Problem with custom element tree converter...

Similar Questions

• Problem with a spanning tree Protocol

  Hello

  I have a problem with the spanning tree Protocol, when I connect a printer on C3560E cisco switch. It's the Show Logging:

  * 27 sep 18:57:29.451: % SPANTREE-7-PORTDEL_SUCCESS: GigabitEthernet0/8 removed from Vlan 600
  * 27 sep 18:57:31.976: % SPANTREE-6-PORT_STATE: Port Gi0/8 instance 600 from blocking disabled
  * 27 sep 18:57:31.976: % SPANTREE-6-PORT_STATE: Port Gi0/8 instance 600 from blocking to listening
  * 27 sep 18:57:32.731: % SPANTREE-6-PORT_STATE: Port Gi0/8 instance 600 moving to listen to persons with disabilities
  * 27 sep 18:57:32.731: % SPANTREE-7-PORTDEL_SUCCESS: GigabitEthernet0/8 removed from Vlan 600
  * 27 sep 18:57:35.072: % SPANTREE-6-PORT_STATE: Port Gi0/8 instance 600 from blocking disabled
  * 27 sep 18:57:35.072: % SPANTREE-6-PORT_STATE: Port Gi0/8 instance 600 from blocking to listening
  * 27 sep 18:57:37.068: % LINK-3-UPDOWN: Interface GigabitEthernet0/8, changed State to
  * 27 sep 18:57:38.075: % LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/8, changed State to
   

  This is the configuration of the port, this switch was created L2 of the Vlan:

  See the memory of Vlan:
  
  600 PLT_SERVICE active Gi0/8
   
  Display Port access:
   
  interface GigabitEthernet0/8
  Zebra printer description
  switchport access vlan 600
  switchport mode access
  logging events spanning tree
  event logging status
  end
   
  Trunk Port:
   
  interface GigabitEthernet1/1
  Description box
  switchport trunk encapsulation dot1q
  switchport trunk allowed vlan 1 600
  switchport mode trunk
   

  Please someone help me.

  Kind regards.

  Thank you.

   
   
   
   
   
   
   
   
   
   
   

  Hello

  The port passes all traffic? You can test the printer.

  Thank you

  John

• I can't have the option in menu to 13 items to work.  Any ideas?  I have already downloaded all the Templates menu and updated the software.  I never had this problem with 7 elements.

  I can't have the option in menu to 13 items to work.  Any ideas?  I have already downloaded all the Templates menu and updated the software.  I never had this problem with 7 elements.  With the help of 13 elements, I can successfully burn my movie on a disc (DVD) without menu.  The burning process is interrupted after that I added a menu.

  Rick

  First of all, please remove the stopper at the end of the content of the timeline. It is not necessary it and burn the causes of the problems.

  The main Menu marker should be OK, no similar problems as the stopper a.

  RTA

• Some problems with custom skin

  Hello
  
  I have created custom skin and I have some problems with it.
  
  (* 1) as you can see on [this image | http://www.zilp.pl/z/test01/Members/jakubp/Folder.2007-06-22.2113643678/File.2008-09-29.7372305410] item of Navigation within the Navigation pane command appears quite a color must be white, but gets by default the font for application (dark green) color. *
  My definition of the skin is the following:
  
  / * NAVIGATION PANE * /.
  AF | navigationPane - tabs:tab - start {(background-image: url('/skins/zilprcskin/img/tab-start.gif'); width: 4px ;}}
  AF | navigationPane - tabs:tab - end {(background-image: url('/skins/zilprcskin/img/tab-end.gif'); width: 4px ;}}
  AF | navigationPane content tabs::tab {(background-image: url('/skins/zilprcskin/img/tab-content.gif') ;}}
  AF | navigationPane - tabs:tab:hover af | navigationPane - tabs:tab - start {(background-image: url('/skins/zilprcskin/img/tab-start.gif'); width: 4px ;}}
  AF | navigationPane - tabs:tab:hover af | navigationPane - tabs:tab - end {(background-image: url('/skins/zilprcskin/img/tab-end.gif'); width: 4px ;}}
  AF | navigationPane - tabs:tab:hover af | navigationPane content tabs::tab {(background-image: url('/skins/zilprcskin/img/tab-content.gif') ;}}
  
  AF | navigationPane - tabs:tab: selected af | navigationPane - tabs:tab - start {(background-image: url('/skins/zilprcskin/img/tab-start-selected.gif'); width: 4px ;}}
  AF | navigationPane - tabs:tab: selected af | navigationPane - tabs:tab - end {(background-image: url('/skins/zilprcskin/img/tab-end-selected.gif'); width: 4px ;}}
  AF | navigationPane - tabs:tab: selected af | navigationPane content tabs::tab {(background-image: url('/skins/zilprcskin/img/tab-content-selected.gif') ;}}
  AF | navigationPane - tabs:tab: selected: hover af | navigationPane - tabs:tab - start {(background-image: url('/skins/zilprcskin/img/tab-start-selected.gif'); width: 4px ;}}
  AF | navigationPane - tabs:tab: selected: hover af | navigationPane - tabs:tab - end {(background-image: url('/skins/zilprcskin/img/tab-end-selected.gif'); width: 4px ;}}
  AF | navigationPane - tabs:tab: selected: hover af | navigationPane content tabs::tab {(background-image: url('/skins/zilprcskin/img/tab-content-selected.gif') ;}}
  AF | navigationPane - tabs:tab {margin right: 2px ;}}
  AF | navigationPane - tabs:tab - link {color: #ffffff; make-weight: bold ;}}
  AF | navigationPane - tabs:tab - link: hover {color: Red; make-weight: bold ;}}
  AF | navigationPane - tabs:tab: selected af | navigationPane - tabs:tab - link {color: #ffffff}
  
  (* 2) as you can see on [this image | http://www.zilp.pl/z/test01/Members/jakubp/Folder.2007-06-22.2113643678/File.2008-09-29.7372305410] menu scroll icons displayed twice: my and by default (rich). My definition of the skin is the following: *.
  
  / * MENU * /.
  AF | menu {- tr - visible elements: 2 ;}}
  AF | menu: depressed.
  AF | menu: stressed {(background-image:url('/skins/zilprcskin/img/menuHighlighted.gif') ;}}
  AF | : bar menu-point-text {color: White; make-weight: bold ;}}
  AF | menu: highlight: bar-point-text {color: #CEFFF1 ;}}
  AF | menu: bar-point-open-icon {(content:url('/skins/zilprcskin/img/small-arrow-down.gif'); margin-left: 2px ;}}
  AF | menu: go to the top icon {(content:url('/skins/zilprcskin/img/small-arrow-up.gif') ;}}
  AF | menu: go to the bottom-icon {(content:url('/skins/zilprcskin/img/small-arrow-down.gif') ;}}
  AF | : submenu of the menu-open-icon {(content:url('/skins/zilprcskin/img/small-arrow-right.gif') ;}}
  AF:menu:bar - point-text {make-weight: bold ;}}
  AF | commandMenuItem:menu - point-icon-style,
  AF | : submenu of the menu-icon-style {background-color: #a1caca; border: none ;}}
  AF | commandMenuItem: highlight: menu - item text.
  AF | commandMenuItem: highlight: menu-point-Accelerator,.
  AF | commandMenuItem: highlight: menu-point-open-indicator.
  AF | menu: highlight: submenu text,.
  AF | menu: highlight: submenu-Accelerator,.
  AF | menu: highlight: submenu Open indicator {background-color: #a1caca; border: none ;}}
  
  (* 3) as you can see on [this image | http://www.zilp.pl/z/test01/Members/jakubp/Folder.2007-06-22.2113643678/File.2008-10-01.6059969354] I also have a problem with default Panel box. Header font color should be white and ago strange empty space in header: *.
  
  / * DEFAULT CORE BOX PANEL * /.
  . AFPanelBoxHeaderCoreDefault:alias {color: #ffffff ;}}
  AF | panelBox::content:core:default {border-color: #149492 ;}}
  AF | panelBox:header - departure: kernel: default {(background-image: url('/skins/zilprcskin/img/tab-start.gif') ;}}
  AF | panelBox:header - Centre: kernel: default {(background-image: url('/skins/zilprcskin/img/tab-content.gif') ;}}
  AF | panelBox:header - end: core: default {(background-image: url('/skins/zilprcskin/img/tab-end.gif') ;}}
  
  Kuba

  Hello Kuba,

  I have a quick look in your message. For the moment I can solve one of your questions. The text of the panelBox header that you use skin:

   af|panelBox::header-element { color:White; } 
  

  Is on the white space, the 'skins/zilprcskin/img/tab-start.gif' image enough width? I use the same selectors (af | panelBox:header - departure: kernel: default af | panelBox:header - Centre: core: by default, af | panelBox:header - end: core: by default) and it works for me (but I'm not using an image, the only background color). Probably you need to change the width of header-early, restricting the scope and the lengthening of the Center header.

  As Simon said, Firebug is very useful to do this :)

  JVN

• A problem with Aten UC232A serial converter in windows 8

  I have still the problem mentioned earlier (on your site) with Aten UC232A serial converter in windows 8 update. The installation of Aten software stopped, because the installation program does not accept windows 8!

  My problem is solved through the provider Aten. The provider send me a new set of driver (PL2303Driver_ATEN_v3430230_INF) for the converter. So I manually install the converter and it works.

  Thankfully, I am messy my new equipment this morning.

  It is a software problem (driver).

• printing problem with photoshop elements 13.1

  I recently got an impression of my Photoshop elements 13 problem with my photosmart HP 7520. When I hit print the file I get this message

  The information about the registered printer are not compatible with this version of photoshop elements, or the saved printer is no longer available you will need to check your printer settings before printing

  The printer works in other applacations.

  I tried the update to 13.1 no help

  I uninstalled and reinstalled my printer Photosmart HP 7520.

  I tried to rename the printer.

  I tried to do a different default printer.

  I tried printing from Microsoft option in PDF and I get a message "because the default printer could not be opened" I also get this when you try to print to the photosmart

  all other printing options grey out the "print" key.

  You are very quiet.

• Save before exit Skillbuilders (version 3.0.1 for APEX 4.0): problem with some element of list in the form Manager

  Hello

  I have a problem with the plugin save before exit that I downloaded from Skillbuilders. As I use Oracle APEX version 4.0.2 and Oracle 10 g r2 database; so I downloaded one that says "Save before release (version 3.0.1 for APEX 4.0)" skillbuilders and follow-up of their documentation to import the plugin and use it.

  My problem is that even if I do not make any changes to data in the form and go to another tab. the alert message always appears, and by the way, I have an element of list manager on my form and it gets highlighted. So, even if I make the changes or do not change; still, the alert message is displayed and highlights the element of list manager. I think maybe the problem is to have a crèche in the form list item. I have reproduced the same problem in my personal workspace. Here are the details.

  http://Apex.Oracle.com/pls/Apex/f?p=55129

  Details of the workspace

  Name of the workspace: raghu_workspace

  username: orton607

  password: orton123

  App # 55129

  Page: 2 - has the element of list manager.

  Page 3 - works fine without the element of list manager

  Please help with possible suggestions.

  Thank you

  Orton

  Orton,

  I have connected to the workspace you and added a replacement JS file that corrects this error.

  If please, give it a whirl and let me know if you find other problems with it.

  It is to the 3.0.2 version of the plugin and I do not know if this even fix will work for your local Apex version earlier.

  When you are ready to go to the APEX 4.0.2 Please contact me directly for assistance. In the meantime, I'll work on the creation of a patch for this kind of new downloads of the plugin will contain this change.

  Greg

  [email protected]

• Problem with custom "CTRL + <" shortcut in Photoshop CS6 or CC (Windows 7).

  Hello

  I have a problem with a shortcut customized in Photoshop CS6 and CC. It works fine in Photoshop CS5.

  I put the "CTRL + <" shortcut to the command "flatten image." I use it for years, so it's difficult to change my habits of . I saved the shortcuts and everything works fine until I have restart Photoshop.

  After restarting Photoshop, the shortcut is automatically set on "CTRL + &"! I edited the file ".kys" where my custom shortcut is saved, and the file is good:

  	< control type = "static" id = "1141" name = "Flatten image" >
  		< shortcut > Ctrl + & lt; < / shortcut >

  I maybe it might be a problem with the custom workspace that also store shortcuts but this file is fine too.

  I don't really know how this is possible because the files are correct... Photoshop saves this values elsewhere?

  I would really appreciate help with this.

  Thank you

  G.

  Hi people,

  Or is that what I should say hi?

  Looks like you found a big bug.  The thing is, this bug is also bit strange...

  First of all, CNTRL +.< does="" indeed="" change="" to="" cntrl+&="" on="" both="" win="" and="" mac. ="" that="" said,="" this="" is="" only="" an="" issue="" for="" french,="" german,="" italian,="" spanish,="" and="" danish,="" not="" english,="" czech,="" or="" romanian,="" as="" this="" key="" is="" \="" and="" cntrl+\="" is="" assigned="" to="" select="" layer="" mask="" in="" channel="" panel="" in="" the="" later="" languages. ="" i've="" tried="" in="" for="" a="" number="" of="" different="" commands="" and="" the="" results="" are="" the="">

  In addition, however, once I met the problem ONCE on Mac, the app correctly prevents its use again.  Odd.  Windows has no these "belts" for this problem.

  I went ahead and logged a bug.  To be honest, I don't expect that the key (to the left of the W on the French keyboard, to the left of the Z for English) to work as a hotkey in general as it is very dependent on language, but its transformation of< to="" &="" is="" pretty="">

  Thank you

  David

• Problems with Photoshop elements 11 gel

  I recently upgraded to items 9 to 11 items. Now, when I work in the organizer or editor of the program freezes frequently and then displays the message "program does not. If I wait long enough – a few minutes - it starts running again. I never had this problem with Elements 9

  DDenny01,

  You are still sufering from this problem?

  Brian

• Problems with 7 elements

  Hello

  I have Windows Vista Home Premium on my laptop and I use Windows 8.  I use my 7 Elements since 2009.  I had problems with it - today I have tried to put some textures (layers) on one of my images and couldn't.

  Here are a few of the I'm having problems:

  1 - the name of the tools are not displayed to the top.

  2. when I use Ctrl-C to copy the texture and I use Ctrl V to apply the texture, it does not appear in my new layer.

  3 when I select a layer copy, the "mobile dash" do not appear.

  4 - layer Options are not displayed to the top.

  5 - the blue spinning pointer appeared and appears on and off.

  I think I might have to uninstall and reinstall.  So, if I do not uninstall my items, I will be able to re - install without any problem, re: codes of registration, purchase of codes or anything else?  Is there anyone that I could chat with on this subject?

  Thanks for your help and your support.

  Kind regards

  Amada

  What I do is keep my fingers on the keys Shift + Ctrl + Alt before double click on the shortcut of pse 7 and then double click on the shortcut and press the keys.

  It is sometimes difficult to get the right moment.

• Problems with custom events

  I'm trying to figure out this problem I'm having with custom events, I've read all the documents and tutorials that I can find, and this bit still makes no sense.
  
  I have the following configuration:
  
  LoginForm: custom component (which is created as a popup via the PopupManager)
  ApplicationHeader: custom component (which is added to the MXML application)
  application: creates the LoginForm as a popup via the PopupManager, has ApplicationHeader defined in the MXML.
  
  When a user logs in the LoginForm dispatches an event customized, there are two defined listeners:
  
  1. in the application:
  
  private void showLoginForm(): void {}
  var loginForm:LoginForm = LoginForm (PopUpManager.createPopUp (this, LoginForm, true));
  loginForm.addEventListener (UserLoggedInEvent.USERLOGGEDINEVENT, userLoggedInHandler);
  }
  
  2. in the component custom of ApplicationHeader :
  
  private function init (): void {}
  parent.addEventListener (UserLoggedInEvent.USERLOGGEDINEVENT, userLoggedInHandler);
  }
  
  When the event is dispatched the request listener picks it up as expected, however the listener inside the custom component sees ever-even if the event is set to bubble.
  
  The only way I managed to get this working is to do the following in the application:
  
  private void userLoggedInHandler (event:UserLoggedInEvent.USERLOGGEDINEVENT): void {}
  // .. the event handling logic
  the return of the event
  dispatchEvent (event);
  }
  
  This makes no sense at all, what happens if I didn't want the application to handle the event itself. There is a line in the documentation of the event
  who says "You can only save a listener of events with an object if that object dispatches the event." who could explain it, but it is still absurd.
  
  Any help/tips/examples would be most useful as I am pulling my hair out here.

  Never mind, I just read this post ( http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=60&catid=585&threadid = 1257178 & highlight_key = y & keyword1 = custom % 20components) and I was pointed in the right direction - I had to add the metadata for the event to the application.

• Problem with custom jobs 11.1.1.5

  Hello experts!
  
  I have a problem with the import of my tasks to the new env. I had previously worked with 11.1.1.3, and my fine imported tasks. But I have problems in 11.1.1.5.
  My steps:
  (1) modify the weblogic.properties and add dirs I need.
  (2) OIM_ORACLE_HOME game
  (3) place my jars in SheduleTask dir and dir location metadata xml files
  (4) run weblogicImportmetadata.sh
  
  What's wrong? Or should I change smth in xml?
  
  Thank you.
  
  Excuse me, import ofc.
  
  Published by: VarlamAnd on February 9, 2012 02:56
  
  Published by: VarlamAnd on February 9, 2012 02:59

  You must change the namespace here in 11.1.1.5

  
  **
  Published by: Zaba Nayan on February 9, 2012 03:30

  Published by: Zaba Nayan on February 9, 2012 03:31

• HOW TO SOLVE MY PROBLEM WITH MICROSOFT OPEN XML CONVERTER. WHEN AN E-MAIL CANO'T OPEN THE ATTACHMENTE

  Every time to enter an e-mail address, when have an attachmente I have intention to open but bring a dialog box telling me: 'Microsoft Open XML Converter.  Click here to open bring another dialog box telling me: "Save."  In the final, a small dialog box tell me: not recorded in any file. What should I do?

  Hi MarioVidal

   

  1. what email program are you using? What is windows live mail, Hotmail, Gmail, etc.?

  2. meet the issue only with some specific files types with come as attachments or with each of them?

  3. during how long have you had this problem?
  4. the problem occurs for all e-mail programs?

  
  Let us know the answers to help you best.

• Problem with transfer element allowing the transfer of bridge?

  Hello

  After changing the configuration of the gateway on the pre-production environment, there are a few problem to transfer the call to the number of external phone by CVP:

  We have 2 gateway (one is connected to T2, VXML one another), there's an application call Studio for the transfer of the

  calls to external phone number, in this application we used transfer element with these configurations:
  
  
  
  {0}
  Phone
  60 s
  2 1
  true
  
  
  
  
  
  

  The GW VXML thrown error.connection.baddestination CVP application event, and there is this error on the VXML Bridge: ContactingDest_SetupDone: Setup done State = CS_INVALID_Number

  Could you please let me know how to fix this problem?

  ARO
  Maryam

  Yes, otherwise how gateway VXML knows only where the RTC route called?

  the transfer element using speech on bridge to launch VXML browser of outgoing calls, your VXML gateway should be aware of the delivery.

  You can put cath all dial-position (Destination model. (T) the bridge VXML that carry the PSTN calls for the door of the infiltration and penetration gateway allows taken send to the PSTN.

• I have problem with Photosgop elements 14

  1. Company Adobe, ho a problema e chiedo a Voi di help:

  Premetto, ho a PC con da 10 Windows in windows of da aggiornamento 8.1, e a i5 - 3750K

  CPU 3.40 GHz 3.30 GHz, sistema a 64 bit con 16 Gb di RAM; Yesterday ho labor-intensive software of it dall'Adobe "Photoshop Elements 14" (premetto che avevo only Photoshop Elements 7 e funziona egregiamente).

  Ho inniziato ad installarlo my dopo aver Program scompattato I have files nella cartella sul desktop "Adobe Photoshop Elements 14" ed begun ad installare, mi compare United Nations con box the th:«Error di inizializzazione del programma di film.» "Download Adobe Support Advisor by find it problema" Ho tried a download Adobe support my mi dice che "Adobe Support Advisor e stato hold off." Non sono riuscito a cars Adobe Reed perched non vi e una E-mail available per i problemi degli my solo users a forum in inglese. COSA posso fare? Ho will i soldi inutilmente o vi e una soluzione al problema? HO a PC (no mio) altro con windows 7 ultimate 64 bit e li riesco ad installarlo. MI potete help? Grazie anticipate. Saluti, Calogero Mascari

  Dear Adobe, I have a problem and ask you to help me:

  I declare, I have a PC running Windows 10 Windows 8.1 upgrade, is an i5 - 3750K

  03:40 GHz CPU 3.30 GHz, 64 bit system with 16 GB of RAM; yesterday I bought the software from Adobe "Photoshop Elements 14" (I declare that I had installed Photoshop Elements 7 and works very well).

  I inniziato to install it, but after the program unzipped files in the folder on the desktop "Adobe Photoshop Elements, 14" and has started to install, I get a box with the warning: "error Installer initialization. Download Adobe Support Advisor to detect the problem, "I tried to download the Support from Adobe, it is said that" Adobe Support Advisor was arrested. "I couldn't contact Adobe also because an E-Mail is available for users, but only an English forum problems. What can I do? I spent money needlessly, or there is a solution to the problem? I have another PC with windows 7 ultimate 64-bit (not mine) and I can install it. Can you help me? Thanks in advance. Best regards, Calogero Mascari

  See the link below:

  https://forums.Adobe.com/thread/1848277