Problem with buttons to quick launch on HP Pavilion dv6-2090eo notebook pc

Similar Questions

• Pavilion DV7-3125sf buttons to quick launch DRIVER failed

  Hello

  recently I formatted my PC "HP pavilion Dv7-3125sf" because of hard drive problems

  now I'm on (Windows 7 Professional x 64)

  and I downloaded all the drivers and multimedia software of HP 'support & drivers '...

  everything is cool otherwise buttons to quick launch... normally if you change the volume there show a Volume bar, now the volume change but there is no ban on Volume...

  -How can I download this (in the HP drivers & support there is no software for this)

  Thank you!

  Hello

  Download and install MediaSmart SmartMenu on the link below and save this to your desktop.

  FTP://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45140.exe

  Once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation.  When it finished, restart the computer and check if you have now the volume display.

  I hope this helps.

  Best wishes

  DP - K

• A problem with the web by launching the EAS console - Urgent!

  Hello Experts,
  
  One of my clients has a problem with the web by launching the Regional service console. When tried to start, was inviting to install a .jnlp file. Customers already have Java 2 Platform SE Version 1.5.0 (build 1.5.0_13 - b05) installed on the computer. Make it necessary to install more than that?
  
  Version: 11.1.1.1.00
  
  Please notify. Thanks in advance
  
  Kind regards
  Jingle
  
  Published by: 637223 on January 14, 2009 03:09

  Hello

  They should be able to execute it, it took Java Web Start, which was part of the installation of the JRE from version 1.4
  If you go into control panel - java then java Control Panel click the java tab, under the JNLP section click the button show, if everything is correctly installed, it should show the versions and whether they are enabled or not.

  If they are enabled, then JNLP should work automatically, you may need to reinstall the JRE.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• treble buttons to quick launch keeps flashing on the screen and wifi turn off voltage

  HP pavilion dv8 quick launch button treble keeps flashing on the screen and now and again the wifi turns off and I have to keep back on.

  Hello

  Unless you have already done so, download and apply the firmware update for the capacitive strip on the link below which is intended to fix this particular problem.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-96360-1&cc=us&DLC=en&LC=en&OS=4063&product=4034201&sw_lang=

  After the update has been applied, restart the laptop.

  Kind regards

  DP - K

• Problem with IMovie and Quick time

  Hey everybody,

  I am faced with an unexpected problem with Quicktime and I Movie, and I was wondering if someone had already known that:

  I want to create a film based on shots from my personal camera. I started to work with IMovie to create a sequence of opening and added his musical band. I exported the scenes in Quick Time format without any problem. However, when I merge the exported sequence of I film with shots of my video camera, the soundtrack is completely eliminated.

  I checked on the Internet and saw that there might be a problem of "Codecs". To avoid this, I exported the sequence IMovie with Codecs of same as one of my video camera files.

  Now, if I compare the files exported from I Movie and those of my video camera, they have identical characteristics. However, the soundtrack will always disappear when I merge them.

  Could someone please help me solve this problem?

  Thank you very much in advance.

  Concerning

  Could someone please help me solve this problem?

  Not only based on what you already said.

  I want to create a film based on shots from my personal camera. I started to work with IMovie to create a sequence of opening and added his musical band. I exported the scenes in Quick Time format without any problem. However, when I merge the exported sequence of I film with shots of my video camera, the soundtrack is completely eliminated.

  How would you"merge" files? (I.e. a "QuickTime" format is any form of data compatible with the platform of supply and the specific structure of QT incorporated into real employment that is stored in a container of MOV file on any of up to 99 tracks possible). Also, what app do you use for reading the file 'merged '? (For example, some media players ignore secondary audio tracks as a result of some methods of 'fusion' of files so it is important to know how the files are "merged," whether or not the audio data are "scattered" several tracks, and/or if the Media Player supports playback of multiple, sequential audio popular.)

  I checked on the Internet and saw that there might be a problem of "Codecs". To avoid this, I exported the sequence IMovie with Codecs of same as one of my video camera files.

  The specific codecs and settings using the specific version of iMovie? (The current Mac OS X operating systems have two X QT and 'classic' Qt integrated structure so it is important to know what structure is used here and how).

  Now, if I compare the files exported from I Movie and those of my video camera, they have identical characteristics. However, the soundtrack will always disappear when I merge them.

  As a general rule, you should review the file "merged" to determine why it does not play back correctly rather than comparing the characteristics of the source being merged files. The main problem here seems to be in your project workflow. That is, you seem to be when you perform an operation in two steps rather than edit several iMove multimedia files and then export the combined results in a video the video and audio tracks have been flattened and exported in standard compression formats with unified settings, features and the.

  

• Problem with button Flash HTML Canvas document click on opening multiple browser windows

  Here is the code I use. When I click on the buttons, they open a new browser window.

  If I go back to the new buttons and click on them, they open two browser windows.

  If I repeat the process again a click will open three windows, etc. etc.

  It does in 6.1.6 Safari and in Firefox 35.0.1 but it functions correctly - just open a browser by clicking window, in Google Chrome.

  What I'm doing wrong or is it a problem with the browsers themselves?

  / * Click here to go to the Web Page

  Click on the specified symbol instance loads the URL in a new browser window.

  Directions for use:

  1. replace http://www.adobe.com with the desired URL.

  Keep the quotation marks ("").

  */

  this.learnMore2.addEventListener ("click", fl_ClickToGoToWebPage_6);

  function fl_ClickToGoToWebPage_6() {}

  window.open ("http://www.google.com", "_blank");

  }

  / * Click here to go to the Web Page

  Click on the specified symbol instance loads the URL in a new browser window.

  Directions for use:

  1. replace http://www.adobe.com with the desired URL.

  Keep the quotation marks ("").

  */

  this.bookingRequest2.addEventListener ("click", fl_ClickToGoToWebPage_7);

  function fl_ClickToGoToWebPage_7() {}

  window.open ("http://www.apple.com", "_blank");

  }

  Gotcha now.

  I found this thread, can be to the address you are looking for.

  Flash html5 canvas opens several tabs when the animation loop

• problems with button with a sign works sometimes.

  Hi all

  I have problems with the + button at the top right. It "really hard to click the triangle! You tell me as the problem!

  Sorry for my English.

  Vito

  Hello

  simple, I had to hold down the button and do not click!

  By Vito

• Use in the different window buttons to quick launch

  I am new to Hp support forums, so please excuse the typos. I would like to know if it is possible to have iTunes running in the background and skip, play, and pause songs when I'm in another window for example. Firefox. I downloaded lastest drivers but it did nothing, my friend who has a dell XPS 16 is able to do. Any help would be greatly appreciated.

  Thanks Matt

  Hello

  Here is a link to a web of hp document that should help to understand the use of a configuration and programming of your laptop quick launch feature.

  Kind regards

  ERICO

• HP pavilion DV7-6c10so: cannot install HP Quick Launch on HP Pavilion DV7-6c10so

  I am really pulling my hair out on this one. Recently I swapped my brothers HARD drive into his laptop, and with that we decided to do a clean installation of windows. Evrything went smooth and well with the excavation and activate Windows. But I ran to a problem with the installation of some software and drivers HP. All drivers except 2 would install properly. Once, it was a hassel to install were the drivers Bluetooth and wi - fi. That's what happened when I tried to launch the exe to install:

  A window opens saying some information on im about to install software. I press next here.

  in the next step, I accept the EULA and press Next.

  Then begins the extraction process and once it has been done the window close.

  After this a windows installer window appears saying: preparing for installation...

  This was followed by: Please wait while Windows install configures the installation...

  During this stage, the progress bar fills upp to 100% and the window closes, and that's all. No message telling me the installation was a success or a failure. no error code or message. If I check the Device Manager I can be that the driver is not installed. I solved this problem by right-clicking on the device and then choose install driver and then find the extracted folder and choose the driver in there.

  But here's the tricky part and my problem, I need the software of quick launch buttons asswell but Installer is broken here as well. but since this isn't a driver I can't operate by itself.

  I let the Installer do its thing and all that with the drivers just sort of stops. No messagege not nothing. The program does not appear in the Control Panel, the task bar or in active processes (yes I restarted the computer). However I find it under Add/Remove programs in the Control Panel, so the computer thinks its installed. the same for HP software executives, but it is not as important.

  If I go to the extracted installation location I get a lage Setup window that says welcome to the quick launch HP Setup Wizard. Here, I choose to remove it ocr fix/repair it. I tried manny time to fix but I doesent help. I uninstalled and then installed using this installer manny thus times. Nothing helps. but atleasst with this installer, I get a quick launch of HP has been successfully installed message, yet it doesent work.

  what I tried:

  I installed each updates windows and .net.

  I tried to install an older version (for software farmeworks and quick launch).

  I reformatted and reinstalled the computer once again to see if the problem was caused by windows.

  go to the installation folder and run there (only for software frameworks).

  News of the computer:

  model: HP Pavilion DV7-6c10so

  Shipping os OS: Windows 7 Home premium x 64

  After reformatting operating system: Windows 7 Home Premium x 64

  I'm in the desperaste need to get this working because it's my brothers computer and it needs today to come back later and I said wrong I work just like before.

  Sorry for the bad English everybody!

  Hello

  In this case, it may be worth trying the following.

  Uninstall the current version QLB and restart.

  Download the version from the following link and save the installation program.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56929.exe

  Use software such as 7-Zip manually extract the contents of the Setup program, and then run the setup.exe routine (20 KB) as an administrator since the extraction folder.

  This can or can not give an indication that it completed - if not, leave it for 5 minutes, then restart.

  If it still does not work, check if the routines are present in C:\Program Files (x 86) \Hewlett-Packard\HP quick launch area and let me know - I'm going to work but to hope to be back within the hour.

  DP - K

• Pavilion Notebook PC 15-079er: problems with sleep and shutdown 15-n079er HP Pavilion Notebook PC.

  Hello world

  I have a huge problem with my Pavilion. I used Windows 8.1 earlier, and I decided to upgrade to Windows 10. I did not like something (can't remember what) and decided to return to Windows 8.1. Almost a year passed, I am again on Windows 10. But if I SLEEP my computer:

  • Screen goes black, everything seems normal.
  • No matter how long wait, fan keeps spinning and power LED, LED Wi - Fi on.
  • Keyboard input does not help. Does not meet what it is.
  • The only thing left to do - stop hard.

  And if I shut down the operating system:

  • Windows normally stops, close all applications, screen goes black.
  • Fan on, led on.

  I did not notice these problems with restarting and the hibernation.

  Two things I've done in this gap of the year:

  • Replacement screen. An old broke. Thanks to my cat...
  • Formatted the drive. I don't think it would do anything diffirent.

  So, any help would be appreciated.

  Thanks in advance,

  Kebab

  Hello

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• I'M HAVING A PROBLEM WITH MY OM NOISE AND ACOUSTICS MY PAVILION DV 7 PORTABLE

  I'M EDDIE ST. ROMAIN AND I HAVE a PAVILION DV7 CTO 6100 SERIES NOTEBOOK AND THE PRODUCT NUMBER IS QB648AV AND THE NUMBER of SERIES IS [personal information deleted] AND MY OS IS WINDOWS 7 64 BIT AND I AM HAVING a PROBLEM WITH THE SOUND AND AUDIO I NOTE THAT if I look AT THE VIDEO of NEWS OR I don't HAVE NO SOUND OR AAUDIO IT COME IN AND OUT AND BREAKING AND the AUDIO IS AS STATIC AND THE PICTURE IT START AND STOP AS IT AUTOMATICALLY PAUSE ON IT OWN WITH ON ME NOTHING I NOTICE TOUCH CELA THESE LAST TIME AND I'M ALL EARS ON THIS PROBLEM AND ALL SUPPORT IN WHICH I CAN GET OUT THIER FROME SOMEONE I'M LOST HERE TRYING TO UNDERSTAND THIS POINT IS WHAT THIER MAY BE SOMETHING WRONG WITH MY SYSTEM HERE OR MAY IT HAS SOMETHING TO DO WITH HAVING A DIAL-UP ACCESS BECAUSE IT IS WHAT I HAVE I AM OPEN TO ANY SUGGESTION TO THIER TO HELP ME GET THIS PROBLEM SOLVED ONCE AND FOR ALL AS SOON AS POSSIBLE I LOOK FORWARD TO HEARING FROME SOMEONE IN REGARS ABOUT THIS PLEASE. MR. EDDIE ST. ROMAIN

  Hello

  Please remove the serial number of the position since its considered to be personal information.

  Ru trying to watch the news online, if so, then yes its due to dial-up access.

  For videos (as in watching videos) streaming on the internet, you need a faster internet connection as a connection high speed.

  Try playing videos on the system as in the sample videos folder if it plays very well I suppose that the system should be fine.

• Problem with PCI-e slots on the S51200ZCTO Pavilion

  Hello.  I bought this computer for use as a media server, replacing a 3300Z failed two weeks ago.  One of its functions is my AV receiver Rs232 command  I bought an adapter cheap PCI-e series online and installed.  The machine refused to start with the card installed in one of the three locations.  Attached to the HP splash screen.  Decided that my card 12 was obvious junk, I went downtown and bought another card for $30.  Same question.

  What I did:

  Disabled all 3 PCIe x 1 slots and slot of the minimap.

  The machine will start with the card installed, but of course, it's kind of useless.

  I activated the slots selectively.

  The machine will fail to start whenever the first location is enabled and one of the two cards is installled.

  If the first location is disabled, I can activate only two and three slots and the machine starts correctly with each installed card.

  I installed each card in turn in slot 2 and enabled only the slot 2 in the bios.

  Windows 7 can not find two cards.

  I manually installed each card in turn.

  They have installed but shows an error code 10 (device cannot be started)

  I have about confcluded that there must be a motherboard problem.

  I am a very technical user.  I have been upgraded and now my own machines for about 25 years and I've never met this kind of problem with a simple installation device PnP.

  If anyone has any idea I will try it.  I'm not enjoying the thought of working my way through levels of support for HP to convince them that there is a real problem or to ship the computer for repairs.

  Thanks for the chipset, here is another card:

  http://www.Newegg.com/product/product.aspx?item=N82E16815124112

• Problem with button 'Load' and Boolean reset

  Hello...

  I've built a simple VI to load a file ascii with 100 values, split the file into 4 segments (overlap of 50%) and perform the calculation of the SUM of the segments. Each segment is represented by a graph and has a LED that, when is ON means that the segment will be used for the calculation of the SUM, when the LED is OFF this segment will not be used for the calculation.

  I have two problems:

  First: I inserted a button load and I need when I push the button, a window open and allowed me to select the ascii file to load, after that I analyzed segments and take note of the AMOUNT, I want to again press the Load button and load another file to analyze. The problem is that the works of load button only once, on the second file that I try to load, button freezes pushed and nothing happens and I need to stop the VI and run it again.

  Second: by default, I need that after I push the Load button to load another file ascii state that all the LEDS change STATE. In other words, by default all 4 LEDS should be lit when a new file is loaded.

  Thanks in advance

  Daniel

  
  

• Problem with button state

  Hello! I want to create a button with text. The State of the button should be the title of the text and the pointed State will be a paragraph with a rectangle in the background and the title disappears.

  I converted the title as button and I leave the paragraph text and draw the rectangle.

  My problem is when my mouse went hover title, nothing happened and when I went to move the paragraph box and rectangle, they seemed.

  Cannot choose the hover box? Can I create additional layers for rectangle and paragraph?

  The first time I try to create this button, he had run, but when I replace a bad shot.

  I'm working on the professional Flash CS6 and I use AS2. For example, I don't use THAT on my button, there is only 1 text converted to (title) button, 1 shape (rectangle) and 1 text (button).

  Fight with a button make me sick, if nursing Flash can cure my illness there will be great

  Good bye

  Tom

  If the invisible things in hover is the cause the invisible substance appears then looks that you have placed such things (text and background) under Hit of the button.  The image clicked sets where the button interaction can occur.   Make sure that you place only stationary flight controls in the frame over and no one else.

• Problems with button in AS3 in CS5

  I tried to get a simple button to work, but I am having trouble.

  How do you define the name of a button? I tried to put in the library as "button1" but my actionscript:

  Stop();

  Button1.addEventListener (MouseEvent.CLICK, advance);

  function advance(event:MouseEvent) {}

  gotoAndStop (5);

  }

  does not work; in fact, even the stop command does nothing and it does the trick of his five images.

  If I can replace "button1" 'stage' stop command functions, but then the button is not the trigger - clicking anywhere jumps to the frame 5.

  I think the problem I have is with the "button1.addEvent...". "line. I do not know how to connect my photo from the button with "button1".

  I called button1 and I tried to check "export for Actionscript and set button1 as the class, but none of this has worked.

  This problem might have to do with the fact that I'm not administrator on this computer?

  Drag your button from the library onto the stage.  in the properties panel, you can assign a name of "instance". for example, button1.   You can now reference this object in actionscript using button1.

  If your button is already on the boards, click it to select it.  then in the properties panel assign the name of the instance.