Problem with BB JDE v4.6.0 signature code

Similar Questions

• Problems with updating creative cloud to desktop. (error code: 2)

  Problems with updating creative cloud to desktop. (error code: 2)

  Hi Mike,.

  You can follow the article: error: "unable to install". Creative Cloud Desktop that will help you get your number sets.

  Alternatively, you can follow the thread: Creative Cloud desktop could not be updated. () Error code: 2) where this issue is already addressed.

  Let us know if it works or not.

  Thank you

  Yann Arora

• Problem with DVD player and get the error code 19 Device Manager

  Original title: TSSTcorp CDDVDW SH - 224DB ATA device

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  How to fix it please Message Please please how to fix it

  Hi Emerald,

  Please contact Microsoft Community. I understand that you have a problem with the CD\DVD drive and get the error code 19 Device Manager. I've surely you will help solve this problem.

  To better understand the issue, I would like to know if you have any recent software or hardware on the computer changes before this problem?

  This problem might have occurred because of these reasons:

  1. Install or uninstall the CD or DVD recording programs.
  2. Uninstall Microsoft Digital Image.

  Try the steps listed here and see if it helps:

  I suggest you try the procedure described in article which will correct corrupted registry entries. Check if it helps.

  Your CD-ROM or DVD drive is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060/en-us

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Problems with the windows troubleshooting utility. Error code: 0 x 80070002

  Original title:

  Problems with the windows troubleshooting tool

  Whenever I run the Troubleshooting Guide for things like a problem of wireless network I get this error

  An error occurred during troubleshooting:
  An unexpected error has occurred. The Troubleshooting Wizard can not continue.
  Identifier of the package: PeformanceDiagnostic
  Path: No Local package
  Error code: 0 x 80070002
  Source: engine
  User: SCOTTSLAPTOP\Scott
  Background: high

  Hello

  1. the problem occurs with all the troubleshooters you trying to run?
  2. why you try to run the troubleshooter?

  3. Since when are you facing this problem?

  Note:
  You can back up data to an external hard drive and no CD. It is essential to back up data even if you do an inplace upgrade.

  You can try to do an inplace upgrade and check if this gives a probable solution.
  Check the following link to see how to perform an inplace upgrade.
  http://support.Microsoft.com/kb/2255099

  I hope this helps.

• Problem with the JDE Plugin

  Eclipse 3.5.0 and BB Java SDK 5.0.0.14 using... I'm just getting started with BlackBerry... I just built and tested the HelloWorld app... launched in the Simulator end. I try then run it on my camera, to get an error on the wrong version. So, I try and run it again in the Simulator, and now the app just does not appear in the downloads folder. Just nothing. Any ideas what's happening here?

  This happened to me earlier today by using the JDE, so I switched to the Eclipse thinking that would take care of her...

  Never, does anyone else have this problem?

  OK, I fixed it. I just deleted the project BB and recreated and it seems to work again. I think that the problem can me been accidentally right click on the project name and selecting 'BlackBerry\Package project (s).

  What the devil who does anyway?

• Problem with the conversion of Midlet (jad/jar) cod file (Jasymca 2.0)

  BB Storm last official OS.

  There is this wonderful program called Jasymca 2.0 which is a combination of programs of mathematics MATLAB and MAXIMA of high-end (subset to fit) and written in J2ME as a MOPED. To see a demo of it, go to http://webuser.fh-furtwangen.de/~dersch/jasymca2/indexEN.html and click on demo on the left. It's quite impressive... able to make the symbolic math and math matrix among others. The ultimate calculator for a PDA... and the best I could find out there.

  The only problem is that it is written in J2ME as a MIDLET and the runtime is stored as a combination of jad/jar. Now, I tried the standard conversion using the CAP as follows...

  CAP import = "C:\Program Research In Motion\BlackBerry JDE 4.7.0\lib\net_rim_api.jar" code name is jasymca-midlet jad is Jasymca.jad Jasymca.jar

  It seems to work very well. There are a few warnings about unused variables, but that's fine. The last line was "No Errors".

  .. .and he left me with a file .cod 229K

  When I insert it in my blackberry through javaloader, it loads very well.

  However, when I look in my download directory I 2 files related to Jasymca and not running.

  I suspect that it is because the cod file is too big. Is there another step I can do for the cod of the loadable file?

  Any help is appreciated.

  Thank you

  -Donald

  It takes more time than I expected.

  There is a preprocessor directives in the source files and to leave JDE to understand these guidelines, I need to modify the jdp.

  I stopped the investigation

  But I will say that I found.

  icons and data files must be located in the default folder.

  If the root folder of the package is src\

  path of the icon should be: src\myicon.png

  for now the icons are located in the src\icons folder

  in this case the image files are not accessible from the BlackBerry App.

  The second: there are some files showed up as the symbol file name first.

  JDE does not add these files to the project.

  I think that the best way would be to contact the developer of Jasymca and talking to him about the Jasymca and porting for BlackBerry

• Problems with Microsoft Tun Miniport Adapter #2 error (code 10)

  The difficulty to stay connected to internet connected then disconnected tried to download the new driver still having problem cant hook up directly to the modem. Don't know much about computers. Under the Advanced tab under ownership of what he says in virtue in white value network address. Is there something that belongs to it? And if so what happens at the end I put there. Under the general tab where it says place: unknown that is what belongs to it? I disabled it for now. Now I get the error code 22. He drives me to drink with all the problems I had. It's my laptop frist, it's one and a half years. What should I do? Help, please! Thank you. P.S. I am running VISTA HOME PREMIUM SERVICE PACK 2.

  OJ1007,
  Thank you for visiting the Microsoft Answers community forum.

  Disable IPv6:
  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack.  To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.»  Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

  NOTE: You should do this for each network connection.

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:
  http://support.Microsoft.com/kb/299357

  Let us know if this does not solve your problem.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with windows install, Skype instalation was failure, code 1601

  I tried to install Skype, but there was a message: "it was not possible to access Windows Installer, check with technical support if the installer of Windows" and nothing else. I don't know what to do, can you help me with this? He also write "Skype instalation was failure, code 1601" I checked also some other posts on Skype instalation problems, but it was not really useful for me, because I did not fully understand them.

  Hello Samuel,.

  Thank you for the update.

  1. What are updates?
  2. Have you tried to install these updates? If so, you receive error message?

  Try to install these updates one by one and check if they install.

  If you receive an error message, please let us know the error message full/code so that we can further research and help you.

  Thank you.

• Problem with microphone on iOS - bug or bad code?

  Hi all

  It seems that the use of the micro class freezes my Flex app. I provided the code below, but here is an overview:

  • This only happens on iOS - specifically my iPhone 4. I have not seen this problem on Android devices.
  • My code alternated recording and records don't not - 5 seconds to one, then 5 seconds of each other, then repeat over and over again.
  • I have reduced this to a 'minimum' example (see code below) which does this. It does not use data etc. coming the Microphone is not create or fill a ByteArray.
  • The application always crashes. In some cases, this happens when he worked only 2-3 minutes, in all cases, it happens in half an hour. I did 10 sets of tests and the average is 15 minutes.

  My application is a language learning app and recording and playback of the voice of the user is an important feature. It allows the user to hear how their pronunciation matches that of a native speaker. When recording / reading is marketed the software repeatedly plays a few sound recordings, the voice of the user, it reads, the more audio plays, etc.. In other words, it includes features similar to the minimal case code I included here. Users often use this feature 30 minutes or more. It is therefore a problem.

  I'm doing something wrong in my code? Just checking before I report it as a bug.

  You can download an FXP from here if you are interested:

  http://www.Brightworks.com/downloads/RecordingTest.FXP

  Alternatively, the important code is below. This is the display (only) of the sample application.

  Thank you

  Douglas

  Douglas McCarroll

  Brightworks, Inc.

  320.300.0220

  <? XML version = "1.0" encoding = "utf - 8"? >

  < s:View xmlns:fx = " " http://ns.Adobe.com/MXML/2009 "

  xmlns:s = "library://ns.adobe.com/flex/spark".

  creationComplete = "onCreationComplete().

  title = "Test recording" >

  < fx:Declarations >

  < / fx:Declarations >

  < fx:Script >

  <! [CDATA]

  private var _isRecording:Boolean;

  private var _iterationCount:uint = 0;

  private var _microphone:Microphone;

  private var _recordedSeconds:uint = 0;

  private var _timer:Timer;

  private function onCreationComplete (): void

  {

  NativeApplication.nativeApplication.systemIdleMode = SystemIdleMode.KEEP_AWAKE;

  }

  private void doNextPhase(event:TimerEvent_=_null):void

  {

  _isRecording =! _isRecording;

  If (_isRecording)

  {

  _iterationCount ++;

  displayOutput ("Recording");

  _microphone = Microphone.getMicrophone ();

  _microphone.rate = 44;

  _microphone.gain = 50;

  _microphone.setSilenceLevel (0, 2000);

  _microphone.addEventListener (SampleDataEvent.SAMPLE_DATA, onNewRecordingSampleData);

  }

  on the other

  {

  _recordedSeconds += 5;

  displayOutput ("Pausing");

  _microphone. RemoveEventListener (SampleDataEvent.SAMPLE_DATA, onNewRecordingSampleData);

  _microphone = null;

  }

  }

  private void onNewRecordingSampleData(event:SampleDataEvent):void

  {

  }

  private void displayOutput(phase:String):void

  {

  var freeMemoryMB:int = Math.round (System.freeMemory / (1024 * 1024));

  var privateMemoryMB:int = Math.round (System.privateMemory / (1024 * 1024));

  var totalMemoryNumberMB:int = Math.round (System.totalMemoryNumber / (1024 * 1024));

  phaseLabel.text = "Phase:"+ phase; "

  iterationLabel.text = "iteration:"+ _iterationCount; "

  recordedSecondsLabel.text = ' seconds saved: "+ _recordedSeconds;"

  freeMemoryLabel.text = "System.freeMemory MB:"+ freeMemoryMB; "

  privateMemoryLabel.text = "System.privateMemory MB:"+ privateMemoryMB; "

  totalMemoryNumberLabel.text = "System.totalMemoryNumber MB:"+ totalMemoryNumberMB; "

  }

  private function startTimer (): void

  {

  _Timer = new Timer (5000, 0);

  _Timer.addEventListener (TimerEvent.TIMER, doNextPhase);

  _Timer.start ();

  }

  private function onStartRecordingButtonClick (): void

  {

  If ((Microphone.getMicrophone ()))

  {

  startRecordingButton.enabled = false;

  startTimer();

  doNextPhase();

  }

  on the other

  {

  phaseLabel.text = 'No Mic' available;

  }

  }

  []] >

  < / fx:Script >

  < s:VGroup height = "100%".

  Width = '100% '.

  paddingBottom = "20".

  paddingLeft = "20".

  paddingRight = "20".

  paddingTop = "20" >

  < s:Label id = "phaseLabel".

  Width = "100%" / >

  < s:Label id = "iterationLabel".

  Width = "100%" / >

  < s:Label id = "recordedSecondsLabel".

  Width = "100%" / >

  < s:Label id = "freeMemoryLabel".

  Width = "100%" / >

  < s:Label id = "privateMemoryLabel".

  Width = "100%" / >

  < s:Label id = "totalMemoryNumberLabel".

  Width = "100%" / >

  < / s:VGroup >

  < s:HGroup width = '100% '.

  horizontalAlign = "center".

  Low = "10" >

  < s:Button id = "startRecordingButton".

  label = "Start Recording"

  a click = "onStartRecordingButtonClick()".

  Width = "60%" / >

  < / s:HGroup >

  < / s:View >

  The problem has been resolved with 3.8.0.730!

  http://forums.adobe.com/message/5399512#5399512 ;-)

  Thank you Adobe!

• Problem with the task of control of model code - execution instance remains open

  Hi Experts
  
  We have some model mappings, for which we use some similar code with the model code BUILT_IN_CT model. Mappings to run successfully, but the task of control of model code seems to remain open. It's the same thing, even if I use the code model of control by default BUILT_IN_CT/CCT_ORACLE.
  
  To see if the control task remains open, I run the script...\dbhome\owb\rtp\sql\list_requests.sql, and I get the following output:
  
  ====================
  EXECUTIONS
  ====================
  ID of the audit. State of... Name... Date of... Owner...
  16_FLOW_CONTROL LOAN 260573 19 APRIL 11 10:15:16 OWBSYS
  
  As a solution to the problem, we managed to implement a custom task jdbc, in which we are to pick up instances of this task and then close them using the owbsys.wb_rt_script_util.deactivate_execution procedure.
  
  Anyone know the reason for this problem and if there is a solution for it, other then to implement a custom task to close the open instances?
  
  We use OWB 11 GR 2 on Windows.
  
  THX
  Your help will be much appreciated

  Yes, I see now the verification element hanging out in OWB, this looks like a bug in the OWB audit management, it should not be suspended. I don't think impact on behavior, he is a piece of dangling audit data that should not exist. You can raise a bug/SR?

  See you soon
  David

• Problem with Audio and cannot restore. Error code 0 x 80070002.

  Have a Gateway FX 6860 under Windows 7 Home Premium.  Audio worked fine in the morning but in the afternoon (no updates being installed), I noticed that the sound speaker in the start bar had a red X.  Thought I had cut the sound, but the button mute on the keyboard had no effect (any more than the volume upward or down keys).  Roll the mouse on the icon gives "no speakers or headphones are connected.  Tried researching this issue after trying to restore the system (System Restore did not complete with each available computer restore point was [gave me every time the error code 80070002 x 0]).  I tried to uninstall and reinstall the device driver (no effect), I tried my repair disc (nothing), run a sfc/scannow (results indicate that there is no corrupted files).  I have connected my ipad for output wire to test the speakers (integrated in HP 2009 monitor) to check the wiring and speakers (they worked).  I ran the antivirus (AVASTI) software with no results.  Before that I have to empty everything and recover the system; is there anything else I could try?  Don't want to go through the entire re - install everything systematics for something simple.  What I forget?

  Hello

  Thank you for the update.

  You can try to install the drivers from the link below and see if that helps.

  Driver downloads &

  http://us.gateway.com/GW/en/us/content/drivers-downloads

  If this does not help then, try to perform the disk check and see if that helps. Run the disk check to find and fix errors on the disc.

  (a) click Start, type cmd, right-click cmd, and then click on run as administrator.

  (b) at the prompt, type chkdsk /f /r and press to enter.

  (c) try to do restore and check the result.

  For more information on 'Check a drive for errors' please visit this link:

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk be lost.

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• Windows has detected a problem with NVIDIA GeForce 8800 M GTS. Code 43

  I was playing a computer game, when suddenly the game crashed. I restarted my computer to see that I can not play because my computer disabled my NVIDIA, saying only he reported code 43 problems.

  someone please help?

  Try to start in safe mode and selecting «last good...» »

  And since you have a portable computer have you updated the drivers (chipset & graphics) of your computer support site mobile phone manufacturers?

• I have a problem with & Microsoft Windows updates. The error codes are 0x8024a000 and 8024a 000 Windowsupdate. I have not received a Windows or Microsoft Update for February 2013.

  I ran the troubleshooting and it fixed 2 problems but when I check the updates I always get this error message.

  Colleen,

  Click Start

  Type: cmd

  Right-click on cmd in the start menu and select "Run as Administrator"

  Type: net stop wuauserv

  Press enter

  Type: ren c:\windows\SoftwareDistribution softwaredistribution.old

  Press enter

  Type: net start wuauserv

  Press enter

  Type: exit

  Press enter

  Reset

  Try to download updates

  `~`

  The current time and the date now in Baja California, Mexico

  09:23
  Tuesday, June 4, 2013
  DST - 0700 UTC
   
  UTC/GMT is 16:23 Tuesday, June 4, 2013
              
  Current weather conditions in San Felipe

  Claire81 ° F / 27 ° C

• problem with printhead - it's on my Officejet Pro 6830

  All I seem to get on the printer is the message above - problem with printhead and underneath there is a code 0xc19a0042.

  Could someone tell me how to get this printer working again I tried to turn off, remove the ink cartridges, looking for all the obstructions, switch on fowarding impression and the same message appears.

  Any help would be greatly appreicated, Oh and also when I took the printer out of the box that it came in a small plastic Cog is out, it may have something to do with it, but it has been printing fine since I got it a month ago.

  Hi people, just check you received a replacement of HP support printer?

  Thank you

  Ciara

  Note for someone else on this thread, please see the links below for support Docs

  Americas and Asia

  http://support.HP.com/us-en/document/c04839288

  Europe, Middle East, Africa

  http://support.HP.com/us-en/document/c04839289

• Problem with the State showed up in BB10

  Hello

  After the upgrade of my DevAlpha to the latest version, 10.0.9.1675, I have problems with 2-State buttons.

  Example code:

  #myBtn{
      background-image: url(btn/myBtn.png);
      background-repeat: no-repeat;
      background-position: 0px 0px;
  }
  #myBtn:hover{
      background-position: 0px -124px;
  }
  

  So, when I click the button it stay frozen until steady-state, does not return to the default position. All my apps of ww are affected by this problem.

  Anyone can attempt to reproduce this problem?

  If so, what is the solution?

  This is sort of the standard: hover behaviour I noticed in mobile browsers. Since then no cursor, hover is only simulated.

  The simplest solution (and the one I use in my projects) is to use: active instead of: hover.

  #myBtn:active{
      background-position: 0px -124px;
  }