Problem with connection by using the single plan Authenicaton proposal application

Similar Questions

• Problem with smart updates using the WiFi, modem OK

  I started having problems with my WiFi on my Toshiba Satellite laptop.

  I can not access any program Smart Update - Windows, Norton, Spydoctor, inheritance etc..

  These Smart Update programs work very well if I'm connected to Dial-up but not wireless.

  I checked my Norton Firewall settings - doesn't seem to be an indication of a problem here.
  I disabled my firewall program - no change.
  I tried the drivers updated - no change.
  I uninstalled the other software spy/advertising programs and checked my registry - no change.

  My Internet is fine - I can always check email and browse websites - just the Smart Update function seems to be affected.

  I am running Vista and have updated and installed all the files system through my modem connection. I use Norton 360.

  Any suggestions?

  Concerning

  Lisa

  Hello

  The wireless internet connection seems to be ok if you can access the Web sites.
  So I think that the problem must be installed software or application.

  You use Norton 360?
  Although I know this software could affect the internet connection.
  See this Symantec support page:
  http://www.Symantec.com/Norton/support/selectproduct_ts.jsp

  There are some frequently asked questions about various issues with Vista, and Norton 360.

• Some problems with Toshiba 40LV933G using the Serbian language settings

  Hello

  I have Toshiba 40LV933g TV a few months already.
  The firmware version is finally a 1.00.08.
  And I have some problems with it, which I think can be corrected in some of the new firmwares (if there is one).

  First of all, when I select Serbian language 'Move' in media player is not translated.

  Secondly when I select the Serbian country in the menu I can't automatically scan for DTV and ATV ATV just of channels.

  Third and the greatest problem is medial Player do not support these last Serbian latin in subbtitles as:? šŠ?? žŽ
  and there is no possibility of changing the size of this last subbtitle. Things like this other brands are already supported.
  * also the time between changing channels is long enough *.

  Best regards.

  I noticed the same problem with subtitle on my TV Toshi when I use the media player (movie recorded on USB key). These Latin letters are not displayed correctly.

  I also hope that this can be corrected with new firmware.

  By the way: do you know where you can download the latest version of the firmware?

• Problems with signature while using the Application Builder

  So, I just went to create my application with applicationbuilder3.0 and I got this error. Anyone see this before? I went through the creation of p12s and files certificates and provisions three times now and it still does not work. I use the same e-mail address for all - so I have no idea how it would not match. Thanks in advance for any help!

  

  There is something wrong with your provisioning profile. Remove all the p12 and provisioning of the files that you have done as an attempt to get this working and then follow the steps in our guide publishing, starting on page 17, exactly: http://help.adobe.com/en_US/ppcompdoc/Adobe_Publishing_Companion_Guide_for_iPad.pdf.

  Neil

• Problem with microphone when using the speakerphone in 5.1.1

  During the call to anyone... When I press the speaker button to hear a louder voice microphone be cut always... even if I uncheck the speaker button!
  To speak normally without speaker... so, I have to end the call and start a second time to get the mic working!
  What is c?
  Please someone try and post it here...
  We need an update I think to fix this bug with mute mic!
  Please answer me.
  Thank you.

  Try a system repair using PC Companion as this will often fix questions - this will be factory reset your phone and erase all data so better to save before you start

  Turn off your phone and unplug the PC (Hold to increase the volume and power for 10 seconds)
  Start PC Companion and select the area of support then updated my phone/Tablet then blue fix my phone/Tablet and follow the instructions on the screen - when prompted connect your phone turned off always press and hold volume or back button - this should begin the process of repair or reformatting

  If you use Windows 8/8.1 or a 64-bit operating system and then adjust the settings for PC Companion and run in compatibility mode and choose Windows 7 or XP

• Problem with photosmart c4380 using the black cartridge XL

  Why my photosmart c4380 suddenly not recognize the Black XL cartridge which was working previously?  When I replace it with the previous cartridge (standard size), he seems to recognize and begins the process of allignment.  I have another XL cartridge, but at nearly £40 a go, I am reluctant to that that I'm already using waste AND another a new.  I get the warning message indicates that a cartridge is missing or not detected.  Anyone has any ideas please?

  I found it - I knew that it was there!

  This is a link to a youtube video that tells you how to do it.

  http://www.YouTube.com/watch?v=euzrPLMqDNc

  This sequence should be added at the end of the document that designates any person who responds to this request.  I don't understand why it is so difficult to find this answer? What can do this code? If the answer is not much, then surely its evidence suggesting people try to hp?

• problems with transient attributes using the Groovy Expressions on MySQL db

  Hello

  I m using jdev 11.1.2.4 and DB MySqll.

  Ive created the city and country of two tables.

  In the city of the table, there are foregin touch to amalgamate it at the table of the country.

  JDevelper have created associations and viewlinks of these paintings that I tested with ADF Model Tester and they are looking good.

  I created a transitional CountryName column and set the default (as Expression) Country1.CountryName.

  Now when I run the tester of ADF model once again, I get below error

  oracle.jbo.JboException: Houston-29000: Unexpected exception caught: java.lang.NullPointerException, msg = cannot get the "CountryName" null object property

  at oracle.jbo.ExprEval.internalEvaluateGroovyScript(ExprEval.java:1218)

  at oracle.jbo.ExprEval.doEvaluate(ExprEval.java:1253)

  at oracle.jbo.ExprEval.evaluateForRow(ExprEval.java:1075)

  any ideas?

  Thank you

  RESET query cache with RESET QUERY CACHE statement.

  http://dev.MySQL.com/doc/refman/5.0/en/query-cache-status-and-maintenance.html

  Clear the cache JDeveloper.

  Jdevloper clear cache and weblogic server

• Problem with activation by using the product key.

  Hey guys my computer came preinstalled windows 8. It will break the other day I update so I wouldn't lose all my flies. and now my product key was gone, it has not been activated more. I try to get online but nun does not work. n, now it tell me my activation will expire tomorrow can someone help me!

  MI buy slui.exe 4 has worked in Guyana... I have to call the number they give me...

  This laptop has been buying in new York.

  SAMSUNG NP300E5C

• problem update to bind a member with an attribute using the rule of load

  Hi - I'm trying to update an existing Member with another attribute of the dimension of the attribute by using a load rule. In the properties to build the dimension, I have the name of the selected member where it says size. Underneath, I field Type, here, I have the dimension of the selected and then attribute below I have the number 0, to match with the child member, I'm trying to update for.
  
  I am able to validate the rule, no problem, but when I run the update plan, my attributes for this member does not update. This happens to all of my attributes.
  
  I'm on Essbase 7.0.
  
  
  Thank you

  You should (at least) two columns in your rule of load. The first column with the names of members of the basic members you want to associate attributes to and in the second column of the attribute member name.
  If the dimension build properties for the first column, you set the name of the dimension and type of build level or generation (I suggest level) and set the number of levels. (Do not forget the dimension properties build to build level or you will get an error)
  The second column, select the dimension then go down and select the dimension of the attribute that is associated with this dimension of the base

  For example for the Basic sample, you may have a line that looks like

  100-10 can

  For the first column, you would select Dimension = product, value of Type level = 0
  The second column would Dimension = product Type = attribute dimension Pkg Type

  In the dimension settings, make sure product is set to build level and can associate attributes and allows you to change the link.

• I have problem with value NULL when the use CASE statement please help this question

  I have problem with value NULL when the use CASE statement please help this question

  
  

  Table: digital_val

  SNO cl C2

  1 San1 11

  2 22 San2

  Actual result: expected to A         B

  A            B                                                                           11        22

  11 NULL

  22 NULL

  
  

  
  

  query:

  Select case when c1 = "san1" then c2,.

  case If c1 = "san2" then c2 B

  of digital_val

  I'm more curious why, when you select 2 rows, you expect a result of row?

  WITH digital_val

  AS (SELECT 1 AS 'Sno', 'San1"C1, c2 FROM DUAL 11)

  UNION ALL

  2 SELECT AS 'Sno', 'San2"C1, c2 FROM DUAL 22)

  SELECT CASE WHEN c1 is "San1" THEN END AS A c2.

  CASE WHEN c1 = "San2" THEN END AS B c2

  OF digital_val;

  With no other input, if you select 2 rows, you get 2 rows.  One of the other solutions use a max function, but is this really what you want, does not specify?

• I'm having a problem with my dropper / use pencil. I click on the color I want, but when I use the pencil or the brush is a contrasting color. I don't know if my photoshop is damaged, or if I changed some setting by mistake.

  I'm having a problem with my dropper / use pencil. I click on the color I want, but when I use the pencil or the brush is a contrasting color. I don't know if my photoshop is damaged, or if I changed some setting by mistake.

  Check if your pencil/brush painting Mode, or the layer is another than Normal.  For example, you will get the contrasting color, if the Mode is the difference or Exclusion.

• Problem with Windows Update after the new installation of Windows 7 Pro the Lenovo ThinkPad X 200

  I'm trying to do a fresh install of Windows 7 Pro on a Lenovo ThinkPad X 200. The product key is easy to find on the sticker of the ThinkPad. However, the version of Windows is hidden (for example, I can't check that my ThinkPad had originally installed Windows 7 Pro). I was able to install by using a Pro Win 7 SP1 CD ROM I bought for another installation. I used the ThinkPad I was trying to make the new facility on the product key. I was able to activate the Windows 7 Pro using the phone call and my cell phone. I checked the activation! However, I have problems with Windows update. The product key may be a different version of Windows 7. If so, why did it install and activate OK? Y at - it a fix for this problem or I have to buy a new version of Windows 7 Pro? Please note that I have not yet installed all drivers Lenovo ThinkPad as I can't seem to install correctly. Thank you!

  Since the issue is updated to Windows, it is not a product number key.

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

• Win7 always tries to connect by using the default profile for the Native WIFI

  Win7 always tries to connect by using the default profile for the Native WIFI
  I defined a new WIFI profile for my home WIFI network. I use a USB of NETGEAR WNA1100 adapter. The profile is configured to connect automatically. I also moved over the default profile for the Native WIFI. Win7 always tries to connect to the default Native WIFI profile and not the profile that I created. Also, when I restart Win7, the default profile for the native WIFI moves to the top of the Profiles list. Also, when I try to change the default Native WIFI profile to use security WPA2 - PSK (AES) instead of WEP, it allows me to make changes, but he comes back to WEP after it treats changes and attempts to connect to the network. How can I fix so that Win7 will use my profile to connect to my home WIFI network and not the Native WIFI as the default profile. Win7 still connect using the default profile of NativeWIFI despite installing a different profile in Control Panel 'Wireless Networks '. I know that I can edit this profile by default, but anyone know how tell Win7 to use a different profile than the default? I tried to change the positions of the profile so that I want to use is facing up, but no, still uses the default. If I try to remove it, it comes back.
  After removing the two profiles and adding the profile for my home network, Win7 automatically added the default profile for the return NativeWIFI. My profile is configured to automatically connect to the network using WPA2 - PSK (AES) security and the default profile for the NativeWIFI (use WEP security) is the Win7 Setup to manually connect. Also, Win7 puts the default profile for the NativeWIFI above my profile. Also, when I delete the profile by default the NativeWIFI, Win7 it always puts back and he goes over my profile. This is starting to resemble the Win7 manage wireless mechanism for allowing users to add and prioritize the profiles of school boards does not work. Here's another thing that happens: when I try to change the security for the profile default of NativeWIFI to WPA2 - PSK (AES) of WEP, Win7 allows me to make changes, but it is up to the WEP after it processes the changes and tries to connect to the network. This seems too much for me, it's a problem with Win7. If I could do this job, so I need not to set up a second profile.
  The adapter I use a NETGEAR WNA1100 works correctly and I use it without any problem. I have is with Win7 and the interface to 'manage wireless networks '. It will not honor the fact that the WIFI profile that I created for my home network must be connected to automatically I installed. He always wants to connect to the default profile NativeWIFI even if I set up my home network profile to connect automatically. I can do a manual connection for my home network without problem. It seems to me that it is a question of Win7.
  Kind regards
  QRP

  Thank you very much - Netgear seems to have finally accepted as the default network!  If all goes well it will stay like this

  MAS

• Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Hi Jer9009,

  Welcome to the Microsoft answers site.

  ·         Could you give the exact error code or error number you get?

  To connect multiple computers, install a network adapter in each and run a network CAT5 cabling to connect each one to a hub (and thus the other.) The computer that will serve as a transition will have a standard network card for wired and a wireless network adapter that will connect to the wireless (WAP) access point or gateway on the second network.

  A network bridge is software or hardware that connects two networks or more so that they can communicate. You can create only a single bridge network on a computer, but a bridge can handle any number of network connections.

  For more information, see the link: create a network bridge:http://windows.microsoft.com/en-US/windows-vista/Create-a-network-bridge

  Add a connection to a network bridge: http://windows.microsoft.com/en-us/windows-vista/Add-a-connection-to-a-network-bridge

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm having a problem with a sound used for Norton ccSvcHst.exe process. And perhaps dwm.exe

  I'm having a problem with a sound used for Norton ccSvcHst.exe process. I have all the dates of the last mounted and I roughly 1 000 000 errors page an hour and the hard drive of my computer is crazy with me doing nothing. Norton has been included in the software package supplied with the computer. so I hope that support you. What can I do to calm my computer runs to stop this service... I have also about 500 000 for the service dwm.exe. What could cause this?

  Hi dude, on average

  A. from when what happens?

  B. recent changes made on your computer?

  C. you get any error message?

  First of all, I suggest you to uninstall and reinstall Norton using the Norton Utilities disk and check if the problem persists.

  Second, you may have to perform an auditor of the system files on your computer in order to replace the files corrupted on your computer.

  Open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  Type the following command and press ENTER: sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Bindu S - Microsoft Support
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]