the different formats, but result is the same, could you help me please.

  Thank you.

  Best regards.

  I see this in support KB article https://support.software.dell.com/kb/109536

  "

  • Title

    SQL in DB2 Top instructions are truncated in the delivered report of Top SQL

  • Description

    SQL in DB2 Top instructions are truncated in the delivered report of Top SQL

  • Resolution

  • Resolution A DDB-3673 request improvement with Support software Dell to show the full text of SQL high in the report Top SQL for DB2.

    Workaround At this point you should be able to make a custom report by cloning the Top SQL existing and then customizing report. »

  I know that this is not the solution, more of an explanation and guidance on how to solve this problem by using customizations.

  Golan

• I had a problem with slow, so I used "reset". The popup ran forever so I stopped it. Now I can not remove or add the program.

  I had a problem with slow, so I used "reset". The popup ran forever so I stopped it. Now I can not use, remove or add the program. How should I proceed?

  TIA,
  BWSwede

  Try to create a new profile.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile

  What problems do you have that you want to reset Firefox?

  Firefox creates a new folder of old data of Firefox on the desktop?

  If reset you Firefox and a new profile is created and some of your data (bookmarks, passwords, cookies, form data) is automatically imported and your current profile will be moved on the desktop (old data of Firefox).

• Problem with pole-zero analysis using multisim

  Problem with pole-zero analysis using multisim

  Party a pole / zero analysis is linearizing circuit using an operational RODC analysis, in which a driver acts as a short circuit. The problem is that in your circuit, the inductor in parallel with a source of internal tension unit.

  Use a small resistor (1mOhm will do in your case) in series with the generator output functions to break the loop short-circuit.

• Upgrade Vista to 7 the SafeMode problem with the compatibility report

  I'm trying to upgrade my computer to Windows 7 after problems with Vista, and now I can start only my computer into safe mode now.

  The update disc work until I get to the "compatibility report" in which it gives me the message: "the computer started using the Windows installation disc.  Remove the installation disc and restart your computer so that windows starts normally, then restart the update."

  This message appears in safe mode with networking, which was started without the installation disc inserted.  I then restarted and booted from the DVD and tried to update again, and he gave me the same message (which makes sense because I boot from the disk).

  This message occurs when I start in safe mode or safe mode with network.

  Is there anyway to solve this problem, so I can go ahead with the update?  Also, I can't start my computer in normal mode to respect the indications that gives me this message.

  Hello
  You can't go in safe mode

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu () type msconfig and press enter on your keyboard - follow UAC prompt.
  4. The System Configuration utility opens
  5. Make sure the Normal startup is selected
  6. then click on the STARTUP tab at the top
  7. Make sure that the startup is disabled
  8. Apply - OK - then follow restart guests

  If it does not do a startup repair

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  Windows 7 installation issues and ask in the forums of windows 7

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

• Problems with Windows Error Reporting

  I have Vista Home Prmium with SP2 on a dual processor computer heart. wermgr.exe is running in the background and when he does he can linger around for awhile while using 50% of my CPU all the time. He passes in and out the Task Manager, so that the CPU usage is constantly bounce up and down. I tried to disable the windows error reporting service, but it does not work. I read it could be a problem with 2007, but Office and this race Diagnostics would take care of the problem... but the diagnosis has not found a problem. Does anyone have an idea what I can do to fix this? Or y at - it a way to really disable the error reporting service?

  Thank you

  Here's how to disable Windows error reporting in Vista: http://www.howtogeek.com/howto/7863/disable-error-reporting-in-xp-vista-and-windows-7/; However, it is not recommended because it can be a useful tool if you are having problems.  That "s your decision to make.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• What is the problem with my Oracle reports parameter?

  Hello

  We use a PL SQL package that allows the user to select the report you want Oracle and associated parameters.   While the control is passed to Oracle 11 g reports.

  The requirement of one of the reports is to enable more detailed codes be selected by the user and then shown.  The detailed code is an alphanumeric field that can hold between 4 and 6 characters.

  If my data model looks like this

  SELECT student_id

      FROM my_view

     WHERE detail_code IN :p_detail_code;

  and the parameter that I'm passing to Oracle reports looks like this (when I view the source HTML code)

  & p_detail_code =('1001','1002')

  so no record is selected.

  However, if my data model looks like this, I get the records you want:

  SELECT student_id

    FROM my_view

  WHERE detail_code IN ('1001', '1002');

  We have Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production.

  Please tell me what is the problem with my setting.  Thanks a lot for your help.

  This isn't how you can use in. See this example on how to solve it with the digital settings. If your setting is a character, you need to change this.

  In fact, when you simply enter 1,2,3 as an input parameter, you actually create this query:

  Select *.

  from my_table

  where num_column in ("1,2,3")

  Use rather a lexical parameter:

  Select *.

  from my_table

  & p_where

  In the parameter after relaxation shape, build the lexical like this:

  :p_where := 'where num_column in ('||:p_param||')';
  

• Problems with downloading the reports BI to Excel in Office 2007

  Hello
  I created reports using the plugin BI Publisher for Word 2007 and deployed through the Apex. Users with Office 2003 is installed get download the file without any compatibility issues. These users on Office 2007 get a warning as follows:
  
  'The file you are trying to open.' filename.xls, is in a different format than specified by the file extension. Check that the file is not corrupted and precedes from a trusted source before you open the file. Do you want to open it now? "
  
  The file will open and save, it's all just annoying to get this message every time. There are no problems when downloading the report to other formats.

  It is a known problem... It is a "Fix" of Microsoft, to ensure that people know that the file is NOT a style true Blue XLS file... My office just to go through it and it is adjustable, but involves a registry setting that they do NOT HAVE want to impliment...

  Please see the attached url:

  http://Stephen.paytonplace.us/archives/74

  Thank you

  Tony Miller
  Webster, TX

• Re: Problems with Microphone when I use Skype

  Could anyone help with the problems I am experiencing with the microphone when using Skype?
  I also tried to use an external, but still problems with the other person can't hear me, y at - it a setting I can adjust its been to Toshiba and they said that there is no fault.

  Any help would be appreciated.

  In fact internal mic works well with Skype.
  All you need to do is enter the sound options of Skype and check the settings there especially if you use the headset.
  Play around with these settings.

• Problem with external monitor when used with the Satellite P100-434

  I'm trying to use a Vizitron L - 151 monitor flat screen connected to the VGA port on the back of my Satellite P100 - 434 (PSPADE)

  I find that the screens seem to periodically - feeding cycle windows resize themselves and then the screens settle down again. This happens with the laptop and the external monitor.

  I've updated the latest available BIOS V4.20 (November 2, 2007) I use 7.15.11.6369 NVIDIA GeForce Go 7600 driver version. I'm under the edition of Vista Home Premium to standard build.

  I even resorted to the use of the dvd system recovery to rebuild completely the laptop and the problem persists. In Device Manager I have generic Non - PnP monitor and below that I have a generic PnP monitor I tried and it is not possible to get specific drivers for the monitor Vizitron L-151. * NOTE * I saw dxdiag that the external display is identified the Non - PnP device

  The display configuration that I'm trying to use is to have my laptop as the main screen with the external display on my left as an extension to the desktop. In display config my computer screen appears as number 2 with the additional display in the poster as a device 1

  While typing this my screens have made this three times and the last time, this IE7 window installs itself to the external display in restored down to size.

  If anyone has a glimpse of it, I would be very grateful. There are no problems when the external display is deleted.

  _I can reproduce this problem on demand_ by uninstalling the monitor Non - PnP Device Manager.

  Sorry, mate, but you ad confuses me a little and be hones I m not 100% sure what you take on
  You have some problems with the resolution of the external display or what?

  I've found another thread on the setting of the external screen as main screen:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=96263#96263

  According to this statement:
  > In display config my computer screen appears as number 2 with the additional display in the poster as a device 1
  It seems that the external monitor has been on the main screen and display books internal as external.

  I recommend you change this settings and to use books appear as 1 and the external display form 2.

• Laptop G60-549DX (with OS Windows7-problem with the microphone when using Skype)

  Just bought a laptop G-60-549DX. His mic is BAD. Voice of cuts to when using Skype. Help!

  I was able to solve the problem with the microphone on the G60-549DX when using Skype.  I spend up to 6-8 hours, talk with convenience stores of HP.  They were very friendly and helpful.  The same help a friend.  My friend downloaded updated bios and micro drivers.  HP technician asked me to turn off the laptop, then remove the battery, unplug the power cord. With battery removed and stop, I pressed the market / off power button for a good minute evacuate remaining power into the computer. When I restarted the laptop I micro worked. I did a little more fine-tuning of the installation of the microphone.  Now, it works well on Skype and sound recorder. I won't take this back within the 14 days return policy.  It's a good computer I can say.  The technicians were all very friendly and helpful.  They called me several times to check to see if it still works OK! They are HUGE!  They want to help with any other question, I have perhaps with the computer.  Thank you very much for the help. Everyone was SO helpful.

• HP Photosmart 6520 and problems with the air IPAD using IOS 8.0.2

  Used APPLE IOS 7. No problem with printing to the 6520. Now, I've updated to version 8.0.2. now, to get a message on the IPAD, saying: 'no printer not found '. No printing from laptop to printer and no problem shows on laptop as the printer selected in the folder devices and printers. Y at - it an update of software of HP to run version 8.0.2. .

  JERENDS, thanks for your response. I had already tried the "hard restart" at the suggestion of the Apple Tech Help, but that doesn't seem to help. But late last night after posting my question Imtried print again and IPAD are my printer without problem. Why he couldn't find yesterday morning but has been able to find it later in the day is one of the mysteries of life, I guess.

• Problem with lines in Illustrator using the Wacom Tablet

  Hi all

  I have no idea why I'm having this problem in Illustrator. I use the small Intuos Pen Tablet (CTL-480), and my lines in illustrator is really strange. Even when I turn off the pressure in the brush settings, there is a gap in the line (it takes just one line of the same thickness). The Tablet works perfectly in Photoshop, but because I use the tablet to create art using plates (typography), it is easier and better for me to use illustrator. You are not sure that someone else had a similar problem or know maybe a setting I could change or try to fix it?

  I have attached a picture of the problem.

  

  

  Thank you for your help.

  This is a known issue.

  If all you want is a line single width, do not use brushes. Use the pencil tool and a simple blow

  If you apply a calligraphy brush, apply the effect zig - zag to it with a value of 0, then a setting of about 100 (turn on the preview to adjust)

• Seeking help with a problem with the LR I use LR CC on a laptop, when you try to export a picture to an external hard drive, I am now without apparent reason to get the following message, "could not create a JPEG sponsor limit you 92 k Bytes.Plea.

  Seeking help with a problem with the LR

  
  

  I use LR CC on a laptop, when you try to export a picture to an external hard drive, I am now without apparent reason to get the following message.

  "Could not create a respondent JPEG limit you 92 k Bytes.Please increase the size limit files
  . (1).
  .....

  I tried to increase the size of the file several times,

  I left LR

  I restarted the computer.

  
  

  Any help or advice for this problem will be greatly appreciated

  
  

  Thanks in advance

  
  

  @stu

  Not because of the number of pixels, in this photo and the chosen level of quality there is no possible way to create a JPG file to the size of file you requested. You must change your export settings.

  Show us a copy of the export dialog box, so we can see clearly the part file setting and the size of the Image.

  Also indicate the number of this image (width and height) pixels after cropping (as appropriate) and prior to export.

• Problem with the compilation by using the new compiler (Compilation failed during execution: compilation-abc)

  Hello

  Since the release of the fast compiler, I experienced problems with the compilation of the version release with it.

  As it was still in beta, and since it was still possible to use the legacy compiler, I chose to use the legacy compiler each time (especially since it was more stable).

  With this 64-bit iOS requirement came into play on February 1, the legacy compiler is no longer available because it has been completely removed from AIR 16 (and all future versions).

  Now, I can no longer compile release versions (debug versions are works well) because I have the following error every time:

  Error occurred during the application of packaging:

  Stack dump:

  0 program arguments: C:\Program Files\Adobe\Adobe Flash Builder 4.7 (64 Bit)\eclipse\plugins\com.adobe.flash.compiler_4.7.0.349722\AIRSDK\lib\aot/bin/compile-abc / compile - abc.exe - mtriple = armv7-apple-ios - filetype = obj - sdk C:\Program Files\Adobe\Adobe Flash Builder 4.7 (Bit)\eclipse\plugins\com.adobe.flash.compiler_4.7.0.349722\AIRSDK\lib\aot/lib/avmglue.abc 64-fields C:\Program Files\Adobe\Adobe Flash Builder 4.7 (64 Bit)\eclipse\plugins\com.adobe.flash.compiler_4.7.0.349722\AIRSDK\lib\aot/lib/air-fields.)) arm-air.txt-O3-ane-symbol = MmgCmApiExtInitializer - ane-symbol = MmgCmApiExtFinalizer - ane-symbol = MmgRbApiExtInitializer - ane-symbol = MmgRbApiExtFinalizer - ane-symbol = MmgStoreKitApiExtInitializer-ane symbol = MmgStoreKitApiExtFinalizer-ane symbol = MmgGoViralApiExtInitializer-ane symbol = MmgGoViralApiExtFinalizer-ane symbol = MmgGaApiExtInitializer - ane-symbol = MmgGaApiExtFinalizer - ane-symbol = MmgGAIDFAAccessApiExtInitializer - ane-symbol = MmgGAIDFAAccessApiExtFinalizer - ane-symbol = AFExtensionInitializer - ane-symbol = PushwooshExtInitializer - ane-symbol = PushwooshExtFinalizer elease-temp\AOT\AOTBuildOutput4982262150932522887.tmp\ABCFilesList.txt-abc-file-list=C:\BingoIslandWeb\Client-branch-1.06.05\BingoIslanMobile\BingoIsland\bin-r

  Compilation failed during execution: compilation-abc

  
  

  I tried to pin-point the source of the problem leaving specific things in the code, while removing all the rest,

  But so far, all I could find is that he has a problem with the classes that extend EventDispatcher.

  Anyone encounter this problem and knows how to work around it?

  Thank you!

  
  

  
  

  I had this problem also with other things. It was difficult to solve. Remove all const and var conversion in the Document class solve my problems