Problem with Find is close to missing Photos

Similar Questions

• Problem with finding the SmartGlass an Xbox to Store or App Store

  Original title: xbox a smartglass

  I can't find that the smartglass an Xbox on the windows store or the appstore please help

  Hi Ibrahim.

  Please contact Microsoft Community. I understand that you have a problem with finding the SmartGlass an Xbox to Store or App Store. I will surely you help with this.

  You can download Xbox a SmartGlass from the following Windows store link.

  http://apps.Microsoft.com/Windows/en-us/app/Xbox-one-SmartGlass/c3a46cb8-e733-4579-B716-862e123fa831

  For more information you can check the link.

  http://support.Xbox.com/en-us/Xbox-360/apps/SmartGlass-Info

  Hope this information helps. If you need more assistance or information on this question, reply to this message. I'll be happy to help you.

• I've updated to 2015.2 in September and started having problems with freezing while working on the photos. I upgraded my memory from 4 GB to 8 GB and it has disappeared (in most cases); However, I always feel a lot of questions of export of JPEGs (gel) bu

  I've updated to 2015.2 in September and started having problems with freezing while working on the photos. I upgraded my memory from 4 GB to 8 GB and it has disappeared (in most cases); However, I always feel a lot of questions of export of JPEGs (gel) but not tif files? Very frustrating. Tried to install the new updates but my creative cloud is just a blank page?

  Hello

  I think you are referring to the white empty window of CC desktop application.

  Please refer to the threads below where this issue has been addressed:

  Creative cloud is empty window why?

  Cloud Desktop App is empty?

  New application Cloud Creative unusable: it is empty!

  Re: Empty opening creative cloud app

  Kind regards

  Sheena

• Strange problem with find/replace

  I'll have a little strange problem with find/change in InDesign CS4 Mac.

  The document is a data merge.  In the worksheet, there are two fields that contain either a '@' or a '&', depending on the context.  These are just placeholders - the plan was to convert glyphs of the police 'Wingdings 2' after creating the merged document.  We do it this way because we couldn't figure out how to get the glyphs themselves in the .csv file.  Two glyphs are < FO54 > and < FO56 >.

  First I used find/replace to change all the '@' symbols to < FO54 >.  That has worked well. But then when I tried to change the symbols "&" < FO56 >, I got the < FO54 > again instead.  In fact, now I ask what glyph, I get < FO54 >.  Find/replace always normally works for normal text... it of just that he seems to have decided that if I ask a glyph, I get < FO54 >, anything.

  I tried to shut down and restart, but the bug is still there.

  Any thoughts?

  I used the tabs of glyphs in find/replace when I tested it, but what you describe seems to work as well.

• Problems with the Windows on Windows 7 Photo Viewer, cannot open the picture

  Good evening!

  I can't open a few photos that I downloaded from my digital camera's SD card.  They are all in the same folder, and they are all JPEG.  Some of them are open very well, but there are MANY who are not open and I get the message: 'Windows Photo Viewer cannot open this photo because Photo Viewer does not support this file format, or you do not have the latest updates for Photo Viewer. "  As I said, they are all JPEG, as well as the Windows Photo Viewer is already set as my default Photo Viewer.   When I opened the window of the picture viewer I have not been invited for updates.

  I don't understand why some of my photos to shoot to the top of fine and the rest don't pull up at all.   Where will ensure that I have the latest update?  You have any other suggestions?

  Thank you in advance for your help!

  Looks like there are probably good copies elsewhere then... I was worried, you might well have lost some of your photos, and it is always better to access the card and copy and paste the files (and then check that they are ok) before using the software download and the removal from the Board. If the files have been corrupted somehow during the transfer process, they can still be recoverable in respect of the SD card using something like the free version of "recuva" providing that the SD card has not been re-used and previous files overwritten by new material. However, if your sister still photos as well which should not be necessary.

  I don't think this is likely to be a problem with the photo viewer, but let us know when you received that email... all the best - Ric.

• Problem with opening programs of text and photos after the upgrade of computer for Windows 8

  Original title: Photos open in Notepad

  Hello

  Laptop with win 8.

  Recently upgraded XP to win8 with purchased MS DVD.

  All text programs open graphics (pictures) in Irfanview & if I send them WORD show as hieroglyphics jeeperish.

  And all the photos to open Notepad in hieroglyphs jeeperish but if I open them with "Sendto" Irfanview or MS photo editor pictures appear.

  Seems the association went haywire. How can I fix this please?

  8 win in my PC is not that.      .. thanx... .Nick

  Hi Nick,

  Please contact Microsoft Community. I understand that you have a problem with opening the programs of text and pictures after the computer upgrade to Windows 8. I appreciate your efforts to solve this problem, I'll probably help you solve this problem.

  This problem could occur if the default applications are not set correctly.

  I suggest you read the article that will help define the default applications that Windows automatically uses when you open a particular type of file, such as a song, film, photo or Web page.

  Choose the apps Windows uses by default
  http://Windows.Microsoft.com/en-us/Windows-8/choose-Programs-Windows-uses-default

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Problems with the relaunch of the CC Photo account

  Tried to restart my account during my stay abroad (USA), the account now has a problem with the payment and cannot be reactivated (assumed that the monthly rate is due to the weak USD-Euro exchange - please helpP

  Please contact customer service for updating the payment. You can use: http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

• Problems with the VISA series connection (missed the ticks in the data)

  Hello

  I designed a DAQ card with USB connection. The USB connection works in virtual Com Port mode.

  The main vi a while loop. The sampling time is defined by the user and the hand while loop iterates of this time of the sample (for example, 5ms, 10ms or...). Communication of the data is made in the present while loop using VISA read or write tools. Data are stored in global variables so the other could read or change.

  There are screws separate for each part of the DAQ card input analog, digital output and... Each vi has its own time while in a loop which iteration step may be different from the large loop.

  The program works correctly, but there are a lot of ticks of "rate" in the communication of data. I've attached a screenshot of input analog vi. A sine wave is produced with output analog vi and this output is connected to an analog input. As you can see the data transmission has problems.

  This caused several loops work simultaneously? Or communication VISA has problems?

  Thanks in advance.

  The main problem I see with your VI is that you use bytes to the Port which is the wrong thing to use about 99% of the time.  It seems that you are trying to break around 31 bytes and turn them into numbers.  Suppose that at the moment, you check the bytes, a port, you have received only 28 of these bytes.  Some of the variables will find 0 because you have all the data.  But on the next play, you will have the remaining 3 bytes so everything from the.  Now your data package is misaligned.

  I suggest that if you want 31 pieces of information, you just put a constant 31 reading VISA and get rid of bytes to node Port.

  Other advice.  Index table is EXPANDABLE!  You don't need to create 31 copies of the index table and wire a constant to each of them.  Remove a node, and expand the bottom border down that you need.  You don't even have to add all the constants, because by default it will give you index 0, index 1, index 2...

• I have a problem with finding a PnP USB audio device when you search for available audio devices.

  Hello.

  I am building an application that can find a PnP USB audio device and play a tone if the device is connected. I am able to search audio devices using "Sound Device Info.vi" of the lvsound2.llb that comes with labview.

  The vi can find the USB device in good conditions, but there are problems - I'll try to describe 2 scenarios.

  1. the USB device is connected before 'Sound Device Info.vi' is called for the first time.

  In this case, the program can find the USB device. If I unplug it, the device disappears from the list of found audio devices. If I reconnect to the same USB port, it reappears in the list. It's all good.

  If I reconnect it however a new USB port, the device is not found. This is not good.

  2. the USB devices is not connected when 'Sound Device Info.vi' is called for the first time.

  "Sound Device Info.vi" is not able to find the device. Disconnect and reconnect does not make a difference.

  I'm under labview 2012 on windows 7.

  I am running the application as an exe to build.

  I call 'Sound Device Info.vi' as a 'call for reference"and the reference is closed between calls to the vi. I was hoping this would unload the dll used in "Sound Device Info.vi" and would solve the problem, but it didn't.

  Is there a way to reset the information usb labview during execution?

  Concerning

  Stephan.

  Hey Stephan.

  The sounds screws require a DLL located in:

  C:\Program Files (x 86) \National Instruments\LabVIEW 2012\resource\lvsound2.dll

  Internally, LabVIEW uses the DirectX API to enumerate devices. The one caveat is that probe us for devices when loading the DLL. We probe not later. So that it works for Bluetooth, USB, fire wire, etc. devices that can be inserted or removed at any time, you control somehow when this DLL charge and discharge. To do this, please see the following document:

  Dynamically that I can load and unload a DLL in LabVIEW?

  http://digital.NI.com/public.nsf/allkb/77594203D78D12278625729100758BE5

  I would also recommend that you provide a Kudo to this idea:

  Updated library lvsound2 (Sound Input/output Sound live) to support audio devices change on the fly

  http://forums.NI.com/T5/LabVIEW-idea-Exchange/update-the-lvsound2-library-sound-input-sound-output-V...

• problem with find dxdiag

  I can't locate dxdiag, even with i run and search for it, it comes out blank. I also installed the new directX 11 to see if she could fix things, but without success. It's weird, because I could have sworn that I've used it before...

  can someone help me?

  p.s im running vista home pre

  Hello

  Follow these steps to repair/replace damaged/missing system files.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  ======================

  If you need to extract it from the DVD (any DVD of Vista which is even 32 or 64 bit).

  Access files on your Vista installation DVD
  http://www.Vistax64.com/tutorials/86959-access-Vista-install-DVD-files.html

  How to extract system files missing from the DVD of Windows 7/Vista.
  http://blog.NirSoft.NET/2009/09/17/how-to-extract-missing-system-files-from-the-DVD-of-Windows-7vista/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Problem with find/change GREP

  Hi, try to run by default find/replace InDesign AppleScript script to solve many formatting problems in a large document. One of them is occurences of a two-digit dollar figure followed by a comma (eg. "$ 10") that needs to be changed to have no comma.

  Use GREP I can pick it up by searching for "\$\d\d", but when I replace it with '\$\d\d' I get the string "\$\d\d". IE. "$ 10" becomes "\$\d\d" instead of "$ 10." I'm misunderstanding how works the part 'change' grep? Can someone advise?

  FYI the line in the search/replace support .txt doc is:

  grep

  {find what: "-\\d\\d$,"}

  {change to: "\\$\\d\\d"}

  {include notes: true, include master pages: true include hidden layers: true, any word: false}

  Remove commas after the price.

  .. What includes the extra backslashes to escape the backslash which are part of the GREP expression.

  Any help much appreciated!

  Thank you.

  On Grep Pallette, use below syntax to find two or more digit dollar figure followed by a text of commas,

  Search: (\$\d+),

  Change of: $1

  Vandy

• Flash Player: Installation problem with finding resources

  I have a problem installing Flash Player. He gets 47% full and stop. Explains an error message: "Cannot find Resource '.

  What resource it seeks? And how can I solve this problem? Please, any help would be greatly appreciated.

  My computer is:

  A Compaq laptop with

  Windows 7 is

  64 bit

  Thank you

  Ren
  

  Please try to install using the installation program appropriate from this link:

  tall_in_a_firewall_proxy_server_environment http://helpx.adobe.com/Flash-Player/KB/installation-Problems-Flash-Player-Windows.html#ins

• HP 250 G3: Problem with finding drivers

  HI guys, I recently installed a copy of 32-bit windows 7 on my G3 250 HP with processor intel celeron n2840, but on the site of hp I can't seem to find a driver available with my copy of windows, finding only drivers 64-bit instead. Also some drivers from the dealer seem to not work properly. Are there ways out of this or all the drivers compatible with my laptop and windows version? Thanks for the reply,
  Alex

  Hello:

  At present, the HP support site is down.

  When she returns to the top, you should be able to use most of the W7 x 64 drivers for the HP 250 G2 on your model except the graphics, the BIOS and firmware files.

  Most 64-bit drivers have the 32-bit files in them also.

  Here's the graphic drivers you need...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx? DwnldID = 23889

  Download, unzip and run the exe to install.

• Windows has detected a problem with Skype and close it down, how can I know why. Also I can't get any video on Skype

  I uninstalled Skype and reinstalled Skype 5.3 still have no video. but I have no audio. with the opinion above of Windows

  Hi PAUL MULTIPLIED,

   

  1. for how long have you been faced with this problem?
  2. do you receive any error messages?

   

  If the problem is specific to Skype I would ask of contact you Skype support for assistance on the issue and the check-

  http://Forum.Skype.com/

   

  I hope this helps.

• problems with the migration of the photodollar photos

  Hello, I tried to migrate my photos in photodollar y last Saturday I got it without problem. But now stock Adobe wants to charge me for my pictures and I realized that I don't have my 19 photos!

  Hello

  There is no credit stock migrated showing against the Adobe ID allowing you to post on the forum.  Could you used another email address?

  You are still able to connect to your CPD account?  If so, please try the migration again.  Otherwise, let me know and I will contact you by private message for more info.

  Kind regards

  Bev