Problem with buttons in the table header repeated

Similar Questions

• Unique problem with selction on the table (Query Page)

  Unique problem with selction on the table (Query Page)
  
  I have a VO data Bulletin Board, with a transitional attribute for selction unique column.
  My requirement is that I need to identify the line that was selected in the table.
  
  I associated with fireAction singleSelection column, such that whenever the user selects the line
  I'm looking for that VO using some rowIterator.
  But when running the loop of the transient VO that is mapped to the singleSelection variable is the show as "n" / NUll
  for all the lines...
  
  So how do you identify the selected line in singleSelection to a table.
  
  -Sasi

  In the property inspector of the element for which you've put firePartialAction, you can find a property named "parameters". That mention primary key as your setting.

  You can get the arameter using pageContext.getparameter ();

  -Anand

• Problem with trigger on the table

  Hello
  
  I have the table TEMP AS (NUMBER of SNO
  STATE VARCHAR2 (50).
  DATE OF UPDATE_DATE)
  
  I want to create the trigger on this table as each time that it is updated in the STATE of temporary table UPDATE_DATE updated columns.
  I am creating the trigger using the PRAGMA autonomous transaction, but it does not work with that and withouht PRAGMA.
  With PRAGMA I get the error message ' ORA-00060: Deadlock detected while you wait resource. "
  
  Is it possible to create triggers on this table to update columns in the same table.
  
  Published by: user6040008 on December 11, 2012 01:08

  Hello
  This is not a valid forum for questions like that. Thank you for using {forum: id = 75} forum. However, you can use following code:

  
  create or replace trigger xx
  before update of state
  on cabasys.temp
  for each row
  begin
  :new.update_date := sysdate;
  end; 
  

  Published by: kikolus on 2012-12-11 10:40

• * Very difficult problem with Firefox involving the 'table-layout' attribute and intercellular

  I tried to figure this out for days and I feel like my head's going to explode. I don't think same words could describe the relief if anyone can solve this problem for me.
  
  I described the problem here to make things easier: http://morthian.googlepages.com/Untitled-2.html

  I found a solution. If I use a div inside the cells rather than give them a class, the problem goes away. It will take me hours of monotonous work, but I'll do what I have to do.

• JTable with custom column model and model table does not display the table header

  Hello
  
  I create a JTable with a custom table model and a custom column template. However the table header is not displayed (Yes, it's in a get). I have narrowed the problem down in one compilable example:
  
  Thanks for your help.
  

  import javax.swing.*;
  import javax.swing.table.*;
  
  public class Test1 extends JFrame
  {
       public static void main(String args[])
       {
            JTable table;
            TableColumnModel colModel=createTestColumnModel();
            TestTableModel tableModel=new TestTableModel();
            Test1 frame=new Test1();
  
            table=new JTable(tableModel, colModel);
            frame.getContentPane().add(new JScrollPane(table));
  
            frame.setSize(200,200);
            frame.setVisible(true);
       }
  
       private static DefaultTableColumnModel createTestColumnModel()
       {
            DefaultTableColumnModel columnModel=new DefaultTableColumnModel();
            columnModel.addColumn(new TableColumn(0));
  
            return columnModel;
       }
  
       static class TestTableModel extends AbstractTableModel
       {
            public int getColumnCount()
            {
                 return 1;
            }
  
            public Class<?> getColumnClass(int columnIndex)
            {
                 return String.class;
            }
  
            public String getColumnName(int column)
            {
                 return "col";
            }
  
            public int getRowCount()
            {
                 return 1;
            }
  
            public Object getValueAt(int row, int col)
            {
                 return "test";
            }
  
            public void setValueAt(Object aValue, int rowIndex, int columnIndex)
            {
            }
       }
  }

  Published by: 802416 on October 14, 2010 04:29
  added

  See http://download.oracle.com/javase/6/docs/api/javax/swing/table/TableColumn.html#setHeaderValue (java.lang.Object)
  When the TableColumn is created, the default headerValue is null
  So the header ends up rendered empty label (probably of size 0 if the JTable calculates its size of header based on the size of the default rendering tool).

  It worked:

       private static DefaultTableColumnModel createTestColumnModel()
       {
            DefaultTableColumnModel columnModel=new DefaultTableColumnModel();
                  TableColumn col = new TableColumn(0);
                  col.setHeaderValue("Header Title");
            columnModel.addColumn(col);
                  return columnModel;
       }
  

  Published by: jduprez on October 14, 2010 14:09
  Beaten by a fraction of a second!

  Published by: jduprez on October 14, 2010 14:10
  OK, by a split of 17 minutes, specifically: o)

• Command button inside the column heading in the table of the ADF

  Hi all
  I want to insert two command buttons inside the column header of a table of the ADF.
  In my mind these buttons should replace the buttons two default (triangles) to sort the column in ascending or descending order.
  You know a solution? Because it's 2 days I'm trying, but no way.
  
  Thanks in advance
  Stefano

  have you tried facet the af pane header: column?

  
    
      
      
        
          
          
        
      
    
  ...
  

• Problem with buttons to quick launch on HP Pavilion dv6-2090eo notebook pc

  Hey

  I have problem with my laptop, the button, mute and wifi sound suddenly stopped working from one day to the other. I can't turn off the sound and turn on wifi, so it is a huge problem for me and I don't know how to solve this problem, I hope some of you could help me solve the problem?

  My product number is: VS078EA #UUW

  I hope you can help me...

  Hello

  Try the following.

  Shut down the laptop, remove the AC adapter and remove the battery.  Press and hold the power button for a minute, then reinsert the battery, plug in the power adapter and start the laptop.

  Kind regards

  DP - K

• Is there a problem with ValueChangeListener and af: table?

  Hello...
  
  I use JDeveloper 11.1.2.0.0
  
  Is there a problem with ValueChangeListener and af: table.
  
  Here my problem...
  
  I have two inputtext in af:table and I want to change the value of inputtext2 when I change the value of inputtext1
  so I put the autosubmit = "true" to inputtext1 and set the valuechangelistener method that is in the page bean
  and I put the partial inputtext2 trigger = "inputtext1 id".
  
  but when I run the page and change the value of inputtext1 that nothing happens.
  
  But if I have the previous scenario in af:panelFormLayout instead of af: table its work and the value of inputtext2 is changed to the user.
  
  any ideas...
  
  Thans.

  Sorry for the delay... :(

  And why if I use page JSF is the binding property disappears
  in the tab advanced in the property inspector.

  If you cannot power discovered the binding property in the palette of the means, your jsff page is automatically linked.
  If only the problem.

  try to create the new page jsff, while creating jsff, finally there is radio box something like
  do not expose the UI components automatically. check and create.

  and create a java file. Then you can bind components with the java file as you wish.

  to check your jsff page is autobinded are no means?
  Open your jsff page.

  Menu's that are on it - in this section. You can see the design menu that struck. If you hit it means you see Wizard property page go to the tab component binding
  There is a check box available

  If the box is ticked means that you page are automatically linked. If this isn't the case, you must link.

  -edited lately.

• problem with Safari and the opening of sites

  problem with Safari and the opening of sites

  Please describe the problem in more detail?

  Try to reset the settings of Safari:

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select the Preferences/Privacy tab

  4. click on remove all data from the Web site

  5. close Safari.

  Remove cache Safari files:

  1. click on finder

  2. look for the menu GO to top

  3. click on GO and hold down the option key. This will show a user library folder.

  4. click library and find the Caches folder

  5. in the folder caches com.apple.Safari Ouvrezledossier

  6. move the Cache.db file Trash.

  This should solve the problem. If it does not help, try to disable the Safari extensions

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select Preferences

  4. find the Extensions tab

  5 disable all extensions of

  6. relaunch Safari

• Having a problem with loading in the combustion chamber

  Hello

  I'm having a small problem I could use help with. I'm not really sure what's going on, but I'm having a problem with one of the pages of my site does not when you try to view the page in Firefox. But if I loaded this page in Safari or Chrome, it loads very well.

  Here is the URL of the page to take a look:
  _{Specific link removed by moderator display ~ J99} < sitename >.com/top-10/top...services/

  No idea why this might be happening or how to fix it? I don't know if it's just my computer, or if others have the same problem.

  Thanks in advance,

  Mike

  There's two of us have confirmed the page will load so I deleted the link to display as it could be construed as advertising.

  P.S. Note only forum content in the resolved threads is now indexed by search engines.

  (Last updated: February 14, 2015 08:45 CEST)

  Solved the locked thread now ~ J99

• Using an IP191 monitor, have random horizontal stripes on the screen - have no problems with other browsers. also no problem with FF on the other PCs on the family

  Using an IP191 monitor, have random horizontal stripes on the screen - have no problems with other browsers. also no problem with FF on the other PCs on the family.

  These "streaks" seem to be the domain of the high frequency analysis; they can be eliminated by scrolling upwards or downwards.

  Hello, maybe it's a problem with hardware acceleration - try updating your graphic driver, or in case this does not solve the problem, or there is no new version available at the time, disable hardware acceleration in the firefox menu

  

  > options > advanced > General.

• I have an older version of Firefox 3.6.6 I think I'm having a problem with one of the websites that I sign. Is it possible to upgrade to the latest version

  I have an older version of Firefox 3.6.6 I think I'm having a problem with one of the websites that I sign. Is it possible to upgrade to the latest version. Without losing all my favorites and the saved passwords?

  Yes, see this article:

  • Import bookmarks and data personal from another browser

  After:

  • Update to the latest version of Firefox

• Problem with Vista hit the Satellite X 200 - 20 s

  Sometimes during typing on vista, it will stutter and freeze. The time is very short. Is this a problem with vista or the laptop. The T7300 Core 2 Duo 2 ghz processor.

  Hello

  I have a Satellite Pro S200 and the same problem was with my camera. It s is not a hardware problem, it s more a driver related issue No. So, the best thing you can do is update your bios and keep your drivers up-to-date. Just check the download Drivers Toshiba site and make sure you have the latest drivers installed.

  I had resolved my stuttering (core2duo 2.33 Ghz, 2 GB RAM) by updating all drivers...

  That's all

  Good bye

• Want to Phoenix 860-010: problem with fonts and the noisy fan

  I have a new machine, just a day old, and I'm having a problem with fonts.  The file Explorer, Edge and other similar programs seem to go from a very readable font that lights up in half a second or less whenever I move down on the page in these applications.  Police that results is much more difficult for me to read because of the lightness that results. I have not met this problem before.  Frankly, I don't know the source of the problem.  Is it hardware (video card) or (Windows 10) operating system software?

  Hello @PhotoGene47,

  Thanks for the quick response!

  Have you tried to see the document that I mentioned in my previous post?  If you prefer to have the Board repaired, you can consider contacting the HP support by phone for additional options.  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!

• a problem with one of the files in the TestStand\AdapterSupport\LabVIEW directory

  When looking at the module a LabVIEW VI called for TestStand, I get the following message:

  A problem with one of the files in the TestStand\AdapterSupport\LabVIEW directory.  Please reinstall or repair.

  I made the mistake of cleaning C: in my computer.  Clean the C:\National Instruments downloads

  Why would someone put bits of applications or modules, etc. in such a directory?

  I'm not too crazy about restoring 11FR in this folder.  It's just crazy!

  If anyone has encountered this before?  No "easy"? outside re - install TS...

  Side note: I do not touch anything in the \Program files. National Instruments\TestStand\AdapterSupport\LabVIEW

  What version of LabVIEW and TestStand do you use?

  In 2012, TestStand, this directory is mapped to:

  C:\Documents and Settings\All Users\Documents\National Instruments\TestStand 2012\AdapterSupport\LabVIEW

  Have you tried mass compiling the screws in this folder?

  I had to create a new 'TestStand - default values XX.llb"file, where XX is the last version of LabVIEW you use, but I have not seen this message before.

  Good luck

  PH