Problem with creating object entity based on web service

Similar Questions

• problem with ProdikaContracts/Nutrition v3.0 save web service analysis nutrients

  Hi, so we are in the process of upgrading our system of PLM4P to 6.1.1.4 and encounter a problem using nutrient analysis web service record.  We get an unhandled exception fault it's say "could not authenticate by using"DoLoginByPass() ".   Any ideas on what is the cause?

  P.S. the .svc and wsdl look good when I go to them, the error happens when I we try to run our client interface or if we test all services nutrition v30 in soapUI

  EP Web Services Guide includes a section on the deployment and configuration:

  Note: the username and password parameters have been changed to draw from the data entered in the SetupAssistant. Don't forget to configure the password and username entries (Prodika.ProdikaAPI.SysUser and Prodika.ProdikaAPI.SysPassword) using the tool of SetupAssistant in Agile PLM for process 6.1.1

  This assumes that you use the web services with a user of type single Director, as opposed to another user by web service call. If you do the latter, read to determine the approach to authentication - Option 2.

• Problem with create table as select (DEC)

  Hello
  
  We try to data cleaning of huge tables. And a customer of guise is reanme main table to the backup table. Then create a master table in select * backup table with some test.
  
  Now the problem with create table select, is that it creates the table without indexes and constraints. Is it possible to use the ETG (create the select table) with the same structure that he was the (all index, constriaints).
  
  Or any other solution to solve this problem?
  
  Thanks in advance

  Sweety wrote:
  Hello

  We try to data cleaning of huge tables. And a customer of guise is reanme main table to the backup table. Then create a master table in select * backup table with some test.

  Now the problem with create table select, is that it creates the table without indexes and constraints. Is it possible to use the ETG (create the select table) with the same structure that he was the (all index, constriaints).

  Or any other solution to solve this problem?

  Thanks in advance

  No, this is not possible. You need to get the manuscript of dependent object and create it manually.

• I had problems with access to most of the Web sites and I noticed that HTTPS is no longer, how do I make permanent HTTPS so I can access any Web site?

  I had problems with access to most of the Web sites and noticed that HTTPS no longer appears whenever I try to access a Web site. I can easily connect to my gmail and facebook account, but the problem is that when I click on a link on FB and gmail, I get the annoying message "refused to connect.

  How to address this issue, rather how to make HTTPS permanent so I can easily access any Web site. The date and time on my laptop are both correct. I am currently using OS x 10.9.5.Please!

  How to address this issue, rather how to make HTTPS permanent so I can easily access any Web site.

  My guess is that you have a damaged or invalid certificate entry OS X KeyChain, but to directly answer this question, I would say that consider you something like HTTPS Everywhere. Note, it is not available for Safari. It is available directly through the Google Chrome browser extensions.

• I have problems with your e-mail via a web client is sending no text in the body and sending HTML instead of text.

  I have problems with your e-mail via a web client is sending no text in the body and sending HTML instead of text.  I am told that this problem is because of the BING toolbar on my browser - is this correct?

  original title: Messaging with the BING toolbar problem

  I suggest blind carbon copy yourself e-mails coming out in the future to check for other errors and if they happen then find a new Web hosting provider.  They should have been aware of the conflicts, one would presume.

  Steve

• A little problem with an object

  Hi guys...

  I discovered a problem with an object, but I Don t see where the problem may be...

  I have a 'bomb' added to the step only if the var bomb is greater than or equal to 1... and, of course, if you enjoy it, the var Gets a-... However, after a while, it seems once again

  Any ideas?

  Here is the code bound to it:

  var dynamite: Loader = new Loader();

  Dynamite.Load (new URLRequest ("dynamite.png"));

  Dynamite.x = 650;

  Dynamite.y = - 10;

  var bombsound:Sound = new Sound();

  var bombsoundChannel:SoundChannel = new SoundChannel();

  var bombreq:URLRequest = new URLRequest ("bombexplosion.mp3");

  bombsound. Load (bombreq);

  If (! level) {var level: int = 1 ;}}

  var lvlup:int = 200;

  var updlvl:int = (lvlup * level);

  If (!) (Count) {var count = 0 ;}

  If (! bomb) {var bomb: int = 1 ;}}

  dynamite.addEventListener (MouseEvent.CLICK, buttocks);

  function bum(e:MouseEvent):void {}

  If (sonido) bombsoundChannel = bombsound.play ();

  -bomb;

  If (bomb == 0) {}

  If (dynamite.parent) {dynamite.parent.removeChild (dynamite) ;}}

  kill every1

  }

  function level1(): void {}

  If (level == 1) {}

  addChild (nivel1pic);

  If (bomb > = 1) {addChild (dynamite) ;}

  }

  }

  function level3(): void {}

  If (level == 3) {}

  removerViejoNivel();

  addChild (nivel3pic);

  If (bomb > = 1) {addChild (dynamite) ;}

  }

  }

  function level5(): void {}

  If (level == 5) {}

  removerViejoNivel();

  addChild (nivel5pic);

  If (bomb > = 1) {addChild (dynamite) ;}

  }

  }

  function level7(): void {}

  If (level == 7) {}

  removerViejoNivel();

  addChild (nivel7pic);

  If (bomb > = 1) {addChild (dynamite) ;}

  }

  }

  function level9(): void {}

  If (level == 9) {}

  removerViejoNivel();

  addChild (nivel9pic);

  If (bomb > = 1) {addChild (dynamite) ;}

  }

  }

  function level12(): void {}

  If (level == 12) {}

  removerViejoNivel();

  addChild (nivel12pic);

  If (bomb > = 1) {addChild (dynamite) ;}

  }

  }

  function updateLevel(amount:int):void {}

  level += amount;

  Level1();

  Level3();

  Level5();

  level7();

  level9();

  level12();

  }

  Level1();

  Level3();

  Level5();

  level7();

  level9();

  level12();

  Thank you!

  Use the function trace to track when the bomb is added.  IF this happens in each of the functions level, then add traces to everyone to see where and when that happens.

• How can I create a query with the data control to the web service?

  I need to create a query with the order of web service data, WSDL, it is query operation, there is a message of parameter with possible query criteria and a return message contains the results. I googled but can't find anything on the query with the web service. I can't find a criterion "named" to the data control of web service as normal data control. Blog of Shay, I saw the topics on the update with the data of web service command. How can I create a query with the data control to the web service? Thank you.

  Hello

  This might help

  * 054.     Search form using control data WS ADF and complex of entry types *.

  http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/index-101235.html

• Problem with creating Web Service Client using Oracle JDeveloper

  Hi all
  
  I am trying to create a Web Service Client using Oracle JDeveloper. The property of the compiler of the project I updated JRE 1.4
  
  When I run the web service client, he gives me a lot of errors saying:
  ' Error (32.2): annotations are not supported in - source 1.4'
  
  I wonder why JDeveloper uses annotations even after that I set the compiler property to 1.4
  
  I'm following this link to create the Web service client:
  http://www.Oracle.com/technetwork/developer-tools/forms/WebServices-forms-11g-094111.html
  
  Any help in this regard would be greatly appreciated.
  
  Thank you
  Scott.

  Scott, when you run the proxy Web service in JDeveloper, you will see a bunch of jars listed in the classpath in the Journal JDeveloper window.
  All of these classes must be in the classpath of your server when the class is deployed there.
  Note that by default, I don't think they are going to be included in the JAR that you build for the proxy when you deploy.

• Problem creating an account of HP Web Services

  Hi, I just brought a 4500 desire.  All the installation program has been very well and I can print and scan wireless so I'm sure the printer works.  I also activated the Web service and received a paper copy of the printer that lists the steps and the printer code.

  However, when I tried to create a new account on behalf of HP Web Services, after I entered all the required information, it still not let me go through and said "Email must match to ' and ' match of motorization of passwords '.»  So for the moment I'm not able to use eprint.

  I appreciate if anyone can help?

  I read another post with the same problem after I sent my.  I think that my problem was that IE and Chrome do not display the field "confirm your password" so that I can do it using Firefox.  If the account is created.

  Anyway, it is now resolved and thanks for your quick response.

  Thank you!

• Problem when creating objects to the point user clicks on the screen

  I'll sometimes have a problem when clicking on the screen and have an object at this time created. 95% of the time it works properly, but sometimes, the object is created in a different area of the screen.

  Everyone comes across something similar? Or is it likely to be just a problem with the Simulator?

  Thank you very much for any help offered.

  If you want a "newLabel" to appear in the contact details of your mouseEvent, but only if details of mouseEvent are lower on the screen (having a higher value) at the height of your textButton.

  If your TextButton object does not touch the top of the stage (y = 0), you'll want to write this instead:

  if (event.localY > textButton.y + textButton.height)
  

  It may be a good idea to write it anyway, just in case you want to change the position of the TextButton.

  In addition, localX and localY properties of your mouseEvent are compared to the event containing sprite.  for example, if you have a canvas Sprite that is a parent of your textButton and is tuned for the mouseEvent.  otherwise, if there is no sprite contains (second phase) for your event, you'll want to use stageX and stageY instead.

  I guess since I can't be sure of your intentions here, but try this instead:

  private function createItem(event:MouseEvent):void
       {
       if (event.stageY > textButton.y + textButton.height)
          {
          var newLabel:TextField = new TextField();
          newLabel.x = event.stageX;
          newLabel.y = event.stageY;
          newLabel.text = "test";
          newLabel.setTextFormat(userTextFormat);
  
          addChild(newLabel);
          }
       }
  

• Problem with creating a sequence

  Hello
  
  I'm having a problem with a sequence that I am creating. Basically, I'm trying to create a sequence with a default value based on the value in another table, i.e.

  CREATE SEQUENCE seq
  START WITH (
              min(customer_id) from customer
              )
  INCREMENT BY 1;

  Is this possible? I get errors.

  You can use dynamic sql or, if you use SQL * more take advantage of substitution variables:

  SQL> DROP SEQUENCE seq
    2  /
  DROP SEQUENCE seq
                *
  ERROR at line 1:
  ORA-02289: sequence does not exist
  
  SQL> DECLARE
    2      stmt VARCHAR2(1000);
    3  BEGIN
    4       SELECT  'CREATE SEQUENCE seq START WITH ' || min(empno)
    5         INTO  stmt
    6         FROM  emp;
    7       EXECUTE IMMEDIATE stmt;
    8  END;
    9  /
  
  PL/SQL procedure successfully completed.
  
  SQL> SELECT seq.NEXTVAL FROM dual
    2  /
  
     NEXTVAL
  ----------
        7369
  
  SQL> DROP SEQUENCE seq
    2  /
  
  Sequence dropped.
  
  SQL> COLUMN s NEW_VALUE s NOPRINT
  SQL> SELECT  min(empno) s
    2    FROM  emp
    3  /
  
  SQL> CREATE SEQUENCE seq START WITH &s;
  old   1: CREATE SEQUENCE seq START WITH &s
  new   1: CREATE SEQUENCE seq START WITH       7369
  
  Sequence created.
  
  SQL> SELECT seq.NEXTVAL FROM dual
    2  /
  
     NEXTVAL
  ----------
        7369
  
  SQL> 
  

  SY.

• Problems with library objects / Smart in 2015 CC

  Everyone is having a problem with their library all convert to dynamic objects?

  Before the 2015 update, I could drag multiple items in the library [a form of vector of arrow in this case] to my documents and change their colors independently. If I need to be black and white, it was easy to pass. Drag the item from library to the screen, double-click on the layer, choose a color.

  Now, I can't do that. Library items seem to have their own "container" If you want to, which houses a dynamic object - change the objects replace everything in my entire file. Now, using work plans that can be 20 arrows - pretty boring.

  Someone at - there workaround / best way to do this? I have the layer styles, but that seems daunting.

  THX

  option/alt drag place also in layers.

• Problem with creating, truncating and deleting a database in 1 transaction

  Hello
  
  I came across a problem when it is in the same transaction creating a data base, truncating it and then delete it. Do these 3 things causes the following transaction validation to last forever.
  The following code causes the problem:
  
  File envHome = new File ("truncate-delete-test");
  envHome.mkdirs ();
  EnvironmentConfig envConfig = EnvironmentConfig.DEFAULT;
  envConfig.setAllowCreate (true);
  envConfig.setTransactional (true);
  envConfig.setTxnSerializableIsolation (true);
  Environment = environment (this.envHome, envConfig);
  
  Transaction txn = this.environment.beginTransaction (null, TransactionConfig.DEFAULT);
  
  DbConfig DatabaseConfig = new DatabaseConfig();
  dbConfig.setAllowCreate (true);
  dbConfig.setTransactional (true);
  String dbName = "test-db";
  Database db = this.environment.openDatabase (txn, dbName, dbConfig);
  
  CBI Close();
  environment.truncateDatabase (txn, dbName, false);
  DB = this.environment.openDatabase (txn, dbName, dbConfig);
  
  CBI Close();
  this.environment.removeDatabase (txn, dbName);
  
  TXN.Commit (); <-this statement would never return.
  
  I encountered this problem with version 4.0.92. I've updated to 4.1.7 but the problem still exists.
  Also, it manifests when the records are written to the database before and after it truncate.
  
  Looking in the process with the debugger shows the following stack trace during the commit endless happens:
  
  [...]
  DbTree.deleteMapLN (DatabaseId) line: 1069
  DatabaseImpl.finishDeleteProcessing (line): 1164
  Txn.cleanupDatabaseImpls (boolean) line: 1404
  TXN.Commit (durability) line: 728
  TXN.Commit (line): 549
  Transaction.Commit (line): 227
  [...]
  
  Depending on where I stop the process, there are additional calls on top of the stack.
  
  Exit Registration unfortunately does not help here, as the log messages stopped once the problem started to appear.
  
  Is it somehow not allowed to create, truncate and delete a database in the same transaction? I couldn't find anything in this sense in the documentation, and it is no exception either.
  Or have I came across a bug in I here?
  
  Thanks in advance for any advice or solutions.
  
  Christoph
  

• problem with opening pdf file of the web browser

  I have Acrobat Pro ver 6 and Adobe Reader 9.1 on a computer.  When my user tries to open a pdf file from the web as it gets the following error message:

  "Adobe Acrobat/Reader that not running to view the PDF files in a WEb browser.  ADBE Acrobat/Reader version 8 or 9 is required.  Quit and try again. »

  What also happens is that Acrobat Pro 6 worm opens and nothing is there.

  I don't know why he received this message from Reader 9.1 is installed.

  One can shed some light on this for me.

  This user must have Acrobat and Reader on its system.  I understand that there are problems with having both.

  It has also set up so that any PDF opens using Reader 9.1.

  Thank you

  Configuration of your PC drive by default for embedded PDFs has become confused, because of multiple solutions of Adobe PDF documents installed on a PC.

  Solution 1:

  Go to start > run

  Type regedit, and then click OK.

  Navigate to the following key: HKEY_CLASSES_ROOT\Software\Adobe\Acrobat\Exe

  Make sure that the correct default data value is set to the path where are installed the Adobe Reader or Acrobat.

  The default installation values are:

  "C:\Program 9.0\Reader\AcroRd32.exe Adobe.

  or

  "C:\Program Files\adobe\acrobat 6.0\acrobat\Acrobat.exe" (not sure of this path.  Make sure that on your PC)

  If Adobe Reader or Adobe Acrobat is installed.

  Solution 2:

  Configure the browser to use Acrobat or Adobe Reader as a helper application.

  If you use Firefox to browse the web, you can change this setting in Firefox by clicking on:

  Tools > Options

  Click on the "Applications" tab

  The first item in the list should be "Adobe Acrobat Document".  In the Action list, click the drop-down arrow and select the application you want to read a PDF file in the web browser.  Click OK and you should be done.

  If you use Internet Explorer to view a PDF file, try the steps below.

  After you configure Acrobat or Adobe Reader as a helper application, the browser starts the helper application in a separate window and displays PDF files within this window. Acrobat and Adobe Reader both include a preference that allows you to specify the Acrobat or Adobe Reader as a helper application.

  To configure Acrobat or Adobe Reader as a helper application:
  Start Acrobat or Adobe Reader.
  Choose Edition > Preferences.
  Select Internet on the left.
  Deselect Display PDF in browser using [Acrobat application], and then click OK.
  Quit Acrobat or Adobe Reader.
  The next time you select a link to a PDF file in the browser, a dialog box asking what you want to do with the file. If you select open, the browser opens the PDF file in Acrobat or Adobe Reader (request for assistance); If you select save it on the disk, the browser saves the PDF file on your hard drive.

• problem with Shared Object

  Hello flash developers,.
  
  I have a problem with getting the value of a variable in a shared object.
  I'm saving up two variables named evt_obj.target and evt_obj.target .text
  It is only the evt_obj.target variable that gives me problems.
  During the recording of my trace shows the variable is successfully sent to the shared object, but when it is retrieved, it appears just as undefined.
  Any ideas?
  
  Thank you
  Michael

  Well solved the problem by using String (eval (evt_obj.target))
  Still would like to know why it won't work when saved directly, must investigate when I have more time ;)