Problem with driver GoPro

Similar Questions

• HP 255 G4: Problem with Driver Usb

  Hi, I have a problem with my HP laptop. Two usb ports do not work because it is not the correct driver.

  Help, please!

  [Personal information]

  Product: M9T13EA #ABZ

  Good bye

  This problem is really stubborn...

  OK, time to pull out the artillery heavy.

  Download and install both of these drivers and reboot and see if that takes care of the issue.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7834528 & swItemId = ob_154066_1 & swEnvOid = 4059

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943835 & swItemId = ob_133037_1 & swEnvOid = 4059 #tab1

• Problems with drive HARD Toshiba MK1234GSX

  Hello

  I have an Acer with a secondary HD TOSHIBA MK1234GSX 9920.
  Since I installed Windows 7, I have problems with the HD.
  Upon restart, the HD is considered as having problems with windows: when I look in device management, I have this message "Windows has stopped this device cause it has problems. (Code 43) »
  I did a full scan (chkdsk), but no not found errors.
  If I turn off the HD, reactivate and restart, sometimes I can access the HD which works perfectly.
  Does anyone have an idea on this?
  Thank you.

  PS: Sorry for my English :)

  CHKDSK is not good to test a HARD drive for bad sectors, its only good when looking for errors of the filesystem (FAT32 or NTFS).

  Test the hard drive to find errors using DFT.
  DFT download: http://www.hitachigst.com/hdd/support/download.htm#DFT

  Download the ISO file and burn it to a CD - R disc (there is also a version on disk if it's easier).
  If you don't know how to burn an ISO file, read this guide: http://www.petri.co.il/how_to_write_iso_files_to_cd.htm
  Restart your laptop and boot from the disc of DFT.
  Choose the 'Advanced' test and let it run (it may take an hour or two).
  If you see a message in red box, the HARD drive is faulty.
  An error code 0 x 70 means there are bad sectors and the HARD drive needs to be replaced.

• Satellite P100-221: problem with driver battery composite microsoft

  Hello

  I have problem with my satellite p100-221! A few days ago I had problems with my audio driver (audio conexant high definition), after starting it was indicates that the pilot of his failed to initialize, I reinstaleed this driver several times and at last it was working OK, but I noticed that windows does not see the battery.

  The small cell in the status bar disappeared and I can not say for how long can I use laptop with battery. Laptop works as if it is connected to the AC. In the Device Manager appeared an exclamation on the battery composite microsoft.

  I tried to renew the drivers but nothing. I deleted combatt.sys and cmbatt.sys in windows\system32\drivers but they appear again. I started in safe mode deleted, but after normal start, they do not appear. I also deleted them in Device Manager, and after start-up, this device did not and do not ask me to install the drivers.

  What can I do?

  Hello

  I noticed that you did a lot of complex changes to your device. You deleted some files, update drivers, etc..
  I guess that your operating system has been enough installed and worked properly.
  Windows XP supports a system restore tool. This tool allows you to roll back the OS to the beginning.
  In my opinion, you should try to use this option. Maybe he'll bring your laptop at the time where everything worked correctly.

• problem with drive Intel HD 520 - bad resolution

  Hello

  I bought the HP Pavilion 13-s104ne model and I am facing problem with the resolution.

  some msg boxes are not clear, it looks like to scanned box, I am really very angry about this and I need a solution...
  I tried to unstall and install the driver but nothing changed...

  Please help me

  Medhat

  medmarai

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about resolution issues and wanted to help.

  Since it is a machine relatively new, instead of hurt for hours to fix yourself, why not just let HP fix it - for free!
  
  You must contact the HP Customer Support directly so they put you in contact with HP Tech Support to see what they can do on the diagnosis and repair of your machine remotely.
  
  I did recently, and HP technology was able to remotely access my PC on the Internet and to make the necessary repairs.
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Problem with driver with Agilent 6031 A feeding

  Hello and goodmorning,

  I tried to develop my first application of cvi in which I need to use a power supply (model Agilent 6031 A). I first use direct command of GPIB and I managed to make it work, but with some difficulty, due to the fact that sometimes orders are missed.

  So I downloaded the driver from the website of OR, and I tried to implement in my code. I found a problem with the first statement, the init it. Here is my code:

  ViPSession InstrumentH;
  
  ...
  
  ...
  ...
  
  All = hp6xxxa_init ("GPIB0::5:INSTR", VI_ON, VI_ON, 1, & InstrumentH);

  After running the above code, I found in 'All' value '-1073807339 "and InstrumentH is equal to NULL."

  Any idea and advice would be much appreciated.

  P. S.

  There is a way, as in Labview, to find the explanation of the error Code?

  Found the problem. Food must be set of SCPI commands on the old controls ARP using "SYST:LANG".

• Problem with Driver Audio (Audio beats) HP Pavilion dv7 6190sl

  Hi guys,.

  my name is Francesco and I have a problem with the sound card in my PC...

  After formatting the PC, I reinstalled all the drivers, even if the installation is successful, I can't hear sound from my pc...

  Unfortunately, I deleted when formatting the disk that contains all drivers... (HP_Recovery)...

  You have a solution?

  Thanks, Francesco!

  Hello

  Open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select Properties.  Click the driver tab and then click on "update driver".  Select "Browse my computer for driver software", then "Let Me pick from a list of drivers for devices on my computer.  "High definition Audio Device" left click once to highlight, then click the next button to install it.

  This makes all the difference?

  Kind regards

  DP - K

• Problem with drive HARD and Vista install

  Hi all

  A few weeks ago, my Dell Inspiron laptop computer started to freeze. I could boot ok and my desktop wallpaper and icons were all there, but I couldn't run or open anything. I did the Bios tests and my Vista installation disc and told me there was a problem with my hard drive. I wiped it and tried to reinstall vista and that I could see it wasn't working because it took hours and then seems to have stopped again during installation. So I bought a new one and tried to install Vista. everything was going well until it is restarts a second time and I got a black screen with a mouse pointer icon. I had to reinstall it running for about 4 hours, at least an hour of that time which was all that was going on and the hard disk wasn't spinning.

  How long on avg would take to install Vista, if it is running normally?

  is there anything else that might be a problem that would not appear in the repair of Vista or Bios diagnostics?

  Any advice would help a lot.

  If the new hard drive does not work, then the problem is on the motherboard. Your description of symptoms indicates a power supply or motherboard failure. Contact Dell technical support for repair or replacement. MS - MVP - Elephant Boy computers - don't panic!

• Problem with drive blu - Ray and Hulu plus.

  On my TV I get the first screen of Hulu - more, but is unable to play the video. Get error 5003. No problem with Netflix or YouTube. Use the activation code. Impossible to get a sign in screen t.v. for hulu-plus I can see it on my iPad.

  Hi Twolips41! Thanks for the post. Please try the steps listed in this article , and then try to connect to Hulu Plus still.

  If my post answered your question, please mark it as "Accept as a Solution."

  http://bit.LY/win-4k

• Serious problem with driver i810 Equium A100-306

  I have a new Equium A100-306 and I try to install two different Linux distributions:
  10.1 (x86_64) SUSE and BlueWhite64, but in both cases, I met the same problem:
  When you restart the Xserver, the computer stops responding.

  I used the i810.
  This is not the case with the vesa driver.

  lspci reports:
  00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
  00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
  View 00:02.1 controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)

  Hello flora

  Before you wait here for a long time trial learn more about Toshiba Linux pages:
  http://www.Linux-laptop.NET/Toshiba.html
  http://Linux.Toshiba-DME.co.jp/Linux/index.htm
  http://newsletter.toshiba-tro.de/main/index.html

  Good luck!

• I use a computer laptop gateway t-series and have problems with driver installation

  Original title: driver installation problems

  I was running a computer laptop gateway t-series that has windows vista installed. I uninstalled vista and installed xp pro on a disc borrowed from a friend.i did not know at the time where the drivers must be installed separately. Not only that, reinstall drive was from dell. my friend has a dell computer. the xp installation went well but I don't know how to proceed with the installation of the required drivers. you have any suggestions on what I can do?

  Hi Speete66,

  ·         What is the exact model of the laptop?

  Visit this link to download the drivers for Gateway Laptop:

   

  http://support.gateway.com/support/drivers/ddaStepMain.asp

  You can also see the following article in the Microsoft Knowledge Base for more information about hardware device drivers:

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

   

  Information about the hardware devices for Windows XP drivers

  http://support.Microsoft.com/kb/319908

  Let us know if this information useful.

• problem with driver igdkmd32.sys can it be replaced

  While doing some maintenance on my PC (Acer 5720), I stumbled on "Driver Igdkmd32.sys slows down Pc" or something of simialar how can I solve this problem?

  previous attempts to solve the problem have confused me, I fear I can make matters worse unless I can find a solution not too technical.

  Hi Blot,

  -What is the exact error message that you get on your computer?
  -When exactly you receive this error?

  This file is linked to display drivers. This error could be due to corruption, the computer display drivers.
  
  Method 1: uninstall and install display drivers.
  (A) here is the link to download the correct drivers for your laptop. Download the drivers.
  http://support.Acer.com/us/en/product/default.aspx?tab=1&modelId=548
  (B) follow the below articles for how to uninstall and install the drivers from Device Manager.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Method 2: try to clean boot
  I suggest you perform the cleanup starts, and then download and install the update from the following link.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 of section of boot KB929135 to the computer in normal mode.

  Method 3: run a full scan of service on your system.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection. For a real-time protection that helps you keep your home or small office PC against viruses, spyware and other malicious software, download Microsoft Security Essentials.

  I hope this information helps you!

• Device base system & coprocessor problem with driver Windows 7 - Pavilion dv9720us

  I have a HP Pavilion dv9720us which was very glitch with Vista 32 bit.  After saving all on an external hard drive from Seagate Replica, I did a clean install of Windows 7 64-bit.  Everything seems to work, but I get error messages stating that the x 2 Base system device is not working because it doesn't have the correct driver, the coprocessor is also mentioned as not having not the correct driver.  All 3 of these devices are listed in the other devices category in Device Manager.   In addition, my laptop has 4 GB of RAM and still Windows 7 recognizes only 2 GB.  Help!  I deliberately enhanced to reduce the glitchy Vista answers. I could go on Windows 7 32 bit, but I don't know who's going to solve all my problems.

  Thank you very much!

  Kathy

  Remove your Ram and install it again.

  Notes:

  1. ensure that, then you have no battery or ac adapter connected to your laptop.

  2 Manufacter installed in this model 2048 MB of Ram (2 GB), so if you have not added 2 GB on your own all is ok.

  There will always be problems and your really have 4 GB:

  You check Ram with Memtest86 + or GoldMemory. Just burn it on CD *.iso file and run the test. You may need to change the boot sequence in the Bios (to get the BIOS press F10 boot).

  Message edited by Daniel_Potyrala on 10/30/2009 12:57

• Problem with driver

  My system often hangs during startup and whenever I have to search for solutions to windows problems and solutions it tells me that it is a driver problem. He told me to look in the event viewer and find the bucket from the fault to determine the device that is causing the problem. I went and found this:

  fault bucket 0x50_nvlddmkm. CNvDispChannelDmaHal::pushCmdDat + 12, type 0

  Does that mean something to someone? I tried a search on the forums and come up with no results. Would appreciate any help.

  James

  Hello

  Bug_Check BCCode: 50 0 x 00000050

  Update the Nvidia video driver:

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  -----------------------------------------------------------

  If additional troubleshooting is required:

  For information on using BlueScreenView and MyEventViewer to troubleshoot Bluescreens see methods
  stated in this thread - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  -------------------------------------------------------------

  References to Vista also apply to Windows 7.

  Have you recently added any hardware? Have you updated any drivers just before this started? (Check
  Panel configuration-updates of Windows to see if all drivers have been updated it there all the time it started)
  Main likely culprits are video driver, other great drivers, memory and antivirus/antispyware/security
  products could be at fault as well as reader questions.

  Use the troubleshooter below and refer to the following message to drivers and memory when you get to
  These sections and then back to the resolution of the problems according to the needs.

  BCCode: 50 0 x 00000050

  Cause

  The BCCode 50 usually occurs after the installation of the installation of a faulty material or failure of
  material (usually associated with defective RAM, either main memory, L2 RAM or RAM video cache).

  Another common cause is a defective system service installation.

  Antivirus software can also trigger this error, as can a corrupted NTFS volume.

  Solve the problem

  Solve a defective hardware problem: If the material has been added to the system recently, remove it to see
  If the error recurs. If the hardware failure existing, remove or replace the faulty component. You must run
  Diagnostics of material provided by the manufacturer of the system. For more information about these procedures, see the owner
  Manual for your computer.

  Fix a defective system service: Disable the service and confirm that this resolves the error. If so,.
  Contact the manufacturer of the system service on a possible update. If the error occurs during the system
  startup, restart your computer, and then press F8 at the menu character mode that displays the operating system
  choice. In the Windows Advanced Options menu that results, select thelast known good Configuration
  option. This option is most effective when a pilot or a service is added at a time.

  Solve a problem of antivirus software: Disable the program and confirm that this resolves the error. If she
  is the case, contact the manufacturer of the program about a possible update.

  Fix a corrupted NTFS volume: Run Chkdsk /f /r to detect and repair disk errors. You must
  Restart the system before the start of the analysis of disk on a system partition. If the SCSI hard disk, check for
  problems between the SCSI controller and the drive.

  Finally, check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the error. Disable the cache in memory of the BIOS might also resolve it.
  
  BCCode: 50 0 x 00000050<-- read="" this="">
  * 1095.html? order = votes http://www.faultwire.com/solutions-fatal_error/page-fault-in-NONPAGED-Area-0x00000050-

  ------------------------------------------------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Problem with drive for a month, no VM from

  I have the player from vmware for two years.

  My system is windows 7 64 bit, latest updates installed.

  But since two months, out of the blue, I can't start virtual machines.

  I always get the well-known message "cannot connect to the authorization service", DURING its execution.

  I reinstalled the player several times, even with UAC disabled, created another user account, run as administrator, disabled an anti virus, again, is not able to boot virtual machines more (create new results in a blackscreen as soon as it arrives at the start-up phase)...

  Does anyone here know a solution except reinstalling the entire system, hoping to recover up to the race?

  I am now at my limits in terms of knowledge...

  I am posting this in the article pro workstation where the problem also occurs with the current installation of the workstation 12.

  DIFFICULTY:

  Uninstalled Kaspersky.

  Repair the installation of VMware.

  Restarted

  Reinstalled Kaspersky (latest Version)

  This problem seems to come from kaspersky himself.

  Like other software also cannot open a socket more (access error), out of the blue, from one day to the other, I had a strong suspicion about Kaspersky.

  The problem comes from a problematic network driver, which has been resolved by r: reinstall the driver around and B: also reinstall Kaspersky & repair VMware, so the hooks of both network driver work again. (Such as Kaspersky whitelists VMWare automatically)

  Thanks for your patience with me.