Problem with filter BottomN()

Similar Questions

• problem with filter smart collection

  Hello

  I know that this question could be covered widely in various forums, but I can't find what I'm looking for.

  The issue I'm having is that I used the quick Collection folder to temporarily store all the photos that I have edited for printing.  All of a sudden all the photos of this quick collection have broken links (! in the upper right corner).  I found these pictures in the real LR folder and they are fine.  How is that possible?

  instead of fixing all the links in the quick collection, I would like to use a smart collection just find all my photos edited in the original folder that has the tact in links.  However, when you filter for "adjusted photos" the smart collection keeps giving me photos with broken links, probably from my quick collection, not those of the foler.  How do I know the smart collection to search only in one folder I want?

  I hope that this logic... I can clarify if necessary.  Thank you!

  Hi, you seem to be confused about the importance of brands of exclamation noticed on the images.

  This means that the catalog as a whole has lost track of these images.

  The most likely reason is that they have been moved to another location by using the operating system or one application other than Lightroom or they are on an external hard drive where the assigned drive letter changed (a Windows problem).

  I do not understand your comment on find them in the "real" LR folder

  Images are not stored in Lightroom, either.

  The catalog contain references to the location of your pictures.

  It is these references that are spread over the images showing the exclamation points.

  If the Smart collection has been implemented correctly then it will want to include all the images that have been published for printing, but the Smart collection is SEO information found in the catalogue and so it will include images of which the catalogue has lost track of--exactly as you found it.

  Tony Jay

• anyone having problems with the junk e-mail filter in hotmail or msn Explorer

  anyone having problems with the junk e-mail filter in hotmail or msn Explorer

  Hello

  1. The issue is only with MSN mail?
  2. Have you tried using another web browser and check if you are faced with a similar question?

  Given that the problem is related to MSN I suggest you to contact MSN support for assistance.

  How to contact MSN customer service

  http://support.Microsoft.com/kb/940784

  Check also:

  https://support.MSN.com/default.aspx?&St=1&wfxredirect=1

  http://windowslivehelp.com/product.aspx?ProductID=1

   

  Hope this information is useful.

• problem with tabs and filter the lines of memory cache

  Dear all I have a problem with the oaf page has two tabs under two of them consists of a table and add the button to the row. Second tab, it's a detail of the first tab, which means that each line in the first tab may refer to one or more lines in the second tab, my problem is when I add the line in the first tab and go to the second tab to add lines to this line of the display of the page added all lines not only the matching lines.

  my code:

  1 - controller

  When press Tab of Lot lines (partial action)
  If (goLotsTab".equals (pageContext.getParameter (OAWebBeanConstants.EVENT_PARAM))) {" "}

  String trxLineId = "38";//row.getAttribute("TrxLineId").toString(); "
  AddLotParam serializable [] = {trxLineId};
  am.invokeMethod ("getTrxLot", addLotParam);
  }
  What press Add button lines of lots (partial action)
  If (addLot".equals (pageContext.getParameter (OAWebBeanConstants.EVENT_PARAM))) {" "}
  String trxLineId = "38"; row.getAttribute("TrxLineId").toString ();
  AddLotParam serializable [] = {trxLineId};
  am.invokeMethod ("addTrxLot", addLotParam);
  }

  When press Add a tab line (partial action)
  If (addLine".equals (pageContext.getParameter (OAWebBeanConstants.EVENT_PARAM))) {" "}
  am.invokeMethod ("addLine", params);
  }

  Methods 2 - am

  public void getTrxLot (String pTrxLineId)
  {
  OAViewObject vo = (OAViewObject) getXXSiteLotsVO1 ();
  LinVo OAViewObject = (OAViewObject) getXXSiteLineVO2 ();

  Line linRow = linVo.getFirstFilteredRow ("SelectLineFlag", "Y");
  pTrxLineId = linRow.getAttribute("TrxLineId").toString ();

  If (!) VO.isPreparedForExecution ())
  //{
  try {}
  String existringWhereClause = vo.getWhereClause ();
  vo.setWhereClauseParams (null);
  vo.setWhereClause("trx_line_id=:1");
  vo.setWhereClauseParam (0, (pTrxLineId) Number);
  vo.executeQuery ();
  vo.setWhereClauseParams (null);
  vo.setWhereClause (existringWhereClause);
  }
  catch (Exception exceptionl)
  {
  throw OAException.wrapperException (exceptionl);
  }

  // }
  following line is commented, but I think that it will contribute to the memory of the filter
  cached data to be mapped.

  Rank [] lotRows = vo.getFilteredRows ("TrxLineId1", pTrxLineId);
  }

  /////////////////////////////////////////////////////////////////
  public void addTrxLot (String pTrxLineId)
  {
  OAViewObject vo = (OAViewObject) getXXSiteLotsVO1 ();
  LinVo OAViewObject = (OAViewObject) getXXSiteLineVO2 ();

  Line linRow = linVo.getFirstFilteredRow ("SelectLineFlag", "Y");
  pTrxLineId = linRow.getAttribute("TrxLineId").toString ();

  If (vo.getFetchedRowCount () == 0) {}
  vo.setMaxFetchSize (0);
  // }

  VO. Last();
  VO. Next();
  Line = vo.createRow ();
  row.setAttribute ("TrxLineId", pTrxLineId);
  vo.insertRow (row);
  row.setNewRowState (Row.STATUS_INITIALIZED);
  }

  

  OK, I'll share my latest code using other

  public void createTransaction() {}

  OAViewObjectImpl vo = getXXSiteHeaderVO1();

  If (! vo.isPreparedForExecution ()) {}

  vo.executeQuery ();

  }

  If (vo.getFetchedRowCount () == 0)

  {

  vo.setMaxFetchSize (0);

  }

  String status = "incomplete."

  OADBTransaction txn = (OADBTransaction) getOADBTransaction ();

  • oracle.jbo.domain.Date currentDate = txn.getCurrentUserDate ();

  Line = vo.createRow ();

  row.setAttribute ("TrxStatus", status);

  1. row.setAttribute ("TrxDate", currentDate);

  vo.insertRow (row);

  row.setNewRowState (Row.STATUS_INITIALIZED);

  }

  {} public void addLine (String pTrxHeeaderId)

  OAViewObject vo = (OAViewObject) this.getXXSiteTrxVL1 () .getDestination ();

  VO. Last();

  VO. Next();

  Line = vo.createRow ();

  int linNum = vo.getFetchedRowCount () + 1;

  row.setAttribute ("TrxHeaderId", pTrxHeeaderId);

  row.setAttribute ("LineNum", String.valueOf (linNum));

  row.setAttribute ("SelectLineFlag", "Y");

  vo.insertRow (row);

  row.setNewRowState (Row.STATUS_INITIALIZED);

  }

  Public Sub getTrxLot()

  {

  LinVo OAViewObject = (OAViewObject) this.getXXSiteTrxVL1 () .getDestination ();

  Line linRow = linVo.getFirstFilteredRow ("SelectLineFlag", "Y");

  String pTrxLineId = linRow.getAttribute("TrxLineId").toString ();

  linVo.setCurrentRow (linRow);

  OAViewObject vo = (OAViewObject) this.getXXSiteLineLotsVL1 () .getDestination ();

  }

  Public Sub addTrxLot()

  {

  LinVo OAViewObject = (OAViewObject) this.getXXSiteTrxVL1 () .getDestination ();

  Line linRow = linVo.getFirstFilteredRow ("SelectLineFlag", "Y");

  String pTrxLineId = linRow.getAttribute("TrxLineId").toString ();

  linVo.setCurrentRow (linRow);

  OAViewObject vo = (OAViewObject) this.getXXSiteLineLotsVL1 () .getDestination ();

  VO. Last();

  VO. Next();

  Line = vo.createRow ();

  row.setAttribute ("TrxLineId", pTrxLineId);

  row.setAttribute ("RowKey", new oracle.jbo.domain.Number (1));

  vo.insertRow (row);

  row.setNewRowState (Row.STATUS_INITIALIZED);

  }

• Having a problem with the Gallery of filters, specifically the texture and the other 5 filter filter do not meet the 'OK '.

  Having a problem with the Gallery of filters, specifically the texture and the other 5 filter filter do not meet the 'OK '.

  Go to the Photoshop preferences, then on the performance tab.

  From there please click on advanced settings, change the drawing on 'Basic' mode and uncheck the option for "Open CL" once, then try with a Jpeg file.

• PHOTOSHOP CC - problem with the LIQUIFY filter

  After the last update of Photoshop CC, liquefy filter stop works well

  Is one of my favorite filters, how can I solve this problem?

  It is possible to regress to an earlier version of photoshop CC?

  Hi alexstaffa,

  The problem with the Liquify Filter has been fixed in the last update.

  You can download CC2015.1.1 from this link and install it: keeping up to date of Photoshop

• I have a problem with the Liquify Filter

  I have a problem with the Liquify Filter.

  After you make the corrections in PS 2015.1 release seems to me the area I made the corrections made as if she was overexposed

  I apologize for my English

  Known issue. Adobe work on a fix. No ETA when the fix will happen.

  In the meantime, you have several options, in successive order, based on the convenience of quality of life:

  • Hold down the ALT (Opt on Mac), click and hold the filter in the menu bar > drag on toward the bottom to liquefy > release. This temporarily disables the GPU acceleration. Note that it will take more time for your images to deal with but they will treat as before.
  • Use the 8-bit instead of 16-bit images images.
  • Click Edit > Preferences > Performance and disable your GPU in the upper right, under "Settings of the graphics processor." Note that this will disable the GPU acceleration in all areas in Photoshop; you need to return to reactivate it to other filters.
  • Use a previous version of Photoshop.

• Problems with the radial tool and the gradient filter tool.

  I have suddenly problems with the radial tool and the tool filter degraded.  They are turning to my red while selection that the assets and not with the results of the any adjustments.  It is a new issue and out now where

  Does that help? Note that the tool must be active to see the check box.

  

  In addition, another reason, that you do not see it could be that the toolbar is not displayed. The toolbar display switch is to press the letter T.

• problem with graduated in LR CC filter

  Hello, is that everyone has experienced a problem with the graduated filter tool?

  I just installed the new version of LR CC (on Windows 7 - 64 bit), and when I tried this filter, the left side of tool window is truncated. I do not see the number of values of each.

  Is this a known issue with Adobe?

  Thanks for your help

  This bug has been recognized by Adobe.  See about this in the Adobe official feedback forum: CC with Lightroom: gradient tool setting Panel is too wide in French: can't read the numbers on the right.  There are a couple of workarounds.  In addition, please add your vote and opinion to make it more likely that Adobe will give priority to a solution.

• Problems with the lighting effects filter

  I have problems with the lighting effects filter, I can use it on photographs, but the filter option is inactive on others, advice?

  This filter only works on images of 8 bits, not on 16 bit. Could it be the problem?

• Problem with the radial filter, I can´t see the elliptical marquee

  Hello! I have a problem with the radial filter, I can´t see the edge, the elliptical marquee when I select, the effect so I can´t change the Center or the size. How can I see it again? Thank you

  Press the "H".

• Problem with report filter (security issue)

  Hello
  
  I'm having a problem with a filter on one of my reports. We report a listing all units of the organization. Unity in this report can be clicked to go to B report that shows the details of this unit.
  
  When a user accesses A report, they should be able to see all the units, but if they click on a unit that they are not Member, B report should show no results.
  
  If they click on a unit that they BELONG to one, then the B report should display correctly for them.
  
  I have a session variable that gets their unit number and confirmed that it works.
  
  My filter on report B is:
  The year is invited
  AND
  (Unit is equivalent to / is in NQ_SESSION.) Unit AND is invited)
  
  I'm assuming that this filter only results would show if the user clicks on a unit (in the report) that they belong to. However, what is happening is that if a user clicks on a unit that they belong not to them, it still shows the results in the report B for this unit.
  
  Does anyone have ideas on this one?
  
  My only other option is to use a CASE statement on report with URL GO so it only allows users to click on the units they belong to- but I would rather avoid that because go the URL isn't really open the report in a page that maintains the appearance of the rest of the dashboard.
  
  
  Thank you
  Kevin
  
  Published by: KevinC_VA on April 7, 2009 19:05

  protect this filter - unit is equivalent to / in NQ_SESSION. Unit

  When you click the button filter options, you will see the option for the filter to protect. This limits the filter unchanged after the wick down. I guess your session variable to work properly.

  -Madan

• You have a problem with 6th place with the CAP in ythe filter in photoshop CC2015?

  
  Hi

  I have a problem with the number of places 6 on my Mac 2 in photoshop CC 2015: the number 6 plug won't run right... I ask a question about Adobe helpdesq phone, the creators of witch plugin work not... but no answer!

  and Digital Anarchy give tme he good answer (a big thanks to them) 6 places are sometimes a "dead spot", you need to install a trial version of antoher Plug and after cursed instead number 6 is busy and all the other plugsin run right: according to the response of Digital Anarchy

  "Ah, we've seen this bug before. We do not know why this is happening, this happens on all applications Adobe CC I think, but when some plugins are listed as the 6th plugin in the filters dropdown you get the error you see. This is purely something on side of things Adobe. It's annoying, but the only way around is to remove some plugins, so that the 6th plugin is changed it's order in the list of 5 or lower OR install another plugin (trial version would work fine) which would fall our plugins up to 7 or higher. Sorry, there is no way to change the order of the plugins either. »

  
  

  Samsam
  

  
  

  Hi samar.

  This is a bug experienced with Photoshop CC2015 and the engineering team working on it.

• problem with playing the clash of clans

  I'm having some problems while playing the clash of clans on my 2 mini ipad screen does not seem to meet sometimes as if it was some sort of delay so I have to tap several times in order to use a filter or throw the troops on the battlefield.

  Hi Trinitygr,

  Thanks for posting in the Community Support from Apple! I understand that you are having problems with your iPad screen while playing a game. I like to play games on my iPad and I don't see how this could be a nuisance. I'm happy to offer assistance.

  Are you only had this problem when using the app clash of Clans, or does it happen in all applications? I recommend to start by following the steps described in this article:
  If an application you have installed unexpectedly closes, unresponsive, or does not open

  Take care!

• problems with the firefox search engine

  When using my hotmail email today when I I closed it got stuck with the msn home page, I have managed to recover the firefox home page, but the search is made by BING, I don't want that I want as before google. It seems if be produced since firefox 18 was delivered

  Can any body help to get this back as before

  Try to reset default preferences with the SearchReset extension:

  • https://addons.Mozilla.org/firefox/addon/SearchReset/

  Note that the SearchReset extension runs only once and then uninstalls automatically, so it will not appear on the page "> Firefox Add-ons" (topic: addons).

  You can check the pref browser.search.defaultenginename (s) on the topic: config page to see if it has the value of Google by default.

  If there is a problem with the search through the default value: home page and then try to reset the search engine used on the subject: homepage.

  Reset the pref browser.startup.homepage_override.mstone through the context menu by default on the topic: config page and close and restart Firefox to restore the on: default home page.

  • http://KB.mozillazine.org/about:config
  1. Open the topic: config page through the address bar
  2. Type in the filter bar: mstone
  3. Right-click on the browser.startup.homepage_override.mstone line, and then select: Reset
  4. Close and restart Firefox

  If this did not help, then remove the button Delete the chromeappsstore.sqlite file in the Firefox profile folder and repeat the foregoing.