Problem with installing windows xp the drive mounted iso in windows 7

Similar Questions

• I was referred to this site. Problems with installing Windows on the new drive.

  Greetings!

  I just installed a new hard drive on my Mini 311 1037. I bought the HP recovery discs. The operating system is Windows 7 Home Premium (I guess it was the correct operating system for that computer). The installation seemed fine, but after installing the drivers, I get the message, "Windows Setup could not configure windows to run on a hardware on this computer."  Then after the restart, after the initial windows screen, I get a message that says "Windows cannot complete the installation. To install Windows on this computer, run the Setup again. "I atempted to iireinstall 3 times. All diagnostic tests are good: the hard drive, the memory. I have no idea what to do next. Help, please?

  If you can read the Microsoft Windows 7 of 25-character license key, you can download a Windows 7 ISO file to burn to a DVD or USB flash drive. The version must match that's installed on your PC as shown on the sticker COST Microsoft fixed on the bottom of the laptop. Like Windows Home Premium.

  Links to downloads of Windows 7 ISO files:

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Use the installation of Windows 7 USB/DVD tool to convert the ISO file you download. Link and instructions below. You need to a DVD + R or DVD - R. Or a flash drive 4 GB to use the USB method.

  http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool#installation

  Use 25 characters on the COA key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then, go to the page support and driver to install the drivers you need.

• Problem with installing Windows on a hard drive, HARD drive does not get detected after installation

  Original title: help with hard drive of the computer.

  Flow of the problem:

  My aunt tried to install windows 7 on the previous copy of windows 8. Needless to say that it doesn't work and it has messed up the hard drive. So, I bought a vacuum. I formatted the hard drive using my other windows computer to have 2 partitions: a boot partition and system partition, and then used the program WinToUSB to install windows on the hard disk. The reason I did it is, because no matter how many times I changed the BIOS in my laptop of aunts, it wouldn't boot from the DVD player to load the windows software. After a few hours, I found WinToUSB. Once windows has been installed, I plugged it into the laptop. For a few hours, I didn't know what to do, because the computer does not recognize the hard drive (he said: "Not detected"). I decided to start from legacy, and then the screen deals

  «intell...» »

  and a bunch of dates, etc all the stuff on the screen to load legacy if you know what I mean.

  He said "not plugged in the media. Check the power cord.

  Then quickly changed screen before I can read almost anything and it goes to the normal windows screen black (with 4 colors). I said to myself, how can he be loading if the hard drive is not detected... Once it is loaded, he brought me to the blue screen (blue screen of death, if you want) I turned the computer on again, always noticing the hard drive was not detected. I ran all the recovery/repair options I could and turned off the laptop. I came back a few hours ago and I loaded the computer again and went into the BIOS.  He said that the hard drive has been detected and said the news about this, as usual. However, at the start of the legacy of windows loading screen, it said still not detected.  I then started to windows to see since it is now detected if that fixes the blue screen. Yet, there is no. I tried to go to the normal windows and screen remains blue. any ideas?

  Hello Chris,

  Thank you for visiting Microsoft Community.

  According to the description, it seems that Windows was not properly installed on the hard drive. I'm not sure how to work the software from third-party manufacturers WinToUSB and reliable installation process is. Microsoft does not recommend using any third party tool to install Windows on your computer, the use of these third-party tools can cause serious damage to your computer.

  I would say to format the hard drive once more and try to install Windows through normal Windows installation process.

  Refer to the section "using the installation option custom if no operating system is installed" in the thread below.

  Installing and reinstalling Windows

  http://Windows.Microsoft.com/en-us/Windows/installing-reinstalling-Windows#1TC=Windows-7

  If you are not able to install Windows on the hard drive at all, I suggest you to contact the hard drive manufacturer to obtain a diagnosis of material performed on the hard drive.

  Do not hesitate to write back for any further assistance with Windows, we will be happy to help you.

• Problem with installing windows

  Hello

  I bought my turn dell Jan/13 with original operating system (Windows 8). Last week, I got some problems with his knees. so I decided to re - install the operating system and upgrade to windows 10. I downloaded the 8.1 Windows and installed successfully but the problem is it of not accept my key. What should I download windows 8 and install it again. or is there a way around?

  You need not go to 8.1 Windows if you want to go to Windows 10. use of creating media tool to update your system.

  If you can't get Windows 10 to get 10 app windows or Windows update, you always have the option of ISO to upgrade.

  Download Windows 10 media creation tool

  Simply select this option of PC/improvement.

  After you download the Windows 10 installation files using this tool, you can upgrade your existing 10 Windows operating system, or you can create the bootable USB drive or DVD to install Windows 10 key later. You can also save the installation files to the ISO in offline mode file format, if you wish.

  

  (Askvg.com)

• PROBLEM WITH INSTALLING WINDOWS WINDOWS XP SP3 PRO 8.1

  When I try to install the full version of Windows Pro 8.1 on my computer drive I get two error messages.

  1 point entry procedure '_CxxFrameHandler3' not found

  in the "msvcrt.dll" dynamic link library

  [2] the file 'autorun.dll' could not be found or is damaged. Error code is: "[the 0x7F]."

  How do I fix errors on my Windows XP so I can download Pro 8.1?

  Any help would be greatly appreciated!

  Hello

  Follow these steps until you try to install Windows 8/8.1.

  Check if the manufacturer of your computer/laptop has Windows 8 drivers available for your model.

  If this is not available, Windows 8/8.1 not install and work properly for you.

  Download and run the Windows 8 Upgrade Assistant of to see if your machine is compatible Windows 8:

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  "System requirements" Windows 8 ".

  http://Windows.Microsoft.com/en-us/Windows-8/system-requirements

  See you soon.

• Problem with installing windows 10

  I have windows 7 Home Basic. I booked and download windows 10 to get windows app, but after 3 gb of download all he stuck to "preparing for install" for two hours... so I cancelled that and restart my laptop... now get get windows app icon disappeared, and from windows update it's once again the 0% download... now what I can do... If I redownload and even happen next he be waste of time and money... is it you please help

  Please be aware, even if you do not get the Windows 10 app, you can always download Windows 10 as one. ISO file, create a bootable copy and update your system.

  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  See the instructions: How to download official Windows 10 ISO files

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

• Problems with installing Windows Update 8.1

  Good afternoon

  I tried to update Windows 8 to 8.1 twice. Each time, the computer shuts down during installation. When I restart the computer and the installation is complete, the computer remains on for 10-15 minutes and stops. This forces me to re - turn on the computer, log in and continue my work. However, the computer stays on for about 10-15 minutes once I connect before it stops. I don't know what the problem with the update. Please provide some guidance.

  Thank you.

  Thank you for the update.

  Press the Windows key + X , and then click System

  Click Windows Update in the lower left corner

  Click change settings and choose the option in the menu drop-down, and then click OK

• G50-30 problem with installing windows 8 or 10

  When I bought my laptop personally, I did not win 8.1 and I format and install win 7. but now I want to install win 10 and when I make a bootable flash drive with earn 10 hollow microsoft media center tool when the installation begins, sure I'm stuck the first screen where I choose my language and region settings. The problem is that I do not see my cursor or my keyboard does not respond to all the niether the capslock light lights up or the Numlock.

  All you have to do is
  Enter the bios to go out and choose other OS
  Then set default load
  Then go back yo configuration and disabled access key
  Save and exit
  It will work

• When I try to install an update to iTunes on my Windows 7 computer I get the following message: "there is a problem with this Windows Installer package. A program required for this install to complete could not be run. "Help, please.

  When I try to install an update to iTunes on my Windows 7 computer I get the following message: "there is a problem with this Windows
  Installation package. A program required for this install to complete could not be run. "Help, please.

  Hello..

  Try this support article > If you see an error message "Windows package install" when you try to uninstall iTunes from your PC

• Windows Installer error there is a problem with this windows package install. a program run as part of the set up did not complete as expected "during the installation of Itunes

  Original title: problem WIndows Installer to install the latest version of i tunes

  When I try to install the latest I tunes version 10, I get a message "there is a problem with this windows package installer. a program run as part of the set up did not complete as expected "the downloads version, but will not be installed."  How can I fix?  I have an earlier version, but I need to update to use my i pad.

  Hello

  You can try the steps of troubleshooting provided in the link below and check if the problem persists.

  Problem installing iTunes or QuickTime for Windows

  http://support.Apple.com/kb/HT1926

  To get help on the issue, you can get in touch with support for ITunes.

  http://www.Apple.com/support/iTunes/

• SE error message: "there is a problem with this windows package install." A program required for this install to complete could not be run. Contact your provider staff or the support package 'after updating to iTunes

  Original title: after recent update, the installation software WONT work properly! Help!

  • I am in desperate need of aid. I didn't something again on my computer, but these recent software updates. I've recently updated my my itunes and from itunes then will opens not or install it. It was working fine before that was last updated, but now used. I tried to uninstall several times, in a variety of versions. Still nothing. Is not specific to the user and system wide as well.

    I get a message saying "there is a problem with this windows package install." A program required for this install to complete could not be run. Contact your supplier of staff or the package of support ".

    Anyone know what I need to do? Or how to fix it?

  Hi MxGurl,

  If this occurs after the installation of update Itunes, then go to the following link and check if it helps.

  iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits unexpectedly, freezes, or launch issues

  http://support.Apple.com/kb/TS1717

  If this does not help, you should contact Apple support or post in the Apple discussion forums.

  http://discussions.Apple.com/category.jspa?categoryID=149

  You can also check out the following link and try the steps by Suresh I Support Microsoft, moderator and Andre.Ziegler and check if this may help

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/11f4e2c0-0595-4c7f-8579-e52d2c4bf36c

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When you try to download iTunes I get the following error ' there is a problem with this windows package install a program required for this install complete could not be run.

  Problem Windows install

  When you try to download iTunes I get the following error ' there is a problem with this windows package install a program required for this install complete could not be run.

  I looked at several forums and tried cleaning patches, etc they suggest.  I also tried to download Windows Installer 4.5 but keep says "the update does not apply to my system" (I tried all.)

  I am running Windows Vista and have downloaded the service pack 2 (one remedy suggestions!)  Someone out there has a solution?

  Hello, Atwitsend...,

  Try to repair.
  Go into Add Remove Programs, then select Apple Software Update > change > repair.

  If this does not work, try to uninstall. .

  Remove and reinstall ITunes, Quicktime, and other software components
  http://support.Apple.com/kb/HT1923

  Download the iTunes Installer and save it on your desktop.

  http://www.Apple.com/iTunes/download/

  Try to install iTunes using the installer that you saved.

• try to install microsoft applocale gives the error: "There is a problem with this Windows Installer package"

  Microsoft applocale

  I tried to install this microsoft applocale. But I can't install it successfully. It showed "there is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your supplier of staff or the package of support ".

  What can I do to install microsoft applocale?

  Thank you.

  AppLocale can be installed on WIndows Server 2003 and Windows XP.

  See "Important notes" on http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=13209

• Error: There is a problem with this windows package install. A program required for this install to complete could not be run. Contact your supplier of staff or the package of support ".

  I tried to update my iPhone to the latest version, but when I tried to download the latest version of iTunes, it gives me an error in the middle of the download, which says:
  "There is a problem with this windows package install." A program required for this install to complete could not be run. Contact your supplier of staff or the package of support ".

  Then I opened my old iTunes again and tried to update my iPhone once again and then he started to back up my iPhone and delete the existing version if it might update the last being but then I got an error saying he needs the iTunes 9.2 update my iPhone. So I'm stuck with my iPhone can not be used and I can't download the new iTunes also. Please, need help on this issue?

  Thanks in advance.

  Now iTunes10 is underway, I downloaded and everything seems to work very well.

  Thank you.

• Impossible to uninstall Apple Software Update program, get the error "there is a problem with this Windows package install."

  I need to uninstall the Apple software update program, but cannot.  Message reads as follows: "there is a problem with this Windows package install."  A requirement of the program to complete this installation could not be executed. Contact your provider to support personal or package.  I have Windows 7 Professional.

  I need to uninstall the Apple software update program, but cannot.  Message reads as follows: "there is a problem with this Windows package install."  A requirement of the program to complete this installation could not be executed. Contact your provider to support personal or package.  I have Windows 7 Professional.

  Hi, CA Bill.

  Start the Windows Installer service.

  1. Click Start, type Services.msc and press [ENTER]

  2. double-click on Windows Installer.

  3. set the Windows Installer to Manual startup type.

  4. Click Start to start the service. Note the error message, if any.

  5. click on OK.

  Start uninstalling software Apple

  If the above fails, use CCleaner uninstaller

  http://www.Piriform.com/CCleaner/screenshots

  See the help link - below
  To remove, and then reinstall iTunes to windows 7.

  http://support.Apple.com/kb/HT1923

  Web site support Contact Apple for additional assistance on the issue:
  http://discussions.info.Apple.com/index.jspa

  OR http://www.Apple.com/support