Problem with copying of the contents of one database to another table

Similar Questions

• Need some ideas on the copy of the data from one schema to another.

  Dear all,
  
  I would like to know the best method and possible by copying data from one schema to another. (I won't use EXP / IMP).
  Example:
  
  
  I have a scheme of production on which I have hundreds of tables. I copy the data of the TEST environment after comparing data, I should copy the data incrementally.
  Maybe this copy of data may occur once a month, or on request.
  
  I want to have this done by a procedure.
  I was thinking about the logic below, using a procedure I will compare the tables and the structures between the two schemas.
  Then I willl use the primary key in both tables column and compare the data first. If the data if it does not exist then I only inserts these records in the target.
  The above said logic could be as similar as the synchronization of data or records, but the table does not all columns to track records archived / copied from the source.
  Suggest me so if you can give me the best logic or solution.
  
  Thanks in advance...
  
  Concerning
  Suresh

  GSKumar wrote:
  Dear all,

  I would like to know the best method and possible by copying data from one schema to another. (I won't use EXP / IMP).
  Example:
  I have a scheme of production on which I have hundreds of tables. I copy the data of the TEST environment after comparing data, I should copy the data incrementally.
  Maybe this copy of data may occur once a month, or on request.

  I want to have this done by a procedure.
  I was thinking about the logic below, using a procedure I will compare the tables and the structures between the two schemas.
  Then I willl use the primary key in both tables column and compare the data first. If the data if it does not exist then I only inserts these records in the target.
  The above said logic could be as similar as the synchronization of data or records, but the table does not all columns to track records archived / copied from the source.
  Suggest me so if you can give me the best logic or solution.

  I don't know why you don't want to opt for EXP/IMP.
  As an alternative, if you have a link DB between Production and Test pattern (which I seriously doubt), you can use the MERGER to a copy of data from Production to Test Delta.
  a. INTRODUCE IN test_schema.table_name SELECT sequence_columns, column_list FROM (SELECT column_list FROM prod_schema.table_name LESS SELECT column_list from test_schema.table_name)
  Column_list must not contain columns that contain sequence values because they may differ and result in an incorrect result; Therefore, this is taken into account in the outer query rather than Inline mode.
  b. MERGE STATEMENT
  c. FALL of test_schema.table_name. CREATE test_schema.table_name as SELECT column_list from prod_schema.table_name; -A way very neat to copy all the data, provided you do not keep any changes to test the tables in the schema.

  However, you mentioned to find existing records based on the primary key; IMO, primary key is normally a sequence (may be alphanumeric) and its value on env Production and Test may defer or even can have different attributes, therefore, I find it incorrect to match only the primary keys. I would say to match the key attributes.

  If you want to follow the last update/insert for a record, you can add a column that puts the time of last modification. In this way, you can track the changes of a column. Another alternative would be to use a check to the table.

  Let us know your thoughts or concerns, so that help can be provided.

  I suggest that you read and follow {message identifier: = 9360002}.
  If you will be useful if you can provide all the information required in advance to help us provide you with a quick resolution.

• Problem with image extract the content and the tile at the same time show on ListField

  My application is Application News get JSON webservice to appear on ListField.

  On each line in the list, it will show you the image thumbnail, title and Teaser as below.

  _______________________________________

  |                |                       Title

  |   Thumb  |_______________________________

  |_______  |                       Teaser

  First of all, I have to get JSON that contains the url of the thumbnail image, title and Teaser.

  
  

  I managed to view the title and Teaser, but the thumbnail is not. When I Fetch image with the url of the thumbnail image, it returns only bitmap = null for me.

  My method is first call httpdispatcher to get the thumbnail image, title and Teaser and then wait and call another httpdispatcher to retrieve the url of the image thumbnail, then added to listfield.

  Here is my code

  Class helloScreen{
  
  public void requestSucceeded(byte[] result, String contentType)   {      if (contentType.equals("image/png") ||        contentType.equals("image/jpeg") || contentType.equals("image/gif") ||contentType.equals("image/jpg")) {         bitmap_temp = Bitmap.createBitmapFromBytes(result, 0, result.length, 1);                     synchronized (UiApplication.getEventLock()) {
  
                 }         }         else if (contentType.startsWith("text/")) {
  
                strResult = new String(result);
  
               try {                     ja = new JSONArray(strResult);
  
                } catch (JSONException e) {                   // TODO Auto-generated catch block                    e.printStackTrace();              }
  
             synchronized (UiApplication.getEventLock()) {
                                int temp_int_next=0;
                  try {
                      callback.erase();
                       for(int x=0;x<10;x++){
  
                           j = (JSONObject) ja.get(x);
  
   String get_htmlOff_first = j.get("teaser").toString().substring(j.get("teaser").toString().indexOf(">")+1);
   final String thumb = replace(j.get("thumb").toString(),"files/","http://www.eng.chula.ac.th/files/");
  
                                  UiApplication.getUiApplication().invokeAndWait(new Runnable() {
  
                                  public void run() {
  
                         getImageURL(thumb); 
  
                               }});                      
  
  callback.insert(j.get("title")+" ", ""+get_htmlOff_first.trim(), bitmap_temp , temp_int_next , "Event");                      temp_int_next++;
  
                    }
  
                     } catch (JSONException e) {                  // TODO Auto-generated catch block                    e.printStackTrace();              }               
  
              }         }         else {            synchronized (UiApplication.getEventLock()) {         Dialog.alert("Unknown content type: " + contentType);         }         }
  
  
  

  public void getImageURL(String url) {                HttpRequestDispatcher dispatcher2 = new HttpRequestDispatcher(url,                "GET", this);    }
  

  }

  httpRequest, class Dispatcher is used to get the data from the url

  public HttpRequestDispatcher(String url, String method, helloScreen screen)
  {
  this.url = url;
  this.method = method;
  this.screen = screen;
  
  }
  
  public String getType(){
  
      return type;
  
  }
  
  public void run() {
      try {
  
          if(WLANInfo.getWLANState() == WLANInfo.WLAN_STATE_CONNECTED)
         {
              connection = (HttpConnection)Connector.open(url+";interface=wifi");
       }else{
  
          String uid = getWap2Uid();
          connection = (HttpConnection)Connector.open(url+";deviceside=true;ConnectionUID=" + uid);
  
          }
  
      connection.setRequestMethod(method);
  
      connection.setRequestProperty("Accept","text/html, image/jpg, image/jpeg, image/,image/gif");
  
      int responseCode = connection.getResponseCode();
      if (responseCode != HttpConnection.HTTP_OK) {
      screen.requestFailed("Unexpected response code: " + responseCode);
      connection.close();
      return;
      }
      final String contentType = connection.getHeaderField("Content-type");
      final ByteArrayOutputStream baos = new ByteArrayOutputStream();
      InputStream responseData = connection.openInputStream();
      byte[] buffer = new byte[10000];
      int bytesRead = responseData.read(buffer);
      while(bytesRead > 0) {
      baos.write(buffer, 0, bytesRead);
      bytesRead = responseData.read(buffer);
      }
      baos.close();
      connection.close();
  
                UiApplication.getUiApplication().invokeAndWait(new Runnable() {
  
                      public void run() {
  
                          screen.requestSucceeded(baos.toByteArray(), contentType);
  
                      }
  
                      });
  
      } catch (IOException ex) {
      screen.requestFailed(ex.toString());
      }
  }
  

  The point here is that I have JSON and get the url of the thumbnail to fetch before add to listfield. The image should be ready in bitmap_temp but it still get null.

  UiApplication.getUiApplication().invokeAndWait(new Runnable() {
  
                                 public void run() {
  
                         getImageURL(thumb); 
  
                               }});
  

  public void getImageURL(String url) {                HttpRequestDispatcher dispatcher2 = new HttpRequestDispatcher(url,                "GET", this);    }
  

  callback.insert(j.get("title")+" ", ""+get_htmlOff_first.trim(), bitmap_temp , temp_int_next , "Event");
  

  All day trying to fix it but no success, so I need help from you guys.

  Thank you

  "Is it possible to leave only 1 thread completely pick 10 pictures.

  Yes and this is how I would recommend that do you it this way.  So have a Thread that you give a list of things to do and let it work through each.

• I have a problem with access to the content windows install.

  When you try to install a downloaded Update (Mr. Fix - it of the current version of MS and ATT Communication Manager) windows install stops before finishing and gives an error meesage. I had some instructions on the BITS. Reg, but don't know what to do or where he is. HELP cannot use mt no tethering, no wifi at home aand sick of sitting in Starbucks coffee shops trying to solve this problem.

  Hello

  1. What is the exact error message you get?

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  Make sure that the Windows Installer service is running:

  The Windows Installer service can be disabled on the computer.  
   
  a. go to "Start "-> "run ", type "services.msc " and press the "Enter " key.
   
  b. double-click on the service named "Windows Installer ".
   
  c. check the value the "start type: " field. Is currently set to "Disabled ", then that's the problem. Change it by selecting 'Manual ' in the menu dropdown.

  Step 2:

  Follow all the steps in this article to resolve the problem.

  Problems installing and uninstalling programs on Windows computers

• Is it possible to copy/paste the entries recorded one character to another?

  If a bunch of different characters were all doing the same dance, for example, is it possible to animate one and then copy and paste elements of the track (entry camera, entry of the mouse, etc.) on the other characters (if they have the same anchor points)?

  Not at the moment.  Copy/paste functionality only offered by the host of character is the ability to copy data of track side video in After Effects and paste in character animation.  For more information: using After Effects | Face Tracking

  Hope that helps.

• How to copy all the files from one folder to another?

  Hi all

  I use this code but the files are not copied.

  sourceFolder var = new Folder("/Users/admin5/Desktop/Fonts");

  targetFolder var = new Folder("/Users/admin5/Desktop/123/");

  myFiles = sourceFolder.getFiles ();

  for (var i = 0; i < myFiles.length; i ++)

  {
  Alert (myfiles [i]);

  var myFile2 = new queue (myFiles [i]);    Alert (myFile2.fsName);
  If (myFile2.copy (targetFolder))
  {
  Alert ("Yes");
  }

  on the other
  {
  Alert ("no");
  }

  }

  var MYF = Folder("/Users/admin5/Desktop/Fonts");

  If (myf! = null)

  {

  var myfile = myf.getFiles ("*. *");

  var filename = myf.name;

  for (var i = 0; i)<>

  {

  var sourcePath = File("/Users/admin5/Desktop/Fonts/"+myFiles[i].name);

  var targetPath = File("/Users/admin5/Desktop/123/"+myfile[i].name);

  sourcePath.copy (targetPath);

  }

  }

• Regarding my PHOTOSHOP CS5.1: I upgraded my computer, copy all the content of the hard drive to the new, and although I have disabled the software, I can't turn it on again in the new hard drive. This is an original product with a serial number.

  Regarding my PHOTOSHOP CS5.1: I upgraded my computer, copy all the content of the hard drive to the new, and although I have disabled the software, I can't turn it on again in the new hard drive. This is an original product with a serial number. How can I activate it?

  Hi Uri,

  Please click on the link below and contact the Adobe Support via chat.

  Contact the customer service

  Hope this will help you.

  Kind regards

  Hervé Khare

• I had endless problems with Lightroom since the purchase of subscription for one year in December 2014. Now, the development Module was disabled, as they claim that my subscription has expired...  He spent more time to work does not, and I'm bitterly briv

  I had endless problems with Lightroom since the purchase of subscription for one year in December 2014. Now, the development Module was disabled, as they claim that my subscription has expired...  He spent more time to work does not, and I bitterly regret it.  Help, please!

  Open the Adobe Creative Cloud application then go to preferences then sign out and then sign back with the same Adobe ID that you used to purchase the subscription photographers, that is to say the same e-mail address and password.

  Then open Lightroom and go to the Help menu and make sure that it is signed in with that Adobe ID email address.

• Copy the contents from one page to the other

  Hi all

  I want to copy the contents of the pdpage1 of PDDOC1 to the given page to another pdpage2 of pddoc2.

  Also provide how to save a particular page of PDDoc to another PDF.

  Please help on the above.

  PDDocInsertPage() to copy the page to one PDF to another

• I'm having a problem with my hp psc all in one single 2210

  Hello!

  I'm having a problem with my hp psc all in one single 2210

  First of all, it does not use my tongue (I think he speaks Spanish or Italian)

  so, if anyone knows how to change the language please tell me.

  Secondly, I can't scan the computer says it cannot connect to the scanner and the printer indicates a failure of the scanner massage.

  Hello ComputerLover.

  To restore the language, follow these steps:

  1. press Setup.

  2. press 5, then 5 again. This selects the Language value & country.

  3. you will see a list of languages. You can scroll through languages using the arrows.

  4 using the keyboard, enter the number to two digits to the desired language.

  5. Press 1 for Yes or 2 for no.

  6. continue to select the countries or regions.

  The failure of scan, please see this document.

  http://support.HP.com/us-en/document/c00587971

  Bravo!

• Strange problem with measurement of the color under Mac.

  Hello, I have a strange problem with measurement of the color under Mac. For example I create a gradient in Photoshop color 200 200 200 color 240 240 240. When I measure the color of the gradient with the Photoshop color measurement tool or with the built in OS X color measurement tool measured color is of 200 199 197 to 240 240 238. I measured the same gradient with Photoshop for PC and the values are OK (the same values that I create).

  I don't know what the problem is, but I think that the colors that I create are the same I have measure after creating them and also values between Mac and PC. I appreciate much help or information you could give me that helps me understand what is happening here.

  Thank you for your time

  Marcelo.

  Yep, you guessed it, evidence as monitor basically removes all profiling and just offer it right.

  is it possible to make the OS X color measurement tool to measure the original color values

  You mean the colors of paper - No., as I said photoshop filter your image through the profile document, proof of installation and the monitor profile. Why use Digital color meter for this though?

  I don't understand what is measurement of color values that will change every time point calibrate it my monitor.

  Because color values are "larger" what is on your monitor. Your monitor (via photoshop) makes only the best he can to display these values, which can be anything from LAB colors outside the range of your monitor - to the CMYK color. Calibration, it is the only way to allow your monitor to do this in any way accurately. (never really impossible) The monitors have a certain range and are only representations / would the REAL colors who is the holder of a document, with a profile. There's only one good reason to measure the monitor values so that is to build a monitor profile.

• problem with Safari and the opening of sites

  problem with Safari and the opening of sites

  Please describe the problem in more detail?

  Try to reset the settings of Safari:

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select the Preferences/Privacy tab

  4. click on remove all data from the Web site

  5. close Safari.

  Remove cache Safari files:

  1. click on finder

  2. look for the menu GO to top

  3. click on GO and hold down the option key. This will show a user library folder.

  4. click library and find the Caches folder

  5. in the folder caches com.apple.Safari Ouvrezledossier

  6. move the Cache.db file Trash.

  This should solve the problem. If it does not help, try to disable the Safari extensions

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select Preferences

  4. find the Extensions tab

  5 disable all extensions of

  6. relaunch Safari

• Using an IP191 monitor, have random horizontal stripes on the screen - have no problems with other browsers. also no problem with FF on the other PCs on the family

  Using an IP191 monitor, have random horizontal stripes on the screen - have no problems with other browsers. also no problem with FF on the other PCs on the family.

  These "streaks" seem to be the domain of the high frequency analysis; they can be eliminated by scrolling upwards or downwards.

  Hello, maybe it's a problem with hardware acceleration - try updating your graphic driver, or in case this does not solve the problem, or there is no new version available at the time, disable hardware acceleration in the firefox menu

  

  > options > advanced > General.

• Problem with Vista hit the Satellite X 200 - 20 s

  Sometimes during typing on vista, it will stutter and freeze. The time is very short. Is this a problem with vista or the laptop. The T7300 Core 2 Duo 2 ghz processor.

  Hello

  I have a Satellite Pro S200 and the same problem was with my camera. It s is not a hardware problem, it s more a driver related issue No. So, the best thing you can do is update your bios and keep your drivers up-to-date. Just check the download Drivers Toshiba site and make sure you have the latest drivers installed.

  I had resolved my stuttering (core2duo 2.33 Ghz, 2 GB RAM) by updating all drivers...

  That's all

  Good bye

• Want to Phoenix 860-010: problem with fonts and the noisy fan

  I have a new machine, just a day old, and I'm having a problem with fonts.  The file Explorer, Edge and other similar programs seem to go from a very readable font that lights up in half a second or less whenever I move down on the page in these applications.  Police that results is much more difficult for me to read because of the lightness that results. I have not met this problem before.  Frankly, I don't know the source of the problem.  Is it hardware (video card) or (Windows 10) operating system software?

  Hello @PhotoGene47,

  Thanks for the quick response!

  Have you tried to see the document that I mentioned in my previous post?  If you prefer to have the Board repaired, you can consider contacting the HP support by phone for additional options.  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!