Problem with file listener

Similar Questions

• Problems with file extensions, Vista is slow and crashes

  Salvation of problems with file extensions...   My computer is very slow and is stuck...

  Hello

  Use the startup clean and other methods to try to determine the cause of and correct problems.

  -----------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• I have a problem with file compression and then not be able to extract their share at a later date

  original title: file compression

  I am running Vista Home Premium on my laptop. I have problems with file compression and then not be able to extract their share at a later date. For example, I sent a file compressed to my instructor and she pointed out that she had a .zipx extension and the fact that she was unable to extract the files of ranking. Can someone help me with this problem?

  Hello

  1. do you have a third party compression/extraction of software installed on your machine?
  2. do you get an error message when you try to extract the files?
  3. is the relevant question for the particular file type?
  4. don't you make changes to your computer before the problem?

  Follow the steps and check if they help.

  Step 1:

  Open zip files is to open the folder and drag the content to another folder.

  See article:
  Compress and uncompress files (zip files)

  Step 2:

  If you have a third party software to Compress/decompress, I'd Uninstall it employs the way Windows compression and decompression of files/folders and see if they help.

• Problem with the listening Service: Long delay beginning listener, intermittent connections

  I have problems to connect to my Oracle database.  I don't know what was the cause, but now when I connect to a database that has been working well for the past two years, I usually get an ORA-12541 error.

  I run lsnrctl status on the server and get a prinout like this:

  Copyright (c) 1991, 2010, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=dqaswn02) (PORT = 1521)))
  AMT-12541: TNS:no listener
  AMT-12560: TNS:protocol adapter error
  AMT-00511: no listener
  Windows 64-bit error: 61: unknown error
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))
  AMT-12541: TNS:no listener
  AMT-12560: TNS:protocol adapter error
  AMT-00511: no listener
  Windows 64-bit error: 2: no such file or directory

  I also tried to manually stop the service through services.msc, then by restarting via lsnrctl start, but when I do this I get a very long delay (10 + minutes) before he comes back with something like:

  TNS-01153: failed to process the string: 0i ≈ ♥
  

  I'm quite lost as to what is wrong.  I've been messing around with listener.ora, but I don't see anything difficult in there.  Here's a copy:

  listener.ora # Network Configuration file: E:\app\myc0714\product\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora
  # Generated by Oracle configuration tools.

  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = CLRExtProc)
  (ORACLE_HOME = E:\app\myc0714\product\11.2.0\dbhome_1)
  (= Extproc PROGRAM)
  (ENVS = "EXTPROC_DLLS=ONLY:E:\app\myc0714\product\11.2.0\dbhome_1\BIN\OraClr11.dll")
  )
  )

  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = dqaswn02) (PORT = 1521))
  )
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  )
  )

  # ADR_BASE_LISTENER = E:\app\myc0714
  LOG_FILE_LISTENER = LISTEN PORT
  TRACE_LEVEL_LISTENER = SUPPORT
  TRACE_FILE_LISTENER = LISTEN PORT

  A few times during that time, I was able to connect to the server, via sqlplus, however, it took 10 minutes before the connection is online.  Once I'm connected, I can ask my paintings as expected, but I need an application to connect.

  If anyone has any ideas on what could be the problem, please let me know.
  

  In fact, there was another thing, I changed when I finally got it works, although I don't know if it was related or not.  In my folder with my track logs, I had a huge (> 4 GB) listener.log file.  I deleted this file right before that I ran the command netsh command to reset and then restarted.  This file was also a bit special, because it had not been updated since around the time that I first encountered this problem.  It seems to be updated on a minute by minute basis, now that I've removed the old.  Is there a problem with this file becomes too big?  My drive was not out of space, but it is very curious that this stopped file update on the same day as when I started having the problem and now works properly again.  I wish I had noted the exact time until I deleted it.

  Link:

  Problem of Listener.log & #8211; large file | Obtained & #039; s Blog

• Satellite M645 - problem with files from Ipod

  I recently had two other notebooks die on me so why I got a brand new Toshiba Satellite M645.
  I have two ipods with music on them from one of the computers.
  When we follow the ways to transfer music on my new computer that I will meet different problems with each of them.

  The first problem is on my video Ipod.
  After clicking on the hidden folders and etc when I find the music file, it shows the files for everything except music.
  Here is the list of files, it gives me

  Calendards
  contacts
  garbage
  NISAM
  Notes
  recycler
  ground
  USB 2.0 driver
  zurim

  If someone could help me with this, or maybe send me to another forum or page that might help me.

  My other is an ipod touch.

  And when going to the devices, it rises driver device USB mobile apple instead of an ipod just like my other.
  When you click on it instead of display the files it just go to the properties and has two tabs, general and material.

  Once more if anyone knows how I might be able to get these on my new computer, I would be very grateful

  That has nothing to do with Toshiba but with your Ipod.

  On the other hand; I have an iPhone and the management of the files it s similar iPod.
  All files need iTunes and using iTunes, you can control files and move between computer and ipod

  However, I recommend you to visit the forum for ipod problems

• Problems with file renaming Applescript

  Hello all and thanks in advance! I am currently working on a set of scripts that will work in tandem, and I got everything settled except this little AppleScript. It is essentially supposed to rename all the files in a given location at just the last two "words" in a folder (which are essentially the UID) and I used it several times in the past with success, but now that I have removed the guests 'choose folder' and instead of giving a specific path, I ran into the question after question. Here is my script up to now:

  Tell application "Finder".

  Repeat with this_folder in "Macintosh HD:Users:Server:Desktop:Test"

  name of the value folder_name this_folder

  Tell me to define the word - folder_name 2 contract

  Tell me to define the word entity - folder_name 1

  Set final_name to contract & "-" & entity

  If not (file final_name) then

  Set the name to this_folder to final_name

  end if

  end repeat

  tell the end

  say

  I'm now see "unable to get the name of \"M\. ' number-1728 name of "M".

  I thought it was a problem with the path at first, so I commented on the remaining elements of and had no problems from there. As I said, this script worked well when there was a prompt "choose a folder '; the only change that has been made is the reference to the file prompt. Thank you once again.

  As a first step, you should have written:

  Repeat by this_folder in the file "Macintosh HD:Users:Server:Desktop:Test"

• Problem with files Cipying

  I was able to copy the 250 GB of files to film a box connected Western Digital Media, but when I try to copy files from a small portable USB key or on the network from a NAS, I get an icon with a cross through hand.

  Any chance someone could let me know what it is and how to work around?

  What USB device you are using and what laptop do you really?

  You have this problem with different USB keys?

• Tecra M5 Sysprep problem with file hdaudbus.sys

  We have a syspreped image, that was created on a Toshiba Tecra M2.

  Our current image works on the following model of machines: -.

  Toshiba Portege 4000
  Toshiba Portge 4010
  Toshiba Portege M100
  Toshiba Portege R100

  Toshiba Tecra M2
  Toshiba Tecra S1

  Toshiba Satellite Pro 6000
  Toshiba Satellite Pro 6100
  ----------------------------------------------------------------------------------

  We should now get the image while you work with the new Toshiba Tecra M5.

  The driver that I have a problem with is HDAUDBUS.sys

  When the machine starts first, and almost before it even tries to build some itsself, it says it cannot find the file 'hdaudbus.sys' and it seems that it is in the D: research, if you navigate to system32\drivers, then the driver is installed correctly, but I can't seem to automate this process.

  I copied all required driver files and inf.
  I filled the sysprep.inf (under the heading "OemPNPDriversPath") file with the driver and the correct path. It made no difference. I also 'DriversSigningPolicy' value 'IGNORE '.
  I have sysprep using the image - pnp, mini installation then close it carefully.

  The question is:-

  (A) I do something wrong, and is there a good way to get windows/sysprep automatically install this driver?

  (B) I have a fix for the problem above, is:--
  Put our sysprep would be the image on the Tecra M5, manually installed ALL of the correct drivers and then re-Sysprep image. The question is, is it OK to do this? (It seems to work)? Or is it not advisable to sysprep image, several times, on different model machines?

  Any advice would be appreciated!

  Thank you

  Hello Mark

  Your ad is very interesting, but I don't really know which should help you. As you can see that he is user in the forum and you'll be lucky if anyone can tell you anything about your problem.

  This file is Microsoft one and try to check in a Microsoft support page, if there is solution available.

  In any case good luck!

• What are the Causes of 'loop Hang"problem with file i/o when using timed multiple loops on one OR cRIO-9012?

  Normal 0 false false false fr X-NONE X-NONE / * Style Definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

  I experienced a problem with an application. I think I've isolated the problem in the "Timed loop question - Source Code.zip" attached source code. A detailed list of my results are in the attached document "Timed loop detailed question - Results.docx.

  Overview - it seems to be closely related to the IO files and the use of "Timed loops" on the OR cRIO-9012

  1. If I activate the e/s in two loops, then two loops crash simultaneously

  2. If I activate only the e/s in a loop, then only this loop crashes

  3. If I activate the e/s in two loops and make a 'While' loop earrings, then it don't crash

  4. If it is wrote nothing in the file I/o, then it don't crash

  5. If the reference to the file is left open instead of opening and closing on each call, so it don't crash

  6. If I try to run it on "My Computer", then it don't crash

  7. If the IO is only activated in a loop and programmed to wait for one second between the file access, then it always crashes

  In my real application, any given row is only writing (at least) once a minute, but I couldn't still my application to plant within a period of 24 hours by writing a single error of a single loop once per minute, with a low CPU use. It was the impulse to test the seventh point above.

  It seems that the best solution was to open the reference to the file and let it open. I think it is a good practice in general and I'll do the update in the application. This should solve the problem, but it is very difficult to verify this due to the sporadic nature of the question. As such, I'd like to understand what was causing the problem so I can verify that it was fixed. So far, my attempts to create a single, coherent theory able to explain all aspects of this issue have failed.

  I just wanted to know at all that there has been a request for corrective action (CAR #214156) has filed for this issue to be fixed in a future release. This seems to be a problem with the VxWorks operating system, we use in real time. We have additional cRIO chassis which have a Pharlap OS where it does not work. For now, you can search for this CAR ID notes to see if this problem has been resolved for publication in the future.

  Currently, there are two solutions, we have identified for this problem:

  1. open the file before the loop and close it after. (recommended)
  2 perform file i/o in a normal loop and transfer data to a queue.

• Problem with file JAD

  Hello

  I have a problem with the jad file.

  I get this error when trying to install the key file:

  manifest error or application descriptor not valid
  

  Here's the JAD file:

  MIDlet-Name: SinexiaMobile
  MIDlet-Version: 7.8
  MIDlet-Vendor: Sinexia
  MIDlet-Description: SinexiaMobile
  MIDlet-Jar-Size: 0
  RIM-COD-URL-1: SinexiaMobile.cod
  RIM-COD-Size-1: 81320
  

  Mounting of cod with alx file via BB Desktop Manager job very well, but I need solution to install via a web browser.

  Thank you

  Hello

  Problem solved changing the server mime type:

  Text/VND. Sun.J2ME.app - Descriptor-> jad file

  application/vnd. RIM. COD-> cod file

  Thank you

• Problem of file listener...

  Hello

  I use the file listener in my application, and with it, I listen to the incoming Pin messages. I get the success of read the message subject and body (with headset). I have to take a decision according to the body of the message

  but he throws exception (net.rim.device.api.controlled Acess Exception: access to attach to this app) when I try to push the screen...

  I have given all permission to the application...

  Please suggest...

  Are you trying to push the screen in the listener itself? Is this a global screen? The listener is not directly part of your application, it runs in userspace of the messages application, so you will need to use a global listener or another mechanism to get into your applications user space to push the screen.

• Problem with files first download as contributor

  Hello.

  I'm about to start working with Fotolia and Adobe Stock. Have registered today and I tried to download some vectors. I did the zip file with eps and jpeg, because the instructions to me and tried to download it. And you know what? Adobe Stock rejected him because "he is not a valid file type. What is a problem?

  It when get this kind of problem is usually due to a problem with the preview jpeg file. It is important that meet you the specifications of file and the jpeg preview is at least 5000 x 3000 pixels. You can find more info on vector specifications of file on this link: download and manage your content

  If your file meets these requirements you know, please let me know and I will dig deeper into that for you.

  Kind regards

  Mat Hayward

• Problem with file download in folio Builder

  We have problems with downloading files in the folio and generator with folios of the DPS Dashboard update. In both cases, the process is very slow and then is interrupted before the end. could you please tell? Thank you.

  https://status.publish.Adobe.com/?p=955

  Service was restored after the team ops spilled to the cluster healthy.  PAHO will continue to monitor the system.

• Problem with File Explorer

  In Windows 8, I am unable to create a new file with File Explorer.  All that happens is the little circle rises, and finally, it will switch to "not responding".  This happens directly in the Explorer file and in Word and Excel when I try to use Save as. This s a new installation and I had only a week. Nothing about elements default ordinary has been loaded.

  Hello

  Please, try the command SFC/scannow in the administration command prompt and see if that helps.
  Hope this helps, good luck :)

• Problems with files of Point high vector (anchors)

  anyone else having major performance issues while working in files with a large NUMBER of vector points / anchor? I have a very fast system (Intel i7 5960 x 8core running up to 4.7 Ghz w / Turbo Boost w / 32 GB of Corsair Memory & running on dual SSD pro Samsung 850 s.) Just like a Nvidea GTX card 980) plus all the great execution files, but get a file with a lot of anchor points and BAM... slows down to a crawl!  Very frustrating!

  Thanks for any idea to help boost performance or work with files of upper anchor point.

  Brett

  Brett,

  When you work with the file that has a lot of vector points. Try to work in mode plotted, if you can and if it works for you. Don't forget with all complex vectors, the screen must redraw which takes the application memory when you move or update the object/drawing. If you try to resize the chart at a size smaller than work with it and then expand to a normal size when you are ready for the final version of the file.

  It can help.

  Thank you

  Scott