Problems with Microsoft Tun Miniport Adapter #2 error (code 10)

Similar Questions

• #2 Microsoft Tun Miniport Adapter? Error code 10

  Hello guys! I couldn't connect to internet from my desktop computer. I found this error message for the Microsoft Tun Miniport «»

  Adapter 2 # "describing that the driver could not start. (Error code 10)

  I tried uninstalling the driver and then update but failed...

  I have a Windows Vista 32 bit and the model is SR5703WM

  Any help would be really appreciated :D

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems

  If the steps above fail I would say that you uninstall the network card and later visit the network adapter manufacturer's Web site and download and install the latest drivers for it and check that it works.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Or Gloria solution try found here

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/trouble-with-Microsoft-Tun-miniport-adapter-2/6d6698df-2b0d-4963-91b3-6f7d86044d64

• I have a problem with & Microsoft Windows updates. The error codes are 0x8024a000 and 8024a 000 Windowsupdate. I have not received a Windows or Microsoft Update for February 2013.

  I ran the troubleshooting and it fixed 2 problems but when I check the updates I always get this error message.

  Colleen,

  Click Start

  Type: cmd

  Right-click on cmd in the start menu and select "Run as Administrator"

  Type: net stop wuauserv

  Press enter

  Type: ren c:\windows\SoftwareDistribution softwaredistribution.old

  Press enter

  Type: net start wuauserv

  Press enter

  Type: exit

  Press enter

  Reset

  Try to download updates

  `~`

  The current time and the date now in Baja California, Mexico

  09:23
  Tuesday, June 4, 2013
  DST - 0700 UTC
   
  UTC/GMT is 16:23 Tuesday, June 4, 2013
              
  Current weather conditions in San Felipe

  Claire81 ° F / 27 ° C

• I have a problem with the #2 Microsoft tun miniport adapter. It cannot start. FileVersion pilot because it is 6.0.6001.18000

  Hello! I have a problem with the #2 Microsoft tun miniport adapter. It cannot start. FileVersion pilot because it is 6.0.6001.18000 (longhorn_rtm 080118-1840). I have a problem because my internet is not working because of the adapter, so I'm not able to use your forum solutions requesting that my internet is working. So, can you give me some advice on how to deal with this problem.

  Hello

  Refer to the answer posted by Sabrina Shen in the following link to resolve the problem:

  Map #2 Microsoft Tun Miniport

  See also:

  The problems of Internet connection

  Network connection problems

  Why I can't online?

  Windows wireless and wired network connection problems

• Problems with updating creative cloud to desktop. (error code: 2)

  Problems with updating creative cloud to desktop. (error code: 2)

  Hi Mike,.

  You can follow the article: error: "unable to install". Creative Cloud Desktop that will help you get your number sets.

  Alternatively, you can follow the thread: Creative Cloud desktop could not be updated. () Error code: 2) where this issue is already addressed.

  Let us know if it works or not.

  Thank you

  Yann Arora

• ASUS K52F/K62F computer laptop w/Windows 7 Home Premium, Service Pack 1 Microsoft Terendo Tunneling adapter 10 error code

  I have an ASUS K52F/K62F computer laptop w/Windows 7 Home Premium, Service Pack1.  The icon of my laptop shows an indication for an error/problem.  The error is "Microsoft Terendo Tunneling adapter, error 10 code, the device cannot start.

  I went in the Manager device and uninstalled this 'network card' and then tried to reinstall, however, had no chance.  Read the suggestions of various forums and various download sites, but have had no success.  Any suggestions? where to find the referenced so adapter disc I can download?  Uninstall and reinstall windows 7? update to windows 7?  Download windows 10?  My wife has a laptop ASUS with Windows 8 and she recently downloaded windows 10 which now works, but takes it little time to get used Windows 10.

  I've been on his computer w/Windows 10 laptop and I still prefer Windows 7.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are getting an error code.

  I suggest you to refer to the suggestions by Jatin Pradhan replied on 17 October 2014 and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Microsoft-Teredo-tunneling-adapter-has-a-driver/817bb398-5289-4B8A-A747-5c29d388dcf5

  You can also check:

  https://support.Microsoft.com/en-us/KB/943104

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Problem with DVD player and get the error code 19 Device Manager

  Original title: TSSTcorp CDDVDW SH - 224DB ATA device

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  How to fix it please Message Please please how to fix it

  Hi Emerald,

  Please contact Microsoft Community. I understand that you have a problem with the CD\DVD drive and get the error code 19 Device Manager. I've surely you will help solve this problem.

  To better understand the issue, I would like to know if you have any recent software or hardware on the computer changes before this problem?

  This problem might have occurred because of these reasons:

  1. Install or uninstall the CD or DVD recording programs.
  2. Uninstall Microsoft Digital Image.

  Try the steps listed here and see if it helps:

  I suggest you try the procedure described in article which will correct corrupted registry entries. Check if it helps.

  Your CD-ROM or DVD drive is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060/en-us

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Problems with the windows troubleshooting utility. Error code: 0 x 80070002

  Original title:

  Problems with the windows troubleshooting tool

  Whenever I run the Troubleshooting Guide for things like a problem of wireless network I get this error

  An error occurred during troubleshooting:
  An unexpected error has occurred. The Troubleshooting Wizard can not continue.
  Identifier of the package: PeformanceDiagnostic
  Path: No Local package
  Error code: 0 x 80070002
  Source: engine
  User: SCOTTSLAPTOP\Scott
  Background: high

  Hello

  1. the problem occurs with all the troubleshooters you trying to run?
  2. why you try to run the troubleshooter?

  3. Since when are you facing this problem?

  Note:
  You can back up data to an external hard drive and no CD. It is essential to back up data even if you do an inplace upgrade.

  You can try to do an inplace upgrade and check if this gives a probable solution.
  Check the following link to see how to perform an inplace upgrade.
  http://support.Microsoft.com/kb/2255099

  I hope this helps.

• Problem with Audio and cannot restore. Error code 0 x 80070002.

  Have a Gateway FX 6860 under Windows 7 Home Premium.  Audio worked fine in the morning but in the afternoon (no updates being installed), I noticed that the sound speaker in the start bar had a red X.  Thought I had cut the sound, but the button mute on the keyboard had no effect (any more than the volume upward or down keys).  Roll the mouse on the icon gives "no speakers or headphones are connected.  Tried researching this issue after trying to restore the system (System Restore did not complete with each available computer restore point was [gave me every time the error code 80070002 x 0]).  I tried to uninstall and reinstall the device driver (no effect), I tried my repair disc (nothing), run a sfc/scannow (results indicate that there is no corrupted files).  I have connected my ipad for output wire to test the speakers (integrated in HP 2009 monitor) to check the wiring and speakers (they worked).  I ran the antivirus (AVASTI) software with no results.  Before that I have to empty everything and recover the system; is there anything else I could try?  Don't want to go through the entire re - install everything systematics for something simple.  What I forget?

  Hello

  Thank you for the update.

  You can try to install the drivers from the link below and see if that helps.

  Driver downloads &

  http://us.gateway.com/GW/en/us/content/drivers-downloads

  If this does not help then, try to perform the disk check and see if that helps. Run the disk check to find and fix errors on the disc.

  (a) click Start, type cmd, right-click cmd, and then click on run as administrator.

  (b) at the prompt, type chkdsk /f /r and press to enter.

  (c) try to do restore and check the result.

  For more information on 'Check a drive for errors' please visit this link:

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk be lost.

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• Where are the drivers for "Microsoft Tun Miniport Adapter" (named by the System Diagnostics report), also known as "Teredo Tunneling Pseuso-Interface" (as he is called by Device Manager)?

  Microsoft Corp. has made an extremely simple task almost impossible. All MS don't research drivers, software, etc. for this show no results found. There are dozens and dozens of forums discuss many problems thereby, but not links to downloads for the drivers. Despite the many discussions that say it can't be uninstalled, they are wrong...
  After all appropriate measures in the right order without result, I did as directed and diagnosis. Archbishop of the device with the plan to reinstall later uninstalled...  Now, it is not found on my computer or on MS research.
  I have Vista Home Premium on a Compaq CQ50 Notebook, w / 160 G hd, 2 GB RAM, 1YR & 1 Mo. old.

  ALL I want is a link to download the drivers & or whatever is needed to reinstall this device in good working condition. If this is not possible, please let me know what other options I might have.
  I thank very you much for your kind consideration of this request.

  Hello danjams,

  This is no fault of Microsoft, that a driver problem to the hardware of your system. Microsoft did not make these drivers for your computer. You must visit the site Web of HP/Compaq download all the drivers/software for your make and model of system. Also never leave windows utility updated your computer's hardware. Once you have downloaded them, record them onto a cd for him come in handy should need you the in the future. Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• problems with the internet connectivity and card # 2 microsoft tun miniport

  Hi, I have problems to connect to the internet and my laptop tells me them a problem with the modem / router. However, another laptop computer connected to the modem/router even works very well. in the Device Manager was an exclamation mark beside "teredo tunneling pseudo interface 10. then it disappeared and I found myself with an error with «#2 microsoft Tun miniport map» now his party in error teredo. I still only have a local internet connection i.e. no internet. not really have a lot of knowledge when it comes to computers. any help would be really appreciated.

  Hello

  You can try the steps in the similar thread to the next with a possible fix:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Teredo-tunneling-pseudo-interface-this-device/757db042-c91e-464c-B963-c1f442fdf925?page=1

• in the Device Manager window.there is a brand of (!). Microsoft tun miniport adaptor.this device cannot start. (code 10)

  in the Device Manager window.there is a (!) brand microsoft tun miniport adaptor.this device cannot start. (code 10) hmendezlopez

  Hello

  Control Panel - Device Manager - do right click on them - UNINSTALL - REBOOT

  Nothing else to do, Windows will do the rest. And you can ignore the errors altogether if you wish
  and on some computers, it will always be there but don't cause any trouble.

  On a Windows Vista-based computer or on a Windows Server 2008, Microsoft computer
  ISATAP map appears with a yellow exclamation next to it in Device Manager and you also
  error message
  http://support.Microsoft.com/kb/932520

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• If there is a problem with Microsoft Windows 7, why should I pay Microsoft to fix?

  I called Microsoft about some problems with Windows 7.  They told me my windows is deteriorating and they would charge me $99 to fix.

  Is this true?    If there is a problem with Microsoft Windows 7, why should I pay Microsoft to fix?    My computer is only 3 years old.
   
  [Moved from comments]

  Hello

  Thank you for writing to Microsoft Communities.

  Customers who purchase full packaged products (products of consumption, the Bureau of operating systems and desktop applications) will receive 90 days of assistance free of charge by phone after this load of Microsoft for support, from product activation is the first incident.

  http://support.Microsoft.com/GP/services/en-ID

  http://www.Microsoft.com/presspass/ofnote/Nera/Nera.mspx

  Hope this information is useful.

• I get a pop-up with Win32NT - 6.1.7600.0 error code.

  I get a pop-up with Win32NT - 6.1.7600.0 error code. I'm trying to load a print driver (HP CP1525nw) from the cd. Each time, he says that there was a problem, restart and try again. Help!

  original title: Win32NT - 6.1.7600.0

  Michael

  Is your Windows 7 32-bit or 64-bit?

  If 64-bit, try to download the latest device driver for your printer from

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=4052980

• I can not install the "Security Update for Microsoft Silverlight (KB2636927) ' get the error code"656»»"

  I can not install the "Security Update for Microsoft Silverlight (KB2636927) ' get the error code"656»»"

  I would like to reinstall the version the most recent, but before to do that click on the "fixit for me" button on the bottom of the page to

  http://support.Microsoft.com/kb/2608523

  Latest version

  http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx