leaving unwanted pc to a newer pc xp?

Similar Questions

• Adjustment brush without leaving a PIN for each new setting

  I use Lr6/CC 2015. It was working fine but now won't let a PIN for each new setting. I think the software is corrupted.

  Can I just uninstall and then reinstall. Uninstall removes my catalogue or whatever it is another important? Is it safe to do?

  Press H

• leave the animation to a new web page (using the file .oam Edge in MUSE)

  Hello

  Ok. Here's the situation. I have a Web page that was made in MUSE, on this page, there is a click of the mouse button that starts an animation on board.

  Once the animation is completed, I want a (automatic) action that displays a new Web page on the same website.

  I tried implementing a "timeline stop" action on the main stage

  window.open ("http://homie0106.businesscatalyst.com/menu-1.html");

  No dice. Any ideas?

  Thanks in advance

  Bob

  I have it.  The method I posted worked there... once I corrected my mistake of hyperlinking.

• New iPad Pro - implement Q

  I have a new IPad Pro and I backup my old ipad on the cloud, but there are a lot of pictures there that I don't want on the new. How do I just get paid for applications and the things I want on the new ipad?

  The backup is virtually all or nothing. The only way to choose what to back up is if you were to delete unwanted photos out of your old device, then back up, and then restore your other from the newly formed backup.

  Or you can simply find out that you need to remove unwanted things on your new device.

• Why disable common features and hide completely to use a new version of firefox

  When a new version of Firefox comes out the end, all to often when there new features or a programmer has a different idea of what they like from the previous version, the features are enabled by default and things are rearranged without any choice by the user. A concrete example is that when I installed Firefox 24 on my wife's computer he disabled the menu bar and put the tabs on top. To add insult to injury, there is no settings option to put the hind below! I do not how much someone loves the tabs on the top, the right way to handle these kinds of feature upgrades is to leave everything as it was in terms of parameters and display a web page that contains a button that says what each change with a Yes and no button so that the user can try if they want TO or not , and not just say (effectively) "we are the Lords and ask you to use this and we know better. If this method is too difficult then just don't change the settings and leave a page "what's new". I know it is free SW and contribute many dedicated, but to do your darnedest to confuse or annoy your users is not the way to do it. Imagine if you took your car to have a new mounted radio and when you got the brake pedal was in the backseat and the guy said "we like better that way.

  BTW, to have the tabs just above the web pages you are watching way makes more sense to have the 3 lines now.

  Hello

  Most people answer on the support forum is volunteers of Mozilla (including me) so we are not able to comment on that kind of decision. We are not involved in choosing how new versions are gone.

  The best place to make a comeback would be this page:

  https://input.Mozilla.org/en-GB/feedback

  If you want to make Firefox v24 v3 looks like, then you can use a theme such as Firefox 3 theme.

  See also here for more information: https://support.mozilla.org/en-US/questions/895542

  I hope this helps. Let me know if not.

• I synchronized prior wih a 4 Apple and got an Apple 4 s, and I can not sync more or retrieve the original Info? When I try to start a new synchronization it won't accept my email > HELP!

  As I've said before that I can not synchronize when I changed my mobile phone to Apple 4 4 s Apple, sync menu leaves me not to start new or will give me the necessary info to change phones

  It seems that you have not set up Firefox Sync on your computer. You should start from there.

  If you forget your recovery key make sure you read this article first: I lost my account Firefox Sync - what to do information

  After that, follow the rest of the steps explained here: [https://support.mozilla.org/en-US/kb/How%20to%20set%20up%20Firefox%20Home...]

• New Partition under Vista

  How to make the New Partition of existing partition in windows vista home edition?

  How to make the extended partition?

  Hi Nicole,.

  Thanks for posting answers.microsoft.com

  My understanding of your message, it is that you are willing to REDUCE your current Partition to make a new partition of space it is?  I want a full clarification before provide you specific instructions of what you're trying to do, so I won't give you instructions on something different then exactly what you expect.
  If this is correct;

  Here are the steps on how to go about the reduction of your current partition and then create a new partition in the space that became available after the reduction of this partition.

  1. Make a good backup of your system on an external device.

  (Click on key E - made Windows right click on the drive you want to save and select Properties, in the tab tool select BACKUP now - follow the Backup Wizard to back up your files to an external device).

  1. Make a point of good your system restore if you need to send back to him at any time after this process.

  Once backup/restore point in place, we can start working on the reduction of the volume, and then if you want new partition creation.

  Click on start ORB / right click on computer and select manage / disk management module, you can find the disk that contains the partition in the gray box at the bottom of the window.

  Right click on the partition and select Shrink Volume / he'll consider available disk space, and then submit the size of available shrink the partition by.  Then in the field, it will provide for type the amount you want to shrink the partition of the space.

  In the example, the size of available free 21525 MB of space / enter the amount to shrink in MB ___mb.

  Once you have entered the amount you want to reduce the volume by, select SHRINK.

  It will take a while so he can shrink this partition, and when that happens, it will leave you can do a new partition on the UNALLOCATED SPACE.

  To make the new partition to the UNALLOCATED SPACE, right-click on this space and select NEW SIMPLE VOLUME.  Follow the wizard to create the size of the partition, drive letter, FORMAT VOLUME until the process is complete.

  Please let us know if this information was useful or if additional information is required.

  Thank you

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Avoiding the new line, import csv

  Hi friends,

  Importing csv into a temporary table file, stored in csv is divided into two rows due to "an undesirable character" or the new line.

  Here is the example when I copy the unique line of csv, and while the display becomes two lines in Notepad.

  ' 70555129360 ',' December 10, 2014 23:51:34 ","11 December 14"," Tag #: 4708511.

  Sharjah - 50253 2', 'Al Barsha', 'Abu Dhabi', '0.00 '.

  You can find the unwanted character or a new line in the image. No way to avoid this, importing temporary table or can we adhere as data records.

  Select * from test where instr(test_value,'"',1,1) = 1;

  Select * from test instr(test_value,'"',1,1) <>1;

  Finally, we can reach above two sets with the first line of the first query with the first line with the second query. your suggestion pls.

  use utl_file.get_line (in_file, lineread);

  in_file utl_file.file_type;

  lineread varchar2 (4000);

  Thank you.

  Actually, I had an idea like, given that the single line divides into two lines in the table.

  I'll do three temporary table for some data.

  ' 70555129360 ',' December 10, 2014 23:51:34 ","11 December 14"," Tag #: 4708511.

  Sharjah - 50253 2', 'Al Barsha', 'Abu Dhabi', '0.00 '.

  1. first one like that with the column one id.

  Select * from test where instr(test_value,'"',1,1) = 1;

  Id	test_value
  1	"raju, mohan.
  2	"like, dikes.
  3	"play, while".
  4	"all right, mine.

  2. the second one like this with one ID column

  Select * from test instr(test_value,'"',1,1) <> 1.

  id	test_value
  1	rain, rain ".
  2	chain, wain.
  3	Why not ".
  4	"all, well done.

  and finally

  3. third from combine records where id matches.

• Bad video card - last ditch effort

  Hello

  I'm 99% sure this is my video card that is causing this problem.

  Started a few days ago the screen filled with red pixels randomly, it could get worse over the next few minutes, and then the computer was completely insensitive - had stopped the clock and the mouse does not work yet.  I was able to ssh from my laptop, but cannot open applications and reboot via ssh wouldn't work, had to hard - reboot.  After having let it sit for awhile, it seemed better, I was hoping it was a stroke of luck.  Just right tonight (a few days since the accident of 1), he began acting again... bad.  I tried to run the Apple Hardware Test, he could not even done that - she's blocked (at the forefront in the screenshot), the mouse still worked, but even after half an hour, neither the time nor progress bar update.

  I have a NVIDIA Quadro graphics card, I'm not sure that is because apparently they only give information on the card itself.  I know that it was very expensive.  Tomorrow I'll try cleaning all the contacts on the map and the location of the motherboard.  Beyond that, all I can think to do is to buy a new video card.  Is it possible to fix a video card, or is it simply not feasible?  I can also try to put it in another location, to see if that solves (which would indicate that the problem is on the motherboard, rather than the map, but I doubt that will solve it).

  I removed the video card all together, the system is not is more locked up (so far), I am able to use via my MacBook screen sharing, and everything seems good function... which pretty much confirms for me, it's the video card (or slot) that's the problem.

  Does anyone have suggestions until I leave shell $500 on a new video card?  This expenditure could not have come at a worse time...

  I don't think I need anything too serious for a video card, I use Final Cut Pro.  I installed also just Apple Motion (literally, one day before all this crap started to happen, it seems strange that it could be related, but the time is quite a coincidence), and I join with two dual-link DVI ports.  I'd be curious to know if anyone has recommendations what video card to buy.

  Thanks in advance for any advice or thoughts.

  

  http://Lifehacker.com/5823227/save-dying-video-cards-with-a-quick-bake-in-the-OV en

• Watch and iPhone both show connected but still not able to communicate

  I have a very frustrating problem with my Apple Watch. She is often unable to communicate with my iPhone. The App shows My is the first to show signs of distress. If I try to check for software updates it swill of the delay and say "unable to verify the update. When this happens, I am also unable to enter the password setting in My Watch. Ping of the watch thinks it works but the phone does not make a noise. As time passes more functions cease to function as notifications and incoming phone calls stop posting on the watch. However, watchmaking and the phone show that it is paired and connected. I tried all combinations of restart the phone and watch. I have disable-paired/repaired the watch several times. I restored it as a watch again after that restore the backups did not help. I restored the phone also leave a backup and like new. Whenever the Watch works fine for a day or two and then starts failing the same way. The watch was Christmas present last year, he almost 8 months and never had this problem until the last two weeks after the last iOS updated to 9.3.3. Help!

  Did you use the steps in this article If your Apple Watch is not connected to your iPhone - Apple support

• Why do export cover research book, it only does the titles?

  I need to transfer my address book from one computer to another, the two v38.2.0 of Thunderbird running. I go to the address book and tools > export. It only gives me the possibility of the fields to export. Any other file type I use (.csv, etc.) that it exports only the file headers, not the names and e-mail addresses. Looking at the Mozilla support forum looks like it worked OK in the past for other people. Is this a new problem with this version of Thunderbird, or is there something else I should have done before attempting to export? I tried editing > select all, but it was no help either. I don't want to type more than 100 names and emails!

  You choose an address book or leave you on the all new books?
  You select the address book for the export.

• I can't disable session restore.

  No matter what setting I put in the Options window, when I leave and then start a new session in previous FF always appears regardless of the setting. All I want is my home page as usual. Its done this for about 2 weeks or more. Its so annoying. Help.

  It worked. Thank you guys.

• Improved connected IPad Windows10 private WiFi network w/AirPrint printer. Bluetooth is disabled. Try to print an e-mail, the IPad can't see printer. Android phone works wirelessly with the printer.

  IPad on the same wireless network private Wi ' Fi as computer windows 10, Android phone and Samsung printer airprint. Blue tooth is disabled. Can I wireless print with Android mobile phone, but not with the IPad... suggestions.

  Have you tried to reboot your router? Unplug it, count to 10, plug back in and let it boot and see if she sees the printer now. You might also want to disconnect/reconnect your printer, leave everything to make a new connection.

  You can also force your iPad to restart. Hold down the button sleep and home for about 20 seconds. When you see the silver Apple, let go and let it restart.

• Default configuration updates/changes...hang

  Hello

  I come here with a difficult problem... I have a Probook s 4740. It comes preinstalled with Windows 8 and HP security tools. Recently, I decided to upgrade to 8.1 Windows and for that I had to uninstall HP security tools. I did the uninstall and update of Windows. After a day of using the computer hang. I have updated using HP recovery. As the version of the OS was old he himself day after a day or two. The update went well. After starting windows the next day he started the configuration of updates. Something went wrong and it failed with: "Failure of windows configuration updates from reinstatement of changes". She suspended and never finished. I've refreshed believe once again that it does not refresh correctly. All of this happens again. After updating once again, then whole reinstallation of windows, the problem persists. At this point, I updated the computer 4 times and reinstalled Windows 1 hour. I tried to disable all the services non-windows and update according to the guidelines of this forum: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/Failure-configuring-Windows-upd, but it did not work. It failed with: "default configuration changes in windows. Changes in return ".

  What should I do? My laptop is still under warranty of extednded. Can I make a soft/hard reset or take my computer of sevice? I hope I can solve this on my own as being without my cell phone would be very inconvinient. Other solutions? If you need further information please tell.

  HP Probook 4740 s

  Product number: H5K32EA #BED

  OS: Windows 8 pro 64-bit

  Best regards, Tony.

  Use the HP recovery media to access the Microsoftsystem to restore and then choose a restore point dated before the update of events that caused the stroke.

  

  Note the number of the update and make sure that you leave not only one install new. You can do that by changing the update of Windows settings from install automatically to informez me update availability, but let me decide to download and install updates.

• HP Compaq 8510w - wifi problem

  Hello

  I have a laptop HP Compaq 8510w running on W8.1.

  On the support site, I can't download drivers for W8.1, but the laptop is too good and too quick to replace.

  However, I constantly loose connection wifi. Device Manager contains the following description of the device:

  Intel (R) Wireless WiFi Link 4965AGN

  • This could be a driver problem or is this a hardware problem?
  • If it is a hardware problem, you can easily replace the wifi component?

  Thanks in advance,

  SJW

  P.S. when I leave W8.1 get a new driver in Device Manager, it says that the driver is up-to-date.

  Hello:

  You can try the drivers on the link below to W8.1 and see if that helps...

  http://www.Intel.com/support/wireless/wtech/PROSet-WS/sb/CS-034041.htm

  You have the best wireless HP offered at the time, so replacement will not be a map option.

  BIOS locked maps wireless not supported.