Problems with library objects / Smart in 2015 CC

Similar Questions

• A little problem with an object

  Hi guys...

  I discovered a problem with an object, but I Don t see where the problem may be...

  I have a 'bomb' added to the step only if the var bomb is greater than or equal to 1... and, of course, if you enjoy it, the var Gets a-... However, after a while, it seems once again

  Any ideas?

  Here is the code bound to it:

  var dynamite: Loader = new Loader();

  Dynamite.Load (new URLRequest ("dynamite.png"));

  Dynamite.x = 650;

  Dynamite.y = - 10;

  var bombsound:Sound = new Sound();

  var bombsoundChannel:SoundChannel = new SoundChannel();

  var bombreq:URLRequest = new URLRequest ("bombexplosion.mp3");

  bombsound. Load (bombreq);

  If (! level) {var level: int = 1 ;}}

  var lvlup:int = 200;

  var updlvl:int = (lvlup * level);

  If (!) (Count) {var count = 0 ;}

  If (! bomb) {var bomb: int = 1 ;}}

  dynamite.addEventListener (MouseEvent.CLICK, buttocks);

  function bum(e:MouseEvent):void {}

  If (sonido) bombsoundChannel = bombsound.play ();

  -bomb;

  If (bomb == 0) {}

  If (dynamite.parent) {dynamite.parent.removeChild (dynamite) ;}}

  kill every1

  }

  function level1(): void {}

  If (level == 1) {}

  addChild (nivel1pic);

  If (bomb > = 1) {addChild (dynamite) ;}

  }

  }

  function level3(): void {}

  If (level == 3) {}

  removerViejoNivel();

  addChild (nivel3pic);

  If (bomb > = 1) {addChild (dynamite) ;}

  }

  }

  function level5(): void {}

  If (level == 5) {}

  removerViejoNivel();

  addChild (nivel5pic);

  If (bomb > = 1) {addChild (dynamite) ;}

  }

  }

  function level7(): void {}

  If (level == 7) {}

  removerViejoNivel();

  addChild (nivel7pic);

  If (bomb > = 1) {addChild (dynamite) ;}

  }

  }

  function level9(): void {}

  If (level == 9) {}

  removerViejoNivel();

  addChild (nivel9pic);

  If (bomb > = 1) {addChild (dynamite) ;}

  }

  }

  function level12(): void {}

  If (level == 12) {}

  removerViejoNivel();

  addChild (nivel12pic);

  If (bomb > = 1) {addChild (dynamite) ;}

  }

  }

  function updateLevel(amount:int):void {}

  level += amount;

  Level1();

  Level3();

  Level5();

  level7();

  level9();

  level12();

  }

  Level1();

  Level3();

  Level5();

  level7();

  level9();

  level12();

  Thank you!

  Use the function trace to track when the bomb is added.  IF this happens in each of the functions level, then add traces to everyone to see where and when that happens.

• WW146AV: Problem with HP Media Smart Photos

  My HP Media Smart pictures has suddenly stopped working.  When I try to open my pictures, it stays on for a few seconds and then closes.  I think I need to re - install the Media Smart Photo software; However, I have to uninstall the old software before I can re - install.  I will not lose the pictures that I previously imported into Media Smart?

  Second question: If someone has had this problem with the closure of news media Photos Smart after a few seconds?

  Windows 7 64 - bit;    Laptop HP Pavilion dv6t-3100

  Hello

  It looks like existing MediaSmart Photo installation is damaged, but the software indexes only the pictures that are on your drive hard reader, so uninstall and then reinstall this product will not result in the loss of all images.

  Note that, once the reinstallation is complete, launch the software and let it re-index your multimedia files - this may take a few minutes depending on the number of images.

  Kind regards

  DP - K

• Problems with the extension manager for 2015 of CC (was: Extension Manager fails to load products)

  Can Hi anyone help me understand what could be the problem with my extensions Manager. I just installed or rather updated all my apps, including extensions through the CC Manager Manager. After updated all my applications, I think I lost all my extensions on Photoshop CC 2015. So I tried to reinstall the extensions Manager and update it, but the problem seems to be it seems to take on Photoshop, which makes it difficult for me to install new extensions. Is there something escapes me?

  Hi Didier,.

  See a related discussion on the same topic: Re: Extensions CC2015 gone

  I heard the team there are some problems with the Add-ons and the command line tool, and the team is trying to solve. I'll let you know as soon as I have an update.

  See Adobe Exchange for official communication on the extensions Manager.

  Thank you

  Preran

• problem with Shared Object

  Hello flash developers,.
  
  I have a problem with getting the value of a variable in a shared object.
  I'm saving up two variables named evt_obj.target and evt_obj.target .text
  It is only the evt_obj.target variable that gives me problems.
  During the recording of my trace shows the variable is successfully sent to the shared object, but when it is retrieved, it appears just as undefined.
  Any ideas?
  
  Thank you
  Michael

  Well solved the problem by using String (eval (evt_obj.target))
  Still would like to know why it won't work when saved directly, must investigate when I have more time ;)

• Problems with the objects from the library to a Flash document

  Hello

  I have a question about a library would be created within a

  Flash document. I have a lot of pieces of graphic objects

  inside a library for a FLA file.

  I then drag those songs on stage to build a complex more

  object. I then select all the pieces and group them and

  convert a video clip of this new object.

  Place it I move in the library of the FLA file.

  I noticed there are two a graph for this object and the

  video clip for this object. For me, these are 2 separate

  objects. So, when I delete the object graph,.

  It also deletes the clip that I created of the object.

  No one knows why this happens?

  Thank you

  Jim

  This is because the 9 symbol using the symbol 8.  IE, when you created the symbol 9, symbol 8 was on stage.

  to remedy this, go to the chronology of the coast of 8, copy the graphics, remove symbol 8, go to symbol of 9 timeline and paste.

• Deliver the Photoshop files with library objects

  Is it possible to deliver a customer a final PSD that uses dynamic objects related to cloud? I don't want to share the entire library with the client, because they do not have CC and so not access Adobe Cloud. There are also cases where using an element or two of other libraries, I don't want to share during the delivery. Deliver the files without the library leads to non editable smart objects (broken link error open document). Others that the conversion of files embedded or linked individually, layer by layer, is there a way to incorporate or to export the library files that are used in a document to be supplied as well as the final PSD overall?

  Choose: Layer > smart objects > incorporate all related

  I hope this helps.

• problem with upgrade to Premier Pro 2015.3...

  I have a project that has many layers of clips... it's all good for the month in the old version of the first pro - I upgraded to 2015.3 and now in the world of pain - some multilayer clips now turn green. I can clear the issue sometimes, but he always comes back. original files are not damaged.

  any help appreciated.

  should I uninstall and start again?

  Of course... There are MANY of us that do. Which I am part.

  I have the CC2014.2 (versions 8.x), CC2015.2 (version 9.x) and CC2015.4 (version 10.x) loaded on my computer now. I have multiple ones 'open' at the same time, but have never had a problem having several... other versions of tracking who 'set' of programs go hand in hand, of course.

  If you use several programs of the "DVA", digital audio/video programs, they must be in the games of "corresponding". Although they do not have the same serial numbers of construction between programs, the CC number is little used. So I have a complete set of PrPro, AfterEffects and SpeedGrade for the 8.x and 9.x builds and build PrPro, AfterEffects, prelude and the hearing of the last series. Hearing works with virtually all of the builds.

  Not really aware of what problems there, as it is a designed process. Best practices, such as recommended is to migrate a project "forward" mid-project, to complete a project in version appeared in NEVER. This assumes of course that we keep the latest version of a series in full operation as we start new projects in the new series.

  Neil

• Strange problem with the object Panel.

  Hi all! I found this forum in a desperate attempt to find a solution to my problem. I searched without success, but if has already replied to this question, can someone point me in the right direction?

  FreeHand MXa works with Vista? (Or MX, I tried two versions of the disc in the box). I can install that's fine, no problem at all. When I actually started working, I noticed that the object Panel was not on the right side where it normally is, so I click on the window and you click object. Instead of giving me the Panel, I have a popup that says "Could not complete your request because an unknown command has occurred", and then a little box pop up that looks like it might be the object Panel, but it is empty. No marks, no nothing and it does not meet anything, except when I hit the button of output on this subject. It is the same version I had installed on my old computer. I got a new computer yesterday and I tried to install today and I can't understand why it doesn't let me open the object Panel. I'm so lost without it! Is there another way to work in FreeHand without it? I have Illustrator, but I really prefer working in Freehand for more things I did on a daily basis. It's just much faster for me to do some of the things I do. I need my object Panel...

  This TechNote may help:

  http://go.Adobe.com/kb/ts_tn_12050_en-us

  Judy Arndt

• Problem with creating object entity based on web service

  Hi all
  
  AM trying more than 100 times to test how can I build an entity object based on web services, when I give the link of wsdl (which I already working when I use it as data for the web service control) in the wizard, I got the same message
  "' Field to read the WSDL URL service file: /... wsdl" "
  is it a find out what the problem is
  
  Thanks in advance

  It's pretty simple:

  Web service data control - gives you the best way to interact with a web service in your ADF UI
  Proxy for the Web service - allow manipulations on the interaction with the web service, for example restructuring results or settings - you can then expose this as a Javabean data control to bind to the user interface
  ADF BC basic web service - for integration with other applications of ADF BC that only allow you to access through web services.
  ADF BC stripped VO/EO Web service - based when you want to get features such as LOVs, will fetch, etc., which provides ADF BC. It will take you some good coding.

• problem with library

  When I delete the photo after photo scan (face), I have the white point in my library. How to fixed it?

  Select fuse the empty elements into one and ignore, until a next update solves this problem.

• Problem with 'Less' function in LabVIEW 2015

  Hi guys,.

  I create a VI that will allow me to record data at intervals of time du.1.2.3,.4,.5,.6,.7,.8,.9, 1, 2, 3, seconds etc 4 or 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 20 or 30 seconds etc. According to my my main VI entry.

  In VI I joined, I maintain a case down and a case of rocker. I went through the case maintain down with execution of climax, and it seems to be ok. My problems begin when you use the rocker case. If I start time Stress control to 0, it increments a.1.2.3,.4,.5,.6,.7,.8.9 and 1 as expected. However, when he goes from ajouter.1 in the structure of cases where it is supposed to start adding 1, he eventually add un.1 and a 1 for the first time, then continue to add 1 as expected. I go back into the code and when I turn on highlight execution with a 1 coming from the shift register is to enter the function ' below to "in the structure of the bottom case and it generates a real when it must produce a fake. My case top of page structure also produces a zero when it should start out 1.

  Can someone please run this code and see if the problem exists for them to preserve my sanity? Or am I just being a fool and lack of something obvious because of a crossover cable or something?

  Thanks for your help

  Basically, you have several choices:

  • Make sure the floats an 'accurate' (= whole) value (for example, by multiplying by 10, and by changing the result to I32, the last step is necessary because only the integer representation allows accurate digital comparisons
  • do the strings of floats with defined accuracy
  • write (and use) a "almost equal" function (subtract the value you are testing of the float, take the absolute value and see if)<0.0001, or="" whatever="" precision="" you="">

  Of these, the last is likely to be (by far) the fastest and "" will remind you that decimal values generally are 'approximations' (you can represent 0.25, 0.5, 0.125, etc. exactly, but not 0.1, for example).

  Bob Schor

• Having problems with library... need permission to see my own photos... help!

  Aloha!... I had a new HP Pavilion to replace the older Presario (with XP), so now I use Windows 7, and I had the local store put my old hard drive with all my photos on it in an external enclosure. Then, I found that my new computer doesn't have the ease of use that my previous version had when it came to manipulate images. I love sort and get the sunsets from the beach and together in a single folder, but a new made it difficult to do. Then I imported the photo library. I am always a bit disappointed overall during the step down in terms of ease of use and the options available...

  But now, I must still find a way beyond the wall of 'permission' to be able to revisit my old photos. I click on one, and library comes out to say that I don't have permission to access the location of the file. I have read permissions, all tutorials I have tried, but it took hours for takes me moments for others...  I therefore ask you, how about this little obstacle? My friend says it's all a part of the installation where we normal people are confused into thinking we are or should be administrators... make a home a computer into an instant nightmare. What secret little do I need to know who will be the easiest to live with this more expensive machine? Any help is deeply appreciated. Thank you, Raven on Maui

  You can use it on personal folders,

  http://www.Vistax64.com/tutorials/112795-context-menu-take-ownership.html

• Problem with pinned objects objects/non-epingles on the same page

  I have a vertical menu on my website that appears on every page; It is attached on the upper left corner. On many pages of my site, I pinned objects (images, text, etc.) adjacent to the menu PIN. Almost all the scrolling on my Web site is parallax scrolling (horizontal or vertical). I'm running into a problem where, depending on the size of the browser window, not pinned ojbects overlap the menu PIN. The positioning of objects on the page seems to depend on whether or not the pinned object; I guess my question is possible to the objects of the PIN over another? I want the menu to stay no scrolling, but I want to make sure my non pinned objects passing never cross / overlap of the menu because it looks so sloppy. The question arises when the browser window is too small, but again, I want to make sure this will never happen anyone who is looking at my site. The first photo, this is how it should look like (what it looks like when the browser window is large), the second photo is the problem that I'm trying to fix.

  

  Just read here:

  NAV/menu hidden behind images bar

• Problems with Lightroom CC Importfunction, Version 2015.2.1

  Hello

  After installing the new Version with the new import interface I have trouble with my photo previews. Direct after you import a photo I can see the foto for a second or two. Then begins the creation processd preview. When its finished, only a 'black' photo is displayed. I tried a test with importation via attach function. It works great as always and the preview was created without any problem.

  Does anyone has an idea how the problem might be solved?

  Best regards

  Thomas

  Hi TKolbeck,

  Greetings!

  Sorry for the inconvenience.

  Please read this article: https://helpx.adobe.com/lightroom/kb/thumbnails-display-black-in-lightroom-6-2.html

  Concerning

  Jitendra