problem with built-in predefined text animations

Similar Questions

• trace of predefined text animation

  What I am doing wrong? I want to apply an animation of type preset text path. I type in the text, in this case the word "whatever", select it in the timeline panel and then set up the trace of predefined text animation "PIPES" and drag it on the word or the layer in the timeline panel. "PIPES" and its path will appear, however they erase the word "whatever." It wont let me change the 'PIPES' place holder text with my word and even when I press play, the word "PIPES" is just there like the compostion plays and that it does not animate along its path. Any ideas?

  Here, there is a work around:

  Animation path in Presets of AE CC2015 (Win) text bug

• Problem with an application of text analysis

  Hello

  I am a beginner in labview and I have some problems with my application.

  I have the front of my VI, an area of input text and two arrays of strings: one that contains a few words I have to say if they can be found in the text.

  And the other table contains the results of research: found or not found

  I did my version of the block diagram (I have attached to it), but I noticed that it only works only the first time I run the VI, subsequently, it displays the same results despite the entry of text or words. I find the my table has continued to add new entries every time that my for loop runs so I try to reset the table with constant strings at the beginning, but I guess that I did not it properly because I have the same problem.

  And I also have another problem: my array of words has its size = 7 and if I fill it with fewer words it's size, empty boxes in the results table appear as noted.

  Can anyone gve me a suggestion?

  The first attached VI is my original request where I found the problems described and the second contains what I have tried to correct

  Autoindexing if your friend here (and MUCH simpler because of things).

  Also know that "offset after match" will be-1 if the word was not found.  So you can just do a simple check for the number being greater than or equal to 0 see if it has been found.

  

• Problem with opening programs of text and photos after the upgrade of computer for Windows 8

  Original title: Photos open in Notepad

  Hello

  Laptop with win 8.

  Recently upgraded XP to win8 with purchased MS DVD.

  All text programs open graphics (pictures) in Irfanview & if I send them WORD show as hieroglyphics jeeperish.

  And all the photos to open Notepad in hieroglyphs jeeperish but if I open them with "Sendto" Irfanview or MS photo editor pictures appear.

  Seems the association went haywire. How can I fix this please?

  8 win in my PC is not that.      .. thanx... .Nick

  Hi Nick,

  Please contact Microsoft Community. I understand that you have a problem with opening the programs of text and pictures after the computer upgrade to Windows 8. I appreciate your efforts to solve this problem, I'll probably help you solve this problem.

  This problem could occur if the default applications are not set correctly.

  I suggest you read the article that will help define the default applications that Windows automatically uses when you open a particular type of file, such as a song, film, photo or Web page.

  Choose the apps Windows uses by default
  http://Windows.Microsoft.com/en-us/Windows-8/choose-Programs-Windows-uses-default

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Problems with line spacing and text in Indesign 6 rate

  Hello everyone. I'm a graphic designer working with new magazine layout in Indesign. I used Quark for years and recently fell on this problem...

  In a paragraph, we usually use a soft return back some words to the next line. However, there are opportunities, I notice that in doing so the lines above where I am bumping the word ebb and Exchange. I've never had a problem with this before and it is a serious problem for us. Is it a setting I have on that I'm not aware? What can I do to avoid what is happening?

  Thank you for any input or advice.

  It is one of the main differences between Quark and ID.

  ID has a "paragraph composer" for will as a simple line like Quark composer, and it is enabled by default. When you use the paragraph composer, text is constantly analyzed and spacing adjusted for better form and appearance (according to the spacing algorithm and parameters of your justification) for the whole paragraph. If force you a line break, ID can adjust all the lines above as well as the following lines.

  If it is a 'serious problem' you shoud probably witch to the composer line simple. You will find a drop down for it in the dialog box of the definitin of paragraph under the parameters of the Justification style, or you can change individual paragraph as a local override from the steering wheel to control panel menu.

  Most of us who've been ID user for some time find the paragraph composer include the forces of the ID, and feel that it generates more nice looking text than a single-line composer.

• What is the PROBLEM with Acrobat (randomly drops text)

  I'm at the end of my rope

  with Acrobat CS3. He distills randomly my specifications with all para

  graphs are missing here and there. Sometimes I can restart and get all of the document to print, but once again today, I have a contract which

  not print completely even after a reboot of the entire system.

  Trying to distill in Word 2003. Short documents on a page are generally good, even if I had problems with a few lines of text missing on invoices that I print on Excel. But this 5-page contract gives me headaches... I'll have to resort to printing and scanning the doc from back in the distillation in the form of a chart in PDF format, or copy and paste all in QuarkXpress, which has a PDF Distiller that is 100% reliable. I wish I could use THAT Distiller with Word! I can't stand it. Why Acrobat distiller cannot distill with reliable documents? A contract is a serious thing... missing paragraphs can mean serious legal trouble!

  I need an alternative, unless there is a fix for this problem.

  Mark, it could be that you need to install the MS Hotfix listed here:

  http://support.Microsoft.com/kb/952909/en-us

• [FlashMX 2004] Problem with a random set of animations

  Hello
  
  First, I want to thank all the people who make this interesting forum.
  
  I found a lot of information on this site to help me create my swf that I'm working on.
  
  But right now I have a problem I want to expose to you all
  
  
  My swf is quiet simple. I would like to show you the different animations at random, with a skeleton
  calendar. The list of animations are included in the library of the main animation.
  
  
  So I have this main animation, on the first image, copy the following code:
  
  _Global. MyTime = 5000
  
  to create a random number between x and y
  Math.Round (Math.Random () *(y-x)) + x;
  to create a random number between 2 and 7, we have:
  var $myvariable = Math.round (Math.random () * 5) + 2
  
  trace ($myvariable);
  gotoAndPlay ($myvariable);
  
  on the next 2 to 7 frames, I inserted on the animation of a library of each frame with a stop().
  
  inside the animation of the library on the first image, I have the following code:
  
  function GoGet() {}
  _level0.gotoAndPlay (1);
  }
  clearInterval (SlideInt);
  SlideInt = setInterval (GoGet, MyTime);
  
  on the last picture, I have a stop()
  
  
  
  So my problem is:
  
  at the beginning everything work fine, but after a minute, before starting the animation of the library to choose, he try to start 2 or 3 other Bookstore animations. so at first it's very careful, he just trying to start an animation before the pick, but after 2 minutes it trying to start the animations of the bookstore maybee 3 or 4.
  
  I guess that my code is not correctly defined in the order.
  
  If someone could give me some infomation, it will help me a lot. I apologize for my bad English.
  
  NB: it is possible to send my .fla on the forum?
  
  
  

  Finally I fixed it.

  Randomly

  Thank you very much kglad, in fact I couldn't that by myself, I learned a lot thanks to your help.

  If I can help you with something just contact me.

  Good bye.

• How to adjust the starting point of predefined text animation

  Hi all

  I am applying the standard presets - group multi-line text animation. Use the presetI is production.ffx. It works fine, but I can't understand how to set the start time. The animation starts in about 3 seconds, but I need to start earlier (about 1 second).

  Please, advise

  Thank you!

  Select the text layer.  Press u to reveal all the keyframes.  Move keyframes.

• HP Elitepad 900 G1 - problem with built in SD card reader.

  Hello.

  IM was a proud owner of HP Elitepad 900 G1 up to the point where I tried to put a 8 GB miniSD card in to built in card reader.

  The map was visible in the windows Explorer 8 for 15 seconds. Then he disappeared.

  After a long battle with drivers, internet solutions etc (nothing worked btw.) I ve installed windows 8.1 update.

  It still does not work.

  My card works perfectly in all the other electronic stuff (laptop computer, mobile phone).

  Can someone help me?

  I think I solved this problem. (Sorry for my English but I'm Italian).

  The solution is very simple, I tried several times and in my opinion, it works.

  It is necessary only to disable 'Quick start' options in Windows 8 / 8.1

  -WIN + X key, then go to 'Power Options'.

  ' - 'Choose what the switch / do"(click on it)

  "-"Change settings that are currently unavaiable"(click)

  -In 'settings Shoutdown', uncheck the 'enable quick start (recommended)'.

  Please tell me if it works for you.

• Two problems with the Acrobat DC text properties

  Since the switch to Acrobat DC, I have two questions, I have not been able to solve on my own.

  I can't change the default color of text in a text box in Acrobat DC. I chose "Text box add", type something in the box, choose 'Text properties,' change the police, size, and color, right-click from the edge of the area, then 'Create the current properties default.' It worked with Acrobat Pro, but with Acrobat DC it doesn't. The text I changed red returned to black. The other properties are OK.

  In Acrobat DC, I added the properties of text for quick access, but it does not work there. I highlight text, click text properties in the Quick Access toolbar, and nothing happens, but if I click on the text properties on the toolbar to comment, then the menu drop down appears and I can change the properties. I don't want to have the opening of the toolbar of comment, too much space on my screen.

  Hello

  We have released an update today that solves both of these problems. Please open Acrobat or Reader DC and visit help > check for updates to ensure that you are on the latest patch.

  Details on the release: https://helpx.adobe.com/acrobat/release-note/acrobat-dc-august-02-2016.html

  Please let us know how it goes.

  Thank you

  -ashu

• Several problems with embedded DHTML menu text boxes, drop-down

  We have recently improved HR 10 HR 2015.  We know a menu dhtml drop-down text question existed prior to the upgrade and the upgrade did not fix it.  We now have a more serious problem.  We are not certain that all started with the upgrade, but we detected it after you convert our projects to HR 2015 and republish them.  I list both here in case they are connected.

  The problem known: styles of multilevel list to the level of the main topic and within the text box drop-down dhtml to first level.  However, if we add a drop-down list box text in a drop-down text box and apply a list style at several levels to the text in the drop-down text embedded dhtml, the topic seems in good shape on the Design tab, but loses the line numbers or bullets in the preview and in the published version.  No idea what would cause the list not to display properly or how to get the multilevel list styles to work in this situation?  (Yes, we know we can use styles list rather than multilevel list styles, but it is problematic, too)

  

  The novelty is that, when content is published and read in IE or Chrome (the two major browsers use customers), the drop-down text link embedded dhtml is always present, but the text in the drop-down list embedded dhtml has disappeared (for example, nothing happens when you click on the link to open the text box).  It works in preview, but not when accessed through a browser (or access to the content of webhelp after publication to a server directly from my local computer).  Any ideas on how to get it to display?  The net result for our users, is that a substantial PART of the content of the assistance amount is now more accessible.

  Thanks in advance for any help you can provide to these questions!

  Here are a few things that I would consider trying.

  First, click on Tools > update DHTML and let it do its thing.

  

  A test to see if something has changed. If so, great!

  If the problem persists, open one of the samples project. Click here to see a video on how to do

  Then open Windows Explorer. Click here to see a video on how to do

  Find and copy a file called ehlpdhtm.js and return to your project and paste this file into so that it replaces the one that is there.

  Then see if things are better.

  See you soon... Rick

• forms of migration to 11g - problems with built-ins absolete

  Sorry if this is the wrong section, but the nerves are out and I'm lost.
  
  I tried to migrate from an old database 8i probably with his tools and forms in 11g. All the software seems fine, but when I try to run the forms I either get error 'this form was conducted using a generator of old forms", or worse - some enigmatic FRM and ORA (exception 6508) mistakes apparently connected to the lack of a procedure called in the form triggers.
  Now, you'd probably say "just recompile these forms. But I can't do it - I have tons of compilation errors, for the most part from built-ins absolete or try to select the views system. This occurs when you try to recompile the libraries referenced by these forms, which is probably why I get these procedure without error.
  Given that the quantity and the nature of those overwhelmed me that I tried to use Migration Wizard Forms... talk about Paris on the wrong horse. First I had to change the property of "start in" the shortcut assistants where I stored forms libraries either he kept to launch bookstores out of such forms. Then I got a bunch of files, LDP and the most important libraries without change, with no mention of any problem in the newspaper of the assistants. Needless to say that my forms always get these errors from lack of procedure.
  
  I'm sure I can figure it out somehow correct the forms if the libraries were ok, but I can not just deal with these problems:
  -What to do about system view selects in the library of procedures and triggers? The compiler treats just as unknown identifiers. I had the same problem also and it's privileges, but this time I can't identify the user whose privileges are read (actually, isn't one who is using the form at the time?) until now I noticed he's trying to use dba_users and dba_roles
  -What to do to correct a library (which can have dependencies on other libraries) to be compatible or at least compiles ' able with the new constructor of forms without having to spend a year on everything?
  I tried to apply changes mentioned in the journal of the assistants (like changing calls RUN_PRODUCT to RP2RRO. RP2RRO_RUN_PRODUCT), but he did not have a good

  First of all, you are in the right forum.

  database 8i probably with his tools and forms in 11g
  I get tons of compilation errors, for the most part from built-ins absolete

  You can look at Chapter 4 of * [Forms of e10394.pdf] Migrating from thedoc.1111of http://download.oracle.com/docs/cd/E12839_01/ of URLs to 11 g *.

  What to do about system view selects in the library of procedures and triggers? The compiler treats just as unknown identifiers. I had the same problem also and it's privileges, but this time I can't identify the user whose privileges are read (actually, isn't one who is using the form at the time?)

  Since you get the error when compiling, you must have sufficient privileges for all objects that are used in the application.

  More important still, if your version of forms before 6i, you cannot migrate them directly to 11 g. see Chapter 16.

  change of RUN_PRODUCT calls to RP2RRO. RP2RRO_RUN_PRODUCT

  As you deploy these forms on the web, I suggest using builtin RUN_REPORT_OBJECT instead of RP2RRO. RP2RRO_RUN_PRODUCT. And to do this, you must write a very simple code.

  Hope this helps you...

• Problems with export/save the text file in Indesign

  Hi scripters,.

  I have a problem that I don't know how to solve.

  InDesign CS3, Mac and PC - seen as the problem on some Macs, not all, but some still have / get this error.

  I made a script that collects the text of some managers of related texts:

  for (var i = 0; i < myMainList.length; i ++) {}

  var curTF = myMainList [i];

  while (curTF! = null) {}

  myExportString += curTF.contents;

  curTF = curTF.nextTextFrame;

  }

  myExportString += "\n\n###\n\n";

  }

  alert (myExportString);

  It collects the text and also it will display ok in the dialog box.

  However on some computers (Mac) the following will only produce a byte zero of the file (when there are several textframe in the above loop, a zero-byte file is still produced - but again, it is only on some Mac) If a single textFrame with only a small portion of the text is saved/exported it works:

  var Folder.myDocuments.path = myFolder + "/ Desktop/export";

  //alert ("Myfolder:"+ MyFolder ");

  {if(!myFolder.exists)}

  Folder (myFolder) .create ();

  }

  var myFileName = myFolder + "/" + win. FilePnl.FileGrp.FileName.text + ".txt";

  var myFile = new file (myFileName);

  myFile.encoding = 'text ';

  myFile.open ('w');

  myFile.write (myExportText.replace("/\u2011/g",'-')); Replace (/ [^ a-zA-Z 0-9] + / g, "));

  myFile.close ();

  It has to do with using .silence?

  I hope someone can help me with this summer working on this problem for means of time now.

  Thomas

  Somehow myExportString became myExportText.

  In addition, what happens if you replace the text before write you it

  to deposit?

  Another thing you could try is to cast it to a string as follows:

  String (myExportText)

  Also, maybe try to change the encoding "UTF-8".

  Substances

• problem with href in the text of the interactive report column

  One of my IR column contains the href tag, and when I try to do any operation (filter, sort, etc.) by clicking on the column header in IR it throws javascript error (unknown runtime error). I think that since the value of the column has a link text in it, something goes wrong with the built-in IR feature.
  
  It works with firefox but not in IE 6 or IE 7.
  http://Apex.Oracle.com/pls/OTN/f?p=50942:30
  
  Any help would be appreciated. Thank you.
  
  Kind regards
  Manish

  Manish,

  I don't know if your needs would allow for it, but I've made the following changes:
  1 added two columns to store the data of the manufacturer more standardized: title and url
  2 displays the title column in the IR, but the column is a link using the URL.
  3. enter in the URL as URL column and added a target = "_blank" attribute as well.

  You can always hide the URL column.

  Kind regards
  Dan

  http://danielmcghan.us
  http://sourceforge.NET/projects/tapigen

  You can reward this answer by marking as being useful or correct ;-)

• I have a problem with the display of text on Corel Draw X 3 after installing a Windows Update.

  Hi all

  No, not so much a question, but I thought I'd post here because it can help others.

  I used Corel Draw X 3 yesterday (12/12/12) to make a simple business card text only. Today - the file open and something is there, but the text is invisible. Further investigation revealed that this affected all fonts and Type 1 fonts from OTF, TTF fonts are immune to the problem.

  What has changed between yesterday and today? A Microsoft update that I shut down the computer last night. I uninstalled the update via Add/Remove Programs, and the problem was solved.

  Any suggestions as to who should I report this problem?

  -Frank Jones
  Dynamic funds, Geelong, Australia

  Original title: Win XP update Corel X 3 12/12 font management breaks?

  I have installed the latest updates and the v2 of KB2753842 solved the problem. Thank you.