Problem with deletion of sections of images.

Similar Questions

• Problem with deletion of snapshots

  Hello

  I have a problem with deletion of snapshots for virtual machine running on ESXi 3.5. I had a problem with the lack of free space on the drive where VM is hosted. I managed to free up space and wanted to commit snapshots (delete) to free additional space. Unfortunately, at the time of the withdrawal of clichés that I ran out of space again on this store now I'm stuck with clichés present in the store but not visible in the Snapshot Manager.

  Any suggestions on how I can get rid of these pictures now? All I can think is move VM converter of this virtual machine to a new one.

  Thanks, Marcin

  The reason that you ran out of space is the way a "Delete All" is handled.

  I guess in your case a 'Delete All' may temporarily need up to approximately 115 GB of additional disk space. Troubleshooting VM snapshot problems perfectly describes the process. Take a look at the animation in the "process behind 'Remove all' snapshots '.

  So what you can do is:

  -Free up enough space, create another cliché, and then do a "Delete All".

  -Cold clone or V2V the VM in another data store

  -Recreate the vmsd file based on the instantaneous channel from the header vmdk files and delete the snapshots one by one starting with the first (oldest) snapshot. If you want to try this make sure you fully understand other snapshots that it will end in the corruption of data!

  Due to the size and the possible impacts on the storage I recommend doing this during peak hours and with the virtual machine shut down.

  If you have a different available datastore (~ 300GB), I would recommend cloning. This does not affect the original files in case something goes wrong. If the clone works, you can safely remove the "old" VM and files and migrates the virtual computer is back to datastore original.

  André

• Problems with export low res/compressed images Lightroom

  Hi, I recently noticed problems with the export of images. Even if I did change the pixel dimensions that I used to use (640 x 600 for a blog), the exported image is significantly more low resolution than usual. The only things that have changed is that I upgraded from LIghtroom stand-alone 5-6 Lightroom on creative cloud - and also I got a new Macbook Pro.

  You seem to be using a mac book pro with a retina display. This is that websites must be programmed to feed your browser an image of higher resolution that they would feed to people using a lower resolution screen. Not all Web sites do it properly (not more). I don't know if your site is done automatically. An image of 640 x 600 or 900 x 800 won't cut in general, certainly not to the size you are displayed on this Web page. These sites are usually not this worked well. I've written about how to do it on my blog here: Jao photo blog: a much simpler way to serve the retina displays the correct image but you need a way to use both versions of the image somewhere.

  On your retina display when opening an image of 640 x 600 pixels in preview will also look bad as it will show too default double pixel. A good thing to do is to go to preferences in preview.app, click on the images and select "1-pixel image is equal to 1 pixel of screen. Then when you open small images, it should show the actual resolution of the screen. If your image is larger than the screen, you can press command-0 and it will display the image in the native screen resolution. Assume that you are using "best for display" in the context menu of the resolution in the display of system preferences section. You should have probably defined it this way in any case because otherwise the 1:1 in Lightroom do not display correctly. Your screenshot is displayed to indicate that you have defined properly.

  In addition, there is absolutely no reason to use quality 100. Most of the 75-85 images will be indistinguishable from 100, but will be much smaller in size. Second, ignore the DPI setting. It is not relevant to the images online. The only thing that matters is the size in pixels.

• problem with the transition and external image

  Hello! I have a little trouble with the transition to a new state that contains an external image. I want a titlewindow to resize when the user clicks on a button and view an external image. the size of the external image is unknown until it is loaded, so I put the widths/heights to 100%. However, the transition "resize" does not know the size of the image in time and comes alive in a small rectangle...
  
  I discovered how to solve this problem by deleting the passage and making the invisible titlewindow until the image is loaded (using the event 'complete'). Ideally, I would like to use the functionality of transition, however and am curious to know if anyone has any ideas on this point - perhaps triggering the resizing to start once the image is loaded? I can only find a way to display a transition through mxml - this can be achieved via actionscript?

  When you use States and there is a tag This means that the child will be added to the display list. The object already exists (a new operation has been made about it). It may not be in a fully realized State first because it has not been added to the display list and therefore his complete cycle of creating the Flex framework has not been executed.

  I haven't run the scenario I propose, so it might actually not, but I have another suggestion below.

  You should be able to have in the State that when you are ready to load the image, img.source = url; should not give you an error. The question is, without the image being added to the display list, try even to load image from url and trigger the complete event? If it does not trigger the complete event, then you can change the States there.

  My alternative is to not put the Image in the State, but leave it in your state of base with a width and a height of zero. Having the button set the source property of the image (or call the load() method). When the complete event triggers switch States.

  In your , instead of having an AddChild, you'll SetProperty. Something like this (width, height would be similar):

  Now, the transition must simply use the effect of .

• Problem with Delete Subproperty

  I wanted to delete a global container of Station with stored results init.

  The expression I used is

  StationGlobals.StoredResults.DeleteSubProperty (Parameters.Step.Name, 0x400000)

  Parameter.Step.Name is my search string. and in the Option property tried to use 0 x 400000 substitute variable Notdeletable.

  Problem here is that it works for the execution of a few as there is no problem in removing the Subproperty for 4 or 5 times. After that it only removes subproperty.

  And the same problem, I did not see in OperatorMode. This problem only occurs in the sequence editor. I use TestStand Ver4.2.1.

  Is there no work around for this or any other option to forcefully remove the subproperty.

  Thanks in advance,

  Christian M

  Larsen and Toubro Limited

  Mysore. India.

  Hi Share_Good,

  He had some problems with the file you attached. I made a few changes that seems to make it work the way you want and simplify things. I added comments to help explain changes in the file. Please let me know if you have any questions about the changes. I was unable to reproduce the error you posted, but I think that these changes could solve the problem, because one of the issues that I fixed in question is not cloning the property you obtained using GetPropertyObject before setting another property that has as it's the suproperty (property can have one of their parents If you need to make a copy and store the copy not the original). Also, make sure your Locals.StepResult is a variable of object reference as I have in the file attached sequence rather than a container.

  I also created a version of the file, SequenceFilePostResultListEntry2.seq, that uses an array of containers to store the results instead of the subproperties, allowing the stage names to be anything, including having spaces and '.' characters.

  Hope this helps,

  -Doug

• Problem with deleted game

  Hello

  I have recently uninstalled a game from my PC through Control Panel control/uninstall. But my problem starts when I finished tne uninstall. In folder where was a game that I uninstalled another game that has been deleted with the uninstallation of the first game, because the system has deleted all the folders and subfolders. Now, when I run the instalation of a game I acidentally removed with the uninstalaltion of the first part it is said: the game is already instaled. You want to start the uninstall? When I click Yes, nothing happens... A system can not install a game because it was not properly uninstalled and it "thinks" it is installed on my machine and cannot uninstall because the game egsists not really starts. I run Windows 7.

  Help, please. Thank you.

  Hello docleen,

  Thanks for posting your question in the Microsoft Community.

  I understand that you have difficulties to install a game that you deleted accidentally. I would certainly help you to fix this problem.

  To better understand the issue and provides that you open troubleshooting steps, we start with two questions:

  1. what game are you talking about?

  2. who was the game that you actually deleted from your computer?

  Please do not respond with more information on the topic to provide you with the best solution.

  If you have other problems with Windows, please post in the Microsoft Community. We would be happy to help you.

• Problem with my payment on Stock Images

  Hello. I was wondering if this has resolved. I just signed and updated my payment.

  Error

  There is a problem with your payment. Please try again later or contact Adobe technical support.

  Is there a solution? I need to buy 2 videos to finish a project...

  Hi K.Winger,

  The trolley came several times. I'll be sure to pass on to product management.

  I think I know what is happening. Instead click on the cart icon in the thumbnail of the image, you can click on the center of the thumbnail to open the details for the video. There will be a licence and the registration option and you will be able to buy the video for details. We are aware of the problem with the purchase of the tile and hope to have a fix for this soon.

  Please let me know if this work around does not work for you.

  EBQ

• Problem with the rendering of the image in Photoshop CC2015

  Hi, I just bought PC especially for the Photoshop works (usually use Mac) and I have a serious problem with image rendering powered by the device driver (nvidia GTX980). Lines and other parts of my design are strongly serrated (it looks like the poor antialiasing) - even in an excerpt from 1:1 (100%), so it's really invisible before. Could you look at my screenshot and try to understand what is happening? In this State, it is totally useless to my job (I am perfect pixel). Help, please.

  On the screen:

  1 - view 300% of the severely affected hardware rendering (screenshot of view 100%) - on the left you see the battery icon?

  2. right - 300% view showing how it should look like in real life.

  

  OK, I just found the solution. It's pretty simple and obvious in some respects if PS is using OpenGL as a main renderer, setting 3D graphics card will have a significant impact. Sailing... I just need to disable antialiasting FXAA in NVidia Control Panel. Now everything looks good as is.

  Problem solved.

• Problem with the scale of the images during the import.

  I took 250 pictures which I've edited in a film in stop motion. However, I encountered some problems.

  The biggest problem is that when I imported the images in the timeline, they were strongly increased and not even centered in the frame. as you can see in this screenshot:

  

  It is a big problem. You would think that I wouldn't have to go through every signle image and resize it down to properly adjust the setting... good? She has not even centered which means that I have to scale and move and be very precise and it's going to take so many hours to do! What is the problem here, how can I do so that when I import images, they are at the right scale?

  problem 2: when I put the images in the scenario that they were 'backwards '. As in, the last image was the first in the chronology and the first image was the last. It's as if the program TRIES to make my life a living hell.

  Daniel, in order to solve your problem, in principle, you should not import your numbered stills in the form of unique images, you must import them as a sequence - tick 'numbered Stills' checkbox in the import and Bob from your uncle - PrPro dialog box will deal with all of these images as a single sequence.

  Go to Edit-> preferences-> Media-> Timebase of media for an indefinite period and desired default rate. In order to change the framerate of already imported image sequence select it in the project Panel, right-click and choose change-> interpret the film...

  Length default for still images is also set through preferences: Edit-> preferences-> General-> still Image default duration. To change the duration of all the stills in your timeline select all, right click, choose speed/duration and set the duration to 1 framework for example. Don't forget to check the Ripple edit, move the creeping Clips .

• Oracle 10g - problem with "DELETE from TABLE WHERE ID in (1,2,3)" (use cfqueryparam)

  Hello, everyone.

  I have problems with executing a DELETE statement on an Oracle 10 g server.

  DELETE 
  FROM tableA
  WHERE ID in (1,2,3)
  

  If there is only a single ID for the IN clause, it works.  But if more than one ID is provided, I get an error message "SQL command" not correctly completed.  Here's the query as CF:

  DELETE 
  FROM TRAINING
  WHERE userID = <cfqueryparam cfsqltype="CF_SQL_VARCHAR" value="#trim(form.userID)#">
       AND TRAINING_ID in <cfqueryparam value="#form.trainingIDs#" cfsqltype="CF_SQL_INTEGER" list="yes">
  

  Someone at - it works with Oracle that can help me with this?  I'm a developer experienced in MS - SQL; Oracle is new to me.

  Thank you

  ^_^

  So much worse... a colleague just told me I should always use parentheses around the values in the IN clause.

• Problems with display of text and images from adobe

  I'm a non-techie has a terrible problem with Adobe Acrobat 8 Professional.  Even my group of office tech support can't fix, and they have reinstalled the program twice.  When I receive PDFs with a picture or a graphic, the image/picture comes through as an opaque grey square.  Sometimes the entire document (same text) comes through as an opaque grey square, with only the border area that appear in white.  If I try to print the document, the gray part prints.  Other people in my office who has received the same document do not have this problem.

  I have encountered this problem after that I used Adobe Acrobat Professional for the first time to 'clean up' a document I had scanned a photocopy.  I changed some settings on Adobe to see if I could get a clean version of the document, and it is perhaps the origin of the problem.

  I would be eternally grateful to anyone who has any advice on how to solve this problem!

  Susanne

  PS I have attached a few screenshots in Word that will help illustrate the problem.

  Try going to edit > Preferences > Page Display > Page content and information and make sure the "Show large images" checkbox is checked.

• Problem with deletion and Redownloading iTunes and Quicktime. Error: unavailable network resources

  Original title: trouble with deletion and Redownloading iTunes and Quicktime

  I am trying to remove iTunes in my computer through my control panel, but its telling me that it cannot remove, because of unavailable network resources.  I accidentally deleted quicktime then this all started.  Before iTunes was working.  When I try to re-download the ITunes it says that you must delete old version first.  Please help me someone with a great idea?

  Hello

  Step 1: Check if you are able to uninstall iTunes in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.

  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.

  4. When prompted, click on restart to restart the computer.

  Step 2: Pass through 'Verify iTunes and related components are completely uninstalled' in the article below: http://support.apple.com/kb/HT1923

  Then try to reinstall iTunes .

• problem with deleting safely removable media

  whenever I'm trying to remove my USB drive I get this error:

  This 'nom_peripherique' device cannot be stopped because its use in.

  Close programs use this unit maybe and try again later.

  so I go to Task Manager and close all programs I can think can possible cause the error

  and tried again, still the same result

  so I tried to close all programs, the list say except windows those needs to stay connected (were about 20 left) and tried again

  always the same stupid mistake.

  Microsoft can't make it so that it shows what programs are using the camera? or even better give an option to close the programs for you?

  Best regards

  Vermilion

  Hello

  ·        This happens every time every time you plug-in the device to the system?

  ·        Since when are you facing this problem?

  It may be that your USB flash drive is still using some of the system files or it could be that there is little file that is transferred to your system. Restart the computer and check if the problem is solve. It may be that some of the files on your USB device are corrupted or infected with the Virus. I suggest you analyze your USB devices with security software and checking, just to make sure that there are no corrupt or infected files.

   

  Step 1:

  Try to remove the USB device in safe mode and check. Follow the steps mentioned below.

  a. restart the system and keep tapping F8 until you reach the start menu.

  b. Select safe mode from the list and press ENTER.

  c. check to see if you are able to open the application without any problem.

  For more information, see the article mentioned below.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Step 2:

  Format the USB.

  Note: I suggest you to save important data which is present in the USB key given that formatting the USB device will erase all the content that is present in the USB.

  a. connect the USB device.

  b. Click Start menu and click computer.

  c. right-click on the drive letter (indicating the USB device) and click on Format.

  For more information, see the article mentioned below.

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a problem with deleting a password of a program in IBM lotus 123.

  Original title: IBM Lotus 1-2-3

  I'm under Lotus 123 97 on Windows 7.

  I'm having a promlem remove a PASSWORD in a program.

  I, ve been on SECURITY, then on RESERVATION, but from there I met problems.

  Any suggestions?

  Hello Norm,

  Welcome to the Microsoft community where you will get the best solutions for Windows related problems.

  I understand you have questions, remove the password of IBM Lotus program. The question you have posted is related to IBM Lotus and would be better suited to IBM Lotus support.

  I suggest you to check with the support of IBM Lotus for more information.

  http://www-01.IBM.com/software/Lotus/products/123/

  I hope this helps you get the password removed. If you have problems with Windows in the future, please post in the Microsoft Community.

• Problem with deletion text overset

  I have a paper of 40 pages with text in foreign excess at the end that I want to delete, but I can't get the text in excess for a reason, I just get the empty text box after the text box empty with a small red sign in the corner. Is there a way to remove the overset text without actually doing out there?

  I work in CS5 on Mac OS 10.6.7.

  Two ways, actually.

  The best way is to open the story editor (Edit > change mode editor or Cmd [Ctrl] + Y while the cursor is in the history). In this way, you can see what you remove.

  The other way is to put the cursor in the last place, you can then press Cmd (Ctrl) + shift + end to select up to the end of the story.

  Most likely, the problem is there's something on the line following which makes it too wide for the image - can - be no break applied to too much text or a series of words separated by nonbreaking spaces and break out.