[FlashMX 2004] Problem with a random set of animations

Similar Questions

• What is the PROBLEM with Acrobat (randomly drops text)

  I'm at the end of my rope

  with Acrobat CS3. He distills randomly my specifications with all para

  graphs are missing here and there. Sometimes I can restart and get all of the document to print, but once again today, I have a contract which

  not print completely even after a reboot of the entire system.

  Trying to distill in Word 2003. Short documents on a page are generally good, even if I had problems with a few lines of text missing on invoices that I print on Excel. But this 5-page contract gives me headaches... I'll have to resort to printing and scanning the doc from back in the distillation in the form of a chart in PDF format, or copy and paste all in QuarkXpress, which has a PDF Distiller that is 100% reliable. I wish I could use THAT Distiller with Word! I can't stand it. Why Acrobat distiller cannot distill with reliable documents? A contract is a serious thing... missing paragraphs can mean serious legal trouble!

  I need an alternative, unless there is a fix for this problem.

  Mark, it could be that you need to install the MS Hotfix listed here:

  http://support.Microsoft.com/kb/952909/en-us

• Problem with MERGE INTO setting

  Oracle Hello community,
  
  Server: 11.1.0.7
  
  My MERGE statement is very slow. I cut again and made a single update and a single insert statement, and it is much faster, the cause of a suspicion / * + rule * / use. When I try to use the same trick for the MERGE statement, it won't work, it still takes much too long. Before I post my Merge statement, is the problem with advice and FUSION?
  
  Ikrischer

  Thanks for all the entries that you have provided.

  What intrigues me is the fact that your cardinalities are always 1.
  (Unfortunately I have no available DB 11.1)

  When I run the routine, all the tables are empty and all tables are analysed.

  Can you describe your routine more in detail?
  What measures are being processed?
  Is it a kind of ETL process? At what point in your process are you collecting statistics and how?
  Are you really using the command "scan table", or are you using "dbms_stats.gather_table_stats?

• Anyone having problems with crashes after setting the units (lb/po2) on an indicator on the dipstick?

  I use an indicator of money gauge to show pressure. With no set of units, everything seems to work properly. When I set units 'psi' and immediately try to save LabView hangs and crashes immediately after each next attempt to open the file project or VI. I'm using LabView 2012 (12.0f3) 64-bit on Windows 8. It is the first crash, I had. Unfortunately, it seems that the file is corrupted and I lost a few hours of work. Now I'm afraid to continue using this VI of fear he crash of something else and corrupt the file and I'll lose my progress. Any help would be greatly appreciated. I presented the crash to the settlement report, but who knows how long it takes to move to study the problem.

  Hi Arcus,

  If you search the forum you will find a large number of "moaning" on the buggy and incomplete unit support in LabVIEW. My favorite is the square function (available from LV2009?) which will follow "4 m" when you want as the square of "2 m". Of course: meter ^ 2 is always meter. And we're just talking a very basic unit...

  

  You will also find on the controls of the money bug reports.

  Combine all these threads in your own conclusions!

  I don't use controls of the money, and usually I stay away by using units of our days...

  BTW: I would also stay away from units such as "psi". Just my continental Europe perspective

  (Once I got to work with a machine (treatment of semiconductors) produced in the United States. She had 4 gauges next to each other using 3 different units: lb/po2, inHg, Torr. There must be a reason to do it, but have you ever needed to compare these pressures? Easy to remember these conversions...)

• Local data store renaming problem with the cmdlet set-datastore

  Hiya,

  I just started using powercli to configure my ESX Servers 4.1i.

  Most of my script version works fine - but I can't rename the local data store.

  I do a get-data store based on the name that works very well, I then pipe series-store data with a new name-, but it just seems to ignore the order and leave it with the old name.

  No error message is produced.

  I pasted in the results of the "get-data store" (just to show that it exists) and the results of the 'get-datastore piped to set-data store", below.

  I'm sure I'm missing something really obvious - but I do not know what?

  [vSphere PowerCLI] D:\powershell > get-datastore-name 'test1' | fl

  
  DatacenterId: Datacenter-ha-datacenter
  Datacenter: ha-datacenter
  ParentFolderId: Folder-ha-folder-datastore
  ParentFolder: datastore
  DatastoreBrowserPath: vmstores:\ohst213vmh.blah.co.uk@443\ha-datacenter\test1
  FreeSpaceMB: 64207
  CapacityMB: 64768
  Accessible: true
  Type: VMFS
  ExtensionData: VMware.Vim.Datastore
  ID:-Datastore-4d4c2877-c48e1465-b0be - 00237d 358458
  Name: test1
  UID: /[email protected]:443 / Datastore = Datastore-4d4c2877-c48e1465-b0be-002
  37d 358458.

  [vSphere PowerCLI] D:\powershell > get-datastore-name "test1" |-store game data-name 'test2' | fl

  
  DatacenterId: Datacenter-ha-datacenter
  Datacenter: ha-datacenter
  ParentFolderId: Folder-ha-folder-datastore
  ParentFolder: datastore
  DatastoreBrowserPath: vmstores:\ohst213vmh.blah.co.uk@443\ha-datacenter\test1
  FreeSpaceMB: 64207
  CapacityMB: 64768
  Accessible: true
  Type: VMFS
  ExtensionData: VMware.Vim.Datastore
  ID:-Datastore-4d4c2877-c48e1465-b0be - 00237d 358458
  Name: test1
  UID: /[email protected]:443 / Datastore = Datastore-4d4c2877-c48e1465-b0be-002
  37d 358458.

  See you soon

  Jordan

  When you add a server ESX to vCenter, agent VirtualCenter (vpxa) service is installed on the ESX Server.

  All actions you take in the vSphere ESX server customer or a PowerCLI script when you are connected to the vCenter, passed through this vpxa service. This service manages the resources on the ESX Server.

  To avoid problems when you change some resources directly from the COS of ESX, vpxa services locks these resources.

  That's why you can not change the datastorename when you are connected directly to an ESX Server that has been added to a vCenter.

  BTW, if you connect a vSphere client directly to the ESX Server, you will see the same phenomena as what you see in your script PowerCLI.

  If you need to change the datastorename locally on the ESX for some reason, you can try to remove the ESX Server with Remove-VMHost to vCenter, connect to the server with Connect-VIServer ESX, make your changes and add it to the vCenter with Add-VMHost.

• problem with variable/table setting

  Hello

  in a flash model, I found several buttons with almost the same action script code. When you press the button a popup window with different text (for each button a single text).

  the following code in the code section, buttons, only the last two codelines are different for each button.

  (release)
  {
  _root.scrHEIGHT = 200;
  _root.scroller.scroller.gotoAndStop (2);
  _root.scroller._x = 100;
  _root.scroller._y = 90;
  _root. TM_title = "Info Box";
  _root. READ = 22;
  }

  so, I think that the entry of the single text for each button is managed in the last line '_root '. READ = 22 ".

  I also found the parts of text of belonging to the library. now, my problem is that I don't know where the connection is defined between the text and the variable READ/table. in this case, the connection is 22, but I find all well in the part of text or the property of the button when the connection is set to 22. I'm using flash cs4. anyone could help me?

  Thank you very much

  Pascal

  You said that you were able to locate the text elements in the library.  What about them implies numbers, you see?  Right click on them and examine their properties and Assembly.

  Also, what do you find in the _root.scroller.scroller framework 2?

• Problems with static IP setting for the port forward through 2 routers

  I currently have cable internet connected to a router (Linksys E2000 w / v1.0.03 firmware). This router is connected to another router, a Linksys E3200 with firmware v1.0.02. In order to correctly forward ports through the E3200, I understand that I need to set up a static IP address on the router.

  I almost followed the steps in this video, but when I enter all the IP addresses for the static IP address settings, it allows me to access the router configuration page. I try to get the new IP address that I gave (which he tries to move automatically once I have save settings) and the connection times out. I am able to access internet otherwise, however. From here, I have to do a factory reset on the router and start from square one.

  Anyone have any ideas? I'm quite frustrated and would like to get ports forwarded so I can get my server properly set in place.

  1. If it has connected LAN - LAN you will need to disable the DHCP server on the E3200.

  2. the best option would be to use the 'bridge' on the E3200 mode (in the latest firmware) and connect the internet port to the main router.

  3. If connected LAN - LAN (or in Bridge mode) all internet related functions on the E3200, including ports are not relevant. There is no need to set up the port on the E3200 redirects. All shipping is done only on the E2000 and nowhere else.

  4. What is the address LAN IP of the E3200? What is the address LAN IP of the E2000?

• Windows 7 computer to dial the connection problem with baud rate setting do not stay together

  I've set the com port [converter usb to serial com cable 5] setting baud rate to 115200

  I set up the adjustment [communication between 2 computers cable] modem baud to 115200

  In the center of network share, I create a new network connection [set up a dial-up connection]

  When I check the properties of the dial-up Modem connection set to 19200

  I can't change to 115200 - but the connection is attempted to 19200, so it fails

  All solutions?

  Hello Stephen,

  Thank you for visiting the Microsoft Community Forum.

  According to the description, I understand you are trying to reset the baud rate for your dial-up connection. You tried to change the BAUD rate in your login from 19200 to 115200, but the connection attempt is made at 19200 and if it fails every time.

  I suggest you to check with your ISP (Internet Service Provider), if they have their own custom settings saved using an application that controls the baud rate.

  You can also view the following Microsoft help articles.

  SerialPort.baudrate, property

  http://msdn.Microsoft.com/en-us/library/cc561279.aspx

  SerialPort.BaudRate enumeration.

  http://msdn.Microsoft.com/en-us/library/cc561279.aspx

  Hope this information is useful. Please write us back for any further assistance.

• Problem with customization specifications setting Administrator Password Manager

  I have two problems.

  I have a model R2 Windows Server 2012 in a vCenter 5.1 (Build 1123961) environment. I created a vSphere Client Windows customization feedback, however, (and the main issue) I notice that it does not have the administrator password to what I entered after it don't this is sysprep deployment of a model.

  I've created a script around to do this, which works very well, unless I experience my second question. When customization is started, it creates the event "vim.event.Customization.StartedEvent". He is then supposed to create the 'vim.event.CustomizationSucceeded' event once it has successfully managed the customization, including the command sysprep (and setting the password). Occasionally, but does not trigger the event "vim.even.CustomizationSucceeded" until the days or weeks after the initial event of beginning of customization, which will cause the sysprep crush my difficulty scripts and not allow me to log in under the administrator because of the question first, main account.

  Any thought to why sysprep does not have the administrator password to what I specified in the customization of the OS? Or why the successful event of customization does not always raise after it was launched (in minutes and not days/weeks)?

  I ask just once more: the administrator password model guest empty OS?

  vSphere 5.5 Documentation Centre : you can change the administrator password if the password for administrator on the Windows virtual machine is empty. If the model or the Windows virtual machine already has a password, the administrator password does not change.

• PROBLEM WITH MY MOUSE SET

  An easy way to fix a mouse, buy a new one. I did + a new keyboard.

  @BOB7732, welcome to the forum.

  Sometimes it's just better get a problem of new combat aircraft.  In my opinion, most recent are always better.

• Problem with keyboard - random letters French

  I'm not very savvy computer. I have this recurring thing happening and I don't know what to do. I type in word and all of a sudden when I need to use some keys I'm french letters. I don't know if I'm pressing something that does this automatically, but if anyone can help I would really appreciate it.  I can't complete my work MEETINGS frame them becomes an e with a line at the top

  Control Panel > region and language > keyboards and languages > change keyboards
   
  Remove all of the keyboards that are not English US/Canada/UK...

  -Mike Hall MVP Windows: consumer http://msmvps.com/blogs/mikehall/ Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• Problem with the Patch Set 2 (11.1.1.3.0): suspendVisitingContext

  I use: JDEVADF_11.1.1.3.PS2_GENERIC_100408.2356.5660
  Given that I've updated 11.1.1.2.0 to 11.1.1.3.0, I can always deploy my application to the WebLogic server integrated but not externally.
  I thought it may be caused by the use of an older version of WebLogic on the external server, so I installed the new version of WebLogic, but I still have the same error:
  
  < 3 May 2010 20:51:06 CEST > < opinion > < Diagnostics > < BEA-320068 > < Watch "UncheckedException" with severity "Notice" on the server "AdminServer" released on May 3, 2010 20:51:06 CEST. Details of the notification:
  WatchRuleType: Journal
  WatchRule: (SEVERITY = "Error") AND ((MSGID = ' BEA-101020') OR (MSGID = "BEA-101017'") OR (MSGID = "BEA-000802'"))
  WatchData: DATE = may 3, 2010 20:51:06 CEST SERVER = AdminServer MESSAGE = [path of the module: mon_project ServletContext@13194766[app:MY_PROJECT: / mon_project spec-version: 2.5 version: V2.0], request: [weblogic.servlet.internal.ServletRequestImpl@18dd7c6
  GET /MY_PROJECT/faces/adf.login-success?_adf.ctrl-state=a4u3jtypb_4 & _adf.no - new-window-redirect = true & _afrLoop = 2160319053905063 HTTP/1.1
  Connection: keep-alive
  User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.0; Chrome/4.1.249.1045 en-US) AppleWebKit/532,5 (KHTML, like Gecko) Safari/532,5
  Referer: http://MY_PROJECT/faces/adf.login-success?_adf.ctrl-state=a4u3jtypb_4 & _adf.no - new-window-redirect = true
  Accept: application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5
  Accept-Encoding: gzip, deflate, sdch
  Accept-Language: en-US, en; q = 0.8, en - CA; q = 0.6, en; q = 0.4
  Accept-Charset: ISO-8859-1, utf-8; q = 0.7, *; q = 0.3
  Cookie: ADMINCONSOLESESSION = xQCjLfTBfCvW65mvcTQFq1GvHbFQw5GcTVByT7gKkMrJpdLGGd2p! 1272577567; JSESSIONID = Y3KbLfbXJj12QlZHvvDX8nhyP2QlF1GKsf9xKfvC8p8C3pDlnQvx! 2063798385
  Root cause]] of ServletException.
  java.lang.NoSuchMethodError: oracle.adf.view.rich.component.fragment.UIXInclude.suspendVisitingContext (Ljavax/faces/context/FacesContext ;) V
  to oracle.adfinternal.view.faces.taglib.region.IncludeTag$ FacetWrapper.setupVisitingContext (IncludeTag.java:665)
  to oracle.adfinternal.view.faces.taglib.region.IncludeTag$ FacetWrapper.processFlattenedChildren (IncludeTag.java:601)
  at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:160)
  at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:75)
  at oracle.adfinternal.view.faces.renderkit.rich.PanelSplitterRenderer._renderPane(PanelSplitterRenderer.java:1035)
  Truncated. check the log file full stacktrace
  >
  
  Where I replaced the name of our project by mon_project.
  
  I think it may be related to the use of the 'running the Application (11.1.1.2.0) development' which cannot be updated, downloaded from: http://www.oracle.com/technology/software/products/middleware/htdocs/fmw_11_download.html
  as explained in http://radalcove.com/blog/?p=34
  I can still deploy on the external server with the old version of JDeveloper.
  
  Any idea of solution?
  Do you think it is something that I can fix it, or it may need the intervention of a person of Oracle?
  
  Thank you
  JP

  Hello

  As far as I know the Jdev + libraries must correspond to the version WLS + libraries.
  If you need a WLS 10.3.3 with ADR 11.1.13 for JDev 11.1.1.3

  Take a look at this: 11.1.1.3 certification information

  HTH
  Paul

• problem with built-in predefined text animations

  Hello

  I just started my first job with AE.
  I want to do a very simple thing: animate text (to be precise, only 3 short words) with one of the excellent effect built in, which was delivered with the product.

  But I realized, that the end result of the effect, that I chose in the list, is different from that how I saw on the site Adobe Gallery.
  Then I tried other effects too (Flash, Flash blue) and with the AE is not the same, I'd say it's on another comprehensive plan.
  For example, text Pulse exposure effect appears to be a very complex thing on the site, while at AE makes only fade in and out of my text: no outline around the letters. characters also do not in growth and shrinkage, so it lacks almost all the fancy functions, that how the effect shows on the Web site.

  Can you please help me where is the problem? Thank you.

  I just tried exposure pulse, and it works very well for me.

  It is possible that the problem you see is related to this tip/warning of "text animation presets", the page I linked to before:

  "If the animation preset requires a color contour or background, animated works only if you have assigned to your text."

  Pulse exposure works by animating the race.

• Problem with load LOV value reset

  12.1.3 ADF

  I am facing a problem with load LOV set to reset.

  I have a page in waterfall surrounded by af LOV: PanelFormLayout. Also do some validation on the data entered by the user when clicked on submit. If the validation fails, an alert will appear on the validation failed and user will stay on the same page.

  Values LOV child get back their null or empty when you click on the "submit" button. It works as expected when the validation failed and the user has navigated to the next page. But if validation fails, the user stays on the same page and child LOV connection reset to NULL or emptyvalue. For this reason, NPE error occurs when the user attempts submit again and have to select again the child value LOV.

  Is it possible to keep the child LOV value even after submitting a form?

  Page code:

  < af:panelBox text = "Product Details" id = "pb4" >

  < af:panelFormLayout id = labelWidth "180px" = "pfl4" >

  < af:selectOneChoice value = "#{bindings." ProdType.inputValue}.

  label = "#{bindings." Required to ProdType.label'} = 'true '.

  requiredMessageDetail = "product Type cannot be NULL. Please select a value.

  shortDesc = "Select the Type of product" id = "soc1' autoSubmit = 'true '.

  showRequired = "true" contentStyle = "width: 150.0px".

  Binding = "#{viewScope.provBean.prodType} '"

  valueChangeListener = "#{viewScope.provBean.prodTypeVCL}" >

  < f: selectItems value = "#{bindings." ProdType.items}"id ="si1"/ >

  < f: validator binding = "#{bindings." ProdType.validator} "/ >"

  "< af:target execute="@this "make ="soc2"/ >

  < / af:selectOneChoice >

  < af:selectOneChoice value = "#{bindings." ProdVer.inputValue}.

  label = "#{bindings." Required to ProdVer.label'} = 'true '.

  requiredMessageDetail = 'Product Version cannot be NULL. Please select a value.

  shortDesc = 'Select Product Version' id = 'soc2 '.

  Disabled = ' #{bindings. " ProdVer.inputValue == null} ".

  contentStyle = "width: 150.0px" showRequired = "true".

  Binding = "#{viewScope.provBean.prodVer}" >

  < f: selectItems value = "#{bindings." ProdVer.items}"id ="si2"/ >

  < f: validator binding = "#{bindings." ProdVer.validator} "/ >"

  < / af:selectOneChoice >

  < / af:panelFormLayout >

  < / af:panelBox >

  Timo thanks for your response.

  Child LOV I created is an attribute of transient and resolved the problem by setting the property of passivation to true.

• Problems with the module supplier of personalized identification information and overview of VMware View Client working together

  I have a Horizon of VMware View client that connects me HVD Windows 7. So when I give view client Vmware Horizon my credentials, it auto logs me. I also created a custom credential provider that works on Windows 7 PC. When I install the custom in the HVD credentials provider, it works if I am already connected to HVD and I simulate CTRL + ALT + DELETE. Can I use my credential provider to "unlock" in. However, if I disconnect of HVD and try to connect using VMware Horizon View client to connect to Windows 7 of HVD, it gets stuck on the screen of the tile. I see the VMware SSO user tile but nothing happens when I click it. Then, I use my provider of customized credentials to connect. I expect to bypass my ISP credentials on the first connection and self as before.

  Anyone have any ideas?

  Thanks for your help.

  OK, I did some more troubleshooting and discovered that it was a problem with auto connection set to TRUE on my side of custom credentials provider (I pbAutoLogonWithDefault to TRUE). Since I still like it TRUE, I had originally set it to FALSE and then change for REAL once my credential provider was used.

  Thank you!