. Problem with full screen of SWFs

Similar Questions

• Remote - problem with full screen desktop

  I use Win 7 for a few months now, and the user experience is great!

  Remote Desktop software update is large but with a very annoying problem that I am facing.
  I use this to access my PC on my home LAN. I left once his mode full screen I need a windowed mode to work, but since I was not able to return to full screen. I tried to restart the sessions remotely, Resart the two PCs, delete the information identification, but in vain.

  Kindly help to solve the problem, because it is very annoying to use the session remotely in windowed mode, navigate and go down each time to access the taskbar and the address bar!

  Thank you.

  Hello
   
  Follow these steps and check whether the problem is resolved.
   
  Method 1:
   
  -Start "Remote Desktop connection".
  -Click on 'Options '.
  -Click the "View" tab
  -On "Display Configuration" settings, you can change the display of "Remote Desktop connection" by moving the slider of "small to large.
  -By moving the "slider" all the way to large, the display settings will automatically set in 'full screen '.
   
  Method 2:
   
  You can try CTRL-ALT & Break to return to the screen in full-screen.
  For more information about the remote desktop connection it see below section of Windows Help.
   
  Remote Desktop connection: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions

  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Satellite Pro L20-someone ' one can tell me if I have a problem with the screen?

  Hello

  I have a Pro L20 - PSL25E and I recently had problems with the screen, it was intermittently flickering/lose color and whiting almost (when the color fades white vertical lines begin to appear).
  This seemed to worsen after that I dropped it (only from about 2 feet off the ground, not a big drop).

  I thought that the sceen can go, but the performance of the laptop seems to be affected when this happens, the laptop started to run very slow (tracks mouse slowly, programs I clicked take ages to run and it freezes sometimes to stop flashing) that had me thinking that it might be a virus or performance problem.

  My screen, drivers are updated, I did a full scan with McAfee, ran a clear-up system and a Defrag.

  I was wondering if anyone knew if it seemed to be a problem with the connections of the screen and would need replacement or if it could be repaired or if it were a performance problem?

  Any help would be great thank you appreciate!
  Rebecca.

  Looks like the graphics chip has a problem, which I think is a motherboard replacement.

  You can get a quote for repair to an authorized service provider. There is a list of ASP on the Toshiba site.

• Problem with matrix/screen in Qosmio F55-Q502

  Hello

  For a few weeks, I have a strange problem with matrix/screen of my laptop.
  The matrix flickers very often - no matter if the power cable is plugged in or not.
  The screen is full intensity and all of a sudden it starts flashing - it gets darker, lighter, usually for a few / dozen seconds. It does when no one touches or when I'm working on it.
  This very annoying and making eyes tired - he does it very fast and there is few levels of screen brightness.

  In addition, sometimes the screen turns off - you can see what is on the desktop but the screen is very very dark (but not empty or completely off). No reason - sometimes just in the workplace, sometimes for example when I touch (not pull) the power cable between the laptop and the power supply.
  Then, the only way to return to normal brightness of screen id to close the lid just for half a second and open it
  -matrix comes on normally, but can 'turns off' moment later and I have to do it once more - sometimes even several times...
  After 'action' with cover screens it seems that nothing ever happens...

  Anyone an idea what is the cause of such behavior or how to diagnose in details?
  Or maybe solve this problem?

  Best regards
  300 m

  Sounds like the backlight or inverter fails, or there is a bad connection.

  Is the unit under warranty? Send it to an ASP for repair.

  You should avoid to repair yourself, the backlight is very high voltage!

• Conflict of widget with full screen

  Hi all!

  Good news:

  I created a button full screen in a flash to Captivate movie file that works like the button full screen for youtube videos that fills the entire screen to 100%. Works great!

  Problem:

  However, if any widget is inserted on a slide into a Captivate course, fullscreen works except it disables the functionality of 100%. To clarify the problem, when full screen is enabled, the size of the real dimensions course remains the same while the rest of the background goes full screen with any widget included in any Captivate slide.

  Without using Widgets, full screen works fine but I would eventually like to use widgets in my classes. Anyone have any idea why this is happening? Any advice or fixes?

  Sample files are available here:

  Problem with the Widget: http://www.artisture.com/digital/fullscreen1.zip
  Functional without Widget: http://www.artisture.com/digital/fullscreen2.zip

  
  Thanks in advance.

  ~ edlearner

  The problem is that the widgets use a Flash command called StageScaleMode = NO_SCALE in order to adapt the settings of the widget in their rightful place in the widget properties interface. If you do not use this command, then the window of parameters of the widget will be blown out of proportion and the Captivate Developer won't be able to enter anything in the settings of the Widget tab. The problem is that this "NO_SCALE" setting also affects the whole ability to Captivate projects nationwide.

  All Adobe stock widgets I have this problem and the only way around is to edit the FLA files for each of the widgets, and then republish it.

  / Michael

• AMD Radeon 7570-devices is not compatible with Windows 10 - you're going to have problems with your screen

  Microsoft will come out with Windows 10, as an upgrade of the free operating system next month, July 29, 2015. They came out with an app, 'Get Windows 10', which is intended to help the operating system upgrade process. In this app, it checks for compatibility issues that may exist between your computer and their new Windows 10.  I get results for two of compatibility issues when I run this app. The one that concerns me, it is with the video card that came with my computer, AMD Radeon HD 7570.

  The app tells me: "these devices are not completely compatible with Windows 10" and he adds "you will encounter problems with your screen."

  Is there any driver updates that resolve this problem?

  The driver, I installed on my pc is Advanced Micro Devices, Inc. version 8.960.11.2000

  Windows says that the driver is up-to-date.

  If no driver is available to correct this problem will be I need to replace the video card in my computer and if so with what?

  I currently use two screens, a LG 22EA53 (analog) and an Acer S230HL without any problems with Windows 7, Home Premium, Service Pack 1.

  Malygris1,

  Well, son of a gun... looks that microsoft has made changes in their updates.

  Now when you run the "'get 10 app Windows, check your PC ' it reads in devices..." "0 problems found."

  Looks like Microsoft do with last-minute changes, as you indicated, and others have mentioned about being patient on this matter, that they may (?) have addressed this problem.  Probably won't suddenly course up until the update is done.

  Guess for now, I have to score this as accept as a Solution.

• Problem with the screen on IPAD curtain

  Hello

  I'm a bad psychic, and I have a problem with the screen curtain.

  A longitudinal of Voice Over, the screen curtain is automatically activate.

  Normally to turn it off, you must type three times with three fingers. Only on my IPAD when I type three times with three fingers is "saying that turns off or preach. Find it me impossible to disable the screen curtain when voiceover is active.

  The latest version of IOS 9.2.1 is installed.

  I reset the Ipad and nothing changes.

  Can someone help me?

  Thank you

  Is is possible that the zoom is also on your iPad? If this is the case, try to use a quadruple 3 finger tap to turn off screen curtain.

  If the zoom is not active, try:

  1. Possessing the sleep/wake and home button until the Apple logo appears or 15-20 seconds.
  2. If, you can't remove the curtain of the screen, I would advise you reset the settings of the iPad. Settings > general > reset > reset all settings. It will be his turn VoiceOver off, but then you can use iTunes to turn on VoiceOver. Voice-over should return without the curtain of the screen automatically active. IOS - Apple Support using accessibility features

  The of is it possible that zoom is also active your iPad? In this case, you must use a valve 3 quadruple finger pour disable the screen curtain.

  try if the zoom is not enabled:
  1. While holding the button market / sleep and home to ' to the Apple logo, or 15-20 seconds.
  2. If you still can't delete the screen curtain, I recommend to RESET the settings on the iPad. Settings > General > RESET > RESET all settings. This turns off VoiceOver, but you can then use iTunes to turn on VoiceOver. Back to turn voiceOver should without the curtain automatically active screen. Use IOS - Apple support accessibility features

  -AJ

• Problem with switching screens

  Hello, I have a problem with switching screens. Here is my code (both screens extends screen):

  SerializableAttribute public class Main extends UiApplication {}

  Private TrainLinkScreen trainLinkScreen;
  Private WorkingScreen workingScreen;
  private string;

  Public Shared Sub main (String [] args) {}
  new hand (.enterEventDispatcher ());
  }

  public Main() {}
  workingScreen = new WorkingScreen();
  pushScreen (workingScreen);

  try {}
  trainLinkScreen = new TrainLinkScreen();
  } catch (GpsException ex) {}
  message = ex.getMessage ();
  } catch (FileException ex) {}
  message = ex.getMessage ();
  }
  If (message! = null &! message.equals("")) {}
  invokeLater (new Runnable() {}

  public void run() {}
  Dialog.Alert (message);
  System.Exit (1);
  }
  });
  } else {}
  popScreen (workingScreen);
  pushScreen (trainLinkScreen);
  }
  }
  }

  The problem is that the workingScreen is not displayed. The download takes a little time, so I wanted to put here a screen like "I work, please wait...". ", but he appears, the unit freezes for a few seconds and then the trainLinkScreen appears. Could someone please write where is the problem? I tried invokeLater on the first screen, but it ends with the crash on popScreen (trainLinkScreen). I tried invokeLater on trycatch also block, but it does not work either. Help, please.

  Thank you. I already have the solution (I hope that ), I put to device gps location in a separate method (it's a small part of the code that does not have too much time to finish), she called before initialization and initialization in method invokeLater as a thread (the large part, too download from the internet). The display works perfectly in this way (in the first place, the "Download" screen appears and then comes the rest of the code) Although some other things seems to not work properly now

• Firefox 18.0.2 aligns with full screen in Windows 7 (32 bit) even when I slide sideways. Anyone else seeing this?

  Windows 7 align on the net somewhere around 15 FF (FF drag window to the left or right edge of the desktop) has stopped working. FF now aligns only on the full screen. It's really a pain since I often have two Windows Open (FF at the request of the half, such as excel or outlook open in the other half). I keep hope it is fixed with the next version, but I see that this problems with 18.0.2.

  Safe mode is a good suggestion. Snap of half-screen FF has worked in safe mode. I then jumped back to normal mode and started disabling add until I figured out that you caused the problem (FindBar Tweak 0.5.5). All better now. Thank you!

• IPhone update (but an old having problems with the screen Activate iPhone and Apple ID)

  I have an iPhone 5 that, by chance (Pocket escaped), is stuck on the screen of the iPhone 'Find your phone' Activate.  The iPhone does not accept my Apple ID.  He is looking for an address icloud.com.  I can't honestly remember a set up, and I tried a number of variations on the icloud.com address (using the 'index' system provides) and passwords with no luck.  Do not have any problems with my Apple ID - I can see my phone & details on my screen of the user, when I connect my account (via the office).  Subject to my cellular service provider, I tried to force a restore on the phone via iTunes, but after that he asked me a few questions of initial Setup, I'm just at the "Activate iPhone" screen

  To be honest, I was going to pick up a new phone this week anyway.  My concern is now that I don't want to not suddenly faced with the same problem.  This lock, I meet - is - this quite specific for the phone itself? If I get a 6 plus and use this Apple ID to activate it, I ask in trouble? I admit that I am a twit when it comes to activation codes, the Apple ID, SIM cards and others.

  It was my first smartphone (+ 3 years now) and the installer was made by my employer, so strange things could happen at the beginning.

  Thank you all for any help

  If the implementation was made by your employer, they can put in something different from your Apple ID to find my iPhone. It also seems that if something was damaged in the fall. Who can contribute to the problem.

  If, when you receive your new phone, you make sure you use your Apple ID to find my iPhone, you should have no problem.

• ThinkPad X 230 Windows 7-64: problems with the screen after updates

  Hi all

  I have a problem with the Thinkpad X 230. After a recent update of Windows 7 (64-bit), the screen resolution is set to 800 x 600 and brightness to the minimum. FN + F8/F9 does not work. The brightness is uncontrolled. I had to restore the system before the update.

  How to solve the problem, do anyone know?

  Thank you!

  Isosik

  Hi Isosik,

  Welcome to Lenovo Community!

  According to the request, we understand that you are facing problem with the display resolution on your ThinkPad X 230.

  If you have updated the drivers from Windows update, sometimes this kind of problem occurs with windows generic drivers for cause of driver incompatibility, suggest always update drivers only via the ThinkVantage System Update utility. Update only the application of Microsoft Windows Update.

  You can also manually download the drivers from the Lenovo support site.

  Lenovo support site.

  I hope this helps.

  Best regards

  Agnes Kumar

• I'm having a problem with the screen resolution cannot be superior to 800 x 600 pixels

  All this began after I plug an i9 phone to my pc to load

  later, to this day, when I turned on my pc screen resolution would not stay how I put it

  He wants to just go to 800 x 600 pixels.

  I ran microsoft security scan it found and deleted a virus java exploit cve 2010-4452

  but still having trouble with the screen resolution

  If the problem occurred after you plugged into your phone. I suggest to perform a restore of the system automatically, put it on a date 2 days before you had the problem. If this isn't the case, you can check the video card driver:

  Start > run > devmgmt.msc
  Check your video card driver or see if there are any missing drivers
  If its lack, then update or install the driver of your video card.
  I hope this helps you! Good luck.

• Need help with full screen layout...

  I create a logon screen for an application that has several RichTextFields and two ButtonFields.  The fields are all arranged vertically.

  I use a table of HorizontalFieldManagers to center the vertical fields horizontally within the VerticalFieldManager.  The problem is that the centering work for the ButtonFields, but not the RichTextFields.

  Here is the screen on the Simulator:

  

  Here's what the code looks like the VerticalFieldManager for full screen:

      public tumblingIntroScreen(String appTitle, String description)
      {
          super(new VerticalFieldManager(Manager.FIELD_VCENTER), Screen.DEFAULT_CLOSE | Manager.FIELD_VCENTER);
  

  Here is the code for the table HorizontalFieldManager.

  // set up the array
      HorizontalFieldManager hfmTitle, hfmDesc, hfmBOne, hfmBTwo, hfmThree, hfmFour;
      HorizontalFieldManager[] hfm = {hfmTitle, hfmDesc, hfmBOne, hfmBTwo, hfmThree, hfmFour};
  
  ......
  
  // initialize each HorizontalFieldManager
          for(int j=0;j
  The following code adds the HorizontalFieldManagers to the full screen
          // add fields to screen
          add(new LabelField()); // this and next are for spacing
          add(new LabelField());
          add(new LabelField()); // this and next are for spacing
          add(new LabelField());
          hfm[0].add(firstLine);
          add(hfm[0]);
          add(new LabelField()); // for spacing
          hfm[1].add(secondLine);
          add(hfm[1]);
          add(new LabelField()); // this and next are for spacing
          add(new LabelField());
          hfm[4].add(thirdLine);
          add(hfm[4]);
          add(new LabelField());
          hfm[2].add(authenticate);
          add(hfm[2]);
          add(new LabelField());  // more spacing
          add(new LabelField());
          hfm[5].add(fourthLine);
          add(hfm[5]);
          add(new LabelField());  // more spacing
          hfm[3].add(signUp);
          add(hfm[3]);
  
  no idea why the Manager is only the ButtonFields centering?
  			 
  Solved.
  Fact the first field I added to the VerticalFieldManager a RichTextField (Field.USE_ALL_WIDTH).  That fixed the problem of centering.
  		   

• How to use invites him back with full screen in XP Mode

  I have software that runs with the DOS prompt. (built by CLIPPER back)

  When I use with XP Mode, I can't do full screen (ALT + ENTER) mode

  What should I do?

  Thank you.

  I have software that runs with the DOS prompt. (built by CLIPPER back)

  When I use with XP Mode, I can't do full screen (ALT + ENTER) mode

  What should I do?

  Thank you.

  Hello

  I suggest that you post this message in our Windows 7 virtualization Forum

  This is where the MP Mode experts answer questions.

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• BlackBerry Smartphones having HUGE problem with the screen

  Please help me people... My flipberry went completely crazy...
  I ' l try to explain the problem with as much detail as I can remember...
  Since last week or both internal as external screen my phone acted crazy...
  for the start of a few days, the problem started with the internal display will red sometimes, or show the half of the screen with stripes of colors... I thought it was a passing phase...
  but after a few days, the screen went completely black... both screens external and internal... until this time, as I ran the firmware 4.6.0.222
  so that day I sat down and wiped my phone completely and loaded the latest firmware 4.6.0.236... in order to completely black screens are returned to the way they were... sometimes ok, sometimes showing abstract things and weird colors...

  and even today both screens went completely black... so I'm currently trying to get back to the 4.6.0.180 version as recommended by t-mobile...

  and I have not dropped my phone once again since I bought it 4 months ago... need help

  usually the phone will come with a free warranty of one year.  The best thing I can suggest is to return to the top of any data you left phone and bring it back for a replacement or sent it to be repaired because it seems to me that your phone is defective.