Problem with Jolt Repository edition

Similar Questions

• Does anyone have problems with playback when editing v9.2?

  I have problems with playback when you change a small project (4 min).  I had a few problems on previous projects, but this one is particularly bad.   When I read my edition, the (unique) audio plays normally but video lags or freezes completely.  I can get around it temporarily by parts of the sequence rendering, but that's a lot of time and as soon as I make a change, the problem reappears.  I updated drivers etc. After reading the other reviews but it now becomes impractical, and I'm seriously considering whether I should continue with first or look for something more reliable

  PLUG

  Samsung Chronos i7 with 8 GB of RAM and a lot of spare

  WIndows 10 build 10586.218

  First Pro 9.2 zigzag

  Pilot of 640 M from NVIDIA Ge Force GT 353.90

  

  The only area I think needs expansion is the disk configuration.  Here's what I recommend as a starting point.

  C: Windows and programs

  D: project files, audio, and still images

  E: cache and Scratch

  F: media camera only

  G: export

  In addition, a form of backup solution in place.

  The above will give you excellent disk performance, spreading things to prevent the creation of a bottleneck.  It is based on the use of the HARD drive, simply because they always have the best bang for the buck.  But if you have the scratch for some good sized SSD, the situation changes a bit.  You could probably combine D and E on a single SSD and F and G on a third party, without slowing things down significantly.

• Hello, I have a problem with the www edition Edition of Adobe® Muse™ CC in the browser.  I can not connect.

  Hello, I have a problem with editing in Adobe® Muse™ CC www in the edition browser I can not connect. It is on the alert: "there was a problem reading the file of Adobe Muse CC manifest for the site. Since Adobe Muse CC use file > load on the FTP host... to export the site again. "- but nothing has changed, when I downloaded the site once more.   Help, please...  It's very important for my client...

  Would you be willing to share this site you see this error with? If you don't want to share publicly, you can email me at [email protected]

• Problem with Hyperion merger Edition Installation

  Nice day!
  
  I need assistance with the Installation of Hyperion.
  
  Whenever I try to install Hyperion merger edition in my PC, most of the components failed to install. Essbase, Foundation and planning are the only components that are installed successfully. Strange, I could install and run the same product on the same pc before. The PC has not formatted or anything. I just uninstalled the product, deleted the folder Hyperion uninstall WebLogic 9 and when I installed it again (fusion edition Hyperion), other components could not be installed.
  
  I could install Hyperion merger Edition on my VMware Server, but I need to install it on my physical computer. It runs slower on VMware.
  
  Help, please.
  
  Your ideas are much appreciated.
  
  Thank you!

  Hyperion is weird. the solution to your problem is to install and configure each product separately.

• Problems with the tabs (edition of the index) - CS4

  I'm lle establishing a cumulative index of 136 pages for a magazine and I would like to limit the amount of handwork as much as possible. The paragraphs that are set up with a. 875 "withdrawal right and a-. 875 "final withdrawal line, which helps keep the entries to encroach on the space where manifest. However, I still see cases where the entries do not meet tab stops as I'd like (see below).

  Is there a solution that will keep the text being the subject of a push into the gutter without having to manually forced line break me? Techincally, it is the last line of the paragraph, so there is nothing to make it "hang up" as I want. Ideas? Will I set up my tab stops incorrectly?

  

  Good, I think that I have a solution that can be applied with find & change only.

  1 Add a tab in the tab rule, just before indentation of law:

  

  You must do this for all styles, if not every style is inspired by a common base style.

  After that, the document goes out of whack:

  

  2. use search and replace: GREP to search it

  \t(?= *\u\l\l/\u\l\l \d\d)
  

  and replace with this

  \t\t
  

  with the addition of the attribute of No Break.

  

  3. now, it should be fixed - nothing extends beyond the tab that you just put

  

  4. it creates a new problem, however. (I spotted just in time, too.) Look at the points - the "left half" is "BOLD", probably taken from the text in bold, half right is not, and there is a small amount of space between two tabs. Don't panic: apply a character style to all the tabs, using a GREP style:

  

  -You can simply add this to your paragraph styles.

• Problems with float [subject edited by Moderator]

  Try floating class to the section on the right with css and floats unselected footer with the h2 tags and paragraph, I have included in the section.  I'm new on this and have worked for hours to solve this issue.  Can someone help me?

  Apply some css to your foot of page-clear: both;

  This should have the effect of forcing the footer in the right position.

  If your cancellation and section are wrapped up in their own container you could apply some css to this container - overflow: hidden; who will have the same effect to force the footer into the right position

• A problem with the standard edition of synonyms oracle 12 c on linux.

  Hi all

  I created a few synonyms for a user to access the tables little.

  but unfortunately he is not able to view the user tables.

  Here's the syntax I used to create synonyms AS SYSTEM USER on oracle 12 c.

  create synonym WALLACE. DEPT_LOSS_RUN for the USER. DEPT_LOSS_RUN;

  He has successfully created, but WALLACE users NOT able to access / view on it.

  All the expert advice on that.

  Thanks in advance

  See you soon

  > do I have to give select grant Wallace for all 700 tables?

  Everything is forbidden; except what is explicitly GRANTED.

  COIL NEW_GRANTS. SQL

  SELECT "CHOOSE GRANT MARKET | TABLE_NAME | "AT WALLACE;" FROM USER_TABLES;

  SPOOL OFF

  @NEW_GRANTS. SQL

• a text box is every moment that I edited dynamically scroll bar upward. I know that's not a problem with the Web site because she works with other browsers

  There is a problem with scrolling of a text box bar. whenever it is changed dynamically developing area moves upward instead to keep the focus in the area of the new inserted text. even if I move it down to hand it back again.

  OK, I have fixed the code in my program. When I finished the editing, I use this code in javascript.
  document.getElementById("chatMainTxt").scrollTop = document.getElementById ("chatMainTxt") .scrollHeight;

• Problems with the help of control Edit Expression with tab control

  Hi all

  I am facing a strange problem when using Expression Edit Control with a tab control.

  When I put the Expression of the RichEdit controls on several tabs in a tab control, and when I run the application, the Expression Edit controls in a single tab are visible, others get invisible! I do NOTHING with them, but they do not simply show upward!

  I first faced this problem using Expr editing controls in Visual Studio c#. NET - with tab controls. For verification, I created a simple VI is LabVIEW to see if the problem is with my request / problem with Expression Edit controls in c#, etc. But voila!  A similar behavior in LabVIEW too! 

  I'm doing something wrong? OR do not do something right? Ask someone for help please ASAP!

  Thanks a ton in advance!

  DASI

  PS: Attached the VI here (LabVIEW 8.5) just download and run it, and you will see probably what I'm talking about!

  
  

• Problem with window painted and scrollbars when editing (LabVIEW 8.0.1)

  I'm under LabVIEW 8.0.1 in Windows XP SP3.  For my main VI, I came across a strange problem about 5 months ago.  The front window - both in edit mode and run mode - arrested repaint itself on the right side which is no longer visible when you scroll from top to bottom, but also visible overlapping Windows.  Coinciding with the repaint problem, both bars scroll search disabled grey arrows and no boxes in the bars that you can click and drag to scroll the window.  The scroll bars work still partially if you pass the mouse over it and roll the mouse wheel but does not work by clicking and dragging.

  The façade has a lot of controls and indicators, including containers of tab control and is greater in the horizontal directions and vertical so the two scroll bars must be active.  But I deleted everything in the Panel before and everything in the schema and the problem persists.  If the problem is not directly related to a control/led display.

  I saved the simple VI to this problem (using a line of large text and a high box rounded to test), and then created a new VI and copied the two elements at the new VI.  This new VI didn't paint it and the problem of the scroll bar.  The two screws are slightly different in the memory usage and the revision number (bad is review 1785 and the good is revision 3), but otherwise the two screws are identical.  I have attached two screws at this announcement.  When you first open the bad VI, you will see the scroll bars disabled while the good VI has active scroll bars.  To replicate the repaint problem, scroll the window up and down with your mouse wheel.  If it's good when you first open the VI, click on another window, then click on the window of VI and try again the mouse wheel.  This by clicking sur-loin-and-return always causes the problem of repaint for me.  I tried the screw on two different computers, both running Windows XP SP3 and LabVIEW 8.0.1 with identical results.

  Here's what I discovered simple troubleshooting with the screws:

  always off scroll bars

  * repaint the problem in the main window for larger then 680 pixels of window widths

  * repaint the problem in the menu bar of the main window for widths of more than 646 pixels

  * entire window becomes disabled than 1348 pixels window width

  * can paint window minimize and restore, but only repaints only once

  * scrollbar boxes sometimes flicker in the display, but then disappear

  * Scroll left and right hovering mouse over the bar and horizontal scroll by using the mouse wheel

  I found something similar on this forum (thread: problem with refresh of façade)-it could be linked to the CAR on the Panel being offset internally.  I don't have access to LabVIEW 8.5 or later and do not plan to upgrade - I have not tried the trial version, as this user has done.  I could try to copy and paste my set of the block for a new VI diagram but the VI is so important I'm afraid something would break, plus I don't want to do it again in a few months.  The problem seemed to occur after a certain number of stops (or revision number).  I save copies of backup often and when the problem first happened, I was able to go to a previous version, make the missing changes and save it without any problem, but this only delayed the problem and he came later.  It is therefore perhaps the revision number.  It seems not related to a change or a particular addition in the front panel and the graph.

  The attached picture shows the repaint problems and scroll bar in bad VI.

  This raises a question I have - if this problem is a bug has been fixed in 8.5 and later, is it possible to apply bug fixes for older versions?  Or what I need to pay for an update fix these bugs?

  Seems that something got corrupted with this VI. Things to copy on a cool VI and things should be OK.

  See also this recent report of a similar problem.

• A problem with Windows Server 2008, Enterprise Edition

  Hi, I have a problem with ad on windows server 2008 Enterprise that when I try to install active domain services directory for me this message appear:

  
  
  http://img826.imageshack.us/img826/7508/39552832073804633241230.jpg
  
  Notice: I'm sure that password is complex and I erase and I disabled complex password policy and it appears again.
  Anyone has a solution or this problem before him

  Hello mohammedtayea,

  The question you have posted is related to Windows Server 2008, Enterprise Edition, and would be better suited to the TechNet ITPro community.
  Please visit the link below to ask your question in a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Thank you

• If win 2003 is upgraded for the 2008 edition, it will fix alingment compensate for the problem with the SAN disks?

  If win 2003 is upgraded for the 2008 edition, it will fix alingment compensate for the problem with the SAN disks?

  Hi elvirkaric,

  Your question in Windows Server 2008 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/threads

• "Delayed write failed" message keeps appearing to external hard drive (WD passport) and problems with suggest fix kb908673 (register edit).

  I had problems with my WD usb hard drive, where a "delayed write failed" message keeps appearing when the transfer of files to or from it. Among the fixes suggested on the WD support site is a link to kb908673, and this seems to sum up my problem. This fix is included in sp3, I believe, however, the fix indicates that a manual registry editing needs to be done;

  "After you install this hotfix, the following registry subkey is automatically added and configured:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\USB\EnSoftRetry

  The registry key is configured with a DWORD value of 1. This value allows the Soft-Retry code path that is used in this hotfix.

  "If you install a later version of the patch (a patch that contains later versions of Usbport.sys and Usbehci.sys), including Windows XP SP3, this registry value not be automatically added and configured. The registry value must be manually added and configured as described above to activate the Soft-Retry code path that is provided in this hotfix. »

  I don't have this registry subkey and have no idea how to do to configure a key to have a DWORD value - I can create as a registry entry DWORD value in this key, but it must be given a name. Should I create a DWORD value called "EnSoftRetry" in the USB, or should I create a DWORD value in the EnSoftRetry key and, if so, what should it be called? Or am I completely misunderstanding something here?

  (1) manage devices

  (2) find each host EHCI USB controller

  3) click on USB EHCI host controller Details of the

  Highlight 4) Device Instance path

  (5) copy "Device Instance path«path information in the Notepad for quick and easy access»»

  (6) open Regedit

  7) click "HKEY_LOCAL_MACHINE."

  8) click on 'SYSTEM '.

  9) click on CurrentControlSet «»

  10) click on 'Enum '.

  11) click on "PCI".

  (12) click on ' * the folder that corresponds to the stage 4 information.

  (13) this is where you should be now: "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\PCI\------\Device Parameters.

  (14) right click on 'device settings '.

  (15) select "new-> Key".

  16) enter the field of naming the new key 'EnHcSoftRetry '.

  (17) right-click on "EnHcSoftRetry"the ket has created "

  (18) select "new-> DWORD (32-bit value).

  19) enter the field of naming 'DWORD '.

  (20) right click 'DWORD '.

  (21) select 'change '.

  (22) entry in the field value '1' Base of Hex

  (23) close regedit complete process :)
  

• Windows XP SP3 Professional Edition problems with the Live Essentials tried almost EVERYTHING please help...

  I am running Windows XP Professional Edition and have tried almost way possible from almost all of the codes, so that it can install. He always tells me a different code almost as something it must not 'dismantling' MSE. I am not certified has + by all means! But I do not know when you searched for sites Microsoft etc., you are looking for better & learn yourself. But I'm at the point where I say "I wanted I had saved the old Version of the WLE who worked great." Just to give you a clue, which hopefully will help me can govern this list I've done on:

  1. search and read questions from other people who were identical and followed step by step, when I received him seemed to be more common error Code. He said to download update Windows Cleanup Utility and remove everything said Microsoft Live in there. I did this and it just via a different error Code

  2 I tried to download directly the WLE "integer" and install it

  3 I am the admin. and always "Ran under" admin

  4 I watched the system requirements & everything I had was compatible, even if I n "t SQL, but went and downloaded and installed, it

  5 I ran in safe mode, and keep in mind that I do every time a cleaning in the place where there is no trace of even the new WLE Installer, b/c I read learned that you cannot leave this trace.

  6 and to be honest, I do all this work b/c I think WLE possesses one of the in my opinion, best photo library it y a. quick, simple, but still has all of the improvements that I use direct mail and really liked the MS Outlook 07 connector is what I have right now.

  7 I've never seen a free software that is so sensitive that it need to go through all these steps

  -Thoughts on any other reasons to help, I would take even the older edition if I could find it, but as soon as I eliminated and did a cleanup & reinstall my hard drive, it hit me. I forgot to record the show and then, think it is free I'll get it online but it has been updated and I need help which is much smarter than me, I will not STOP until I know what and why. BTW, it is not a problem with a firewall or anything b/c I disabled Norton and am MSE tent which was / is child's play, it's not dirty space, but it does the job and it's great and that's why I want the photo gallery for the least and Sync Mail to Outlook.  As I have said that I have nothing else, I know to do, I even tried on another computer running the exact same OPS than mine. And it's the same way. ??? Please help me to get someone...

  Thank you very much in advance for any help other than that described previously, or if someone from Microsoft could remotely help me if it is possible.

  -CM-

  Hmm. check that you can start the Windows Installer service and it is enabled.

  1. Click Start > run...
  2. Type cmd /K net start MSIServer
  3. Press enter and monitor messages in the window of the console open.

  If the service is started successfully, then download the offline version of the WLE from here and try to install it. Select all items to install because they are dependent on each other.
  Download the new log file, if it fails to install again.

• Problems with upgrade from Home Premium to Ultimate edition

  I recently received a copy of Windows 7 Ultimate edition of my college and have had problems with the installation process. I listened to what most people tend to do and got the Windows Anytime Upgrade. I entered my key in this program, and he asked me to make what is called the Windows Upgrade Advisor. Currently, I forgot my key for the upgrade because I received the ultimate edition of a download of my college so when I tried to return the process again I hit a roadblock. When I run the Upgrade Windows Advisor he tells me that my computer can run windows 7, but when I go to install the I get an error when I try to do the Upgrade Version (I have not tried the customized version because I don't want to lose all my files that are not saved) tells me that I have to use Windows Anytime Upgrade.

  What do I do?

  Check your email for college for your product key.

  ==============================================

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  -------------------------------------------------------------------

  (A) if at any time the upgrade fails: run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  --------------------------------------------------------------------

  (B) If Internet Explorer is not configured as default web browser,
  you need to make sure and try the Express upgrade.

  --------------------------------------------------------------------

  (C) stop and restart your computer.

  (1) implementation of the reinforced system - method #2 tool (download and run the tool: "Checksur.exe")
  http://support.Microsoft.com/kb/947821
  (System resources, such as file of data, even in the data memory and registry data, can develop inconsistencies during the lifecycle of the operating system. The system update tool attempts to resolve these inconsistencies).

  (2) disable any security software before attempting to upgrade

  (3) disconnect external devices of unneccesarry.

  -------------------------------------------------------------------

  (D) if still Anytime Upgrade fails, disable the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4 restart the computer

  5. repeat the process "Anytime Upgrade"

  To start the upgrade process:
  Click on start/search and enter the words: Express upgrade
  Then, in the list of the search results, click on "Windows Anytime Upgrade".
  Then follow the prompts on the screen anytime upgrade.
  Basically, all you need to do is enter the Windows 7 upgrade product key.

  Another method:
  (Located at the top right) Start/Control Panel/small icons option / click the "Windows Anytime Upgrade".

  -------------------------------------------------------------------

  (E) if it continues to fail, try the following 3 methods:
  Method #1
  (1) run Chkdsk and see if it helps.
  Click Start / type: CMD and right click 'CMD' and select 'run as administrator '.
  At the command prompt, type: chkdsk /f /r
  Restart your system, hard drive of your computer is analyzed to find errors and will try to correct them.

  (2) run the Memory Diagnostics to look for problems with the system hardware. Type of memory in start search and press ENTER to open the memory diagnostic tool open. Click restart now and check for problems. Your computer will restart and will start the diagnostic program. Please note the reported errors.

  Method #2
  1. click on start, type: "msconfig" (without the quotes) in the box and then press the ENTER"" key.

  User account control permissions: If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under "Selective startup", uncheck the "Load Startup items".

  4. click on the 'Services' tab, click to select the box "hide all Microsoft Services" and then click on disable all.

  5. click on 'OK '.

  6. When you are prompted, click "Restart."

  7. once the computer has been restarted, check if the problem is resolved.

  Method no. 3
  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:

  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  - Express upgrade may not work for all versions of Windows -

  Note: Retail 'Full' or 'Upgrade' product keys will work when you use the Express Upgrade feature.
  Upgrade Express 'can' not work (check with the manufacturer of the computer support team) for users who have some OEM and or the Integrator product keys, This also applies to VL (Volume License)-MSDN Academic Alliance (MSDNAA) or product keys that do not work and take over the Anytime Upgrade option. KMS users should consult with your administrator before attempting to perform an Express upgrade.

  J W Stuart: http://www.pagestart.com