Problem with FMS http access

Similar Questions

• Equium A100 - 027 PSAAQ - having problems with WiFi Internet access

  Just installed Windows XP Home edition on my Equium A100-027 (PSAAQ) Vista didn't like. Now I'm having problems with Internet access. Should what drivers I download and how to install?

  Thank you.

  Hello

  I suggest you to check the site toshiba driver
  -> http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  You can search your machine and download the wlan drivers. If you don t know that you you just all download and install ´em, one of the drivers SHOULD work. ;)

  Welcome them

• IHAVE problems with mywireless and access point

  I have problems with my wireless

  Hello

  There are hundreds of models of Points of access configured on systems with different computers in different variations, there may be hundreds of reasons why it does not work.

  Please, help us to reduce the factor of "guessing game" to provide assistance and give the relevant details of your computer systems.

  -----------------------------

  There is an inherent Catch22 to attempt to repair a computer wireless through wireless. Given that the without wire is not connected to the source, there is no interaction between the wireless source and the Wireless Client and no frame of reference to find what works and what does not.

  As a first step, I will temporarily move the computer to a place close to the wireless router and plug with a wire.

  When he works with a wire, switch Off the Wireless Security in the router, disconnect the wire and try to make wireless work. This must be done when the computer is always close to the wireless router to compensate for the weak, and or blocked the signal that could be part of the problem in the new suite spot work.

  In the computer itself.

  Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• What is the problem with my http code?

  I have a problem with the following code on the Bold 9700.  The code works on the Simulator and other devices, but some users have problems.  It seems that nothing is returned when getting the html page.

      static String get_page(String url)
      {
  
          StreamConnection s = null;
          InputStream input = null;
  
          try
          {
  
              s = (StreamConnection)Connector.open(url);
  
              input = s.openInputStream();
              byte[] data = new byte[4096];
              int len;
              StringBuffer raw = new StringBuffer();
              long startTime = System.currentTimeMillis();
  
              while ( -1 != (len = input.read(data)) )
              {
  
                  if (len > 0) {
                      raw.append(new String(data, 0, len));
                  }
  
                  // check for timeout waiting for server; or
                  // what if page never closes...
                  if (System.currentTimeMillis() - startTime >  30000)
                  {
                      s.close();
                      return("ERR2");
                  }
              }
              s.close();
  
              return(raw.toString());
          }
          catch (Exception e)
          {
              return("ERR3");
          }
  
          finally
          {
              try
              {
                  if (input != null)
                      input.close();
              }
              catch (Exception e)
              {
              }
          }
      }
  

  Y does it have that none of the Options application settings must be defined? for example: TCP/IP

  The Thread I pointed you to and the various "required reading" material, describes how the different network paths are selected by changing the suffix of the URL used connection.  The standard demo does not add a suffix, by default, choose BES connection, so will be.  Unless of course, the carrier has provided a different default value for a feature not BIS, for example, I understand that Vodafone UK will send it via WAP.

  According to the treatment of suffix / default connection, the request will be routed through a number of "gateways" like BES/MDS or the carrier's WAP gateway.  If any of them could give the 500.

  Assuming that it makes actually to your server (I assume this is a URL that you control), then the 500 from the treatment of your Web.  For example, this could be because your processing wait some headers in the http request which are not provided.  Or, that demand has been sent by a gateway changing the headers in a way that is not pregnant with your web server.

  With same URL work on the browser is unfortunately not much of a test as it can be routed through a method of communication that you do not use (for example, on Vodafone BIS devices I think the default browser will use BIS - B) and, in addition, it could provide some headers for the http connection that you do not provide.

  The point really is that there are many places that could break this code.  And there are number of variables, including what method of connection is used (and in the case of Vodafone, effectively forced to use), which carrier is used and which headers were provided.

  But I think the first thing we do is to know who is giving you the 500.  If you can follow the application to your own server, so much the better.  If you can not, in the headers that come back with 500, you should some server information.  The dump out., empty the suffix of connection you use and if possible, get the log records from at the time this was done (which confirms the method of connection actually used).

  I also search this forum for more information on issues people have had with the carriers.  I know that there is some information on Vodafone UK.  According to me, that there is still something at least another carrier.

  Sorry, comms on the BB is not as simple as that...

• Problem with apex_collection data access

  Hello
  
  I had a problem with an apex_collection. I'm trying to fill this collection in a loop threw a database cursor. It is part of a process (on charge - before header). It looks similar to the following:
  

  loop
      FETCH curs_1 INTO l_key;
      EXIT WHEN curs_1%NOTFOUND;
      select v.name, p.price
      into l_name, l_price
      from table_1 v, table_2 p
      where v.key = l_key
      and p.fkey = v.key;
   
      APEX_COLLECTION.ADD_MEMBER(p_collection_name => 'temp_collection',
                                     p_c001            => to_char(l_key),
                                     p_c002            => l_name,
                                     p_c003            => to_char(l_price));
  
     l_temp := l_temp||l_name||chr(10);
  
  end loop;

  As you can see I'm filling a temporary variable (l_temp). When I display this variable in an element, it displays the correct values. But when I do a select on the collection, there is no data in the report. The report is on the same page as the process. Query for the report is:
  

  SELECT c001, c002
     FROM APEX_collections
   WHERE collection_name = 'temp_collection'

  I hope someone can help.
  
  Thanks in advance
  Sebastian

  All collection names are allways UPPERCASE. If you are using tiny, she won't, and no error message will be issued.

  Denes Kubicek
  ------------------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  ------------------------------------------------------------------------------

• Problem with some http addresses

  Situation
  Toshiba Satellite A60
  The Wi - Fi PCMCIA card: D-Link DWL-G650 and X-micro
  Unit up-to-date soft.

  When connecting via the WiFi card some pages are not open, but the same pages are open during connection of 100 Mbps cable?

  Any help?

  Hello

  It's very strange. Wireless card you have has very good performance. In my opinion there must be problem with the security settings for your card. Check it out.

  If the laptop and card work properly there is not another explanation for this case.

  Good bye

• Does anyone else have problems with their https connection for their hardware. I'm getting false positives stop TLS hardware access

  Access some of my hardware to make changes has become impossible with the last attempt to ensure low SSL or TLS certificates. I can't access my Modem via https://192.168.1.1 as long as FF is not accept the certificate to the device. This change is very new and not quite refined properly yet I believe.

  Hmm, it looks like:

  • Unable to connect to the network by using SSL (ffx 39) device - unsolved

  You may need to use another browser with the device at the moment. That could make it easier to diagnose the situation, because the other browser can probably provide complete details of certificate and the connection.

• Problem with remote desktop access

  Hi, using windows xp service Pack 3. and when I try to connect with the help of remote desktop citrix.it shows error like "the service user profile Service does not log. User profile cannot be loaded. "and sometimes as"the Group Policy Client service does not log. access is denied. "  can any body help on this problem? .

  I tried to solve the problem by deleting the existing user profile and create again new profile, but the issue is not resolved.

  Can I get any solution for this?

  my pc configuration is:

  Windows xp, service Pack 3.

  Thanks in advance

  Hello pcsekhar,

  For this specific issue, please post to the address provided below.

  Remote Desktop services

  http://social.technet.Microsoft.com/forums/en-us/winserverTS/threads

• Problem with enforcement of access violation of Skype at address 00420BB1 in module 'Skype.exe.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Skype
  • Error messages: Access violation at address 00420BB1 in module 'Skype.exe"address reading 00000006
  • Recent changes made to your computer: just do a system restore as the Skype froze while updating
  • What you have already tried to solve the problem: United Nations the Skype installed and reinstalled to see if it works, but it does not.

  Try the following Skype forums:

  Skype Support Forum: http://forum.voxilla.com/skype-support-forum/

  Other: http://forum.skype.com/index.php?act=idx

  Note: Suggest you stay with the first link.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Problem with & quot; To access the data XML & quot; Tutorial

  I was going through the tutorial on the XML data for access to the (well written I must add) there was a little bug inside, due to an invalid assumption, and it takes the selectedIndex property of the grid, and it assumes it is the same as that of the XML language, which is not the case. Here is the link:
  
  http://www.Adobe.com/devnet/flex/QuickStart/accessing_xml_data/
  
  I understand that this tutorial is the XML "to get to the" not necessarily communicate with DataGrid. I have the same problem and I'm not coming up with a nice way to solve this problem, when you double-click a row in a data grid, you can detect his 'id' / number/child-entry (or the unique property of this entry).
  
  I appreciate your comments.
  
  ML.

  I don't want to analyze this example. Are you asking how to get an id or some other value, when you select a row in a datagrid?

  When you select an item in the list-based control, properety selectedItem control contains a reference to the dataProvider of element for the selected item. You can get goods that are present in this object:
  var sId: String = myDataGrid.selectedItem.myIDProperty;

  If I misunderstood, Please rephrase your question.

  Tracy

• I have a problem with so-called Access Manager and I can't make it out of my computer could it please help me

  I'm unable to remove the so-called Access Manager

  Here's a FAQ on Access Manager: http://windows.microsoft.com/en-US/windows-vista/Internet-Explorer-Content-Advisor-frequently-asked-questions.

  As said t-4-2, we can not help you to override restrictions or remove or disable the program.  This is between you and the administrator of the system that was put in place.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Big problem with user Microsoft Access control

  Hello

  I have to work around for CCleaner (UAC) user access control that begins after every time Windows starts as an auto start the program.

  Every time you start, I get the UAC prompt which warns me again and again.

  I don't want to disable access to the computer, but only for CCleaner user control.

  Creating a link like this: http://www.petri.co.il/bypass-uac-using-desktop-shortcut.htm there's no option for me, so I found this:

  http://www.microsoft.com/en-us/download/details.aspx?id=7352.

  I followed these instructions: http://www.ghacks.net/2010/07/08/get-rid-of-uac-prompts-with-microsofts-application-compatibility-toolkit/

  but it does not work. I always get the guests.

  What can I do?

  Thank you very much in advance

  George

  It would be impossible because it would create an immediate and global security hole.  For example, let's say you whitelist CCLeaner.  Then all viruses and Trojan horses in the world know immediately they can simply replace the file ccleaner.exe on your computer a copy of the virus and it will be automatically approved and completely take over your computer.

• Today, I have a problem with the HTTP request

  Well, this time, I try to get an image .png from a URL. To get this I do the following:

  try{   if (CoverageInfo.isOutOfCoverage()){      setError("No hay covertura suficiente de la red");        errorFlag = true; } else{     c = (HttpConnection)Connector.open(url);      is = c.openDataInputStream();     for(int j=0;j
  My problem is the second 'try' returns: "java.lang.illegalArgumentException". I don't really know much on HTTP conections, so I don't know that I have a lot of wrong code
  in other words, I'm moving to the java language this short code on the C++ language:
  WebRequest request = System.Net.WebRequest.Create(url);HttpWebResponse response = (HttpWebResponse)request.GetResponse();Stream datos = response.GetResponseStream();Imagen = new Bitmap(datos);pb1.Image = Imagen;datos.Close();response.Close();
  
  can someone help me?
  			 
  Thank you RexDoug and peter_strange,
  in the book "java J2ME a tope"-unfortunately or fortunately (for me), it is in Spanish - explain everything about HTTP request and how to interpret correctly the answer. Finally with the following code, I solved my problem:
  try{
      //ask if i have coverage
      if (CoverageInfo.isOutOfCoverage()){
          setError("No hay covertura suficiente de la red");
          errorFlag = true;
      }
      else{
          //create connection
          c = (HttpConnection)Connector.open(url);
          c.setRequestMethod(HttpConnection.GET);
          is = c.openInputStream();
  
          //process response
          if(c.getResponseCode()==HttpConnection.HTTP_OK){
              size = (int)c.getLength();
              if(size != -1){
                  data = new byte[size];
                  is.read(data, 0, data.length);
                  imagen = Bitmap.createBitmapFromBytes(data, 0, -1, 1);
              }
              else{
                  ByteArrayOutputStream byteArray = new ByteArrayOutputStream();
                  int stream;
                  while((stream=is.read())!=-1){
                      byteArray.write(stream);
                  }
                  data = new byte[byteArray.size()];
                  data = byteArray.toByteArray();
                  byteArray.close();
                  imagen = Bitmap.createBitmapFromBytes(data, 0, -1, 1);
              }
          }
          //close connections
          c.close();
          is.close();
      }
  }
  
  This code is similar to the example of rexdoug.
  		   

• problem with users to access remote vpn site to site vpn network

  I did the Setup: asa 5510 configured remote access vpn. My vpn users receive asa 5510 range 192.168.50.0/24 addresses and users access my local lan 192.168.0.0/24. the second side of the local lan 192.168.0.0/24 on asa 5505, I did a vpn site-to-site with network 192.168.5.0/24.on that both sides of a site are asa 5505. inside the interface asa 5510 Elise 192.168.0.10 and inside the interface asa 5505 have address 192.168.0.17.third asa 5505 networked 192.168.5.0/24 address 192.168.5.1. I want my remote access vpn users can access resources on network 192.168.5.0/24. I create the static route on inside the asa 5510 static route 192.168.5.0 interface 255.255.255.0 192.168.0.17 and a static route on inside the asa 5505 static route 192.168.50.0 interface 255.255.255.0 192.168.0.10, but it's not working. What do I do?

  execution of the configuration of my asa 5510 is

  Result of the command: "show run"
  : Saved
  
      :
  
      ASA Version 8.4(2)
  
      !
  
      hostname asa5510
  
      domain-name dri.local
  
      enable password 8Ry2YjIyt7RRXU24 encrypted
  
      passwd 2KFQnbNIdI.2KYOU encrypted
  
      names
  
      !
  
      interface Ethernet0/0
  
      nameif outside
  
      security-level 0
  
      ip address x.x.x.178 255.255.255.248
  
      !
  
      interface Ethernet0/1
  
      nameif inside
  
      security-level 100
  
      ip address 192.168.0.10 255.255.255.0
  
      !
  
      interface Ethernet0/2
  
      description Mreza za virtualne masine- mail server, wsus....
  
      nameif DMZ
  
      security-level 50
  
      ip address 172.16.20.1 255.255.255.0
  
      !
  
      interface Ethernet0/3
  
      shutdown
  
      no nameif
  
      no security-level
  
      no ip address
  
      !
  
      interface Management0/0
  
      nameif management
  
      security-level 100
  
      ip address 192.168.1.1 255.255.255.0
  
      management-only
  
      !
  
      ftp mode passive
  
      clock timezone CEST 1
  
      clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00
  
      dns server-group DefaultDNS
  
      domain-name dri.local
  
      object network VPN-POOL
  
      subnet 192.168.50.0 255.255.255.0
  
      description VPN Client pool
  
      object network LAN-NETWORK
  
      subnet 192.168.0.0 255.255.255.0
  
      description LAN Network
  
      object network NETWORK_OBJ_192.168.0.0_24
  
      subnet 192.168.0.0 255.255.255.0
  
      object network 192.168.0.10
  
      host 192.168.0.10
  
      object service ssl
  
      service tcp destination eq 465
  
      object service tls
  
      service tcp destination eq 995
  
      object network mail_server
  
      host 172.16.20.201
  
      object service StartTLS
  
      service tcp destination eq 587
  
      object service admin_port
  
      service tcp destination eq 444
  
      object service ODMR
  
      service tcp destination eq 366
  
      object service SSL-IMAP
  
      service tcp destination eq 993
  
      object network remote
  
      host 172.16.20.200
  
      object network test
  
      host 192.168.0.22
  
      object network mail
  
      host 172.16.20.200
  
      object network DMZ
  
      host 172.16.20.200
  
      object network Inside_DMZ
  
      host 192.168.0.20
  
      object service rdp
  
      service tcp destination eq 3389
  
      object network DRI_PS99
  
      host 192.168.0.54
  
      object service microsoft_dc
  
      service tcp destination eq 445
  
      object service https448
  
      service tcp destination eq 448
  
      object network mail_server_internal
  
      host 172.16.20.201
  
      object service Acronis_remote
  
      service tcp destination eq 9876
  
      object service Acronis_25001
  
      service tcp destination eq 25001
  
      object service HTTP3000
  
      service tcp destination eq 3000
  
      object network VPNPOOL
  
      subnet 192.168.50.0 255.255.255.0
  
      object-group network PAT-SOURCE-NETWORKS
  
      description Source networks for PAT
  
      network-object 192.168.0.0 255.255.255.0
  
      object-group service DM_INLINE_SERVICE_1
  
      service-object object admin_port
  
      service-object object ssl
  
      service-object object tls
  
      service-object object https448
  
      object-group service DM_INLINE_SERVICE_2
  
      service-object object admin_port
  
      service-object object https448
  
      service-object object ssl
  
      service-object object tls
  
      service-object tcp destination eq pop3
  
      service-object tcp destination eq smtp
  
      object-group service DM_INLINE_SERVICE_3
  
      service-object object admin_port
  
      service-object object https448
  
      service-object object ssl
  
      service-object tcp destination eq smtp
  
      service-object object tls
  
      service-object object Acronis_remote
  
      service-object tcp destination eq www
  
      service-object object Acronis_25001
  
      service-object object microsoft_dc
  
      object-group protocol DM_INLINE_PROTOCOL_1
  
      protocol-object ip
  
      protocol-object tcp
  
      object-group service DM_INLINE_SERVICE_4
  
      service-object object Acronis_25001
  
      service-object object Acronis_remote
  
      service-object object microsoft_dc
  
      service-object tcp destination eq www
  
      service-object tcp
  
      service-object ip
  
      access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_2 any object mail_server
  
      access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 any object mail
  
      access-list Split_Tunnel_List extended permit ip 192.168.0.0 255.255.255.0 any
  
      access-list outside_cryptomap extended permit ip 192.168.0.0 255.255.255.0 192.168.5.0 255.255.255.0
  
      access-list DMZ extended permit object-group DM_INLINE_SERVICE_4 172.16.20.0 255.255.255.0 any
  
      access-list DMZ extended permit object-group DM_INLINE_SERVICE_3 host 172.16.20.201 any
  
      access-list DMZ extended permit object-group DM_INLINE_PROTOCOL_1 172.16.20.0 255.255.255.0 any inactive
  
      access-list DMZ extended deny tcp any any eq smtp
  
      pager lines 24
  
      logging enable
  
      logging asdm informational
  
      mtu outside 1500
  
      mtu inside 1500
  
      mtu DMZ 1500
  
      mtu management 1500
  
      ip local pool vpnadrese 192.168.50.1-192.168.50.100 mask 255.255.255.0
  
      icmp unreachable rate-limit 1 burst-size 1
  
      no asdm history enable
  
      arp timeout 14400
  
      nat (inside,outside) source static LAN-NETWORK LAN-NETWORK destination static VPN-POOL VPN-POOL
  
      !
  
      object network mail_server
  
      nat (DMZ,outside) static x.x.x.179
  
      object network mail
  
      nat (DMZ,outside) static x.x.x.180
  
      access-group outside_access_in in interface outside
  
      access-group DMZ in interface DMZ
  
      route outside 0.0.0.0 0.0.0.0 178.254.133.177 1
  
      timeout xlate 3:00:00
  
      timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  
      timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
  
      timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
  
      timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  
      timeout tcp-proxy-reassembly 0:01:00
  
      timeout floating-conn 0:00:00
  
      dynamic-access-policy-record DfltAccessPolicy
  
      action terminate
  
      dynamic-access-policy-record dripolisa
  
      aaa-server DRI protocol ldap
  
      aaa-server DRI (inside) host 192.168.0.20
  
      ldap-base-dn DC=dri,DC=local
  
      ldap-scope subtree
  
      ldap-naming-attribute sAMAccountName
  
      ldap-login-password *****
  
      ldap-login-dn CN=dragan urukalo,OU=novisad,OU=sektor2,OU=REVIZIJA,DC=dri,DC=local
  
      server-type microsoft
  
      user-identity default-domain LOCAL
  
      aaa authentication enable console LOCAL
  
      aaa authentication http console LOCAL
  
      aaa authentication serial console LOCAL
  
      aaa authentication telnet console LOCAL
  
      aaa authorization command LOCAL
  
      http server enable
  
      http 192.168.1.0 255.255.255.0 management
  
      http 192.168.0.0 255.255.255.0 inside
  
      no snmp-server location
  
      no snmp-server contact
  
      snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
  
      virtual telnet 192.168.1.12
  
      crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
  
      crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  
      crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
  
      crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
  
      crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  
      crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
  
      crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
  
      crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
  
      crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  
      crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
  
      crypto ipsec ikev2 ipsec-proposal DES
  
      protocol esp encryption des
  
      protocol esp integrity sha-1 md5
  
      crypto ipsec ikev2 ipsec-proposal 3DES
  
      protocol esp encryption 3des
  
      protocol esp integrity sha-1 md5
  
      crypto ipsec ikev2 ipsec-proposal AES
  
      protocol esp encryption aes
  
      protocol esp integrity sha-1 md5
  
      crypto ipsec ikev2 ipsec-proposal AES192
  
      protocol esp encryption aes-192
  
      protocol esp integrity sha-1 md5
  
      crypto ipsec ikev2 ipsec-proposal AES256
  
      protocol esp encryption aes-256
  
      protocol esp integrity sha-1 md5
  
      crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
  
      crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
  
      crypto map outside_map 1 match address outside_cryptomap
  
      crypto map outside_map 1 set peer 195.222.96.223
  
      crypto map outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
  
      crypto map outside_map 1 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
  
      crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
  
      crypto map outside_map interface outside
  
      crypto ikev2 policy 1
  
      encryption aes-256
  
      integrity sha
  
      group 5 2
  
      prf sha
  
      lifetime seconds 86400
  
      crypto ikev2 policy 10
  
      encryption aes-192
  
      integrity sha
  
      group 5 2
  
      prf sha
  
      lifetime seconds 86400
  
      crypto ikev2 policy 20
  
      encryption aes
  
      integrity sha
  
      group 5 2
  
      prf sha
  
      lifetime seconds 86400
  
      crypto ikev2 policy 30
  
      encryption 3des
  
      integrity sha
  
      group 5 2
  
      prf sha
  
      lifetime seconds 86400
  
      crypto ikev2 policy 40
  
      encryption des
  
      integrity sha
  
      group 5 2
  
      prf sha
  
      lifetime seconds 86400
  
      crypto ikev2 enable outside
  
      crypto ikev1 enable outside
  
      crypto ikev1 policy 10
  
      authentication pre-share
  
      encryption 3des
  
      hash sha
  
      group 2
  
      lifetime 86400
  
      telnet 192.168.0.0 255.255.255.0 inside
  
      telnet timeout 5
  
      ssh timeout 5
  
      console timeout 0
  
      dhcpd auto_config outside
  
      !
  
      dhcpd address 192.168.0.14-192.168.0.45 inside
  
      !
  
      dhcpd address 172.16.20.2-172.16.20.150 DMZ
  
      dhcpd dns x.x.x.177 interface DMZ
  
      dhcpd auto_config outside interface DMZ
  
      dhcpd option 6 ip x.x.x.177 interface DMZ
  
      dhcpd enable DMZ
  
      !
  
      dhcpd address 192.168.1.2-192.168.1.254 management
  
      dhcpd enable management
  
      !
  
      threat-detection basic-threat
  
      threat-detection statistics port
  
      threat-detection statistics protocol
  
      threat-detection statistics access-list
  
      no threat-detection statistics tcp-intercept
  
      webvpn
  
      group-policy GroupPolicy_x.x.x.223 internal
  
      group-policy GroupPolicy_x.x.x.223 attributes
  
      vpn-tunnel-protocol ikev1 ikev2
  
      group-policy drivpn internal
  
      group-policy drivpn attributes
  
      dns-server value 192.168.0.20 192.168.0.254
  
      vpn-simultaneous-logins 10
  
      vpn-idle-timeout 30
  
      vpn-tunnel-protocol ikev1 l2tp-ipsec
  
      split-tunnel-network-list value Split_Tunnel_List
  
      default-domain value dri.local
  
      username driadmin password AojCAMO/soZo8W.W encrypted privilege 15
  
      tunnel-group drivpn type remote-access
  
      tunnel-group drivpn general-attributes
  
      address-pool vpnadrese
  
      authentication-server-group DRI
  
      default-group-policy drivpn
  
      tunnel-group drivpn ipsec-attributes
  
      ikev1 pre-shared-key *****
  
      tunnel-group x.x.x.223 type ipsec-l2l
  
      tunnel-group x.x.x.223 general-attributes
  
      default-group-policy GroupPolicy_x.x.x.223
  
      tunnel-group x.x.x.223 ipsec-attributes
  
      ikev1 pre-shared-key *****
  
      ikev2 remote-authentication pre-shared-key *****
  
      ikev2 local-authentication pre-shared-key *****
  
      !
  
      class-map inspection_default
  
      match default-inspection-traffic
  
      !
  
      !
  
      policy-map type inspect dns preset_dns_map
  
      parameters
  
        message-length maximum client auto
  
        message-length maximum 512
  
      policy-map global_policy
  
      class inspection_default
  
        inspect dns preset_dns_map
  
        inspect ftp
  
        inspect h323 h225
  
        inspect h323 ras
  
        inspect rsh
  
        inspect rtsp
  
        inspect sqlnet
  
        inspect skinny 
  
        inspect sunrpc
  
        inspect xdmcp
  
        inspect sip 
  
        inspect tftp
  
        inspect ip-options
  
        inspect netbios
  
        inspect icmp
  
        inspect http
  
      !
  
      service-policy global_policy global
  
      prompt hostname context
  
      no call-home reporting anonymous
  
      Cryptochecksum:69c651e94663fc570b67e0c4c0dcbae1
  
      : end
  

  running config asa 5505

  Result of the command: "show run"
  : Saved
  
      :
  
      ASA Version 8.2(1)
  
      !
  
      hostname ciscoasa
  
      enable password csq7sfr0bQJqMGET encrypted
  
      passwd 2KFQnbNIdI.2KYOU encrypted
  
      names
  
      name 192.168.5.0 PALATA
  
      !
  
      interface Vlan1
  
      nameif inside
  
      security-level 100
  
      ip address 192.168.0.17 255.255.255.0
  
      !
  
      interface Vlan2
  
      nameif outside
  
      security-level 0
  
      ip address 10.13.74.33 255.255.255.0
  
      !
  
      interface Ethernet0/0
  
      switchport access vlan 2
  
      !
  
      interface Ethernet0/1
  
      !
  
      interface Ethernet0/2
  
      !
  
      interface Ethernet0/3
  
      !
  
      interface Ethernet0/4
  
      !
  
      interface Ethernet0/5
  
      !
  
      interface Ethernet0/6
  
      !
  
      interface Ethernet0/7
  
      !
  
      ftp mode passive
  
      clock timezone CEST 1
  
      clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00
  
      object-group service DM_INLINE_SERVICE_1
  
      service-object ip
  
      service-object tcp
  
      service-object icmp echo
  
      service-object icmp echo-reply
  
      service-object tcp eq domain
  
      service-object tcp eq ldap
  
      service-object tcp eq smtp
  
      object-group service DM_INLINE_SERVICE_2
  
      service-object ip
  
      service-object tcp eq domain
  
      service-object tcp eq www
  
      service-object tcp eq https
  
      service-object tcp eq smtp
  
      object-group service Sharepoint8080 tcp
  
      port-object eq 8080
  
      access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 any any
  
      access-list inside_access_in extended permit object-group DM_INLINE_SERVICE_2 192.168.0.0 255.255.255.0 any
  
      access-list inside_nat0_outbound extended permit ip 192.168.0.0 255.255.255.0 PALATA 255.255.255.0
  
      access-list outside_2_cryptomap extended permit ip 192.168.0.0 255.255.255.0 PALATA 255.255.255.0
  
      access-list inside_nat0_outbound_1 extended permit ip 192.168.0.0 255.255.255.0 PALATA 255.255.255.0
  
      pager lines 24
  
      logging enable
  
      logging asdm informational
  
      logging mail errors
  
      logging from-address
  
      logging recipient-address  level debugging
  
      mtu inside 1500
  
      mtu outside 1500
  
      icmp unreachable rate-limit 1 burst-size 1
  
      no asdm history enable
  
      arp timeout 14400
  
      global (outside) 1 interface
  
      nat (inside) 0 access-list inside_nat0_outbound_1
  
      nat (inside) 1 192.168.0.0 255.255.255.0
  
      static (inside,outside) 10.13.74.35 192.168.0.22 netmask 255.255.255.255
  
      static (inside,outside) 10.13.74.34 192.168.0.20 netmask 255.255.255.255 dns
  
      access-group inside_access_in in interface inside
  
      access-group outside_access_in in interface outside
  
      route outside 0.0.0.0 0.0.0.0 10.13.74.1 1
  
      route inside 0.0.0.0 0.0.0.0 192.168.0.17 tunneled
  
      timeout xlate 3:00:00
  
      timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  
      timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
  
      timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
  
      timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  
      timeout tcp-proxy-reassembly 0:01:00
  
      dynamic-access-policy-record DfltAccessPolicy
  
      aaa authentication telnet console LOCAL
  
      http server enable
  
      http 10.13.74.0 255.255.255.0 outside
  
      http 192.168.0.0 255.255.255.0 inside
  
      http 10.15.100.0 255.255.255.0 outside
  
      no snmp-server location
  
      no snmp-server contact
  
      snmp-server enable traps snmp authentication linkup linkdown coldstart
  
      virtual telnet 192.168.0.53
  
      crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
  
      crypto ipsec security-association lifetime seconds 28800
  
      crypto ipsec security-association lifetime kilobytes 4608000
  
      crypto map outside_map 1 match address outside_2_cryptomap
  
      crypto map outside_map 1 set pfs
  
      crypto map outside_map 1 set peer 10.15.100.15
  
      crypto map outside_map 1 set transform-set ESP-3DES-SHA
  
      crypto map outside_map interface outside
  
      crypto isakmp enable outside
  
      crypto isakmp policy 10
  
      authentication pre-share
  
      encryption 3des
  
      hash sha
  
      group 2
  
      lifetime 86400
  
      telnet 192.168.0.0 255.255.255.0 inside
  
      telnet timeout 5
  
      ssh timeout 5
  
      console timeout 0
  
      dhcpd auto_config outside
  
      !
  threat-detection basic-threat
  
      threat-detection statistics access-list
  
      no threat-detection statistics tcp-intercept
  
      webvpn
  
      username driadmin password AojCAMO/soZo8W.W encrypted privilege 15
  
      tunnel-group 10.15.100.15 type ipsec-l2l
  
      tunnel-group 10.15.100.15 ipsec-attributes
  
      pre-shared-key *
  
      !
  
      class-map inspection_default
  
      match default-inspection-traffic
  
      !
  
      !
  
      policy-map type inspect dns preset_dns_map
  
      parameters
  
        message-length maximum 512
  
      policy-map global_policy
  
      class inspection_default
  
        inspect dns preset_dns_map
  
        inspect ftp
  
        inspect h323 h225
  
        inspect h323 ras
  
        inspect rsh
  
        inspect rtsp
  
        inspect esmtp
  
        inspect sqlnet
  
        inspect skinny 
  
        inspect sunrpc
  
        inspect xdmcp
  
        inspect sip 
  
        inspect netbios
  
        inspect tftp
  
        inspect icmp
  
      !
  
      service-policy global_policy global
  
      smtp-server 173.194.79.109
  
      prompt hostname context
  
      Cryptochecksum:4767b6764cb597f0a7b8b138587d4192
  
      : end
  

  Thank you

  Hello

  I have previously edited the my initial response was in fact not necessary since you were actually using full Tunnel

  EDIT: Actually just noticed the the VPN client isnt using Split Tunnel. Its Full Tunnel at the moment since it doesnt have the "split-tunnel-policy tunnelspecified"
  

  So you don't really have any of those.

  Please mark the question answers and/or assess response

  Ask more if necessary

  -Jouni

• PowerEdge 2800 - problem with Internet remote access

  Hi all

  I came here for help with connectivity to my server remotely. I bought Server poweredge 2800, I did all the necessary configurations including raid and system installation. After I try to open a remote web access to my server and I still can't get this to work. I went to my server configuration and static value ip, gateway, mask after that I tried to connect to it, via a browser, since different pc in my network for poweredge on standby. Unfortunetly, I can't get connection with it (I put https://ipAddress). I went again this configuration and also tried with the customer option dhcp or static including the configuration of my router for this ip address, but no one works for me. I don't have any idea what I'm doing wrong. Can you please help me please?

  Open a command prompt and type in the following:

  racadm racresetcfg (this will reset to the default values listed below DRAC) - reset may take up to 10 minutes to complete - there is no progress shown, so give it about 10 minutes before moving.

  IP address: 192.168.0.120
  Subnet mask: 255.255.255.0
  Default gateway: 192.168.0.1
  Login: root
  Password: calvin

  If this information will not work for you, you can set the network information by the following from the command prompt:

  racadm setniccfg s ipAddress netmask entry gate

  Again, can take a few minutes before you can access it with the new settings.