Problem with Installation of flex 2 in Windows Vista

Similar Questions

• Help with installation of Mcafee Antivirus on Windows Vista Edition Home Premium

  The program (Mcafee Antivirus) continues to stop the installation and the wont install on my Windows Vista computer. He says it's a matter of Windows. That's what I have under Application errors:

  Start the application failing application Install.exe_McAfee Integrated Security Platform installed, version 3.15.146.0, time stamp 0x4a89b652, failed module ntdll.dll, version 6.0.6002.18005, time stamp 0x49e03821, exception code 0xc0000374, offset 0x000afaf8, process id 0 x 1784 error, time 0x01ca6def7e5cb62c

  http://www.McAfee.com/us/support/index.html

  For any problems with their software at the link above, contact McAfee.

  See you soon... Mick Murphy - Microsoft partner

• Problem with unistal service pack 2 for Windows Vista

  Well, I have a problem with service pack 2, I installed a service pack 2 for 64-bit system. Later, I check my computer and found my system is 32 bit, now I want to uninstall this service pack and install service pack 2 for 32 but I can't do that, because in the final phase, Windows told me, service pack could not be uninstalled.

  What can I do to fix this?

  Transfer your question in the Windows Update Forum, or contact Microsoft SP2:

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem with the touchpad after upgrade to Windows Vista

  After that I've upgraded to windows vista I had problem with the touchpad, that I'm not?

  Can U help me!

  Maybe when you tell us what model of laptop you have. ;)

• Problem with Camera Raw 8.3RC on Windows Vista 64

  Just installed ACR 8.3 RC and CS6 can't find the ACR. Are not in my plugins list.

  What past?

  And also a problem with the DNG converter entry point.

  Everything worked fine before installing the new RC.

  We believe that we are now fixed the following problem with the Release Candidate of Camera Raw 8.3 version, where the plug-in would work properly under Windows XP. In particular, if you have seen this message:

  "Entry point not found: the procedure entry point WakeAllConditionVariable is not found in the KERNEL32.dll dynamic link library."

  You can download the new version of Camera Raw 8.3 RC from here:

  http://labs.Adobe.com/downloads/cameraraw8-3.html

  If you check the version number of this construction, it should be 8.3.0.123 (beginning was one who did not 8.3.0.122). 123 build should now work correctly.

  If you are using a newer version of Windows (Vista, Win 7, Win 8, etc.) or a Mac, you can ignore this message because the problem affected ACR / DNG Converter when running under Windows XP.

• Problem with installation of Boot Camp in windows 10

  Windows 10 installed perfectly on my Macbook, 13 "mid 2013.  Although, when I'm on windows and try to install the Boot Camp Installer, it reached about 50% and stops.  The status shows "Realtek Audio".  I already re-formatted flash drive, entered the boot camp assistant and installed the windows media files.

  Side Windows works fine, but there is no audio data and I can't use my keyboard features it's the keyboard backlight, brightness and volume.

  Figured it out.  For someone else with the same question, go in the BootCamp folder, then in the drivers folder and delete the Realtek folder.  Everything works fine now

• I have a problem with the transfer of files from Windows Vista to Windows 7.

  Original title: transfer files from Vista to Windows 7. Type of processor

  I just bought a new computer which has Windows 7.  I am trying to transfer the processing of speech and spreadsheets from your old computer to new th but all I can manage is a file of jarbled letters on a program called Word Pad. Can someone tell me if there is a secret code for this?

  Windows is NOT equipped with Office installed. You must install your copy of Microsoft Office on the new computer.
  And how on EARTH this has nothing to do with Windows 7 security, privacy, and user accounts altogether, I can't see...

• Problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200

  Am having problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200

  * original title - I'm having a problem *.

  You have the latest drivers?
  http://www.nvidia.com/page/support.html

  Aero - Windows 7 - How to troubleshoot problems with Aero

  (1) first of all, click on the Start button and type in Aero. Now, click on find and fix problems with transparency and other Visual effects of link.

  (2) a new Wizard dialog box opens. Make sure that you click Advanced to solve all problems automatically.

  (3) either the problem will be solved or not. If this isn't the case, you will get a list of items that are potential problems.

  (4) If you want to see more details about the problem, you can click View detailed information. This will give you a list of potential problems that have been verified and those that pose problems.

  If it does not---> click Start---> right click computer---> click Properties

  Click the link for 'Windows performance index' and then click 'rerun the assessment"to refresh your WEI score and try again.

  Note: If you have Windows 7 Starter, or if your system does not meet the requirements for Aero you will not be able to use Aero.

• Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

  Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

  Would you advice, thank you.

  Hi Hugo,.

  1. what anti-virus software you have installed in the computer?

  2. What is the full error message/code?

  3. the issue occurred after you install Minecraft?

  4. are you able to play Minecraft without any problem?

  5. what happens with Antivirus and Java?

  Windows Update can occur if one or more of the following conditions are met:

  1. the Windows Update database is damaged.

  2. antivirus software is configured to scan the %Windir%\SoftwareDistribution folder.

  3. the service (BITS) Background Intelligent Transfer Service does not receive a content link header.

  4. a required system file is incorrectly registered.

  5. Windows Installer has encountered an error.

  6. the manifesto of component maintenance (EC) is damaged.

  7. the Windows Update service has stopped during the installation.

  8. a version of the file conflict exists with Windows Update agent files.

  Please follow the steps described in the methods to solve the problem:

  Method 1: We will try the steps from the following link and check the result:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058?WA=wsignin1.0

  Method 2:

  To correct the errors that occur when you use Windows Update, install, and run the system update readiness tool. The tool analyzes inconsistencies on your computer and fixes as its current installation.

  You can view the following link to download the system update readiness tool and check:

  System tool update that corrects problems of Windows Update is available for Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Details of the event log to find what caused the Antivirus and Java to fail:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Hope that the information provided is useful.

  For any help related to this problem or any question of Windows, you can still display in the Microsoft Community Forum!

• Problem installation of update KB2556532 on Windows Vista 32 bit - stops configuration stage 3 of 3

  original title; Problem installation of update KB2556532 on Windows Vista 32 bit

  I had problems for the last two months trying to install the update to windows KB2556532. I have Windows Vista 32 bit.

  I had a virus that has been cleaned of my laptop. It was windows recovery of fraud, and I don't know if this could have caused the problem at first, but after you have cleaned the virus always impossible to install this update.

  She always says that it has installed ok, but then when the computer has restarted, it is located in 'Configuring Updates step 3 of 3..' he said then that the update was not installed correctly and is back from changes.  Once the computer has booted I am prompted to install the update again.  It continues in this loop.

  Can anyone help me please with this.  I can't online solutions for this problem, I looked for a few weeks to try and fix myself.

  Unfortunately if this utility installs not it is not that there is something corrupt or prevent Windows to install correctly.

  At this point you can try to contact Microsoft through these channels: https://support.microsoft.com/oas/default.aspx?gprid=11732&st=1 to see if they can provide assistance.

• Error message indicating the problem with the monitor of devices in Windows XP.

  Original title: Device Monitor

  Error message indicating the problem with the monitor of devices in windows xp. How to fix?

  Hello

  1. when exactly you receive this error message?

  2. What is the brand and model of your computer?

  3. What is the exact error message that you receive?

  Please provide us with more information about the issue so that we can provide you with the necessary assistance.

• problem with authui.dll after installing a windows 8 skin pack

  Hello

  I'll just run you through my problem, I installed a windows 8 skin pack which I initially thought was a product of windows (but it wasn't) after installation it forced me to restart my computer, it worked well but it didn't look right and my windows program of customization wouldn't work, so I used the uninstall program to uninstall files , but it was recommended not to remove the uninstall program so I didn't, after uninstalling it prompted me to restart my computer again once I did, when he got the login screen, a window popped up saying my authui.dll has been deleted or missing, and caused the logonui.exe to plant or does not work properly , so I turned off my computer in the only way that seemed possible that was to hold down the power button for 5 seconds, then I have it turned on and tried to get the menu of the OS and when it did my off usb keyboard so I couldn't choose Restore my pc, is there any other way to restore my pc? I have another laptop and a USB 4 GB if that could help. Also is it possible to re - install or recover windows uses a USB?
  OS: Windows Vista Ultimate 32 bit

  Hello

  Often, we see errors at startup as the result of a program of loading during the startup process.

  To solve these, we use the clean boot troubleshooting.

  The following article describes this process:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Please note that after refine us the cause, it is important that we return to a normal startup and manually delete the startup program.

  Best regards

  Matthew_Ha

• problem with write access to truecrypt readers windows 7. The mounted drive is not writing priveliges. Read-only. Cannot change in the security permissions.

  problem with write access to truecrypt readers windows 7. The mounted drive is not writing priveliges. Read-only. Cannot change in the security permissions.

  Hi amcop4591,

  1. How is - that Mount you the drive on the computer?

  2 Di you use any third-party tool to mount the drive?

  I suggest that you remove the external drive using the disk management and check back later if you can change the permissions on the drive.

  If you change the permissions, make changes to the permissions on the drive and then mount the drive.

  Mount or dismount a drive

  http://Windows.Microsoft.com/en-us/Windows7/mount-or-dismount-a-drive

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Blue Screen installation updates (KB2419640) & (KB2478935) for Windows Vista

  I get the blue screen when I install the above, and this update was 12/01/2011 and continues to reappear after I restore the system to January 9. So I turned off auto updates but isn't this bad since I DON'T want to prevent remote control?  What can I do to fix these two updates. No blue screen before these updates, but as soon as I say yes to reboot on blue screen. What is a L1T (level a techie) to do. I need this computer until I get a job!

  Thanks to the intervention of Halima S... I'm ready to tackle this problem without restoring the system. My only concern is that this command deletes previous restore dates and that the option is permanently deleted. However, first I have to print the steps to follow for a clean boot and re-read. I will work from there... Still down thanks!

  Hi Apple2DellExperience,

  1. are you able to install some other updates on the computer?

  2. what was the message on blue screen?

  3. do you have security software installed on the computer?

  It is not recommended to disable the automatic update.

  These updates will be revived again after the system restore.

  I suggest that you manually download and install the update, check if it works.

  Also, make sure you disable all the third-party program installed on the computer during the update installation process.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Update security for Windows Vista (KB2419640)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=13445E4A-099A-4EDD-864E-C44F42940500&displaylang=en

  Update security for Windows Vista (KB2478935)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=4EEAAD20-729C-4594-8853-E4AE55E9D491&displaylang=en

  Update security for Windows Vista for x 64-based systems (KB2419640)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=FD6B806E-50D4-4F4D-96E1-7C71FCA4C543&displaylang=en

  Update security for Windows Vista for x 64-based systems (KB2478935)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=B2839CD0-1958-4A22-9AAC-0E0AA8F2B52C&displaylang=en

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with the start time/Display Tune (r) / Vista Business

  Dear community of Mic,
  I have two problems that slow down my computer.

  (1) start time:
  After my computer starts, it loads quickly in the logon section. However, after I give my login information
  the HP computer HP monitor goes black for about two minutes, then the desktop.

  (2) display tune (r): after the desktop appears, I get an error box saying that "Display Tune (r) failed to load.

  I removed Display Tune (r) in the list of programs using the uninmstall tool in Control Panel.
  I even deleted display Tuner (r) additional files I found during a search.

  However, the error of Display Tune (r) appears after every start.  Even tried to reload the program, but to no avail.

  Any help would be appreciated gratefully.

  Thanks in advance.

  B.B.

  [Moved from comments]

  Hello

  Thanks for posting the request in the Microsoft community forum!
  It seems that the laptop computer goes to black screen after login section and the 'Display Tune (r) failed to load. To get these fixed issue, try the suggestions.

  You did changes to the computer before the show?

  Follow the suggestions listed among the links:

  Method 1:
  If you have any external device connected to the computer, you can try to unplug the external devices except the keyboard and mouse and check if the problem occurs.

  Method 2:
  Step 1: Try to start in safe mode and check is that the computer goes to black screen.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode then you can perform a clean boot and check.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 3 above to the Knowledge Base article.

  Method 3:
  If the problem persists, you can update all divers latest including the BIOS on the manufacturer's Web site and check if it helps.

  
   

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Note:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Please post if the problem persists, we will be happy to help.