problem with drive Intel HD 520 - bad resolution

Similar Questions

• Problems with drive HARD Toshiba MK1234GSX

  Hello

  I have an Acer with a secondary HD TOSHIBA MK1234GSX 9920.
  Since I installed Windows 7, I have problems with the HD.
  Upon restart, the HD is considered as having problems with windows: when I look in device management, I have this message "Windows has stopped this device cause it has problems. (Code 43) »
  I did a full scan (chkdsk), but no not found errors.
  If I turn off the HD, reactivate and restart, sometimes I can access the HD which works perfectly.
  Does anyone have an idea on this?
  Thank you.

  PS: Sorry for my English :)

  CHKDSK is not good to test a HARD drive for bad sectors, its only good when looking for errors of the filesystem (FAT32 or NTFS).

  Test the hard drive to find errors using DFT.
  DFT download: http://www.hitachigst.com/hdd/support/download.htm#DFT

  Download the ISO file and burn it to a CD - R disc (there is also a version on disk if it's easier).
  If you don't know how to burn an ISO file, read this guide: http://www.petri.co.il/how_to_write_iso_files_to_cd.htm
  Restart your laptop and boot from the disc of DFT.
  Choose the 'Advanced' test and let it run (it may take an hour or two).
  If you see a message in red box, the HARD drive is faulty.
  An error code 0 x 70 means there are bad sectors and the HARD drive needs to be replaced.

• Someone at - he had or having problems with getting nVidia NVS 450 working resolution?

  Hi all

  We got a new C20 with a nvidia NVS 450 card - and a $ monitor. The C20 has Windows 7 preinstalled; the out-of-the-box resolution is 640 x 480 and we couldn't make it go higher than that! The $ and the video card are connected via the DisplayPort cable that came with the unit. After you have reinstalled the video card driver that comes with the unit (on a CD containing drivers for Windows and Linux), we could never get to go beyond 640 x 480 resolution. We left thinking that it must be a quirk with Windows 7. We were going to install Linux on the C20 anyway, so we moved on this.

  We installed Fedora 14 (64-bit) install the video driver nvidia who was on the CD and cannot get the display resolution greater than 640 x 480. After a few days of tests n errors referring to various online forums, we have successful get resolution up to 800 x 600, but not the expected 1900 - something resolution the $ and video card holders.

  Someone at - he had problems with getting the resolution of the video card to work? If so, were you able to solve the problem? We thought we would start here instead to call Lenovo support first, because usually technical questions, we get smarter than over-the-phone responses. Also, waiting for answers on a forum is less frustrating than the vote by phone.

  Chris

  Thank you for your response.

  I had the chance to get their hands on another monitor, and when I plugged that, I got the full resolution. After a lot of testing, I decided that it was a faulty monitor and it had nothing to do with the video card. I finally got a replacement screen for the one who wasn't giving me the full resolution.

  Subsequently, I went ahead and got the latest drivers nvidia on their Web site. Everything works fine now.

• Problem with T500 Intel 5300 AGN WiFi fixed...

  I finally found the solution to my problem today, and I write this information in the hopes that someone can verify in their environment, what I found in mine.  Also in the hope that it will save someone else the weeks of effort it took resolve.

  To summarize, my problem was that I was able to stream audio or video from my local network or from the internet without losing connectivity frequently or permanently.  This problem started when several months ago I updated my laptop for Win 7 Professional of Vista Business.  I don't meet with the problem in Vista.

  Today, I have determined that the problem is that I am under mixed mode on my LAN that is apparently supported by Win 7 for the Intel 5300 driver.  My router is D - Link DIR-655, which is a 802.11n router can be configured for mixed mode support.  I'm running that he configured for support because my wife's cell phone supports n and g as g.  I booted up my laptop today and I began an audio stream from my server and to my surprise it worked perfectly, just as it should.  I listened for a while and all of a sudden the music started to jump.  I noticed that my wife had started just his cell phone around the same time the jump began.  On a long shot, I went to the advanced configuration of the 5300 and disabled 802.11n support forcing them to disconnect and reconnect to 54 Mbps.  This action restored my audio stream immediately and I progressed to test several LAN and WAN connectivity actions (browser, e-mail, etc.) which previously guaranteed a discontinuity in the flow.  Everything continued to work exactly as you would expect.

  I feel that the problem is with the driver 5300 rather than my router because to solve the problem, I have disabled 802.11n on the 5300, not on the router.  The D-Link still works in mixed g/n mode 802.11.  Also, I have a laptop Lenovo T61, which also has a good Intel WiFi AGN adapter to a different model.  This laptop works in n mode with no connection problems, either via the same router D-Link.

  I hope that someone else on this forum allows to reproduce my results in their LAN/WAN environment to confirm that there is a problem with the driver Win 7 currently available for the 5300.  Thanks to Lenovo technicians, who spent several hours on the phone with me and even sent me a new adapter 5300 at a time, thinking that maybe the problem.

  Okay, more than 24 hours now without any problems, 2.4 ghz and full rate of 270/300.  As with the GSM card, I tried the latest vista driver intel 5300 and poof, no problem loading.

  I decided to do so after testing with some dual-band routers.  I noticed that it worked well on 5 GHz, but if it is locked at 2.4 it had problems with all routers.  It also worked well with dlink adapter USB N on 2.4 ghz.

  Since he had worked in vista with 2.4 ghz, I decided to try this driver and was able to put all the settings back to full (power transmission, optimizations, etc.).

  13.0.0.107? seems to have a bug of driver at 2.4 ghz.  The exact version is 12.4.4.5.  So far I have found no side effects (except without freezes or crashes on the 5300).

  So, hope this works for others, if all goes well, next version of the driver it will solve, but mine works fine for now.

  -j

• HP 255 G4: Problem with Driver Usb

  Hi, I have a problem with my HP laptop. Two usb ports do not work because it is not the correct driver.

  Help, please!

  [Personal information]

  Product: M9T13EA #ABZ

  Good bye

  This problem is really stubborn...

  OK, time to pull out the artillery heavy.

  Download and install both of these drivers and reboot and see if that takes care of the issue.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7834528 & swItemId = ob_154066_1 & swEnvOid = 4059

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943835 & swItemId = ob_133037_1 & swEnvOid = 4059 #tab1

• Satellite P100-221: problem with driver battery composite microsoft

  Hello

  I have problem with my satellite p100-221! A few days ago I had problems with my audio driver (audio conexant high definition), after starting it was indicates that the pilot of his failed to initialize, I reinstaleed this driver several times and at last it was working OK, but I noticed that windows does not see the battery.

  The small cell in the status bar disappeared and I can not say for how long can I use laptop with battery. Laptop works as if it is connected to the AC. In the Device Manager appeared an exclamation on the battery composite microsoft.

  I tried to renew the drivers but nothing. I deleted combatt.sys and cmbatt.sys in windows\system32\drivers but they appear again. I started in safe mode deleted, but after normal start, they do not appear. I also deleted them in Device Manager, and after start-up, this device did not and do not ask me to install the drivers.

  What can I do?

  Hello

  I noticed that you did a lot of complex changes to your device. You deleted some files, update drivers, etc..
  I guess that your operating system has been enough installed and worked properly.
  Windows XP supports a system restore tool. This tool allows you to roll back the OS to the beginning.
  In my opinion, you should try to use this option. Maybe he'll bring your laptop at the time where everything worked correctly.

• Problem with driver with Agilent 6031 A feeding

  Hello and goodmorning,

  I tried to develop my first application of cvi in which I need to use a power supply (model Agilent 6031 A). I first use direct command of GPIB and I managed to make it work, but with some difficulty, due to the fact that sometimes orders are missed.

  So I downloaded the driver from the website of OR, and I tried to implement in my code. I found a problem with the first statement, the init it. Here is my code:

  ViPSession InstrumentH;
  
  ...
  
  ...
  ...
  
  All = hp6xxxa_init ("GPIB0::5:INSTR", VI_ON, VI_ON, 1, & InstrumentH);

  After running the above code, I found in 'All' value '-1073807339 "and InstrumentH is equal to NULL."

  Any idea and advice would be much appreciated.

  P. S.

  There is a way, as in Labview, to find the explanation of the error Code?

  Found the problem. Food must be set of SCPI commands on the old controls ARP using "SYST:LANG".

• Problem with Driver Audio (Audio beats) HP Pavilion dv7 6190sl

  Hi guys,.

  my name is Francesco and I have a problem with the sound card in my PC...

  After formatting the PC, I reinstalled all the drivers, even if the installation is successful, I can't hear sound from my pc...

  Unfortunately, I deleted when formatting the disk that contains all drivers... (HP_Recovery)...

  You have a solution?

  Thanks, Francesco!

  Hello

  Open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select Properties.  Click the driver tab and then click on "update driver".  Select "Browse my computer for driver software", then "Let Me pick from a list of drivers for devices on my computer.  "High definition Audio Device" left click once to highlight, then click the next button to install it.

  This makes all the difference?

  Kind regards

  DP - K

• Problem with drive HARD and Vista install

  Hi all

  A few weeks ago, my Dell Inspiron laptop computer started to freeze. I could boot ok and my desktop wallpaper and icons were all there, but I couldn't run or open anything. I did the Bios tests and my Vista installation disc and told me there was a problem with my hard drive. I wiped it and tried to reinstall vista and that I could see it wasn't working because it took hours and then seems to have stopped again during installation. So I bought a new one and tried to install Vista. everything was going well until it is restarts a second time and I got a black screen with a mouse pointer icon. I had to reinstall it running for about 4 hours, at least an hour of that time which was all that was going on and the hard disk wasn't spinning.

  How long on avg would take to install Vista, if it is running normally?

  is there anything else that might be a problem that would not appear in the repair of Vista or Bios diagnostics?

  Any advice would help a lot.

  If the new hard drive does not work, then the problem is on the motherboard. Your description of symptoms indicates a power supply or motherboard failure. Contact Dell technical support for repair or replacement. MS - MVP - Elephant Boy computers - don't panic!

• R.620 with two INTEL X 520 Dual Port 10 GB DA / SFP +.

  We have R620s running for our VMware ESXi environment. Currently, each server has an Intel x 520 with sfp + ports 10 GB (2) and (2) gig ethernet ports. Each server also has a Broadcom 4 gig ethernet card port. Can I exchange the Broadcom card on each server with a different Intel x 520, so that each server has ports sfp + 10 GB (4) and (4) gig ethernet ports?

  Thank you.

  Hello

  jmartinich

  Ports sfp + 10 GB Intel x 520 with (2) and (2), gig ethernet ports

  Which resembles the daughterboard X 520/I350 network. You have only a NDC slot in the system, only one of those can take place. I do not show a similar adapter PCIe version.

  If you have 2 PCIe 3 slot CPU configuration while you might add just another X 520 dual port. If you have a PCIe 2 connector configuration so I am not all ports that you are wanting to get a valid population.

  Thank you

• Problem with drive blu - Ray and Hulu plus.

  On my TV I get the first screen of Hulu - more, but is unable to play the video. Get error 5003. No problem with Netflix or YouTube. Use the activation code. Impossible to get a sign in screen t.v. for hulu-plus I can see it on my iPad.

  Hi Twolips41! Thanks for the post. Please try the steps listed in this article , and then try to connect to Hulu Plus still.

  If my post answered your question, please mark it as "Accept as a Solution."

  http://bit.LY/win-4k

• Problem with Aspire-e1 - 571g very bad!

  MY pc:

  i5 - 3230 m 2, 6hgz with turbo booost

  710 M 1 GB Vram GeForce

  4 GB ram DDR3
  750 GB HARD drive

  HI guys,.

  I have this pc already in a few months, but in the last two years, I have a very worryingproblem. When I play a game, all of a sudden the game (no matter what type, anyone...) begins to run I bit slowly, and happens at the point where the fan, like gives a boost to a will and while the fan, that's how the problem persists. It doesn't stop when the fan gives fresh impetus and goes back to normal. The fps are for example in my 20s 30 but when this problem occurs he cuts up to 15, 13, 10, 9... !!! This problem occurs with games online (BF3) but also with the normal games...

  Can someone help me?

  You must install additional software to monitor the temperature of the system - the GPU/CPU temperature.

  Your problem is caused by overheating. To fix it, the simplest method is to buy a cooling pad. It will reduce the temperature to ~ 10. Your laptop is a middle class "multimedia". It is not designed to load heavy/games. I have 1 single fan and cooling system is not suitable for playing games.

  You can try MSI Afterburner and a cap of fps for your games - this will reduce the load. Plaing also try the games in lower resolution/settings. It allows you also to the temperature of the gpu too in one of the corners of your game. This way, you will see when the temperature becomes high then you can stop the game to avoid damaging the system. 80 c temperatures are bad... and you'll probably get a way higher than that.

• Serious problem with driver i810 Equium A100-306

  I have a new Equium A100-306 and I try to install two different Linux distributions:
  10.1 (x86_64) SUSE and BlueWhite64, but in both cases, I met the same problem:
  When you restart the Xserver, the computer stops responding.

  I used the i810.
  This is not the case with the vesa driver.

  lspci reports:
  00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
  00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
  View 00:02.1 controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)

  Hello flora

  Before you wait here for a long time trial learn more about Toshiba Linux pages:
  http://www.Linux-laptop.NET/Toshiba.html
  http://Linux.Toshiba-DME.co.jp/Linux/index.htm
  http://newsletter.toshiba-tro.de/main/index.html

  Good luck!

• Problem with graphics Intel HD 4000 on Windows 10

  Hello world

  I have Aspire P3 171 and you have upgraded to Windows 10. Everything looks OK, except the Intel HD Graphics 4000 display driver disabled by windows, so I can't control the brightness of the display at all. I got in touch with someone from Intel support, but he said:

  Hi LeoMS,

  I was able to take stock of ESS; everything seems good. It seems to be a bizarre case with your laptop. I suggest to try with you computer manufacturer driver. Manufacturers to customize our drivers to their laptop settings. If the problem persists, contact Acer and maintenance request.

  Kind regards
  Mike C

  I appreciate if anyone can help.

  Thank you in advance.

  Kind regards

  Leo MS

  Sleep, hibernate does not...

  Try this

  key of the Windows logo + x

  Choose command line (admin)

  type

  powercfg-h on

  output

  reset

  then

  key of the Windows logo + x

  power options

  modify the parameters of the plan

  change advanced power settings

  check under battery - critical action battery and low battery if Hibernate is listed as action

  on power options - choose what the power button - change settings that are currently unavailable - check if quick launch is checked

• Problem with driver

  My system often hangs during startup and whenever I have to search for solutions to windows problems and solutions it tells me that it is a driver problem. He told me to look in the event viewer and find the bucket from the fault to determine the device that is causing the problem. I went and found this:

  fault bucket 0x50_nvlddmkm. CNvDispChannelDmaHal::pushCmdDat + 12, type 0

  Does that mean something to someone? I tried a search on the forums and come up with no results. Would appreciate any help.

  James

  Hello

  Bug_Check BCCode: 50 0 x 00000050

  Update the Nvidia video driver:

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  -----------------------------------------------------------

  If additional troubleshooting is required:

  For information on using BlueScreenView and MyEventViewer to troubleshoot Bluescreens see methods
  stated in this thread - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  -------------------------------------------------------------

  References to Vista also apply to Windows 7.

  Have you recently added any hardware? Have you updated any drivers just before this started? (Check
  Panel configuration-updates of Windows to see if all drivers have been updated it there all the time it started)
  Main likely culprits are video driver, other great drivers, memory and antivirus/antispyware/security
  products could be at fault as well as reader questions.

  Use the troubleshooter below and refer to the following message to drivers and memory when you get to
  These sections and then back to the resolution of the problems according to the needs.

  BCCode: 50 0 x 00000050

  Cause

  The BCCode 50 usually occurs after the installation of the installation of a faulty material or failure of
  material (usually associated with defective RAM, either main memory, L2 RAM or RAM video cache).

  Another common cause is a defective system service installation.

  Antivirus software can also trigger this error, as can a corrupted NTFS volume.

  Solve the problem

  Solve a defective hardware problem: If the material has been added to the system recently, remove it to see
  If the error recurs. If the hardware failure existing, remove or replace the faulty component. You must run
  Diagnostics of material provided by the manufacturer of the system. For more information about these procedures, see the owner
  Manual for your computer.

  Fix a defective system service: Disable the service and confirm that this resolves the error. If so,.
  Contact the manufacturer of the system service on a possible update. If the error occurs during the system
  startup, restart your computer, and then press F8 at the menu character mode that displays the operating system
  choice. In the Windows Advanced Options menu that results, select thelast known good Configuration
  option. This option is most effective when a pilot or a service is added at a time.

  Solve a problem of antivirus software: Disable the program and confirm that this resolves the error. If she
  is the case, contact the manufacturer of the program about a possible update.

  Fix a corrupted NTFS volume: Run Chkdsk /f /r to detect and repair disk errors. You must
  Restart the system before the start of the analysis of disk on a system partition. If the SCSI hard disk, check for
  problems between the SCSI controller and the drive.

  Finally, check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the error. Disable the cache in memory of the BIOS might also resolve it.
  
  BCCode: 50 0 x 00000050<-- read="" this="">
  * 1095.html? order = votes http://www.faultwire.com/solutions-fatal_error/page-fault-in-NONPAGED-Area-0x00000050-

  ------------------------------------------------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.