Similar Questions

• Have problems with the Audio after upgrade to Windows 10

  I got a free upgrade for Windows 10 option on my laptop Acer Aspire SW5-011. Everything seemed to work fine, except that I don't bother checking the audio before deleting the files Windows 8... Even if the computer thinks that the Audio drivers work very well that they are not. I have tried everything that I could find online to see if I could get any sound, but nothing has worked. I updated the drivers, kidnapped rebooted and updated the drivers, I tried to find the other acceptable drivers and other follow-up steps. "When I go to reading tab in the sound and click speakers, and then I go to the Advanced tab, the default format said, ' 16 bit, 48000 hrtz ' is grey, I can't click on it and when I try to test it says:"Cannot play testtone" It's as if something prevents me from accessing or it acts like I'm not pregnant? The speaker driver is called "Intel SSD Audio Device. The audio worked fine before downloading. Is it possible to fix my Audio, or to have access to it yet?

  Good so I had to update my post because I had to give the good news! However, that is how I am and I almost try everything and tinkering with different things. My audio works now. I went back the download Acer drivers and manual for my camera and I checked under 32-bit Windows 8, which was windows available. I installed my ID which has been deleted before when I had restarted or any number of things, I tried, and then I went in Drivers and installed the Master Installer. I made sure that I extracted all the files before proceeding with the installation. After it restarted my laptop I heard the Windows startup sound and I knew that it worked because I had no sound at all before. Not sure why it worked, but it did! I felt there was some sort of missing file or a compatibility issue, I'm just happy that the program helped master installation. http://us.acer.com/ac/en/US/content/drivers/5687;-; SW5-011 #_ga = 1.21697787.1131678756.1448199856

• Satellite A300-1EG: problem with the touchpad after installing Windows 7

  Hello!

  I had a problem with my touchpad since I installed Windows 7 (64-bit version) on my laptop (Toshiba) A300-1EG.

  I tried many different solutions to this problem.
  I checked the alignment of the touchpad (be it on) in the BIOS, I tried to install several drivers (on a site of Synaptics, automatically by Windows) and none of these work. Of course, I tried FN + F9 key combination.
  When I check the alignment of the touchpad in the Control Panel, everything seems fine. It is written, that "device working properly.

  I have Toshiba Software, what may be the cause of the problem?
  But I have no idea where I can find something.

  I'd appreciate any help.

  I hope to be understandable - English is not my mother tongue :) Thank you very much in advance for any ideas. :)

  Hi mate

  I'm not quite sure what problem you have but you should first try to install the necessary drivers touchpad m.
  Maybe you used the wrong driver in the past

  So Sat A300-1EG belongs to the series of PSAG4E.
  The European driver Toshiba page does not provide a special touchpad driver for Win 7 for this device.

  But I noticed that Win 7 64 bit drivers touchpad (Alps & Synaptics) for Satellite L500 PSLS3E series is released on the European driver page.
  Try both drivers Touch Pad for this device and test it!

  Welcome them

• Problem with the rules after upgrade of the VM in foglight cartridge

  Hello

  There is a small problem with the rules after that I updated the VM cartridge level.

  In the default rules, I changed a few settings so that they will act as I need.

  However, each time I upgrade VM cartridge my rules are off and marked as backup.

  The question is: is there a way to upgrade the cartridge and keep my active rules after upgrading?

  Best regards

  Victor

  This is the normal behavior according to this KB article

  https://support.quest.com/SolutionDetail.aspx?ID=SOL105872&PR=Foglight

  105872 knowledge article

   
  • return

  • Title

    Backup rules fill in the dashboard management rule after Foglight upgraded

  • Description

    After that an upgrade of Foglight was conducted, several backup rules are created for rules that have been published before the upgrade. For example:

    Cluster VMW IO network
    Cluster VMW IO network (backup)

  • Resolution

    During the upgrade procedure, the FMS has detected that some of the original rules have been changed in some way. It copies the rules previously upgraded in backups, before trying to merge the contents of the update rule in the former.

    Assuming that the FMS works as expected, the rules of backup can be deleted. However, it is best to confirm this in the respect of the rules first before making deletions.

    When editing rules, particularly rules OOTB (out of the box), it is recommended to copy the original rule, disable the original rule and edit the copied rule. This should reduce the risk of the problem described in this Article.

  Golan

• I can not install Lightroom 6 after a problem with the pc and upgrade to Windows 10. "Errors occurred on your installation.

  Hello

  I am a user of Lightroom 4 since it came out and it worked fine.

  My system is based on a motherboard Asus Maximus III, the Intel Core i7 875K 2.93 GHz processor, card EVGA Geforce GTX 960 Graphics, Corsair Vengeance 8 GB of RAM.

  I used to have Windows 7 Home Eng 64 bit on it.

  After installing Lightroom 6 everything is fine again, but then the evil came:

  There was a problem with the pc, so I had to use the restore before installing Lightroom 6 point, bringing back me to Lightroom 4

  The problem is that somehow my internetbrowsers stopped working one by one. A virus? Norton was running, so it shouldn't.

  The restoration of an early version did not help the problem

  I needed the PC for work so I installed the free update for Windows 10

  Now, I can not install my Lightroom 6 more: it keeps giving me the following box:

  

  Of course stop the firewall did not help. Looks like a standard sentence as well.

  How to solve this?

  Thank you for reading.

  Settle in the right forum.

• I'm having a problem with the installation of update for Windows Vista (KB973768) security, error code 80073715's anyoe can help me?

  After getting my laptop to factory State, I ran the update of the window and got stuck to the update of security for Windows Vista (KB973768). The error code is 80073715. The update does not always settle anything I tried (reboot, download directly from the website of window, run the diagnostic window and solve problems). If anyone can help me, I really appreciate it.

  ERROR_SXS_MANIFEST_IDENTITY_SAME_BUT_CONTENTS_DIFFERENT 80073715

  The identity of the manifests are identical, but their content is different

  In a Word, there is a problem with component maintenance (EC).

  The information stored on the content of the file does not match what is present in Windows\winsxs.

  Try another attempt to update. If/when it breaks down, thanks for posting the * last * 50 or if WindowsUpdate.log lines in your answer:

  How to read the Windowsupdate.log file

  http://support.Microsoft.com/kb/902093

  In addition, please include the edition of Windows and the Service Pack level of operating system-

  For Vista \Win7, * right * click the computer on the desktop or the Start Menu, and then select Properties. The information is under "Windows edition".

  04/09 / 1107:46: 58 pm

• Problems with the installation of updates for Windows Vista security: error 80070490

  Having problems to install updates of security for Windows Vista (5 pieces) for months. Error code is 80070490. I have a lot of disk space and tried to repeat the time where there are no installation. I use wireless which is a power connection (seems to be the specific network), but connect to the internet using the cable has not solved the problem either. Help, please. Thanks for your time.

  Hi AndraP,

  Since these are updates important, even if you hide updates, you may need to install the update at some point.

  You can try to perform a clean boot and try to install the stand-alone package containing the updates.

  Step 1:

  You can perform a clean boot state.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Make sure that you put the computer to a Normal startup once you are finished with the installation of the update.

  Step 2:

  Once you have placed the clean boot the computer, try to install the stand-alone package of updates from the links provided depending on the version of Windows that you are using:

  KB2378111 for 32 bit - setting of security update for Windows Vista (KB2378111)

  KB2378111for 64 bit - update security for Windows Vista for x 64-based systems (KB2378111)

  KB967723 for 32 bit - setting of security update for Windows Vista (KB967723)

  KB967723 for 64 bit - update security for Windows Vista for x 64-based systems (KB967723)

  KB2345886 for 32 bit: Update for Windows Vista (KB2345886)

  KB2345886 for 64-bit: Update for Windows Vista for x 64-based systems (KB2345886)

  KB970430 for 32 bit: Update for Windows Vista (KB970430)

  KB970430 for 64-bit: Update for Windows Vista for x 64-based systems (KB970430)

  KB972145 BOF 32-bit: Update for Windows Vista (KB972145)

  KB972145 BOF 64-bit: Update for Windows Vista for x 64-based systems (KB972145)

• Satellite 1905 - problem with the touchpad after awakening from Hibernation/standby

  Greetings.

  I've known a few interesting problems with my Satellite 1905 - S301.
  Whenever he wakes up from hibernation/standby my touchpad stopped accepting "taps" as a click on the left button of the mouse. It works normally with finger motion detection, but stops at all but it is quite annoying to restart the machine whenever he returns from hibernation mode.

  I've done a small workaround and after I close the laptop lid still works but this isn't the way it should work, I would have preferred that she either Hibernate than running for 10 hours without any sense;).

  Can someone give me the solution to this problem, please?
  Thank you in advance.

  Kind regards
  Akar

  Hello

  I agree with you. It s very boring to restart the machine each time to use the touchpad.
  This problem appears on the first day?

  I think there might be a software problem and, possibly, the new installation of operating system recovery CD Toshiba could help.
  I know, the complete installation is not the best solution, but it might help.

  You should also check you the touchpad. Satellite 1905 - S301 was designed for the U.S. market and so I checked the American website for available drivers.
  It seems that 5.3.203.2 is a newer version of the Alps touchpad driver for Windows XP.

  I suggest to reinstall the touchpad driver and check if there is no improvement.

• IdeaPad Z580 trouble with smart touchpad after upgrade of Windows 8

  I own a Z580 Ideapad and upgraded to Windows 8 yesterday. I noticed that the smart touchpad stopped working after the upgrade. I installed the correct driver, Synaptics Touchpad Driver for Microsoft Windows 8 (32-bit, 64-bit) - IdeaPad Z380/Z480/Z580, hoping that it would work, but nothing helped. I also tried to reinstall/overwrite my existing 64-bit driver when prompted by my system to do so.

  Scrolling, pinch and side scrolling don't work at all. It is quite frustrating. Help, please.

  Hey guys lenovo recommends a clean install of windows on machines pad idea 8

  read this:

  http://download.Lenovo.com/Lenovo/content/Windows8/upgrade/IdeaPad/index_en.html

  And can get all the drivers for lenovo China site... use chrome to translate the page

  http://Support1.Lenovo.com.CN/Lenovo/WSI/modules/DriverDownload.aspx?SearchType=1&LogicType=0&Machin...

• Problems with the files after upgrade of Sierra

  Installed at Sierra 10.12 4 days ago on my 2010 IMac running Lion 10.7.5 did not a specific backup on the hard disk running on time machine assumes that the last backup should be sufficient.

  1 problem is that my 15 000 pictures present date instead of filing in the events as they have always been.

  2 mail seems lost several mailboxes that I had installed in the margin to quickly drag and drop INFO and interesting technical questions.

  3. I have a stream of photos don't drop-down after a few days, which will not go away it just keep reappears not no this that I still need it for.

  4 never used the cloud but considering buying iPad and dumping of my old Apple laptop not likely with the capacity of 128 GB.

  A year ago, Apple went from iPhoto to the new Photos app. If you have questions Photos I would re-post in this forum. Can be found the link to it by clicking on the Photos for Mac

  About your mail, try to rebuild your mailboxes and if this does not work, you may have to re-create the mailbox store that you had previously.

  On the planned purchase of an iPad, you have a question or was it just a comment?

• Tecra S1 - problems with the touchpad after update BIOS to 2.50

  Hello
  After the BIOS-update to version 2.5, the touchpad does nothing. From the docking station, the l' option option mouse PS2 works without any problem. Starting late, the touchpad no longer works. Normally - before the update - the touchpad began its work immediately after starting not rooted.
  What can I do to reactivate the touchpad?
  Juvenay clevain

  Hello

  Are you sure that your touchpad was not disabled?

  I mean the FN + F9 key combination to activate and disable the touchpad.

  This is why you should check this first.

  On the other hand a 3rd mouse driver part could affect the functionality of touchpad too.

  In my opinion, you should try to reinstall the driver for the touchpad and test it without connected part 3 mouse.

  Good luck

• Problem with the smilies after upgrade to 7.23.0.4

  After the upgrade to 7.23.0.4 new Skype smileys (as (bhangra), (rabbit), (red) etc.) are not displayed in cats but only the words in brackets instead of them.

  Please, continue to release new versions with bugs!

  After upgrade to 7.23.0.105 all the smileys are displayed well.

  Even without disconnection/connection.

  Thank you!

• I have a problem with the transfer of files from Windows Vista to Windows 7.

  Original title: transfer files from Vista to Windows 7. Type of processor

  I just bought a new computer which has Windows 7.  I am trying to transfer the processing of speech and spreadsheets from your old computer to new th but all I can manage is a file of jarbled letters on a program called Word Pad. Can someone tell me if there is a secret code for this?

  Windows is NOT equipped with Office installed. You must install your copy of Microsoft Office on the new computer.
  And how on EARTH this has nothing to do with Windows 7 security, privacy, and user accounts altogether, I can't see...

• Problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200

  Am having problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200

  * original title - I'm having a problem *.

  You have the latest drivers?
  http://www.nvidia.com/page/support.html

  Aero - Windows 7 - How to troubleshoot problems with Aero

  (1) first of all, click on the Start button and type in Aero. Now, click on find and fix problems with transparency and other Visual effects of link.

  (2) a new Wizard dialog box opens. Make sure that you click Advanced to solve all problems automatically.

  (3) either the problem will be solved or not. If this isn't the case, you will get a list of items that are potential problems.

  (4) If you want to see more details about the problem, you can click View detailed information. This will give you a list of potential problems that have been verified and those that pose problems.

  If it does not---> click Start---> right click computer---> click Properties

  Click the link for 'Windows performance index' and then click 'rerun the assessment"to refresh your WEI score and try again.

  Note: If you have Windows 7 Starter, or if your system does not meet the requirements for Aero you will not be able to use Aero.

• Problem with the touchpad doesn't work is not on the computer.

  Today, I was on YouTube, listen to music, when I turned the volume up to full. My laptop (ASUS) is a VERY high - pitched shrill sound that would not stop until I turned the laptop on sleep. When I turned on the laptop back, the screeching stopped but my Touch Pad stopped working. Fortunately, I have a USB mouse which I use now. I tried following the instructions to activate the keypad, but it does not work. I restarted my computer, and that did nothing.

  Help would be GREATLY appreciated.

  (also, I had problems with this laptop in the past, involving having to solve every time turned to have internet access, but a day that goes by and now the internet accessibility works very well.)

  Hi Lucie,.

  Thanks for posting your query in Microsoft Community Forum.

  What is brand and model your computer?

  Problems with the touchpad can occur due to a number of causes, including cables that are not connected properly, lack of updates, corrupt or drivers incompatible or because of hardware problems. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Try to run the suite of equipment fixit and see if the problem still occurs.

  Hardware devices do not work or are not detected in Windows

  Method 2:

  See the additional steps provided in the following article.

  Mouse, touchpad and keyboard with Windows problems

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.