Problem with loss of files in Dreamweaver after that that they were saved.

Similar Questions

• problem with adding line in tabular form after that put 4.1.1 to level

  We have recently installed the Update 4.1 .1. We now have a problem with some of our tabular forms created using the wizard. The delete and update feature works fine, but when trying to insert a new record, it will insert only the first record, but after that, it will no longer inserts. It acts as ApplyMRU (updated online Multi) is not at all shooting. No success or error message. I tried to create forms based on the rowid and also on the suites (with and without triggers), and they all behave the same way.
  
  This happens both in IE and Mozilla. Tabular forms were working fine before the upgrade.
  
  Everyone knows this?

  We just hit this issue and thanks to this thread and a light bulb above my head, resolved this question today. There is more to the story. Copy the necessary images in place works, but get the full version 4.1.1 images.

  We were already on 4.1.0.00.32, so I applied only Patch 13331096 upgrade to 4.1.1.00.23. Patch 13331096, at least one that I downloaded a few weeks ago IS NOT ALL OF THE NECESSARY IMAGES.

  Fortunately, I thought to download both. When I did a number of files in the directory images between the full version and the patch, the County came up short for the patch.

  If you have this problem, get your hands on the full release 4.1.1.00.23, NOT Patch 13331096and copy these files to image in place. Who sets the we.

• Someone out there who has an ongoing problem with 7 refusing to print, even after that the driver was abandoned and re-installed?

  I have a Toshiba laptop that runs Windows 7 with an HP printer 6 L. I am running Open Office 4.0.0 and the latest version of Adobe Reader. To date, that the system is undesirable! The 6L display test endless pages but refuses to print anything out of system 7. I dropped 6 L Driver, registry & file cleaned up and optimized the system and then reloaded the driver off of the HP site but the system refuses to print. I even went up to turn off the printer for more than 24 hours to try to get the printer to the reduction in the memory and empty the memory to zero to try to kickstart the printer to pick up the 7 material systems. Up to present all this for nothing. 6L memory is fixed at 1 024 Ko and the document larger than I tried to print has been 136 k so the memory capacity must be nothing. Anyone, anyone, outhere who can help, please. I'm ready at this stage to give up the printer with an AX, since it is now beyond the frustration and get into madness! I must also stress that the 7 system also creates a (1 copy) in the printer Panel. There is no need too!

  Hi Mike,.

  Do you have an error message when you try to print from the Windows 7 computer?

  I suggest to refer to the following article and follow the steps.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can also follow the steps in the following article.

  HP LaserJet 6L - cannot print from a custom Application Windows

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=ipl00001&lang=en&cc=us&ContentType=SupportFAQ&prodSeriesId=25476

  Reference:

  HP LaserJet 6 L Printer series- Frequently asked questions

  http://h20000.www2.HP.com/bizsupport/TechSupport/DocumentIndex.jsp?ContentType=SupportFAQ&lang=en&cc=us&docIndexId=64178&TaskID=101&prodTypeId=18972&prodSeriesId=25476

  Feel free to get back to us if the problem persists. We would be happy to help you.

• problem with the Finder - files and folders displaying incorrectly

  After acquiring a new iMac, I noticed a problem with the Finder - files and folders are displayed wrong (see table).

  This is what happens always after the files have been transferred from one folder to another. I was reminded of my days of using Mac OS in the 1980s when automatic setting of files was not so "automatic." I use Mac OS for decades and I don't remember the last time I had to think about GUI problems like that.

  Other problems in the graphical display of files and folders were introduced, such as when you have hundreds of files in a single folder, you end up deleting about 30 to 40 of them say in a particular section, and you end up with gaps of the ChartSpace where files used to be, that is the remaining files automatically rearrange themselves (fill in these gaps) - never. A week later, you open the folder, and the gap of GUI is still there.

  I decided to do a clean install of the operating system but nothing works.

  Is there some setting in Prefs I'm missing?

  

  Hi there highland99,

  Looks like your folder icons are not accommodating themselves automatically you plan to do. To me, this indicates that you have organize by the None value in the view menu. You can change the way files and folders are prepared automatically by clicking on view > reorganize by and selecting how you would like that fixed.

  Thank you for using communities of Apple Support.

• problems with. ARW files and invigorating auto

  problems with. ARW files and invigorating auto

  I'll try to explain this, because this has happened in past and never found a way to solve, but I lived with it

  now that I have a Sony A7R the problem is more serious

  First I'm proud he realize the image in camera, I use DRO lvl 5 to get enough light, as when I'm shooting at dusk. DRO desire to do HDR but in a single file, it lightens the dark colors. in my camera, I'm happy with the results

  but when I download on lightroom, they come out almost black.

  Let me explain

  Let's say I have import 100 images

  I'll double check my preferences and everything is turned OFF when you want to import options, there is no auto toning, nothing.

  import the images I see glimpses in miniature that looks very good.

  I double click on one to enlarge, we go out so grid view.

  for a short 1 or 2 seconds, I see the full image in all its glory but that lightroom is doing something funny, it darkens the image

  an as she inspects every image, it was a DRO picture, it's too dark.

  to make this clear, the image is perfect, as it was in the beginning but after a few seconds, lightroom for some reason some think should be corrected.

  How we prevent lightroom to do this, I want the image exactly as it is, why lightroom must apply a correction >?

  I think we should do something with the interpretation of the raw file and lightroom applies its own algorithm.

  but here is what I get... until lightroom makes the change that I am able to testify the image exactly as he took and want unchanged...

  now, I have to edit each file or find a profile to which is added the work.

  any ideas how to prevent the ruin my lightroom images and just leave them as they were during the first time...

  There are 2 phases... it is when it imports initially and they look very well

  second are analysis each image and application of some type of toning that it darkens too.

  Thanks for the help

  Sorry, it's the yahoo email auto-reply message.

  I've now disabled

  thing is, there is no DRO jpg to download from the camera

  his only ARW. so my understanding is when I use the DRO setting, the camera makes changes to the ARW lightroom this bed somehow the ARW.

  but he comes back and unfortunately no DRO setting.

  because I noticed that if I take a normal image in his dark raw mode but if I apply dro to it, it comes out more bright, yet when I d/l the camera image in lightroom, which is an ARW - there no jpg files. Lightroom decides to BUMBLE

  So actually there is no interest to use DRO because when I download lightroom deletes.

  is there a way to tell lightroom to preserve the jpg preview as seen first.

  his right blade, image appears perfect... that lightroom do something, that bam, its ruin.

  What should I do to prevent ruin the image of lightroom? If it was good in the first place.

• Problem with the executable files

  Hello all, I need a help from you...

  I use LV 2009 SP1 Professional Development Suite on Windows Seven and I have a problem with the executable files, a problem that I have ever found with other versions of LV (8.x, for example) and I'm a little surprised...

  In the attachment you will find an example of what I mean.

  There are two base screws, the main one (prova) and a Subvi (provasubvi). The main vi launches the Subvi and the Subvi simply create a chart. As you can see on the screws works fine, without any kind of problem.

  I also created the exe file, without specifying that no particular option... and 'magic' of the application does not work as I want. In particular, it seems that the Subvi is running, but the front panel will not be accessible.

  I also try to play with the Subvi construction structure and options, but nothing change.

  Did you ever solve something like that?... I would say that I thank you in advance for any suggestion...

  Andrea

  Hello andrea,.

  Looking at your project I've heard that you do not include the Subvi during the build of the project. SO I slightly modified. Please find the attachments.

  Thank you and best regards,

  srikrishnaNF

• Windows 7. I recently had problems with loss of internet connection. When I have trouble Shooting, told me that impossible to find a driver.

  I have a desktop running Windows 7 PC.  I recently had problems with loss of internet connection.  When I have trouble Shooting, told me that impossible to find a driver.  The adapter does not appear in Device Manager.  Help!

  Hello

  Definitely looks like a problem with the network device. Check with sound
  Support, their books online, the drivers and ask in their forums (if any)
  on known problems. If there is a control of the device shipped with the system
  Manufacturer (manufacturer of motherboard for customized systems). If a device check separated
  with the support of its creator and other resources.

  You could also remove or disable the device and try a new add-on as one
  new card or device USD. None of those who are dear.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Still having problems with my perpetual license Adobe CS6 after CC

  Hi everyone, I still have problems with my perpetual license Adobe CS6 after upgrade to CC and terminate my subscription. I did it in October, and of course he had regained all my applications CS6, making it unavailable. I was advised to uninstall my Adobe (CS6 and CC) software and then reinstall my CS6 collection here. I did and as it has helped my Photoshop, all my other apps still get the same dialog box, I received before; telling me to renew my subscription to the CC. It will not happen, all I want is work and back collection CS6. Any help would be appreciated.

  After uninistalling cc, you should vacuum by the use of the Adobe Creative Cloud cleaning tool to solve installation problems, restart your computer and then install cs6.

  you might try starting the vacuum now (to clean the cc) after installing cs6 to see if that helps.

  Open your problematic cs6 programs, and then click Help > activate.

• Problems with the audit files!

  Hi friends,
  
  We are facing a problem with the audit files we have a runnning on oracle 10g server and being an Institute of teaching many ppl to connect to the server and too much work with SQL and PL/SQL. We have disabled the option to audit the database, but the audit files grow enormous in size. May I know what can be the problem and how to fix that there could be something that we would have missed.
  
  Kind regards
  Maury

  There is no setting of "verification". Display the values of

  AUDIT_FILE_DEST, AUDIT_SYS_OPERATIONS, AUDIT_TRAIL.

  I don't know 'NULL' as the value for each of these parameters.

  Werner

• Of Nikon NEF files turn black after that importation is complete but visible in the bridge, PS, ARC and Win Explorer.

  I don't know if this has been asked recently, but I have another problem of import. I use the latest version of LR and Win 10:Lightroom version: CC 2015.2.1

  Hi wagga9

  Greetings!

  Of Nikon NEF files turn black after that importation is complete but visible in Bridge, PS

  It is a known problem and our team works about it.

  Please follow this link https://helpx.adobe.com/lightroom/kb/thumbnails-display-black-in-lightroom-6-2.html

  Here's a double thread:-images black turning Lightroom

  Let us know if this helps

  ~ Assani

• The place most frequent that I need to connect to a BT hotspot has a problem with the nearest hotspot. Although many sites come they are security protected.

  Access to the BT hotspots.

  The place most frequent that I need to connect to a BT hotspot has a problem with the nearest hotspot. Although many sites come they are protected from security and only the nearest BT hotspot is displayed. There are many others, but they are invisible. I think that there is a software that allows you to see several hot spots the. BT are unable to give me the details.

  This is probably a function of the driver for your wireless card.  I would check with the manufacturer of the computer or adapter.

  Good luck.

• I have a problem with a Gamehouse game. Talked to them and they say that it is a problem of compatiablity with Vista.

  I have a problem with a Gamehouse game

  Talked to them and they say that it is a problem of compatiablity with Vista. It's Super Jigsaw Puzzle and I the hours worked in several puzzles and now when I try to go inside he closes Super Puzzle. This is frustinating because I've uninstalled and reinstalled the program 3 times, it does not help. Is that what I can do to fix this problem in Vista? I have all the updates except IE 8.  We like IE7, but all the other updates sent we have.

  If it is a program downloaded and installed, read this:

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on setup.exe O run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• There is a problem with the driver for a wireless adapter that if it is not compatible or not supported

  My grandmother came to visit me in Belgium and brought her laptop with her. It is Windows 7 and I bought in Ukraine. Thus, she cannot use wireless internet at my place. Troubleshooting scan says there is a problem with the driver for a wireless adapter that is it is not compatible or not supported, something like that. All sound systems are in Russian is not easy for me to explain it. Is it possible to fix this problem or she can't use her laptop to go on the net at all? Thank you!

  If it's a driver fault, can go you on another pc to work to manufacturers support web site for the 'Ukraine' pc and see if the wireless drivers are available there. If they are, download the latest compatible drivers for your pc and transfer them to it by a stick of memory from SD or USB and then install them.

  This may be due to a setting of your network security wireless, for example, that is your network is set to WPA2 but pc does not support. Check configurations for compatibility with your router wireless sound.

  See if anything here help - http://windows.microsoft.com/en-us/windows/setting-wireless-network#1TC=windows-7

  At worst, is it not possible to connect via a cable to your router, esp, if is only a visit to sound.

• Hi guys, I had a problem with the monthly payment, it is written that my credit card data are no longer available, but my credit card is still valid until the 04.16 I olny a few days to fix this, is there another way to make a payment?... and h

  Hi guys, I had a problem with the monthly payment, it is written that my credit card data are no longer available, but my credit card is still valid until the 04.16 I olny a few days to fix this, is there another way to make a payment?... and how I can do?

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• I work with a third-party provider that adds agricultural markets that will update every 10 minutes on my site of muse. I'm a designer by trade, and they are the html code. They have problems with my original design elements being pushed around when they

  I work with a third-party provider that adds agricultural markets that will update every 10 minutes on my site of muse. I'm a designer by trade, and they are the html code. They have problems with my original design elements being pushed around when they add the js include. They recommend at this time that I use another program like Wordpress, but I won't do that, because a large part of the site is designed and just add the markets. Here is the link to the site. At this point, the home page is the question. I can also provide a screen shot of how markets are supposed to look like

  This part does not seem too difficult.

  I bet they are now trying to "knit" their share of data right in your Muse- generated page, and they tell you that your code is terrible (and their smells like daisies). The usual clash...

  But it might be easier for you (and many others) if they offer their content as a separate page of small, so you can incorporate it as an iframe tag in an HTML object in Muse. No matter what code for permission to host the iframe, could be inserted as a simple script in Panel of Options of Page of Muse.