Problem with microphone when using the speakerphone in 5.1.1

Similar Questions

• Re: Problems with Microphone when I use Skype

  Could anyone help with the problems I am experiencing with the microphone when using Skype?
  I also tried to use an external, but still problems with the other person can't hear me, y at - it a setting I can adjust its been to Toshiba and they said that there is no fault.

  Any help would be appreciated.

  In fact internal mic works well with Skype.
  All you need to do is enter the sound options of Skype and check the settings there especially if you use the headset.
  Play around with these settings.

• Having a problem with artifacts when using Dip to black transition

  I use Adobe first Pro CC on a Dell XPS 8900 with a NVIDIA® GeForce® GTX 745 4 GB of DDR3 memory. Both in the Editor (with all the rendering) and the final video (which I tried to export in several ways), I get artifacts when using the two Dip to black and chained transitions. I did check the sequence settings to match the original film, as I originally had two cameras (ARRI and XDCAM) images. I get the problem on two types of sequences. I tried to convert the original film in .mp4 using a HD video converter and then re-import it. The problem remains. Then I tried to download sequences of archives on the Adobe site and imported. And I still have the problem. I think that it has something to do with my computer as before to get the XPS 8900 I had used an older Dell model (without graphics acceleration or upgrade) and had not not this problem. You can see artifacts in the video below. Strangely, I don't see any artifacts when I used transitions on the titles of lower third or in transitions from outset between title sequences. It is only when transitions are used on real images (and, again, I tried to use other types of sequences and had the same problem). Any thoughts on how to solve this problem would be greatly appreciated.

  I am simply not see something weird.  The transition is quite fast, however.

  Give that DNxHD export/upload to try.  See if you like better.

• Some problems with Toshiba 40LV933G using the Serbian language settings

  Hello

  I have Toshiba 40LV933g TV a few months already.
  The firmware version is finally a 1.00.08.
  And I have some problems with it, which I think can be corrected in some of the new firmwares (if there is one).

  First of all, when I select Serbian language 'Move' in media player is not translated.

  Secondly when I select the Serbian country in the menu I can't automatically scan for DTV and ATV ATV just of channels.

  Third and the greatest problem is medial Player do not support these last Serbian latin in subbtitles as:? šŠ?? žŽ
  and there is no possibility of changing the size of this last subbtitle. Things like this other brands are already supported.
  * also the time between changing channels is long enough *.

  Best regards.

  I noticed the same problem with subtitle on my TV Toshi when I use the media player (movie recorded on USB key). These Latin letters are not displayed correctly.

  I also hope that this can be corrected with new firmware.

  By the way: do you know where you can download the latest version of the firmware?

• Problems with keywords when using 2 directories.

  Pardon my french, I'm Norwegian... ;-)

  I LR3.6 and have a folder structure I am satisfied, I also use keywords on the images.

  Je want a Directory with B /W and an color, in order to work in a directory where only B/W images. I think that itis easier to see the images that work B/w this way...

  J’ai copied the LRCAT file into a new file. When I opened LR I chose the directory to load, B/W or Color. It works OK. When importing new photos I copy images in the desired Directory (for example. Color?) with the failure of development parameters. When I Use the directory of b/w Synchronize the color directory with the black and white default develop settings.

  I imported the same list of key words in the two directories, but the problem , it's that the the key words are not included on all when I sync. The images have the same file name so it should be possible to retrieve / Sync Keywords so?

  Is he is at - it who can help mebe, either with another solution where didn't need 2 directories or how I can import of keywords to another Directory?

  Rather than having the same files stored in two catalogs, you should have to do this as "virtual copy" in the same catalog.

  Now, to sort. To make the backup copies of these two catalogs, then use the file > import from another catalog and check the option create new virtual copies. Then import - make sure you add is selected and not copy or move. We should end up with the two B & W and executions as well as virtual color copies.

• Problems with mappings when changing the type of source table field?

  Hello world
  
  one question.
  Is it a problem when I change my types of fields in my table of source of char for example varchar2 with mapping that uses this table?
  In the mapping of the source table field Types are defined as Char fields. Do I have to change all the fields of char to varchar2 (via Import again from the source table and synchronize in the map)?
  
  Thanks in advance.
  
  Greetings

  Hello

  If your new data type (in the database is compatible and big enough) then you probably don't have to change the class in your other mapping wise you need.

  It a good practice to import the last definition of table (metadata) in the repository of OWB and then synchronize incoming.

  Thank you
  Fati

• Problem with smart updates using the WiFi, modem OK

  I started having problems with my WiFi on my Toshiba Satellite laptop.

  I can not access any program Smart Update - Windows, Norton, Spydoctor, inheritance etc..

  These Smart Update programs work very well if I'm connected to Dial-up but not wireless.

  I checked my Norton Firewall settings - doesn't seem to be an indication of a problem here.
  I disabled my firewall program - no change.
  I tried the drivers updated - no change.
  I uninstalled the other software spy/advertising programs and checked my registry - no change.

  My Internet is fine - I can always check email and browse websites - just the Smart Update function seems to be affected.

  I am running Vista and have updated and installed all the files system through my modem connection. I use Norton 360.

  Any suggestions?

  Concerning

  Lisa

  Hello

  The wireless internet connection seems to be ok if you can access the Web sites.
  So I think that the problem must be installed software or application.

  You use Norton 360?
  Although I know this software could affect the internet connection.
  See this Symantec support page:
  http://www.Symantec.com/Norton/support/selectproduct_ts.jsp

  There are some frequently asked questions about various issues with Vista, and Norton 360.

• Problem with flight when using no call blocking

  Hello
  
  I have a scenario in which I need to call a service several times based on header lines. I used the following approach to reduce the execution time:
  
  1. use flight with "n" being the no. lines in the header.
  2 call the service inside the flow with nonBlockingInvoke set to true for the PL. The assignment of the var of entry for the service takes place inside of flight activity.
  
  The problem with this approach is that the assignment happens correctly. for example. LineId1 is assigned to the service entrance in the first stream, LineId2 the second rate and so more..., but in the used input variable values by invoke remains constant in the first mission that produced the first stream Viz LineId1 will be happened as an input for all activities of other flows, despite the copy in entitled operation happening properly.
  
  Can anyone share some thoughts on this?
  
  Kind regards
  Sandeep

  Hi Sandeep,

  I think the mistake you make is that the defined variable to call the service endpoint (i.e. the input of the invoke activity variable) should not be a global variable, but instead should be defined as a local variable in the scope that contains the activity of flight.

  Concerning
  AYUSH

• Problems with signature while using the Application Builder

  So, I just went to create my application with applicationbuilder3.0 and I got this error. Anyone see this before? I went through the creation of p12s and files certificates and provisions three times now and it still does not work. I use the same e-mail address for all - so I have no idea how it would not match. Thanks in advance for any help!

  

  There is something wrong with your provisioning profile. Remove all the p12 and provisioning of the files that you have done as an attempt to get this working and then follow the steps in our guide publishing, starting on page 17, exactly: http://help.adobe.com/en_US/ppcompdoc/Adobe_Publishing_Companion_Guide_for_iPad.pdf.

  Neil

• Problem with photosmart c4380 using the black cartridge XL

  Why my photosmart c4380 suddenly not recognize the Black XL cartridge which was working previously?  When I replace it with the previous cartridge (standard size), he seems to recognize and begins the process of allignment.  I have another XL cartridge, but at nearly £40 a go, I am reluctant to that that I'm already using waste AND another a new.  I get the warning message indicates that a cartridge is missing or not detected.  Anyone has any ideas please?

  I found it - I knew that it was there!

  This is a link to a youtube video that tells you how to do it.

  http://www.YouTube.com/watch?v=euzrPLMqDNc

  This sequence should be added at the end of the document that designates any person who responds to this request.  I don't understand why it is so difficult to find this answer? What can do this code? If the answer is not much, then surely its evidence suggesting people try to hp?

• problems with transient attributes using the Groovy Expressions on MySQL db

  Hello

  I m using jdev 11.1.2.4 and DB MySqll.

  Ive created the city and country of two tables.

  In the city of the table, there are foregin touch to amalgamate it at the table of the country.

  JDevelper have created associations and viewlinks of these paintings that I tested with ADF Model Tester and they are looking good.

  I created a transitional CountryName column and set the default (as Expression) Country1.CountryName.

  Now when I run the tester of ADF model once again, I get below error

  oracle.jbo.JboException: Houston-29000: Unexpected exception caught: java.lang.NullPointerException, msg = cannot get the "CountryName" null object property

  at oracle.jbo.ExprEval.internalEvaluateGroovyScript(ExprEval.java:1218)

  at oracle.jbo.ExprEval.doEvaluate(ExprEval.java:1253)

  at oracle.jbo.ExprEval.evaluateForRow(ExprEval.java:1075)

  any ideas?

  Thank you

  RESET query cache with RESET QUERY CACHE statement.

  http://dev.MySQL.com/doc/refman/5.0/en/query-cache-status-and-maintenance.html

  Clear the cache JDeveloper.

  Jdevloper clear cache and weblogic server

• Problem with connection by using the single plan Authenicaton proposal application

  Hello, I am Avinash,
  I have two applications in a single schema, and I use customize the connection authentication scheme in both applications. I want to go from one application to another application, I gave a link to this request, when I click on this link, it asks for the connection again that users of these two applications are the same.
  Is it possible to connect with diagram of an application authentication and use sitting in application?
  
  Thanks and greetings
  Avinash.

  Hi avinash,

  I will answer just because I already had in my application. Details internal cookies and their implementation can easily find the net. Pls read it online, there are a lot of resources to do this.

  If my help worked you ask out, I'm really happy for her. Please close this thread in the landmark useful or response

  Happy coding,
  Sunil Bhatia

• Problem with MessageRadioButton when using PPR on this event.

  Hello
  
  I have a requirement where there is two MessageRadioButton
  
  When the 1 MessageRadioButton is selected an element must be mandatory and
  
  When the 2nd MessageRadioButton is selected another point should be mandatory.
  
  The problem I am facing is when I select the 2nd element and going back to select article 1 the selection does not change.
  
  Can someone help me how can I solve this problem
  
  
  Krishna

  Krishna

  In addition to what you've done by program don't forget to set its value unchecked two option buttons.

  Thank you
  AJ

• Problem with activation by using the product key.

  Hey guys my computer came preinstalled windows 8. It will break the other day I update so I wouldn't lose all my flies. and now my product key was gone, it has not been activated more. I try to get online but nun does not work. n, now it tell me my activation will expire tomorrow can someone help me!

  MI buy slui.exe 4 has worked in Guyana... I have to call the number they give me...

  This laptop has been buying in new York.

  SAMSUNG NP300E5C

• I'm having a problem with my dropper / use pencil. I click on the color I want, but when I use the pencil or the brush is a contrasting color. I don't know if my photoshop is damaged, or if I changed some setting by mistake.

  I'm having a problem with my dropper / use pencil. I click on the color I want, but when I use the pencil or the brush is a contrasting color. I don't know if my photoshop is damaged, or if I changed some setting by mistake.

  Check if your pencil/brush painting Mode, or the layer is another than Normal.  For example, you will get the contrasting color, if the Mode is the difference or Exclusion.